1. There is a famous intersection in Kuala Lumpur, Malaysia, where thousands of vehicles pass each hour. A 750 kg Tesla Model S traveling south crashes into a 1250 kg Ford F-150 traveling east. What are the initial speeds of each vehicle before collision if they stick together after crashing into each other and move at an angle of 320 and a common velocity of 18 m/s.

Answer:

About 37.70 radians.

Explanation:

1 revolution = 2[tex]\pi[/tex] radians

∴ 6 revolutions = (6)(2[tex]\pi[/tex] radians)

6 revolutions = 37.6991 or ≈ 37.70 radians

Answer:

i think bro is becuse they want to get money also paying to this app  if i put paying right im latin but that is my opinion and also becuse they want we learn somethings

Explanation:

Answer:

Magnitude = 140 x 10⁻¹² Cm

Direction = upwards

Explanation:

A pair of two equal and opposite point charges forms an electric dipole.

The magnitude of the moment of such dipole is the product of the magnitude of any of the charges (since the charges are the same in magnitude) and the distance of separation between them. i.e

p = q x d          ----------(i)

Where;

p = dipole moment

q = magnitude of any of the charges

d = distance between the charges.

The direction of the dipole moment is from the negative charge to the positive charge.

(a) From the question, the charges are +35 nC and -35 nC, and the distance between them is 4.00mm.

This implies that;

q = 35 nC = 35 x 10⁻⁹C

d = 4.00mm = 4.0 x 10⁻³ m

Substitute the values of q and d into equation (i) to give;

p = 35 x 10⁻⁹C x 4.00 x 10⁻³ m

p = (35 x 4.0) x (10⁻⁹ x 10⁻³) C m

p = 140 x 10⁻¹² Cm

The magnitude of the dipole moment is 140 x 10⁻¹² Cm

(b) From the question, the +35nC charge is above the -35nC charge on a vertical line as shown below;

                         o   +35nC

                          |

                          |

                          |

                          |

                          |

                          |

                         o    -35nC

Since the direction should point from the negative charge to the positive charge, this means that the direction of the dipole moment of the two charges is upwards (due North).

                         o   +35nC

                         ↑

                          |

                          |

                          |

                          |

                          |

                          |

                         o    -35nC

Assuming ideal conditions, Boyle's law says that

P₁ V₁ = P₂ V₂

where P₁ and V₁ are the initial pressure and temperature, respectively, and P₂ and V₂ are the final pressure and temperature.

So you have

(455 mm Hg) (56.5 m³) = (632 mm Hg) V₂

==>   V₂ = (455 mm Hg) (56.5 m³) / (632 mm Hg) ≈ 40.7 m³

Answer:

1.74×10⁻³ m

Explanation:

Applying,

ε = Stress/strain............. Equation 1

Where ε = Young's modulus

But,

Stress = F/A.............. Equation 2

Where F = Force, A = Area

Strain = e/L.............. Equation 3

e = extension, L = Length.

Substitute equation 2 and 3 into equation 1

ε = (F/A)/(e/L) = FL/eA............. Equation 4

From the question,

Given: F = 285 N, L = 29 cm = 0.29 m, ε = 5.00×10⁹ N/m²,

A = πd²/4 = 3.14(0.0011²)/4 = 9.4985×10⁻⁶ m²

Substitute these values into equation 4

5.00×10⁹ = (285×0.29)/(9.4985×10⁻⁶×e)

Solve for e

e = (285×0.29)/(5.00×10⁹×9.4985×10⁻⁶)

e = 82.65/4.74925×10⁴

e = 1.74×10⁻³ m

Answer:

[tex]t_2=10[/tex]

Explanation:

From the question we are told that:

Velocity of both spaceships [tex]V=0.8c[/tex]

Time [tex]t_1=6[/tex]

Generally the equation for time of spaceship 2 through earth is mathematically given by

[tex]t_2=\frac{t_1}{\sqrt{1-v^2}}[/tex]

[tex]t_2=\frac{6}{\sqrt{1-0.8^2}}[/tex]

[tex]t_2=10[/tex]

Answer:

The speed at B is 16.18 ft/s .

Explanation:

Speed at A, u = 11 ft/s

Speed at C, v' = 18 ft/s

Time from A to C = 5 s

Time from B to C = 1.3 s

Let the speed of car at B is v.

Let the acceleration is a.

From A to B

Use first equation of motion

v = u + a t

18 = 11 + a x 5

a = 1.4 ft/s^2

Let the time from A to B is t' .

t' = 5 - 1.3 = 3.7 s

Use first equation of motion from A to B

v = 11 + 1.4 x 3.7 = 16.18 ft/s  

Answer:

a)[tex]L=0.00142H[/tex]

b) [tex]C=2.65*10^{-12}[/tex]

Explanation:

From the question we are told that:

Frequency[tex]F=13kHz[/tex]

Current [tex]I=0.14A[/tex]

Capacitor[tex]C_e=1.4*10^{-5}J[/tex]

Generally the equation for Energy in the inductor is mathematically given by

Where L is now subject

[tex]L=\frac{2C_e}{I^2}[/tex]

[tex]L=\frac{2*1.4*10^{-5}}{(0.14)^2}[/tex]

[tex]L=0.00142H[/tex]

Generally the equation for Value of Capacitor is mathematically given by

[tex]C=\frac{1}{(2 \pi f)^2} L[/tex]

[tex]C=\frac{1}{(2 3.142 13*10^3Hz)^2} *0.00142[/tex]

[tex]C=2.65*10^{-12}[/tex]

Answer:

the answer is push example: she thrust her hand into her pocket

Answer:

It's electricity produced from hydropower. It's also a form of energy that controls the power of water motion.

Explanation:

One pro about hydroelectric power is that it's renewable energy. But one con about hydroelectric power is that it can impact the environment in a negative way.

Answer:

  E = 1.25 MV / m

Explanation:

For this exercise let's use Newton's second law

          F = m a

where the force is electric

          F = q E

we substitute

          q E = m a

          E = m a / q

indicate there are 500,000 excess electrons

          q = 500000 e

          q = 500000 1.6 10⁻¹⁹

          q = 8 10⁻¹⁴ C

the mass is m = 10⁻¹¹ kg and the acceleration a = 10⁴ m / s²

let's calculate

          E = 10⁻¹¹ 10⁴ / 8 10⁻¹⁴

          E = 0.125 10⁷ V / m = 1.25 10⁶ V / m

          E = 1.25 MV / m

The disadvantages of simple cell are: It is not rechargeable. The battery needs to be disposed of after all the power has been used up. It can't produce electricity anymore. That is why, why think before you use a simple cell.​

A battery designed to be used only once is called a simple cell.  Small gadgets used in the house are frequently powered by simple cells.

The benefits of a simple cell include:

Among the drawbacks of a simple cell are:

Learn more about cell here:

https://brainly.com/question/30046049

#SPJ2

Answer:

 law of conservation of energy states that the total energy of an isolated system remains constant; it is said to be conserved over time.

Answer:

The correct solution is "37.5 km".

Explanation:

Given:

Distance between the trains,  

d = 75 km

Speed of each train,

= 15 km/h

The relative speed will be:

= [tex]15 + (-15)[/tex]

= [tex]30 \ km/h[/tex]

The speed of the bird,

V = 15 km/h

Now,

The time taken to meet will be:

[tex]t=\frac{Distance}{Relative \ speed}[/tex]

  [tex]=\frac{75}{30}[/tex]

  [tex]=2.5 \ h[/tex]

hence,

The distance travelled by the bird in 2.5 h will be:

⇒ [tex]D = V t[/tex]

        [tex]=15\times 2.5[/tex]

        [tex]=37.5 \ km[/tex]

Answer:

opinion a

Explanation:

the si units of distance is metre (m)

Answer:

A

Explanation:

Answer:

It will travel Vx * t = 30 m/s * 2 s = 60 m

Answer:

0.98 g/m

Explanation:

Note: Since Tension and frequency are constant,

Applying,

F₁²M₁ = F₂²M₂............... Equation 1

Where F₁ = Frequency of the G string, F₂ = Frequency of the A string, M₁ = mass density of the G string, M₂ = mass density of the A string.

make M₂ the subject of the equation

M₂ = F₁²M₁/F₂²............... Equation 2

From the question,

Given: F₁ = 196 Hz, M₁ = 0.31 g/m, F₂ = 110 Hz

Substitute these values into equation 2

M₂ = 196²(0.31)/110²

M₂ = 0.98 g/m

Answer:

The answer would be 7.5 Hz.

Answer:

1. A. Safety measures in handling machines

2. C. One lane, follow the traffic signal

3. D. Internal and external forces contribute to the formation of various surface features of the earth.

4. D. Tsunami

Explanation:

1. Safety measures are precautions that must be taken to avoid injuries when handling some potentially dangerous equipment. They are meant to protect us from harm.

2. If a part of the road is to be sealed up temporarily, road users should be alerted that there is just one lane ahead. Therefore, they should follow the traffic signal.

3. The pressure exerted on the earth through phenomena like plate tectonics, earthquakes, etc., causes the eruption and formation of different features on the earth.

4. A tsunami is a giant ocean wave caused by earthquakes and volcanic eruptions that occur under the sea. They occur with a lot of speed and cause an overflow of water onto land.

Explanation:

Hi Linda,

How's it going?

Sorry I haven't been in touch for such a long time but I've had exams so I've been studying every free minute. Anyway, I'd love to hear all your news and I'm hoping we can get together soon to catch up. We just moved to a bigger flat so maybe you can come and visit one weekend?

How's the new job?

Looking forward to hearing from you!

Helga

Answer:

35.047 m

Explanation:

The time it takes the lead ball to reach the surface of the water is

s = ut+gt²/2............. Equation 1

Where t = time it takes the lead ball to reach the surface of water, u = initial velocity of the lead ball, g = acceleration due to gravity, s = heigth.

From the question,

Given: s = 5.20 m, u = 0 m/s (dropped from a height)

Constant: g = 9.8 m/s²

5.2 = 0+9.8t²/2

t² = (5.2×2)/9.8

t² = 10.4/9.8

t² = 1.06

t = √(1.06)

t = 1.03 s

Hence, time taken for the lead ball to reach the bottom of the lake is

t' = 4.5-1.03

t' = 3.47 seconds

v² = u²+2gs............... Equation 2

Where v = final velocity of the lead ball

Substitute into equation 2

v² = 0+2(9.8)(5.2)

v² = 101.92

v = √(101.92)

v = 10.1 m/s

Therefore, depth of the lake is

D = vt'

D = 10.1(3.47)

D = 35.047 m

Answer:

K = 2 10⁻⁸ J

Explanation:

Let's solve this exercise in parts, we start by finding the charge on each plate of the capacitor

          C = Q / ΔV

           C = ε₀ A / d

          ε₀ A / d = Q / ΔV

          Q = ε₀ A ΔV / d        (1)

indicate the potential difference ΔV₁ = 12 V, the distance between the plates d₁ = 3 mm = 0.003 m,  

as the power supply is disconnected and the capacitor is ideal the charge remains constant

in the second part we separate the plates at d₂ = 5 mm = 0.005 m, using equation 1

          ΔV₂ = [tex]\frac{Q d_2}{ \epsilon_o A}[/tex]

we substitute the equation for Q

         ΔV₂ = [tex]\frac{d_2}{\epsilon_o A} \ \frac{\epsilon_o A \Delta V }{d_1}[/tex]

         ΔV₂ = [tex]\frac{d_2}{d_1} \ \Delta V_1[/tex]

in the third part we use the concepts of energy

starting point. Test charge near positive plate

          Em₀ = U = q ΔV₂

final point. Test charge near negative plate

          Em_f = K

energy is conserved

          Em₀ = Em_f

          q ΔV₂ = K

          K = q ΔV₁ [tex]\frac{d_2}{d_1}[/tex]

we calculate

          K = 1 10⁻⁹  12  0.005/0.003

          K = 2 10⁻⁸ J

The question is incomplete. The complete question is :

A wire 0.6 m long and with mass m = 11 g is positioned horizontally near the earth's surface and perpendicular to a horizontal magnetic field of magnitude B = 0.4 T. What current I must flow through the wire in order that the wire accelerate neither upwards nor downwards? The magnetic field is directed into the page.

Solution :

Given :

Length of the wire, L = 0.6 m

Mass of the wire length, m = 11 g

                                             = [tex]11 \times 10^{-3}[/tex] kg

Magnetic field , B = 0.4 T

Know we know that :

ILB = mg

or [tex]$I=\frac{mg}{BL}$[/tex]

 [tex]$I= \frac{(11 \times 10^{-3})(9.81)}{(0.4)(0.6)}$[/tex]

 [tex]I=0.44963\ A[/tex]

 [tex]I = 449.63 \ mA[/tex]

Answer:

Explanation:

Equilibrium is a state in which the algebraic sum of all forces acting on an object is zero. Thus the object has no force acting on it. The types are: stable, unstable and neutral equilibrium. While a torque is a turning force which are equal but acts in an opposite direction. When applied to on object, it constitute a turning effect. Example is the force applied on a tap, handle wheel of a car etc.

In the given question, the condition stated shows that the stick would experience a torque, thus not in equilibrium. Since the forces at its ends are in opposite directions, then it continues to rotate about its axis.

Answer:

The principle of a potentiometer is that the potential dropped across a segment of a wire of uniform cross-section carrying a constant current is directly proportional to its length. The potentiometer is a simple device used to measure the electrical potentials (or compare the e.m.f of a cell).

Explanation:

I hope it will help you

a) The rotational kinetic energy of the airplane propeller is 1792152.287 joules.

b) The angular speed of the airplane propeller is approximately 3348.631 revolutions per minute.

Let consider the airplane propeller a rigid body, the rotational kinetic energy of the propeller (K), in joules, is described by the following formula:

K = 0.5 · I · ω²  (1)

Where:

In addition, the moment of inertia of a slender rod rotating around its center is:

I = 0.0833 · M · L²   (2)

Where:

a) If we know that M = 100 kg, L = 2.16 m and ω = 303.687 rad/s, then the rotational kinetic energy of the propeller is:

K = 0.5 · [0.0833 · (100 kg) · (2.16 m)²] · (303.687 rad/s)²

K = 1792152.287 J

The rotational kinetic energy of the airplane propeller is 1792152.287 joules. [tex]\blacksquare[/tex]

b) By (1) and (2) we know that the mass of the propeller is inversely proportional to the square of the angular speed. Therefore, we have the following relationship:

[tex]M_{o}\cdot \omega_{o}^{2} = M_{f}\cdot \omega_{f}^{2}[/tex]

[tex]\omega_{f} = \sqrt{\frac{M_{o}}{M_{f}} }\cdot \omega_{o}[/tex]   (3)

If we know that [tex]\omega_{o} = 2900\,\frac{rev}{min}[/tex], [tex]M_{o} = 100\,kg[/tex] and [tex]M_{f} = 75\,kg[/tex], then the angular speed of the airplane propeller is:

[tex]\omega_{f} = \left(2900\,\frac{rev}{min} \right)\cdot \sqrt{\frac{100\,kg}{75\,kg} }[/tex]

[tex]\omega_{f} \approx 3348.631\, \frac{rev}{min}[/tex]

The angular speed of the airplane propeller is approximately 3348.631 revolutions per minute. [tex]\blacksquare[/tex]

To learn more on rotational kinetic energy, we kindly invite to check this verified question: https://brainly.com/question/20261989

Answer:

a) The laser device

b) The tape

Explanation:

First, there is a need to understand what accuracy and precision mean.

Accuracy is the closeness of a measurement to its true (pre-determined) value.

Precision is the closeness of repeated measurements to each other.

Since 1 feet = 12 inches, then, 5 feet and 5.2 inches would be equivalent to 65.2 inches. This value represents the true value of my height.

The tape measured the height as 65 3/8, which is equivalent to 65.375 inches.

The laser device measured the height as 65.31.

Error = true value - measured value

Absolute error from the tape = 65.2 - 65.375

                                       = -0.175 inches

Absolute error from laser device = 65.2 - 65.31

                                 = -0.11

a) The magnitude of error from the tape is more than that of the laser device. Hence, the laser device is said to be more accurate.

b) Even though there were just single readings from both instruments, the tape can be read to the nearest 1/8 of an inch and as such, can give more precisive measurements than the laser device.

Answer:

Modern technology is the advancement of old technology with adjustments.

1. Ghana is still developing economically and modern  infrastructure is not yet well established.

2. Ghana has Environmental- health concerns which contribute to the lack of improvement of technology in Ghana.

3.  Youth unemployment is prevalent therefore contributing to lack of improvement of technology in Ghana.

Explanation:

Ghana is a developing country with rising debt payments which could very well contribute as whole to the lack of improvement of technology in Ghana.

Explanation:

some thing inside a resistor