The team needs to choose a primary view for the part drawing. Three team members make suggestions:

- Team member 1 suggests an orthographic top view because that is how the plans for the part were submitted.
- Team member 2 suggests an isometric view showing side details that were documented within the submitted plans.
- Team member 3 suggests all three orthogonal views should be presented as the primary view.

What is the best way to proceed?

Answer choices below:

Answer:

Explanation:

A continuous fiber-reinforced composite is to be produced by dispersing 60 vol% carbon fibers in a polycarbonate matrix. if the stress in the polycarbonate matrix when the carbon fibers fail is 45 mpa, the longitudinal elastic modulus of the composite using rule of mixture

Answer:

[tex] \therefore [/tex] The power output of the draw-works motor is 4.36 hp

Explanation:

Given that,

As the problem given, the cable is tied of the top on the oil rig and it wraps around the lower pulley and the top pulley. So, we will be using the formula below:

Differentiate it but with respect to the time. Therefore,

Thus,

Thus, the power output should be

[tex] P = Fv = \bigg(\frac{600}{2}\bigg) \cdot 8 = 2400 \ lb \cdot ft/s = \frac{2400}{550} = 4.36 \ hp [/tex]

[tex] \therefore [/tex] The power output of the draw-works motor is 4.36 hp

Answer:

Thermal energy is measured using a thermometer denominated in Fahrenheit, Celsius and Kelvin

The watercraft in the crossing are given with the responsibility to the starboard side to give the way and avoid collision.

The crossing rules are given as the safety rules that are mediated in order to avoid the collision accidents when the two vehicles are crossing the path.

In the sea, the rules are given with the watercraft at the starboard side or the giveaway side to make the way to the other watercraft and avoid collision.

Learn more about crossing rules, here:

https://brainly.com/question/4773184

#SPJ1

The procedures that the technician should describe are:

This is known to be the method that employs the use of nuclear reactions to create or produce electricity.

Note that in the above scenario, The procedures that the technician should describe are:

This is because the coolant will help to reduce the heat level in the reactor and

the fuel rods is needed to power the reactor.

See full question below

In a safety seminar at a nuclear power plant, a technician describes the procedure used if temperatures in the reactor become too high. What procedures should the technician describe?Select all that apply.- May be more than one answer

a. More coolant will be pumped into the reactor.

b. The control rods will be taken out of the reactor

c.The fuels rods will be lowered into the reactor.

d. The control rods will be lowered into the reactor.

Learn more about  nuclear power from

https://brainly.com/question/24295936

#SPJ2

Answer:

Sweat

Explanation:

As you exercise you respire and warm up due to energy. In turn, two things happen, blood vessels vasodilate (irrelevant to you) and sweat glands sweat more. this sweat then evaporates and cools down the body.

Answer:

Hyperpnea is common during exercise

Explanation:

Edge 2023

Explanation:

Energy is what makes change happen and can be transferred form one object to another. Energy can also be transformed from one form to another. Power is the rate at which energy is transferred. It is not energy but is often confused with energy.

Answer:

• Energy is the ability to do work, and it can be transferred from one body (or system) to another, but is always conserved.

• Power is the amount of energy transferred per unit time.

Hope this helps!

The resulting output voltage (rms) when a 50 mV rms input applied is  -187.5 mV.

Root Mean Square Voltage is the amount of AC power which produces the same heating effect as DC Power would have produced.

Vo = -gm x Vi (Rd II Rl )

Vo = -5000 x  10⁻⁶ x 50 x 10⁻³ x (1.5k II 1.5k )

Vo = -25 x 10⁻² x 750 x  10⁻³

Vo = -187.5 mV

Hence, resulting output voltage (rms) when a 50 mV rms input applied is   -187.5 mV.

Learn more about rms voltage.

https://brainly.com/question/13507291

#SPJ1

Answer:

Ea public address glven via the intercom system of a large buildingxplanation:

Answer:

Loose-fill insulation can be installed in either enclosed cavities such as walls, or unenclosed spaces such as attics

Explanation:

Answer in one of my classes

The flashing arrow panels are not used just at night but are used even during the day time. These are necessary to give the directional information to the drivers. Thus, the given statement is false.

The safety instructions are necessary for the drivers as absence of these would lead to increased number of accidents which could lead to death of a number of people. The flashing arrow panels is one of these instructions.

Flashing arrow panels are used during the day as well as at the night to give advance warning and directional information to the drivers where it is required to move to the right or to the left into another lane.

Some of the safety systems used at level crossings include amber and red warning lights on majority of roads, people should stop when the amber lights come on, unless vehicle has already crossed the stop line.

Learn more about Driving here:

https://brainly.com/question/2619161

#SPJ5

or...................

Answer:

i believe it is true

Explanation:

Answer:

C

Explanation:

The action that inspire Ms. Shotwell is that Her mom took her to a trip to look at the  Society of Women Engineers event, and she was said to have quickly fall in love with a mechanical engineer who was a speaker in the event.

The LES is mad up to separate the spacecraft from the Falcon 9 rocket and  move the crew away to safety in case any event of any emergency.

SpaceX was said to be successful because:

Note therefore, that  the action that inspire Ms. Shotwell is that Her mom took her to a trip to look at the  Society of Women Engineers event, and she was said to have quickly fall in love with a mechanical engineer who was a speaker in the event.

Learn more about Engineers from

https://brainly.com/question/17169621

#SPJ4

Answer:

trick question - they are both right.

Explanation:

Both valves are closed during compression and power stroke or both strokes would be useless.

Answer:

A pan (baking)

Newspaper

Cloth

(colored) Water

A binder (to elevate one side of the pan)

Explanation:

hope this helps:)

Answer: Money, Jesus, Metal, and an infinity stone gold-titanium alloy.

Explanation: yes

Answer:

brown.

Explanation:

it could be brown.

The surprising realization scientists are making about bacteria and what danino hopes to eventually be able to do using bacteria are the Corallococcus exercitus.

Antonie van Leeuwenhoek used single-lens microscopes, which he made, to make the primary observations of micro organism and protozoa. His full-size studies at the boom of small animals inclusive of fleas, mussels, and eels helped disprove the concept of spontaneous era of life.

Researchers found a brand new species of alga in vital New York and named it Gormaniella terricola, with the genus named after poet Amanda Gorman.

Read more about the bacteria:

https://brainly.com/question/25236237

#SPJ1

Answer:

im pretty sure its answer D

Explanation:

Answer: There is four elements of Scratch. The stage, the sprites, the script and the programming palette.

Explanation:

Answer:

How do I calculate voltage drop?

To calculate voltage drop, E, across a component, you need to know the resistance of the component and the current thru it. Ohm's Law is E=I⋅R , which tells us to then multiply I by R . E is the voltage across the component also known as voltage drop

Explanation:

Answer:

A

Explanation:

Answer:

20.833 ohms

Explanation:

V = IR    re-arrange

V/I = R

250 / 12 = 20.833    ( 20  5/6)

Using the normalized distribution it is possible to calculate the value of Z score and for cases where there is a 99% chance, so Zscore is -3.6 and X= 16.45.

This curve determines the probability of the event associated with it occurring. The Gaussian distribution is the most common, hence it is known as the Normal Distribution. The area under the distribution curve is always equal to 1.0.

The formula for this distribution can be described as:

[tex]Z score = \frac{x-\mu}{\sigma}[/tex]

Where:

In this case,

[tex]Z score =\frac{1-10}{2.5} \\Z score = -3.6[/tex]

P-value from Z-Table will be P(x<1) = 0.00015911

For 99% we have that z will be 2.58, so

[tex]2.58=\frac{x-10}{2.5}\\x = 16.45[/tex]

See more about normally distributed at brainly.com/question/15103234

#SPJ4

Answer:

they probably have more sidewalks and traffic lights.

Explanation:

a lot of people live in urban areas.

Answer:

Explanation:

the driver who obeys traffic laws

The main objective of phasing out an INDUCTION MOTOR is to identify the ends of the stator coils.

An induction motor is a device based on alternate electricity (AC) which is composed of three different stator coils.

An induction motor is a device also known as an asynchronous motor due to its irregular velocity.

In conclusion, the objective of phasing out an INDUCTION MOTOR is to identify the ends of the stator coils.

Learn more on induction motors here:

https://brainly.com/question/15721280

#SPJ1

Answer:

It’s so we can then understand other cultures and other ways that people do things or we can also be prepared for what a country that we have not been to yet is going to relatively be like. This can also help with vacation planning.

Explanation:

it can also help us understand different people from different cultures.

Answer:

Pistons should be inspected and measured.

Explanation: