What's the equation with gravity that involves acceleration and time?

Answers

Answer 1

Answer:

g = G*M/R^2, where g is the acceleration due to gravity, G is the universal gravitational constant, M is mass, and R is distance.

Explanation:

These two laws lead to the most useful form of the formula for calculating acceleration due to gravity


Related Questions

A target lies flat on the ground 4 m from the side of a building that is 10 m tall, as shown below.
The acceleration of gravity is 10 m/s^2.
Air resistance is negligible.
A student rolls a 4 kg ball off the horizontal
the roof of the building in the direction of the
target.
The horizontal speed v with which the ball
must leave the roof if it is to strike the target
is most nearly

1. v =√3 /4 m/s.
2. v =4√3 /3 m/s.
3. v = 4 m/s.
4. v = 2√2 m/s.
5. v =√2 / 4 m/s.
6. v =√5 / 4 m/s.
7. v = 4√3 m/s.
8. v = 4√5 m/s.
9. v = 6 m/s.
10. v = 4√2 m/s.

Answers

Answer:

v = 2√2 m/s

Explanation:

The following data were obtained from the question:

Height (h) = 10 m

Acceleration due to gravity (g) = 10 m/s²

Horizontal distance (s) = 4 m

Horizontal velocity (v) =.?

Next, we shall determine the time taken for the ball to get to the target.

This can be obtained as shown below:

Height (h) = 10 m

Acceleration due to gravity (g) = 10 m/s²

Time (t) =?

h = ½gt²

10 = ½ × 10 × t²

10 = 5 × t²

Divide both side by 5

t² = 10/5

t² = 2

Take the square root of both side.

t = √2 s

Finally, we shall determine the horizontal velocity as shown below:

Horizontal distance (s) = 4 m

Time (t) = √2 s

Horizontal velocity (v) =.?

s = vt

4 = v × √2

Divide both side by √2

v = 4 /√2

Rationalise the denominator

v = (4 /√2) × √2/√2

v = 4 × √2 / √2 × √2

v = 4 × √2 / 2

v = 2√2 m/s

A net force F accelerates a mass 'm' with an acceleration 'a'. what acceleration results if force 13F acts on mass 15m in terms of 'a'

Answers

Answer:

13a/15

Explanation:

According to newton's second law

F = ma

F is the force

m is the mass

a is the acceleration

From the formula:

a = F/m

Given

F = 13F

m = 15m

Substitute the given parameters into the formula:

a' = 13F/15m

a' = 13/15 * F/m

a' = 13/15 * a

a' = 13a/15

Hence the new acceleration a' that results in terms of a is 13a/15

In a two-slit experiment, the slit separation is 3.00 × 10-5 m. The interference pattern is created on a screen that is 2.00 m away from the slits. If the 7th bright fringe on the screen is a linear distance of 10.0 cm away from the central fringe, what is the wavelength of the light? In a two-slit experiment, the slit separation is 3.00 × 10-5 m. The interference pattern is created on a screen that is 2.00 m away from the slits. If the 7th bright fringe on the screen is a linear distance of 10.0 cm away from the central fringe, what is the wavelength of the light? 214 nm 204 nm 224 nm 100 nm 234 nm

Answers

Answer:

The value is  [tex]\lambda  = 214.3  \ nm [/tex]

Explanation:

From the question we are told that

   The  slit separation is  [tex]d =  3.00 * 10^{-5} m[/tex]

    The  distance of the screen is  [tex]D =   2.00\ m[/tex]

    The  order of fringe is  n  =  7

    The path difference is  [tex]y =  10.0 \ cm  =  0.1 \  m[/tex]

    Generally the path difference is mathematically represented as

      [tex]y =  \frac{n *  \lambda  *  D}{ d}[/tex]

=>   [tex]0.1 =  \frac{7 *  \lambda  * 2.00 }{ 3.00 * 10^{-5}}[/tex]

=>  [tex]\lambda  =  \frac{0.1 *3.00 * 10^{-5} }{7 * 2.00 }[/tex]

=>   [tex]\lambda  =  \frac{0.1 *3.00 * 10^{-5} }{7 * 2.00 }[/tex]

=>   [tex]\lambda  = 2.143 *10^{-7} \  m [/tex]    

=>    [tex]\lambda  = 214.3  \ nm [/tex]

What volume is represented by each small tick mark ? Help !!!

Answers

Answer:

In the taller, skinnier cylinder, each tick mark represents 2, while in the larger one, each tick mark represents 50.

Explanation:

If you count the tick marks between each big number, then you can divide, and figure out what amount each tick mark represents.

why did you test the resistance of the wire

Answers

Answer:

What????

Explanation:

is there more to the problem???

I WILL MARK YOU AS BRAINLIEST IF RIGHT
In order to climb up a mountainside, a train needs to start at a speed of 40 mph. The speed limit on the track, however, is 25 mph. How much time does the train need to get up to 40 mph if it can accelerate 4 mph per minute ?

Answers

Does it take the train 10 minutes to accelerate at 40mph because 4*10=40
I think the answer is 10

Nervous tissue makes up most of the


Brain


Lungs


Kidneys


Stomach

Answers

Answer:

, Nervous tissue is composed of two types of cells, neurons and glial cells. Neurons are the primary type of cell that most anyone associates with the nervous system. They are responsible for the computation and communication that the nervous system provides.

North America and South America are on the same Tectonic Plate.

True
False

Answers

Answer:True

Explanation:

Question # 40
A body falls freely under gravity. If speeds is v when it has lost an amount x of the gravitational P.E, then its mass is:

2x / v2
2x / v3
2x / v4
none
please give me its solution

Answers

Answer:

Potential Energy = x = m g h

Kinetic energy = 1/2 m v^2

Assuming the mass fall from rest

1/2 m v^2 = m g h

v^2 = 2 g h

So the speed attained is independent of the mass

Also, x / v   does not have the units of mass

So the solution is none of the above.

A sports car of mass 1.00x103 kg can accelerate from rest to 30.0 m/s in 7.00 s. What is the average forward force on the car?

Answers

Answer:

Explanation:

Before you can find the force, you need to find the acceleration.

Givens

vi = 0

vf = 30 m/s

t = 7 seconds

Formula

a = (vf - vi) / t

Solution

a = (30 - 0)/7

a = 4.28 m/s

Now you can look at the Force

F = m * a

F = 1.00*10^3 * 4.28

F = 4.28 * 10^3 N

PLEASE HELP ASAP
A 744N object falling in the air experiences 434N of air resistance. what is the amount if net force of the falling objec

Answers

Answer:

The amount of net force of the falling object is -310 N, or 310 N downwards

Explanation:

Net Force

Being the force a vector, the net force is the sum of all the force vectors acting on an object at a given time:

[tex]\vec F_n=\vec F_1+\vec F_2+\vec F_3+.....\vec F_m[/tex]

When the forces are acting in one axis, say the y-axis, the direction of the forces can be considered by the sign of the magnitude of the force.

For example, the weight of the object is usually assigned a negative direction. In our problem:

W=-744 N

The air resistance always opposes the direction of motion. Since the object is falling, the air resistance is positive:

Fa = +434 N

The net force is the sum of both, including their signs:

Fn = -744 N + 434 N = -310 N

The amount of net force of the falling object is -310 N, or 310 N downwards

If an object starts out at rest and accelerates to 100 m/s what is its initial speed?

Answers

Answer:0m/s

Explanation.

The initial velocity is 0 because when the object starts moving its speed is zero

True or false- Normally, all objects are electrically positively charged

Answers

False. Objects usually have either a positive, neutral, or negative charge. So not all objects has a positive charge

-5 1/3 - 2 1/3 in math

Answers

-7 2/3 or -23 / 3

Hope this helped :)

Answer:

3

Explanation:

5 1/3 - 2 1/3  = 3

Broken down: 1/3 - 1/3 = 0      5 - 2 = 2

Because mass is determined from protons
and neutrons, what conclusion can you
make?

Answers

Answer:

Electrons have virtually no mass

Explanation:

I had a test an this was the right answer^

Answer: Electrons have virtually no mass

Explanation: on edpuzzle that was the answer

You drive 200 miles in 3 hours before stopping
for 30 minutes for lunch and gas. After lunch,
you travel 150 miles in an hour and a half. What
was your average speed for the trip?

Answers

Answer 55.5mph

explanation

Which object has the greatest
inertia?
F- a falling leaf
G- a softball in flight
H-a seated high school student
J-a rising helium-filled toy balloon

Answers

Answer:

H-a seated high school student

Explanation:

"Inertia" is an important word in Physics. It is the resistance of an object to any change in motion. Measuring the amount of inertia largely relies on the "mass of an object." The heavier the object, the more likely it is able to resist any change in motion.

Among the choices above, the high school student is the heaviest and has greater mass than the leaf, softball or balloon. This means, it has the greatest inertia.

Thus, this explains the answer.

BLANK charges repel each other.

Answers

Answer:

like

Explanation:

Have a good day!!

Answer: negitive

Explanation:

Which action could a student take to show a transverse wave
A:blow up a balloon
B:shake a rope from side to side
C:shout across a soccer field
D:Knock on a door

Answers

Im going with B for transverse wave

Answer:

B is the correct answer

Explanation:

I just did this question

I WILL MARK YOU AS BRAINLIEST IF RIGHT
A 1125 kg car was traveling at 20 m/s toward a traffic signal when the light suddenly turned red. The driver stomped on her accelerator, clearing the intersection in 1.7 seconds and coming to a speed of 24.6 m/s . What was the acceleration of the car?

Answers

Answer:

a = 3.88 m/s^2  (3.88 meters per second squared)

Explanation:

The acceleration of the car can be obtained based of the change of velocities  (from initial velocity "vi" to final velocity "vf") in the given amount of time:

In our case:

a = (26.6 - 20) / 1.7 = 3.88 m/s^2

A graph of kinetic energy vs the mass of an object is ______________?

Answers

Answer:

The shape of the MASS vs ENERGY graph has a NON-LINEAR RELATIONSHIP.

Explanation:

Your Welcome Friend!   :)

A graph of kinetic energy vs the mass of an object is non-linear.

What is the nonlinear relationship?

Changes in the output are not proportional to changes in any of the inputs in a nonlinear connection.

When a linear connection is plotted on a graph, it produces a straight line; however, when a nonlinear relationship is plotted on a graph, it produces a curve.

When graphed, motion energy is proportional to the mass of the moving item, resulting in a linear connection, and it expands with the square of its speed, resulting in a non-linear relationship.

Hence a graph of kinetic energy vs the mass of an object is non-linear.

To learn more about the nonlinear relationship refer to the link;

https://brainly.com/question/14304469

A disc with moment of inertia 1.5 kg m2 is rotating with an angular speed of 800 rev/min on a shaft. A second disc, initially at rest and with moment of inertia 5.0 kg m2,is suddenly clamped together to the same shaft.
(a) Determine magnitude of angular momentum of the first disc.
(b) Determine the common angular speed of the combination of the two discs.

Answers

Answer:

Explanation:

Angular momentum p = Iw

I is the moment of inertia

w is the angular velocity

a) Angular momentum of the first disc

p1 = I1w1

Given

I1 = 1.5kg/m²

w1 = 800rev/min

Convert to rad/s

1 rev = 6.283rad

1 min = 60secs

800rev/min = 800(6.283)/60

= 83.77rad/s

p1 = 1.5×83.77

p1 = 125.66kgrad/s

Hence the magnitude of angular momentum of the first disc is 125.66kgrad/s

b) according to law of conservation of momentum

I1w1+I2w2 = (I1+I2)w

w is the common angular speed

Given

11w1 = 125.66

w2 = 0rad/s

I1 = 1.5kgm²

I2 = 5kgm²

Substitute

125.66+0 = (1.5+5)w

125.66 = 6.6w

w = 125.66/6.5

w = 19.33rad/s

Since 1rad/s = 9.549tev/min

19.33rad/s = 184.6rev/min

Hence the common angular speed of the combination of the two discs is 184.6rev/min

give reasons with examples why houses are made up of bricks and cement instead of metal

Answers

Answer:

The most important is that the thermal conductivity of the armadillas several orders of magnitude lower than the thermal conductivity of the metal, therefore it is easier to maintain the temperature in winter

Explanation:

Cement and bricks are used in the construction of houses instead of metal, for several reasons

* The most important is that the thermal conductivity of the armadillas several orders of magnitude lower than the thermal conductivity of the metal, therefore it is easier to maintain the temperature in winter

* Metal has more oxidation problems than brick

* The cost of sheet metal is higher than the cost of cement brick.


A automotive test driver travels due north in a prototype hybrid vehicle at 30 mi/h
for 2 hours. She then reverses her direction and travels due south at 60 mi/h for 1 hour.

What is the average speed of the vehicle?
a) 40 mi/h
b) 50 mi/h
c) zero mi/h
d) 60 mi/h
e) 30 mi/h

Answers

Answer:

Option A. 40 mi/h

Explanation:

To obtain the average speed of the vehicle, we'll begin by calculating the distance travelled by the vehicle in each case. This is illustrated below:

Case 1:

Speed = 30 mi/h

Time = 2 h

Distance =...?

Speed = Distance /Time

30 = Distance /2

Cross multiply

Distance = 30 × 2

Distance = 60 mi

Case 2:

Speed = 60 mi/h

Time = 1 h

Distance =...?

Speed = Distance /Time

60 = Distance /1

Cross multiply

Distance = 60 × 1

Distance = 60 mi

Finally, we shall determine the average speed of the vehicle as follow:

Total distance travelled = 60 + 60

Total distance travelled = 120 mi

Total time = 2 + 1

Total time = 3 h

Average speed =..?

Average speed = Total Distance travelled /Total time

Average speed = 120/3

Average speed = 40 mi/h

Therefore, the average speed of the vehicle is 40 mi/h

If a car travels 600m west in 25 seconds, what is its velocity?

Answers

Answer:

The answer is 24 m/s

Explanation:

The velocity of the car can be found by using the formula

[tex]v = \frac{d}{t} \\ [/tex]

d is the distance

t is the time taken

From the question we have

[tex]v = \frac{600}{25} \\ [/tex]

We have the final answer as

24 m/s

Hope this helps you

A
A penny is dropped from the top of a 200 m building and is in free fall. How long will it take
the penny to hit the ground?

Answers

Answer:

The penny will hit the ground at 6.39 seconds

Explanation:

Free Fall

The penny is dropped from a height of y=200 m. The equation of the height on a free-fall motion is given by:

[tex]\displaystyle y=\frac{gt^2}{2}[/tex]

Where [tex]g=9.8\ m/s^2[/tex], and t is the time.

Solving for t:

[tex]\displaystyle t=\sqrt{\frac{2y}{g}}[/tex]

Using the value y=200:

[tex]\displaystyle t=\sqrt{\frac{2*200}{9.8}}[/tex]

t=6.39 sec

The penny will hit the ground at 6.39 seconds

Before Collision Consider a system to be one train car moving toward another train car at rest When the train cars collide, the two cars stick together What is the total momentum of the system after the collision? O 800 kg . m/s m, = 600 kg V,= 4 m/s m = 400 kg v2 = 0 m/s 1,600 kg. m/s 0 2,400 kg • m/s 0 4,000 kg . m/s After Collision ​

Answers

Answer:

2,400kg * m/s

Explanation:

You are missing some information in the question but the rest could be found some where else.

The question gives the masses and starting velocity of each car.

Car 1: m = 600kg and sv = 4m/s

Car 2: m 400kg and sv = 0m/s

Find the momentum of both cars.

Car 1: 600 * 4 = 2400

Car 2: 400 * 0 = 0

Add both.

2400 + 0 = 2400

Best of Luck!

Answer: answer C

Explanation:

Your welcome

A 10-cm-thick aluminum plate (α = 97.1 × 10−6 m2/s) is being heated in liquid with temperature of 550°C. The aluminum plate has a uniform initial temperature of 25°C. If the surface temperature of the aluminum plate is approximately the liquid temperature, determine the temperature at the center plane of the aluminum plate after 15 s of heating. Solve this problem using the analytical one-term approximation method. The temperature at the center plane after 15 s of heating is

Answers

Answer:

356°C.

Explanation:

(1). The first step to the solution to this particular Question/problem is to determine the Biot number, and after that to check the equivalent value of the Biot number with plate constants.

That is, Biot number = (length × ∞)÷ thermal conductivity. Which gives us the answer as ∞. Therefore, the equivalent value of the ∞ on the plates constant = 1.2732 for A and 1.5708 for λ.

(2). The next thing to do is to determine the fourier number.

fourier number = [α = 97.1 × 10−6 m2/s × 15 s] ÷ (.05m)^2 = 0.5826.

(3). The next thing is to determine the temperature at the center plane after 15 s of heating.

The temperature at the center plane after 15 s of heating = 500°C [ 25°C - 500°C ] [1.2732] × e^(-1.5708)^2 ( 0.5826).

The temperature at the center plane after 15 s of heating = 356°C.

An Object is thrown straight up into the air with an initial velocity of 15m/s. What is its velocity at the peak of its flight?

Answers

Answer:

0

Explanation:

The initial velocity of an object is 15 m/s when it was thrown straight up into the air.

At maximum height, the velocity of the object is equal to 0. It starts coming  downward after that and falls ground. Height attained by the object is given by :

[tex]h=\dfrac{v^2}{2g}[/tex]

Hence,  its velocity at the peak of its flight is equal to 0.

A car travels 90 km/h. How long does it take for the car to travel
400 km?
b. 1.5x103 s
C. 1.5x104 s
a. 4x104 s.
d. 1.6x104s

Answers

Answer:

4.44 hr

Explanation:

distance= rate*time

400km/(90 km/hr)=time

time=4.44 hr

Other Questions
How do I solve this? For what reason did a group of colonists agree to this compact?A. To declare independence from all European nationsB. To form a social contract among themselvesC. To demonstrate goodwill toward local American IndiansD. To establish trade relations with other colonies What is the maximum number of circles of radius 1 you can fit, without overlapping them,in a circle of radius 3? Suppose 7 quesadillas is 49 dollars and 2 mexican burritos are 10 dollars. Find the price of 1 quesadilla and 10 mexican burritos. Explain how you set up this algebraic expression. 3. You go to a restaurant and spend $82. You find out the bill is 15% off, how much do you pay? How are u supposed to tell how many neutrons and electrons an element has?? Pls help if u know the answer. Bond Industries uses departmental overhead rates to allocate its manufacturing overhead to jobs. The company has two departments: Assembly and Sanding. The Assembly Department uses a departmental overhead rate of $20 per machine hour, while the Sanding Department uses a departmental overhead rate of $15 per direct labor hour. Job 542 used the following direct labor hours and machine hours in the two departments: Actual results Assembly Department Sanding Department Direct labor hours used 4 3 Machine hours used 9 5 The cost for direct labor is $25 per direct labor hour and the cost of the direct materials used by Job 542 is $1,200. What was the total cost of Job 542 if Bond Industries used the departmental overhead rates to allocate manufacturing overhead how political parties pick their presidential nominees what's the process.NO COPY AND PASTING Assume that an object has been placed in the pan of a triple beam balance. Thescales of the balance are shown below. What is the mass of the object? It costs $5 for an adult and $2 for a student to visit the National Botanical Gardens. Adults can be members of the Botanical society and can visit for free. A group of 30 adults and students visited the gardens. Five were members and it cost the group $104. How many students working for the internal Revenue Service is a career in public safety: A. True B. False Where does the oxygen needed for aerobic respiration come from? 100 points!!!! Write for each word a :Connotation: what you think the word meansSynonym: a word that has the same meaning of the wordAntonym: opposite in meaningnmEtymology: origin of the wordSentence: create an original sentence using the wordVocabulary words;;Comatoseinveiglepallidpoignantlyruminationssetteeapatheticexpertiseharryimpelledperusalquizzicallyvouchsafebailiwick What is a major characteristic of federalism?O A. State governments have all the same powers as the nationalgovernment.B. All state governments are set up based on different constitutions.C. A national government has complete control over every one of thestates.D. Some powers are given to states, and others are given to anational government. Describe Satisfaction by The Rolling Stones CAN SOMEONE HELP ME WITH MY QUESTION PLS? Which of the following accurately describes a piece of work that is in the public domain? A. It can be copied, distributed, and displayed as long as the author is credited. B. It can be used for any noncommercial use without attribution or cost. C. It has been made available for any use in any piece of work that is also put in the public domain. D. It has been made available to the general public for any use at no charge. Presentation software is the best file type for writing a research paper. True False Ammonium nitrate (NH4NO3) is a common component of fertilizer because it is a great source of two nitrogen-containing ions that easily dissolve into water. A large batch of this liquid fertilizer is made by adding 2.13 pounds of ammonium nitrate to 26.00 gallons of water. What is the molarity of this solution? (Hint: 1 lb. = 454 g and 1 gal. = 3.79 L.) can someone help me to solve this question?