Answer:
huhhhhhhhhj
hshshhshshshshshsh
The Lewis electron-dot structure of oxygen has how many dots?
Answer:
Oxygen has 6 valence electrons and follows the octet rule.
If you were drawing a lewis structure for O2, there would be a total of 12 valence electrons (6 x 2 = 12).
The completed structure would have a double bond between the two oxygen atoms with 2 lone pairs per oxygen, giving you a total of 8 electrons that are lone pairs (or dots).
When the Northern Hemisphere is tilted ________the Sun, the sunlight is _________ direct than it is in the Southern Hemisphere. (Select all that apply.)
away from; less
toward; more
toward; less
away from; more
toward, more
away from, less
Explanation:
When the northern hemisphere is tilted toward the sun, the sunlight is more direct than it is in the southern hemisphere. This explains why it's wintertime in Australia while at the same time, it's summertime in the US.
When the northern hemisphere is tilted away from the sun, the sunlight is less direct than it is in the southern hemisphere. This explains why it's summertime in Australia while it's wintertime in the US.
what is the product of the following reaction? Cd+Znso
A. Zn+CdSO4
B. H2+CdSO4
C. H2+ZnSO4
D. H2+Zn
E. No reaction
Answer:
Cd + ZnSO4 -----> Zn + CdSO4
Explanation:
:)
What are the two parts of the third Step?
O Plug and solve
O Formula and solve
O Show work and solve
O Question and show work
Answer:
A
Explanation:
Answer:
I'm not quite sure what the question is. What is the third step? I think I can help, would you mind commenting what the third step is? :)
Explanation:
How many moles are present in a sample of HCI with a mass of with a mass of 3.65g?
Answer:
number of moles = 0.1001 mol
Explanation:
number of moles = mass/molar mass
number of moles = 3.65g / 36.459 g/mol
n = 0.1001 mol
2.When copper (II) nitrate reacts with sodium hydroxide, copper (11) hydroxide is produced.
How many grams of copper (11) hydroxide can be prepared from 2.7 g of copper (II) nitrate
reacting with sodium hydroxide?
Answer:
2Cu + S ~~~> Cu2S Copper (C) reacts with sulfur (S) to form copper sulfide as shown in the equation. A scientist adds 12.7 grams of Cu to 3.2 grams of S to start the reaction.
Explanation:
How many moles of Magnesium(Mg) are
in 2.46 x 10^28 atoms of Magnesium?
so 2.46 X 10^28 contains (2.46 X 10^28)/(6.02 X 10^23) =
(2.46 X 10 X 10^27)/ (6.02 x(10^23) = (24.6/6.02) X 10^ (27-23)=
4.09 X 10^4 = 40,900
Answer:
4.09 X 10^4 = 40,900 moles
Explanation:
How many moles of Magnesium(Mg) are
in 2.46 x 10^28 atoms of Magnesium?
PLEASE LEARN THIS FUNDAMENTAL RULE OF CHEMISTRY...1 MOLE OF ANYTHING CONTAINS AVOGADROS NUMBER OF PARTICLES}
6.02 X 10^23.09
so 2.46 X 10^28 contains in moles(2.46 X 10^28)/(6.02 X 10^23) =
(2.46 X 10 X 10^27)/ (6.02 x(10^23) = (24.6/6.02) X 10^ (27-23)=
4.09 X 10^4 = 40,900 moles
Why is mining for coal a long-term concern?
A. It is being replenished faster than it can be mined.
B. The supply will eventually be exhausted.
C. New methods of mining need to be developed.
D. The demand for coal is diminishing.
Answer: Is B: the supply will eventually be exhausted.
Explanation:
there is only so much coal in the world as in many other elements. That is why we are looking for more appropriate and resourceful way of supplying energy and it is a lot safer for the workers involved
As coal is a nonrenewable source of energy so its supply will eventually be exhausted. Therefore, option (B) is correct.
What are nonrenewable sources of energy?Non-renewable energy can be described as energy that comes from fossil fuels such as coal, natural gas, crude oil, and uranium. Non-renewable energy requires human intervention to create it suitable for consumption. Fossil fuels are generally made up of Carbon. Fossil fuels were produced over 300 million years ago.
Non-renewable energy is generally fossil fuels such as coal, oil, natural gas, etc. Fossil Fuels are produced from the remains of animals and plants and can be is divided into three categories.
To produce natural gas from fossil fuels, the decomposition process is longer and conducted with high amounts of pressure and heat. Coal takes millions of years under the crust of the earth to produce through the decomposition of trees, plants, and ferns.
Learn more about nonrenewable sources of energy, here:
https://brainly.com/question/10402348
#SPJ2
60) Which of the following is a chemical property?
A) Sugar is a solid at room temperature.
B) Potassium reacts with water to form potassium hydroxide.
C) Sugar dissolves in water.
D) Gasoline and water do not mix.
.
Answer:
C is the answer. Sugar Dissolves in water
Explanation:
Brainliest Maybe
Sugar dissolves in water is a chemical property. Therefore, option C is correct.
What do you mean by chemical properties ?Chemical properties describe a substance's characteristic ability to react to form new substances; they include flammability and corrosion susceptibility. A pure substance's chemical and physical properties are the same in all samples.
A chemical property is the ability or inability to change one type of matter into another. Chemical properties include flammability, toxicity, acidity, reactivity, and heat of combustion.
A chemical property explain the ability of a substance to undergo a specific chemical change. To verify a chemical property, we look for a chemical change.
Thus, Sugar dissolves in water is a chemical property, option C is correct.
To learn more about the chemical property, follow the link;
https://brainly.com/question/1935242
#SPJ2
PLEASE HELP!!!!! WILL GIVE BRAINLIEST!!!!
The answer should be A
VisibleVisible wave length visible wavelength of light that are emitted by Adams can be used to get Nate explosive devices remotely
How many grams of pure aluminum could be produced from 999 g of aluminum oxide?
Answer:
Explanation:
First, calculate the molar mass of Aluminum Oxide (Al2O3), by multiplying the number of the constituent atoms, by their relative atomic abundances . Inserting the atomic masses into the equation gives you . Then find the percent of Aluminum by mass, in Aluminum Oxide. Finally, set up an equality, where 53.02% of the mass of Aluminum Oxide, is 999 grams of Aluminum
Butanoic acid + 2 propanol
Answer:
Butanoic acid and 2-propanol reacts to form isopropyl butyrate.
Explanation:
brainliest plz
Multiple Choice Question
What do molecules in a bowl of hot soup do?
A. Disperse
B. Evaporate
C. Vibrate
D. Sublimate
Submit
Answer:
Explanation:
i would say not d im not fully sure but id say c
When molecules present in a bowl of hot soup then they do vibration due to high kinetic energy.
What are molecules?Molecules are the example of chain substance, which can be prepared by the addition of two or more than 2 atoms of same or different nature.
In a hot soup bowl, kinetic energy of the molecules present in that soup increases due to which they move with higher velocity and also shows vibration in their mean position.
Hence, option (C) is correct i.e. vibrate.
To know more about kinetic energy, visit the below link:
https://brainly.com/question/19555619
How many mm Hg are there in 2.27 atm?
Answer:
[tex]\huge\boxed{\sf 2.27\ atm = 1,725\ mm\ of\ Hg}[/tex]
Explanation:
We know that:
1 atm = 760 mm of Hg (Standardly)
Multiply both sides by 2.27
2.27 atm = 760 * 2.27 mm of Hg
2.27 atm = 1,725 mm of Hg
[tex]\rule[225]{225}{2}[/tex]
Hope this helped!
~AH1807What is surface tension and why is it important?
Answer:
What is surface tension?
Explanation:
Surface tension and droplets: Surface tension is responsible for the shape of liquid droplets. Although easily deformed, droplets of water tend to be pulled into a spherical shape by the cohesive forces of the surface layer.
Surface tension forces between mucosal surfaces play an important role in the pathogenesis of the disease. The obstruction of upper airway elicit the activation of autonomic nervous system, hypoxemia, and arousal from sleep.
Hope it helps
.. How many seconds will it take for a satellite to travel 650 km at a rate of 220 m/s?
Answer: 3750s Happy To Help
Explanation:
When ice turns into a liquid, this is a __1__ change because __2__.
Answer:
1.physical change because the ice from a solidform cahnged into a liquid form
Guy’s pleaseeee help
Answer:
A. All isotopes have no charge
how are the results of the crosses differ if the red allele was dominant over the white allele? Explain both of the F¹ and F² generations
Answer:
if the red allele is dominant 3 out of 4 offspring will have the red characteristic and 1 out of 4 will have white characteristic
s
Part B
Refer to the observations of the test tubes from part A. Determine which metal (or hydrogen) in each test tube is
more reactive. Remember that the less reactive metal (or hydrogen) will typically end up in pure form as an
element, so no reaction will occur if the less reactive metal (or hydrogen) is the one that begins in pure form
Answer:
More Reactive:
iron
hydrogen
zinc
magnesium
zinc
iron
Explanation:
The reactivity of metals can be determined based on their ability to displace other metals from their compounds or to displace hydrogen from acids. Generally, metals that are higher in the reactivity series can displace metals lower in the series.
1. **Iron & Copper:** Iron is more reactive than copper. If iron is present in its pure form, it would displace copper from its compound.
2. **Copper & Hydrogen:** Hydrogen is less reactive than copper. No reaction will occur if hydrogen is the element in pure form.
3. **Zinc & Iron:** Zinc is more reactive than iron. If zinc is present in its pure form, it would displace iron from its compound.
4. **Iron & Magnesium:** Magnesium is more reactive than iron. If magnesium is present in its pure form, it would displace iron from its compound.
5. **Zinc & Hydrogen:** Hydrogen is less reactive than zinc. No reaction will occur if hydrogen is the element in pure form.
6. **Iron & Hydrogen:** Hydrogen is less reactive than iron. No reaction will occur if hydrogen is the element in pure form.
Remember, the reactivity series is a ranking of metals based on their tendency to lose electrons and form positive ions. Elements higher in the series can displace elements lower in the series from their compounds in certain reactions.
To know more about reactivity of metal:
https://brainly.com/question/20570629
#SPJ3
write the electronic configuration of iron in fecl2 and fecl3
Ferrus is a transition metal.
FeCl_2
Valency of Fe is 2 .Hence Z=26-2=24Electronic configuration is given by
[tex]\\ \sf\longmapsto [Fe]^{2+}=1s^22s^22p^63s^23p^64s^23d^4[/tex]
FeCl_3
Valency of Fe is 3Hence Z=26-3=23Electronic configuration is given by
[tex]\\ \sf\longmapsto [Fe]^{3+}=1s^22s^22p^63s^23p^64s^23d^3[/tex]
Using the provided table and the equation below, determine the heat of formation (in kJ/mol) for CuBr₂.
CuCl₂ (s) + Br₂(l) → CuBr₂ (s) + Cl₂ (g) ∆H° = 64.1 kJ/mol
CuCl2= -205.9 kJ/mol
Br2= 0 kJ/mol
Cl2= 0 kJ/mol
The heat of formation of CuBr₂ (s) = -141.8 kJ/mol
The heat of reaction ΔH = ∑ΔHproducts - ∑ΔHreactants
ΔH = ΔHCuBr₂ (s) + ΔHCl₂ (g) - [ΔHCuCl₂ (s) + ΔHBr₂(l)]
where ΔHCuBr₂ (s) = heat of formation of CuBr₂ (s), ΔHCl₂ (g) = heat of formation of Cl₂ (g) = 0 kJ/mol, ΔHCuCl₂ (s) = heat of formation of CuCl₂ (s) = -205.9 kJ/mol, ΔHBr₂(l) = heat of formation of Br₂(l) = 0 kJ/mol and ΔH = heat of reaction = 64.1 kJ/mol
Substituting the values of the variables into the equation, we have
ΔH = ΔHCuBr₂ (s) + ΔHCl₂ (g) - [ΔHCuCl₂ (s) + ΔHBr₂(l)]
64.1 kJ/mol = ΔHCuBr₂ (s) + 0 kJ/mol - [-205.9 kJ/mol + 0 kJ/mol]
64.1 kJ/mol = ΔHCuBr₂ (s) + 0 kJ/mol + 205.9 kJ/mol - 0 kJ/mol
64.1 kJ/mol = ΔHCuBr₂ (s) + 205.9 kJ/mol
ΔHCuBr₂ (s) = 64.1 kJ/mol - 205.9 kJ/mol
ΔHCuBr₂ (s) = -141.8 kJ/mol
So, the heat of formation of CuBr₂ (s) = -141.8 kJ/mol
Learn more about heat of formation here:
https://brainly.com/question/13925548
what mass of water (in grams) is produced by the reaction of 23.0 g of SiO2?
The mass of water produced by the reaction of the 23 g of [tex]SiO_2[/tex] is 13.8 g.
The given chemical reaction;
[tex]4Hf (g) \ + \ SiO_2 (s) \ --> \ SiF_4(g) \ + \ 2H_2O(l)[/tex]
In the given compound above, we can deduce the following;
molecular mass of [tex]SiO_2[/tex] = 28 + (2 x 16) = 60 gmolecular mass of [tex]2H_2O[/tex] = 2(18) = 36 g60 g of [tex]SiO_2[/tex] --------- 36 g of water
23 g of [tex]SiO_2[/tex] ------------- ? of water
[tex]mass \ of \ water = \frac{23 \times 36}{60} = 13.8 \ g \ of \ water[/tex]
Thus, the mass of water produced by the reaction of the 23 g of [tex]SiO_2[/tex] is 13.8 g.
"Your question is not complete, it seems to be missing the following information";In the reaction of the given compound, [tex]4Hf (g) \ + \ SiO_2 (s) \ --> \ SiF_4(g) \ + \ 2H_2O(l)[/tex], what mass of water (in grams) is produced by the reaction of 23.0 g of SiO2?
Learn more here:https://brainly.com/question/13644576
Describe the structure and bonding in aluminium metal.
Answer: Metallic bonding.
Explanation: Aluminum forms metallic bonds with itself. This results in a metallic lattice structure.
Aluminum is found in the 13 group of periodic table and it mostly forms ionic bonds with metal. The structure of Aluminum is Orthorhombic mainly.
What is element?
Element generally consist of atoms or we can atoms combine to form element. Atoms of an element is always same, means all the properties of all atoms of one type of element is same. Two or more than two atoms with different physical or chemical properties can not combine together to form an element.
The structure of Aluminum is Orthorhombic and it contains high neutron capture cross section. It is very stable in dry air but oxidizes in moist air. It reacts with oxygen to form Al₂O₃.Valence of Aluminum is III. Its electronic configuration is [Ar]3d¹⁰ 4s² 4p¹
Thus structure of Aluminum is Orthorhombic and metallic bond is formed by Aluminum
To know more about element, here:
https://brainly.com/question/8460633
#SPJ2
define the term chemotherapy.
I'm not able to understand that what is written in the pic.. As I can't understand this language..
Treatment that uses drugs to stop the growth of cancer cells, either by killing the cells or by stopping them from dividing. Chemotherapy may be given by mouth, injection, or infusion, or on the skin, depending on the type and stage of the cancer being treated.
What physical and chemical properties would an antique dealer use to determine the substance that makes up a
piece of jewelry?
Answer:
Characteristics such as melting point, boiling point, density, solubility, color, odor, etc. are physical properties. Properties that describe how a substance changes identity to produce a new substance are chemical properties. ... Physical and chemical properties can be used to classify a substance as ionic or molecular.
When a sample of iron ore of mass 2.016 g is treated with 50.0 mL of hydrochloric acid, the iron dissolves in the acid to form a solution of . The solution is diluted to 100.0 mL and the concentration of ions is determined by spectrometry to be . What is the mass percentage of iron in the ore
What scientific term is a well-tested explanation for a set of observations or experimental results?
law
theory
method
conclusion
Answer:
b) theory
Explanation:
Answer:
theory or, conclusion is the answer
Please answer question (e)
Answer:
I don't know sorry am read in 5 class
Some chemicals, most often inorganic salts, in the laboratory have the nasty tendency to absorb water from the atmosphere. This property is called hygroscopicity. Anhydrous (water-free) Cupric Perchlorate [Cu (ClO4)2] weighs 262.447g/mol, but after sitting on out on the bench top absorbs water from the air and now weighs 370.540g/mol. How many water molecules did our Cupric Perchlorate absorb?
If an anhydrous Cupric Perchlorate weighs 262.447g/mol initially and weighs 370.540 g/mol after sitting on the bench to absorb water from the air, the number of water molecules absorbed would be 6 moles.
First, let us calculate the amount of water gained during the course of staying on the bench:
Water gained = weight after gaining water - initial weight
= 370.540 - 262.447
= 108.093g/mole
The total amount of water gained per mol is 108.093. Each water molecule weighs 18.015 g/mole. Thus, the total number of water molecules that will sum up to 108.093 would be:
108.093/18.015 = 6 moles
In other words, the number of water molecules absorbed by the Cupric Perchlorate is 6 moles.
More on calculating water of hydration can be found here: https://brainly.com/question/919417
