Answer: C.
Explanation: Please mark Brainlest Pleasee
How many atoms are in 2.4 moles of oxygen?
Answer:
maybe 2455.2, good luck
2. How many moles of NO3, will be produced with this amount of oxygen
gas?
The given question is an incomplete question, the complete question is given below.
Use this equation to answer the questions that follow.
[tex]3O_2(g)+N_2(g)\rightarrow 2NO_3(g)[/tex]
5 moles of oxygen gas are present. How many moles of [tex]NO_3[/tex] will be produced with this amount of oxygen gas?
Answer : The moles of [tex]NO_3[/tex] produced will be 3.33 moles.
Explanation : Given,
Moles of oxygen gas = 5 moles
Now we have to calculate the moles of [tex]NO_3[/tex].
The given balanced chemical equation is:
[tex]3O_2(g)+N_2(g)\rightarrow 2NO_3(g)[/tex]
From the balanced chemical equation we conclude that,
As, 3 moles of [tex]O_2[/tex] gas react to produces 2 moles of [tex]NO_3[/tex] gas
So, 5 moles of [tex]O_2[/tex] gas react to produces [tex]\frac{2}{3}\times 5=3.33[/tex] moles of [tex]NO_3[/tex] gas
Therefore, the moles of [tex]NO_3[/tex] produced will be 3.33 moles.
which of the following are properties of mechanical waves?
The atomic number of sodium (Na) is 11. The element phosphorus (P) is the fourth element to the right of sodium in the periodic table.
The atomic number of phosphorus is ____. It has zero charge because it had ____ electrons.
Answer:
atomic number of phosphorous is 15. It has zero charges because it has equal number of protons and electrons
Explanation:
1or the question.
3. What's the requirement of every single
natural process on Earth?
A student needs to run 3.2
km to get to school. If the student can run 5.5
mi/hr , how many hours will it take them to get to school?
Answer:
Hope this helps.
Explanation:
Convert from miles to kilometers (rounded to 2 decimals):
5.5 mi/h * 1.609 = 8.86 km/h
The student arrives at school in:
8.86 km ------------- 1 h
3.2 km ---------------- x
x = 3.2 * 1 / 8.86
x = 0.3611 hours
The spring constant is
5333Nm. What is the
potential energy of this
spring when it
compressed by
3.50cm?
Answer:
3.50 is answer guyExplanation:
ok if yes do follow
which particles(s) is/are counted in the mass number
Answer:
A component's mass number (A) is the amount of the quantity of protons and the quantity of neutrons. The little commitment of mass from electrons is dismissed in ascertaining the mass number.
Explanation:
Classify each of the substances as a mixture, a compound, or an element.
Mixture
Compound
Element
Answer Bank
methane
vinegar
water
steel
milk
helium
aluminum
table sugar
table sugar
Explanation:
An element is a distinct substance that cannot be split - up into simpler substances. Such substances consist of only one kind of atom.
From the list, the elements are:
helium
aluminum
A compound is substance composed of two or more kinds of atoms or elements joined together in a definite grouping. The properties of a compound are distinct and different from those of the individual elements that are combined in its make - up.
methane
water
Table sugar
A mixture is a substance made up of indefinite composition. The constituents reacts differently to changed conditions. They are easily separated into constituents by physical methods.
Vinegar
Steel
Milk
Given that the mass number for carbon is 13, how many protons and how many neutrons does the isotope contain?
Answer:
6 protons
7 neutrons
protons is also the atomic number... and carbon is 6 on the periodic table. then just subtract the atomic number from the mass number.... then you get the number of neutrons
13-6= 7
Explanation:
Is it more difficult to remove a valence electron from a Magnesium (Mg) atom or a Chlorine (Cl) atom
Answer: It is more difficult to remove a valence electron from a Chlorine (Cl) atom
Explanation:
Ionization energy is the energy required to remove the valence electron from an isolated gaseous atom.
Magnesium (Mg) is the 12th element of periodic table and has an atomic number of 12. The electronic configuration is 2, 8, 2. It can easily lose its valence 2 electrons to attain stable configuration.
Chlorine (Cl) is the 17th element of periodic table and has an atomic number of 17. The electronic configuration is 2, 8, 7. It has a tendency to gain electron to attain stable configuration. It cannot lose its valence electron easily as the valence electrons experience more nuclear charge.
Thus it is more difficult to remove a valence electron from a Chlorine (Cl) atom
Chlorine(Cl) is the more difficult to remove a valence electron from which is
because it needs one electron to achieve a stable octet configuration.
Magnesium (Mg) is an element which has an atomic number of 12. The
electronic configuration is 2, 8, 2. This means it has to lose its 2 valence
electrons needed to attain a stable octet configuration.
Chlorine (Cl) is an element which has an atomic number of 17. The electronic
configuration is 2, 8, 7. This means it has to gain one valence electrons
needed to attain a stable octet configuration.
Thus it is more difficult to remove a valence electron from a Chlorine (Cl)
atom than Magnesium atom.
Read more on https://brainly.com/question/20714034
The Sun is the key driving force of weather and climate. Which of the following is true regarding how weather and climate compare? *
Weather refers to conditions nearer to the ground; climate refers to conditions in the atmosphere.
Climate refers to conditions over long periods of time; weather refers to conditions over short periods of time.
Weather refers to conditions in the atmosphere; climate refers to conditions nearer to the ground.
Climate refers to conditions over short periods of time; weather refers to conditions over long periods of time.
Answer:
yes
Explanation:
big brain
when you throw a ball your hand applies ____ to the ball.
1. friction
2. force
3. normal force
4. inertia
5. second law of motion
6. first law of motion
7. acceleration
Answer:
2.force
Explanation:
whats kinetix energy
Explanation:
kinetic energy is the energy an object has while in motion, if I'm walking I have kinetic energy
Answer:
Kinetix energy: of an object is the energy that it possesses due to its motion. ( nvm sorry youre working on chemistry)
Balance this reaction.
___CO + ___H2 → ___CH3OH
nevermind...
options for each blank: blank,2,3,4
Answer:
4 CO + 8 H2 -> 4 CH3OH
Hope that it works
At what temperature can 60g of CaCl2 be dissolved in 100g of water?
Which of the following can be used to indicate which direction heat transfer will flow between two
objects?
A. Cold
B. Heat
C. Temperature
D. Potential energy
Answer:
Its temperature
Explanation:
if the cold air wants to move to the hot air, then that means its trying toequal out t=both the temperatures. meaning that the cold air will get hotter and the hot were ill get colder.
Temperature can be used to indicate which direction heat transfer will flow between two objects. The correct option is C.
What is temperature?Temperature is the measurement entity of the hotness and coldness of any object or body. Its SI unit is kelvin or Celsius. The heat always transfers from the hot body to the cold body.
The heat is always transferred from high temperature to cold temperature. Heat is warmness that is caused by the thermal energy of the body when kinetic energy or potential energy is converted into thermal energy.
In a closed system, the energy is transferred by the means of heat and work. Otherwise, a closed system saves energy. The energy is transferred always within the same boundaries.
Thus, the correct option is C. Temperature.
To learn more about temperature, refer to the link:
https://brainly.com/question/15799226
#SPJ5
If we place 15 moles of NaN3, how many
grams of NaN3 do you have before the
reaction?
Answer:
25.8 g C6H12O6
Explanation:
what enrollment is a girl ridding a bike??
A. nuclear energy
B. thermal energy
A or B
please help me please ❤️❤️
Answer:
It would be thermal energy.
Explanation:
Thermal energy is the energy transfer of heat which is created while doing physical activity.
Ann dissolves four tablespoons of salt in a bowl of water. She notices that the water has become salty. Ann then keeps
the bowl out in the sun for along time. The water in the bowl evaporates, leaving crystals of salt behind in the bowl.
What kinds of change(s) have happened?
1)The salt dissolving is a physical change and the evaporation of water is a chemical change.
2)Both the salt dissolving and the evaporation of water are physical changes.
3)The salt dissolving is a chemical change, and the evaporation of water is a physical change.
4)Both the salt dissolving and the evaporation of water are chemical changes
Answer:
2)Both the salt dissolving and the evaporation of water are physical changes.
Explanation:
The two kinds of changes that has occurred are both physical changes.
Dissolution of a solute such as salt in water and evaporation of water from a solution are physical changes.
A physical change is one in which the physical property of matter is altered. Particularly the state and the form.
In many of these cases, the change is easily reversible.
Since this change is reversible in that we were able to collect the salt back, this is a physical change.
A student titrates an unknown amount of potassium hydrogen phthalate (KHC8H4O4, abbreviated as KHP) with 21.30 mL of a 0.1161 M NaOH solution. KHP (molar mass
Answer:
0.5050g of KHP were titrated
Explanation:
... (molar mass = 204.22 g/mol) has one acidic hydrogen. What mass of KHP was titrated (reacted completely) by the sodium hydroxide solution?
The KHP is a salt used as standard to determine concentrations of bases as NaOH solutions. The reaction that occurs is:
KHP + NaOH → KP⁻Na⁺ + H₂O
Only 1 hydrogen is acidic. Only 1 hydrogen reacts with NaOH
In the reaction you can see that 1 mole of NaOH reacts per mole of KHP
To find mass of KHP we need to determine its moles finding moles of NaOH (The moles of KHP required to reach endpoint = Moles of NaOH added):
Moles NaOH:
21.30mL = 0.02130L * (0.1161mol / L) = 0.002473 moles of NaOH = Moles KPH
With mass of KHP and its molar mass we can solve the mass of KHP:
0.002473 moles of KHP * (204.22g/mol) =
0.5050g of KHP were titrated25 POINTS FOR SCIENCE! PLEASE HELP!! THANK YOU!!!!
1. 9.36 moles S
2. 0.213 moles Al
Further explanationGiven
Reaction
2Al+3S⇒Al₂S₃
Required
moles of S
moles of Al
Solution
The reaction coefficient in a chemical equation shows the mole ratio of the compounds involved in the reaction (reactants or products)
1. 3.12 moles Al₂S₃From equation, mol ratio of Al₂S₃ : S = 1 : 3, so mol S :
= 3/1 x mol Al₂S₃
= 3/1 x 3.12
= 9.36 moles S
2. 0.32 moles SFrom equation, mol ratio of Al : S = 2 : 3, so mol Al :
= 2/3 x mol S
= 2/3 x 0.32
= 0.213 moles Al
Calculate the following:
1. Mass of 4.3x10-3 mol of lead
2. Mass of 3.8x1022 antimony atoms
3. Number of atoms in 15.5 kg of tungsten
Answer:
1) Mass = 890.96 g
2) Mass = 7.67 g
3) 507.65 ×10²³ atoms
Explanation:
1) Given data:
Number of moles of lead = 4.3×10⁻³ mol
Mass of lead = ?
Solution:
Mass = number of moles × molar mass
Molar mass of lead = 207.2 g/mol
by putting values,
Mass = 4.3×10⁻³ mol × 207.2 g/mol
Mass = 890.96 g
2) Given data:
Number of atoms of antimony = 3.8×10²² atoms
Mass of antimony = ?
Solution:
1 mole contain 6.022 ×10²³ atoms
3.8×10²² atoms × 1 mol / 6.022 ×10²³ atoms
0.63×10⁻¹ mol
0.063 mol
Mass:
Mass = number of moles × molar mass
Molar mass of lead = 121.76 g/mol
Mass = 0.063 mol × 121.76 g/mol
Mass = 7.67 g
3) Given data:
Mass of tungsten = 15.5 Kg (15.5 kg × 1000 g/ 1kg = 15500 g)
Number of atoms = ?
Solution:
Number of moles of tungsten:
Number of moles = mass/molar mass
Number of moles = 15500 g / 183.84 g/mol
Number of moles = 84.3 mol
1 mole contain 6.022 ×10²³ atoms
84.3 mol × 6.022 ×10²³ atoms / 1mol
507.65 ×10²³ atoms
Plzzzzzzzz helpppppppppp
Answer:
true
Explanation:
They explained it in the answer
A flammable material is burning.
EXO
ENDO
Questions
What is the main point of the passage?
Ultraviolet rays can cause chemical reactions.
Van Gogh was the most famous painter of the Impressionist era.
Art conservationists can always restore art.
Artists' paints can eventually damage the canvasses.
201A
Based on the complete text, it is clear to see that the main point of the passage is A. Ultraviolet rays can cause chemical reactions.
What is a Central Idea?This refers to the theme of a text that is used in order to show the message that an author wants to convey in a given text that he wants his readers to understand and grasp.
Hence, we can see that from the complete text which can be found on the official website of BBC news site, the story is told about the ultraviolet rays that were found to cause chemical reactions and discolored some parts of the paintings by Vincent Van Gogh,
This is further explained as the bright yellows in the paintings chemically reacted and thus turned into brown color and this shows that option A is the correct answer that shows the central idea or main point of the text.
Read more about central ideas here:
https://brainly.com/question/2684713
#SPJ1
Im really confused and i need help asap
what is the weight in newton’s of a person with a mass of 80 kg
Answer:784.532 newton
Pls help ASAP........ A student was roasting marshmallows over a fire. The student
noticed that the marshmallows turned brown, and they were
bubbling. Is this a chemical or physical change to matter? How do
you know? List two signs that you know what type of change it is.
Answer:
A chemical change
Explanation:
The marshmallow turning brown and bubbling implies that a chemical change has taken place.
For chemical changes to occur, we observe any of the following:
a new kind of matter is formed. it is always accompanied by energy changesthe process is not easily reversibleit involves a change in massrequires considerable amount of energy.ii. Two signs that shows a chemical change has taken place is that:
bubbles are being formed as it is roasted and it implies that new substances have been formed. also, significant amount of heat energy is supplied for the roasting.Hydrobromic acid dissolves solid iron according to the following reaction:
Fe(s)+2HBr(aq)→FeBr2(aq)+H2(g)
What mass of HBr (in g) would you need to dissolve a 2.8-g pure iron bar on a padlock?
What mass of H2 would be produced by the complete reaction of the iron bar?
Answer:
8.1g
0.1g
Explanation:
The reaction expression is given as:
Fe + 2HBr → FeBr₂ + H₂
Mass of pure iron given = 2.8g
A. Mass of HBr needed to dissolve a padlock of the mass;
To solve this problem, we need to use the mole concept.
Convert mass of the known iron to the number of moles.
Number of moles = [tex]\frac{mass}{molar mass}[/tex]
Molar mass = 56g/mol
Number of moles of iron = [tex]\frac{2.8}{56}[/tex] = 0.05mole
1 mole of Fe will react with 2 mole of HBr
0.05mole of Fe will react with 0.05 x 2 = 0.1mole of HBr
Mass of HBr = number of moles x molar mass
Molar mass of HBr = 1 + 80 = 81g/mol
Mass of HBr = 0.1 x 81 = 8.1g
B. What mass of H2 would be produced by the complete reaction of the iron bar
Since:
1 mole of Fe will produce 2 mole of hydrogen gas
0.05mole of Fe will produce 2 x 0.05mole = 0.1mole of hydrogen gas
Mass of hydrogen gas = number of moles x molar mass
= 0.1 x 1
= 0.1g