Answer:
0.17 kgExplanation:
The mass of the object can be found by using the formula
[tex]m = \frac{f}{a} \\ [/tex]
f is the force
a is the acceleration
From the question we have
[tex]m = \frac{2}{12} = \frac{1}{6} \\ = 0.166666...[/tex]
We have the final answer as
0.17 kgHope this helps you
Question 6 (1 point)
Hydrogen gas and nitrogen gas can react to form ammonia according to this equation: N2 (g) + m 3H2 (g) --> 2NH3(g) How many liters of nitrogen gas are required to produce 4 moles of NH3 (g)? Assume conditions of standard temperature and pressure (STP). Hint: One mole of gas occupies 22.4 liters under standard conditions of temperature and pressure (STP).
Answer:
44.8 L of N₂.
Explanation:
We'll begin by writing the balanced equation for the. This is illustrated below:
N₂ + 3H₂ —> 2NH₃
From the balanced equation above,
1 mole of N₂ reacted to produce 2 moles of NH₃.
Therefore, Xmol of N₂ will react to produce 4 moles of NH₃ i.e
Xmol of N₂ = (1 × 4)/2
Xmol of N₂ = 2 moles
Thus, 2 moles of N₂ reacted to produce 4 moles of NH₃.
Finally, we shall determine the volume of N₂ required for the reaction. This can be obtained as follow:
1 mole of N₂ occupies 22.4 L at STP.
Therefore, 2 moles of N₂ will occupy = (2 × 22.4) = 44.8 L
Thus, 44.8 L of N₂ is needed to produce 4 moles of NH₃.
can u pls help me with this question
What are some ways to prevent heat energy loss in matter?
Answer:
Use less heat in your house.
Explanation:
You have blankets in your house, huddle up for a good movie together.
Answer:
Simple ways to reduce heat loss include
Heat loss through windows can be reduced by using double glazing
Heat loss through walls can be reduced using cavity wall insulation
Heat loss through the roof can be reduced by laying loft insulation
Explanation:
What is the mass of 4.42 cm3 of platinum? The density of platinum is 22.5 g/cm3. (Sig Fig rules + units)
Answer: 99.45 g
Explanation: we have 22.5 g of Platinum in every 1cm3 of Platinum so if we take 4.42 cm3 of Platinum we will have 4.42 × 22.5 g = 99.45 g of Platinum
4. How many moles of oxygen gas are needed to react completely with
3.0 moles of C2,H6.?
Hey there!:
Mole ratio :
2 C₂H₆ + 7 O₂ → 4 CO₂ + 6 H₂O
2 moles C₂H₆ -------------------- 7 moles O₂
3.0 moles C₂H₆ ------------------ moles O₂ ??
moles O₂ = 3.0 x 7 / 2
moles O₂ = 21 / 2
moles O₂ = 10.5 moles of O₂
Hope this helps!
Do you think climate change is a hoax or is it a scientifically valid disrupter of
ecosystems?
Answer:
it is actually valid.
Explanation:
Take a look at the arctic for example. Global warming caused a change within that climate. Icebergs are melting and predators such as polar bears are losing their food sources. They may soon go extinct.
Answer:
Climate change is a scientifically valid disrupter of exosystems. People need to do something to change their actions or we won't have a future to live in. We don't need to end emissions but completly halt all fossil fuel exploration and extraction now and completly divest from fossil fuels all together.
DO NOT COPY
Two Balloons one filled with hydrogen gas and second filled with neon gas. what gas should be used in an experiement to identify the element in each balloon?
Answer:
Oxygen
Explanation:
If two balloons are filled with hydrogen gas and helium gas respectively, then we want to identify what gas is in each balloon, we have to do so by exposing the both balloons to flame in an oxygen atmosphere.
Hydrogen combines with oxygen in the presence of a flame with quite a loud sound and the flame is sustained but when a flame is brought near helium gas in a balloon, the gas will only make a little sound when exposed to the flame and extinguish the flame.
The reason for the explosion of the gas in the hydrogen balloon is that combustion of hydrogen gas is exothermic. The heating up of surrounding air molecules leads to a sudden explosion.
However, the helium balloon makes a little sound when the balloon is ruptured releasing helium gas which extinguishes the flame.
standard form to scientific notation: 0.004078

If you have a gas sample with an initial pressure of 4 atm and a volume of 550 L, what will the final volume be if you change the pressure to 2.3 atm?
Answer:
V₂ = 956.52 L
Explanation:
Given data:
Initial pressure = 4 atm
Initial volume = 550 L
Final volume = ?
Final pressure = 2.3 atm
Solution:
The given problem will be solved through the Boyle's law,
"The volume of given amount of gas is inversely proportional to its pressure by keeping the temperature and number of moles constant"
Mathematical expression:
P₁V₁ = P₂V₂
P₁ = Initial pressure
V₁ = initial volume
P₂ = final pressure
V₂ = final volume
Now we will put the values in formula,
P₁V₁ = P₂V₂
4 atm × 550 L = 2.3 atm × V₂
V₂ = 2200 atm. L/ 2.3 atm
V₂ = 956.52 L
If you somehow subtracted a proton from a Zirconium atom, it would be?
Answer:
Yttrium
Explanation:
If you somehow subtracted a proton from a Zirconium atom, it would become a Yttrium atom.
When the number of protons in an atom changes a new element is directly formed. The difference between one atom and the other is the based on the number of protons they contain.
Therefore, when Zirconium loses a proton, it changes to Yttrium which is the atom before Zirconium.
Such reactions as this are very common with nuclear reactions. During a nuclear reaction, the nucleus of an atom changes stability.
Why is solid potassium chloride a not good conductor of electricity
Answer:
The charge carriers can be electrons, as in metals, or positive and negative ions in the case of ionic (or electrolytic) conductors. In a crystalline solid, the potassium and chlorine atoms are ionically-bonded within a crystalline matrix that prevents them from easily moving.
Explanation:
KCI is a molecule. True or False
Answer: duh
Explanation:
A student working in the laboratory produces 6.81 grams of calcium oxide, CaO, from 20.7 grams of calcium
carbonate, CaCO3, according to the reaction CaCO3 → CaO + CO2. Calculate the theoretical yield and
the percent yield for the reaction. Show and/or explain your work.
Answer:
Percent yield = 57.8 %
Theoretical yield = 11.781 g
Explanation:
Given data:
Mass of CaO produced = 6.81 g
Mass of CaCO₃ react = 20.7 g
Theoretical yield = ?
Percent yield = ?
Solution:
Chemical equation:
CaCO₃ → CaO + CO₂
Number of moles of CaCO₃ :
Number of moles = mass/molar mass
Number of moles = 20.7 g/ 100.1 g/mol
Number of moles = 0.21 mol
Now we will compare the moles of CaCO₃ with CaO.
CaCO₃ : CaO
1 : 1
0.21 : 0.21
Theoretical yield of CaO:
Mass = number of moles × molar mass
Mass = 0.21 mol × 56.1 g/mol
Mass = 11.781 g
Percent yield:
Percent yield = ( actual yield / theoretical yield ) × 100
Percent yield = (6.81 g/ 11.781 g) × 100
Percent yield = 57.8 %
Which statement describes a similarity between conductors and insulators?
They both allow for the free flow of electrons between atoms.
They can both be made without matter.
They both involve high resistance to electrical charge.
They can both be used in an electric circuit.
Answer:
They can both be used in an electric circuit.
Explanation:
Though conductors and insulators are very different from each other but still they have a similarity that "they can both be used in an electric circuit".
Conductors are the material that allows electricity to flow and insulators have high resistance and do not allow electricity to flow.
Both conductors and insulators are used in an electric circuit as conductor is used in wires, batteries and bulb to flow current while insulators are used in insulation of wire, switches, plugs and etc. Combination of them makes the circuit shock free.
Hence, the correct answer is "They can both be used in an electric circuit."
Answer:
They can both be used in an electric circuit.
Explanation:
Match the words in the column to the appropriate blanks in the sentences.
a. negative
b. liquid
c. positive
d. solid
The phase with the greater density is___________ argon because the liquid slope of the solid/liquid equilibrium line (also called the fusion curve) is________ meaning that an increase in pressure on ___________argon will result in the formation of __________argon.
Answer:
[tex]The \ phase\ with \ the \ greater \ density \ is \ \ \mathbf{Solid } \ \ argon \ because \ the \ liquid[/tex]
[tex]slope \ of \ the \ solid/liquid \ \ equilibrium \ \ line \ (also \ called \ the \ fusion \ curve) \ is \ \ \mathbf{positive}[/tex]
[tex]meaning \ that \ an \ increase \ in \ pressure \ on \ \ \mathbf{liquid } \ \ argon \ will \ result \ in \ the[/tex]
[tex]formation \ of \ \ \mathbf{solid} \ \ argon.[/tex]
Explanation:
A phase diagram is a graphical representation with axes, representing temperature and pressure, showing the equilibrium conditions of a given substance to be a solid, liquid, or gas.
From the information given, the substance here is Argon.
So, the phase diagram of Argon can be seen in the image below.
From the diagram, it is obvious that the slope of the fusion curve is positive. Hence, the density of the solid argon will be greater than that of the liquid argon.
How many moles are equal to 13.25 g of water, H2O?
Answer:
0.736 moles
Explanation:
mole = mass/molecular mass
mole of H2O = 13.25/18.0
mole of H2O = 0.736
The position of hydrogen is controversial in mendeleevs periodic table?
how many elements are in 4AI2(SO3)3
Answer: 3
Explanation:
What is the degree of sugar dissociation?
Answer: Na+ (8%)
Explanation:
If the average basal rate of oxygen consumption for an adult is 15 L/hour, then calculate how many hours of oxygen use will you get from the 4.7 L tank? Round your answer to 1 decimal place.
Answer:
0.3 hours of oxygen use will be obtained from the 4.7 L tank.
Explanation:
The rule of three or is a way of solving problems of proportionality between three known values and an unknown value, establishing a relationship of proportionality between all of them. That is, what is intended with it is to find the fourth term of a proportion knowing the other three.
To solve a direct rule of three, where a, b and c are known data and x is the value to be calculated the following formula must be followed:
a ⇒ b
c ⇒ x
So [tex]x=\frac{c*b}{a}[/tex]
A value of 15 L/hour indicates that 15 L is consumed in 1 hour. The following rule of three can then be applied: if the average basal rate of oxygen consumption for an adult is 15 L in 1 hour, then 4.7 L in how long will it be consumed?
[tex]time=\frac{4.7 L*1 hour}{15 L}[/tex]
time= 0.3 hours
0.3 hours of oxygen use will be obtained from the 4.7 L tank.
g Give the electron configurations for the following atoms. Do not use the noble gas notation. Write out the complete electron configuration. Example: Mg 1s22s22p63s2 Element Electron configuration Ne Li N S Sc
Answer: [tex]Ne:1s^22s^22p^6[/tex]
[tex]Li:1s^22s^1[/tex]
[tex]N:1s^22s^22p^3[/tex]
[tex]S:1s^22s^22p^63s^23p^4[/tex]
[tex]Sc:1s^22s^22p^63s^23p^64s^23d^1[/tex]
Explanation:
Electronic configuration represents the total number of electrons that a neutral element contains. We add all the superscripts to know the number of electrons in an atom. The electrons are filled according to Afbau's rule in order of increasing energies.
The electronic configuration for given elements is as follows:
[tex]Ne:10:1s^22s^22p^6[/tex]
[tex]Li:3:1s^22s^1[/tex]
[tex]N:7:1s^22s^22p^3[/tex]
[tex]S:16:1s^22s^22p^63s^23p^4[/tex]
[tex]Sc:21:1s^22s^22p^63s^23p^64s^23d^1[/tex]
Suppose you are collecting a gas over water at 23 oC and obtain a pressure reading of 785.8 mm Hg. If the vapor pressure of water is 21.1 mm Hg at the collection temperature, what is the pressure of the collected gas
Answer:
764.7 mmHg
Explanation:
Step 1: Given data
Total pressure of the gaseous mixture (P): 785.8 mmHgPartial pressure of water vapor (pH₂O): 21.1 mmHgPartial pressure of the gas collected (pGas): ?Step 2: Calculate the partial pressure of the gas collected
The total pressure of the gaseous mixture is equal to the sum of the gas collected and the water vapor.
P = pH₂O + pGas
pGas = P - pH₂O
pGas = 785.8 mmHg - 21.1 mmHg = 764.7 mmHg
can u pls help me with this question
Answer:
B
Explanation:
Which of the following is true of a balanced chemical equation?
A) The total number of molecules of reactants has to be the same as the total number of product molecules
B) the total number of atoms in the reactant molecules doesn't have to equal the total number of atoms in the product molecules
C) The identity of the atoms in the reactants has to be the same as the identity of the atoms in the products
D) The physical state of the reactants has to be the same as the physical state of the products
Answer:
A) The total number of molecules of reactants has to be the same as the total number of product molecules
Explanation:
In chemistry, a chemical equation consists of reactants and products. The reactants are the compounds/substances that chemically combine to give rise to the products. According to the law of conservation of mass, a chemical equation needs to be BALANCED.
A chemical equation is said to be BALANCED when the number of atoms/molecules on the reactant side is equal to that on the product side. In other words, total number of molecules of reactants has to be the same as the total number of product molecules
After sugar dissolves in water, the sugar is no
longer visible. The mixture tastes sweet so
you know the sugar is still there.
Why can't you see the sugar anymore?
Justify your answer.
Answer:
Because it devolved
Explanation:
The sugar can no longer be seen because upon solubilization;
A large collection of sugar molecules break into individual molecules and disperse in the water. Additionally, the lattices of the crystalline sugar has been broken, consequently, rendering the sugar soluble in water.Definition:
Solubility is characterized by the formation of new bonds between the solute molecules and solvent molecules.
In this case; the solute is sugar while the solvent is Water.
PS: The mixture formed from sugar and water is called Sugar syrup.
Read more:
https://brainly.com/question/24671587
how many grams from a 100 grams sample of fe2o3 is iron
Answer:
40 Grams
Explanation:
Fe2O3 is 2 parts Iron 3 parts Oxygen.
Assuming the molecular weights of both are equivalent (ideal elemental law), it is a 2:3 ratio, or 2/5 of the total.
2/5 of 100 is 40, so the answer is
40 grams
10. All atoms of the same element have the same______
O number of neutrons
O mass numbers
O number of protons
O mass
if you move 60 meter in 10 seconds, what is your speed
the answer was S=d/t = 60/10 = 6m/s, I'm sorry for getting it wrong the first time I answered ^^
I need help asap please help me
Answer:
the answer is the third one the beak
2.
1 point(s)
Which of the following pairs of solutions forms/form a buffer when equal volumes are mixed?
Explanation:
it should be 2:1 that is acid and base combination to the form either acid or base and its conjugate
