Answers
Answer:
Aluminium
Explanation:
From the question given above, the following data were obtained:
Diameter (d) = 1.25 cm
Height (h) = 6.48 cm
Volume (V) of cylindrical=.?
Mass (m) of cylindrical object = 21.535 g
Density of the cylindrical object =..?
Next, we shall determine the radius of the cylindrical object. This is illustrated below:
Diameter (d) = 1.25 cm
Radius (r) =?
r = d/2
r = 1.25/2
Radius (r) = 0.625 cm
Next, we shall determine the volume of the cylindrical object. This can be obtained as follow:
Height (h) = 6.48 cm
Radius (r) = 0.625 cm
Pi (π) = 3.14
Volume (V) of cylindrical=.?
V = πr²h
V = 3.14 × 0.625² × 6.48
V = 7.948 cm³
Recall:
1 cm³ = 1 mL
Therefore
7.948 cm³ = 7.948 mL
Thus, the volume of the cylindrical object is 7.948 mL
Finally, we shall determine the metal in which the cylindrical object is made up of by calculating the density of the cylindrical object. This can be obtained as follow:
Mass (m) of cylindrical object = 21.535 g
Volume of the cylindrical object = 7.948 mL
Density of cylindrical object =?
Density = mass /volume
Density = 21.535 / 7.948
Density of cylindrical object = 2.7 g/mL
Comparing the density of the cylindrical object (i.e 2.7 g/mL) with those given in the table in the question, the cylindrical object is made of aluminium since they have the same density.
Related Questions
what is the ion name of Zinc?
Answers
Answer:PubChem CID: 32051
Explanation:Molecular Formula: Zn+2
Synonyms:
zinc ion
zinc(2+)
Zinc cation
Zinc, ion (Zn2+)
Zn2+
More...
Molecular Weight:
65.4 g/mol
Dates:
Modify:
2020-10-20
Create:
2005-06-08
Are strong acids more readily attracted to strong bases than to weak bases?
Answers
What is the independent variable?
Answers
Answer:
An independent variable is defines as the variable that is changed or controlled in a scientific experiment. It represents the cause or reason for an outcome. Independent variables are the variables that the experimenter changes to test their dependent variable.
Explanation:
:)
Heres some defs- a variable (often denoted by x ) whose variation does not depend on that of another. The independent variable is the variable the experimenter changes or controls and is assumed to have a direct effect on the dependent variable. ... The dependent variable is the variable being tested and measured in an experiment, and is 'dependent' on the independent variable.
Calculate the mass of a sample of fruit sugar, fructose,
C6H1206, containing 2.65 X 1020 molecules.
Answers
Answer:
, containing 2.65 X 1020 molecules.
Explanation:
The mass of a sample of fruit sugar (fructose) C₆H₁₂O₆, containing 2.65 ×10²⁰ is equal to 2.88 g.
What is Avogadro's number?Avogadro’s number can be defined as the number of units in one mole of any chemical substance. Generally, these entities can be electrons, molecules, atoms, ions, or protons, depending upon the kind of chemical reaction or reactants and products.
The value of Avogadro’s constant is found approximately 6.022 × 10²³ mol⁻¹.
Given, the number of molecules of fructose = 2.65 ×10²⁰
The molar mass of the fructose = 180.16 g/mol
So 6.022 × 10²³ molecules of fructose have mass = 180.16 g
Then 2.65 × 10²⁰ fructose molecules will have mass = 2875.04 × 10⁻³ g
The mass of the 2.65 × 10²⁰ fructose molecules = 2.88 g
Therefore, the mass of 2.65 × 10²⁰ fructose molecules is equal to 2.88 g.
Learn more about Avogadro's number, here:
brainly.com/question/11907018
#SPJ2
A student trying to determine if a liquid was a mixture or a pure substance made several following observations. Which observation would best support the conclusion that the liquid was a mixture?
Answers
Answer:
Distillation
Explanation:
By using the method of distillation we'll identify if there is other properties of liquid by looking the temperatures,the ordor or the boiling point.
Question 4 of 8
What can cause an object to move?
A. Balanced forces
B. Unbalanced forces
C. Inertia
D. A reference point
SUER
Answers
Answer:
unbalanced forces can cause an object to move.
Answer:
Unbalanced Forces
Explanation:
What is the volume of a substance that has a mass of 20 g and a density
of 4.0 g/ml?
Answers
Answer:
The answer is 5 mLExplanation:
The volume of a substance when given the density and mass can be found by using the formula
[tex]volume = \frac{mass}{density} \\ [/tex]
So we have
[tex]volume = \frac{20}{4} \\ [/tex]
We have the final answer as
5 mLHope this helps you
All matter has thermal energy because atoms are constantly
Answers
All matter has thermal energy because atoms are constantly in motion, due to motion all matter possess a kinetic energy. The total kinetic energy is known as thermal energy.
What is kinetic energy?The kinetic energy of an object is the energy that it possesses due to its motion. It is defined as the work needed to accelerate a body of a given mass from rest to its stated velocity. Having gained this energy during its acceleration, the body maintains this kinetic energy unless its speed changes
Thermal energy and temperature are closely related. Both reflect the kinetic energy of moving particles of matter. However, temperature is the average kinetic energy of particles of matter, whereas thermal energy is the total kinetic energy of particles of matter.
It increases or decreases only when the velocity changes, heavier objects, It can transform into other types of energy. It will occur regardless of the moving object's direction of travel.
Thus, all matters has thermal energy because atoms are constantly in motion.
To find more about Matter, refer the link below:
brainly.com/question/29232090
#SPJ2
What are differences between Jupiter and Saturn’s moons
Answers
Answer: Well one difference is that Jupiter's moons are large and are closer to each other. Also Jupiter has more moons than Saturn.
Explanation:
Answer:
The difference are :
jupiter moon saturn moon
1.jupitor moon has 4 1.saturn moon
moon has 7 moon
How can you use the periodic table to predict reactivity?
Giving Brainliest!!!
Answers
Answer:
hi
Explanation:
how r u today
A fireworks designer is planning a red-, white-, and blue-themed finale for her fireworks display. She is also planning a fountain effect. Describe the chemicals she will need and how each will produce the desired effect.
Answers
Answer:
strontium salts, lithium salts, lithium carbonate, Li2 CO3 = red, whitehot metal, such as magnesium or aluminum, barium oxide, BaO = white, copper compounds + chlorine producer, copper acetoarsenite (Paris Green), Cu3 As2 O3 Cu(C2 H3 O2 )2 = blue. We will need a metal chemical, so that when it is heated it will produce the incandescent to make the fountain effect.
Explanation:
^^
helpppp in a chemical equation, in which direction does the "yields" arrow point, and what factor does it indicate?
It points to the left, toward the reactants.
It points to the left, toward the products.
It points to the right, toward the reactants.
It points to the right, toward the products.
Answers
Answer:
It points right, towards the reactants
Explanation:
In a chemical equation, the arrow indicating the yield is to the right towards the arrow. The reactants are written in the left side and the product are written in the right side.
What is a chemical equation?A chemical equation represents the reaction between two or more elements or compound. The reaction describes the chemical combination between atoms.
A general chemical equation representing a chemical reaction is written below:
A + B ⇒ C.
Here, A and B are reactants and C be the product.
The yield of a reaction is the amount of product obtained. The theoretical yield might differ from the actual yield. Therefore, the arrow of a reaction points to the right towards products.
Find more on chemical equation:
https://brainly.com/question/30087623
#SPJ2
How many grams are 4.78x10*21 atoms of aluminum?
Answers
Please help hurry
Pleas help me
Answers
Answer:wait nvm i was right its zirconium
the answer should be zirconium
Why can't silver have a mass number of 107.87?
Answers
Answer:
Silver does have a mass of 107.87.
Explanation:
a object in a fluid will sink if the
help plz
Answers
Answer:
D.
Explanation:
Because if an object is more dense than water it will sink.
Explain the difference between the reactants and
products of a chemical reaction.
3
Answers
Answer:
:)
Explanation:
The substance(s) to the left of the arrow in a chemical equation are called reactants. A reactant is a substance that is present at the start of a chemical reaction. The substance(s) to the right of the arrow are called products . A product is a substance that is present at the end of a chemical reaction.
Can someone suggest some really good scientific topic for my scientific presentation?
Answers
Which element is most likely to form a negative 2 ion? a Oxygen b Magnesium c Beryllium d Nitrogen
Answers
Magnesium is 2 plus and beryllium 2 plus too and nitrogen is 3 minus.
Answer:
a
Explanation:
Explain the purpose of the Parados and summarize the text. In addition, infer how the Parados reveals tone and evokes mood. Finally, analyze how the text reveals the beliefs of the ancient Greek people.
Answers
Answer:
The purpose of the Parados is to add an explanation of events that happened before the play begins. In the first section the mood is triumphant because of the recent battle win. Then it jumps back to the beginning of the battle and the mood is scared. Before the army lead by the brother of the king could attack they are forced to retreat and the army counterattacks. Unfortunately, the brothers kill each other during the battle. The people of Ancient Greece believed that Zeus and Ares were on their side and used the gods as the excuse for winning a battle. The story ends victorious but sad tone because the two brothers have slain each other.
Explanation: Gets you 100%
A rectangular metal is 25 dm long, 525 mm wide, and 1.5 m high. This metal weighs 250 lb. Calculate its density in g /mL
Answers
Answer:
d = 0.057 g/mL
Explanation:
Given that,
The dimensions of a rectangular metal is 25 dm long, 525 mm wide, and 1.5 m high.
The weight of the metal is 250 lb
We need to find the density of the metal in g/mL.
1 lb = 453.592 g
250 lb = 113398 g
Volume of the block,
V = 25 dm× 525 mm×1.5 m
Since, 1 dm = 0.1 m, 1mm = 0.001 m
V = 2.5 m× 0.525 m× 1.5 m
V = 1.9668 m³
Also, 1 m³ = 1968000 mL
So,
density = mass/volume
density = 113398 g/1968000 mL
= 0.057 g/mL
So, the density of a rectangular metal is 0.057 g/mL.
Write out a balanced, molecular equation, total ionic equation, and net ionic equation for each:
1. Mg(NO3)2(aq) + Na2CO3(aq) -->
2. AgNO3(aq) + KCl(aq) -->
3. Al(s) + HCl(aq) -->
4. HNO3(aq) + Na2CO3aq) -->
Answers
Answer:
1:MgCO3 (s) + 2 NaNO3
2:agcl(s)+kno3(aq)
3:alcl3(aq)+h2(g)
4:NaNO3 + CO2 + H2O
(not sure abt last one)
What are the physical properties of chlorine?
Answers
Answer:
The Physical Properties of Chlorine are as follows:
Color: Greenish-yellow.
Phase: Gas.
Odor: Disagreeable, suffocating smell.
Density: About two and one-half times as dense as air.
Solubility: Is soluble in water. ...
Boiling Point: The boiling point of chlorine is –34.05°C.
Melting Point: The melting point is –101°C.
Explanation:
Please mark me as the brainliest answer and please follow me for more answers
Harry and Ron are arguing over which broom has better acceleration, the Nimbus 2000 or the Firebolt. The boys are going to race the two brooms from the ground to the top of the goals. Then they will switch brooms and replicate their trials.
Test (independent) Variable: _____________________________________________________________
Result (dependent) Variable: _____________________________________________________________
Control Variables: _____________________________________________________________________
Define Replicate: _____________________________________________________________________
Answers
Answer:
Independent variable: BROOM
Dependent variable: ACCELERATION
Control variable: same distance
Find the definition of replicate below
Explanation:
In an experiment, the independent variable is the variable that is changed or manipulated by the experimenter. In this case, the independent variable is the BROOM.
The dependent variable is the variable that is measured in an experiment. It is the variable that responds to the independent variable. The ACCELERATION is the dependent variable in this case.
The control variable is the variable that is kept constant or unchanged throughout the experiment. In this case, the control variable is the SAME DISTANCE traveled for each broom.
A replicate is a repeated experiment with the expectance of a similar or consistent result. In this case, if the brooms are switched, the acceleration of each broom should be the same in the replicate result.
What is The tough and water-resistant layer of the skin where cells are filled with keratin.
Answers
That’s the answer g
Which is the correct name for the compound CoCO 3?
A
Cobalt Carbonoxide
B
Cobalt (II) Carbonate
C
Carbon Oxygen Carbonate
D
Cobalt Carbonate
QUICK PLEASE!!!
Answers
Answer:
Cobalt (II) Carbonate
Explanation:
Answer:B
Explanation:
Define matrer?
a)Electrical conductivity
b)Anything that takes Iness and space
c) Something that doesn't take up space.
Answers
Answer:
if you are asking matter then
Explanation:
Matter is defined as anything that has mass and takes up space (it has volume).
 what is 19.8-17.1
Answers
Answer: it should be 2.8
Explanation:
helppp What function does adding a coefficient in a chemical equation serve?
Coefficients cannot be added or changed without describing different substances.
It tells whether the reactants must be exposed to outside factors to make them react.
It balances the equation, ensuring each side of the reaction has an equal number of atoms.
It describes the physical state of the reactant or product to which it is attached.
Answers
Answer: The answer is option C. (It balances the equation, ensuring each side of the reaction has an equal number of atoms.)
Explanation:
Which of the following is a type of chemical reaction that releases energy from the bonds of a substance to form one or more new substances
Answers
Answer: any options like a or b
Explanation:
