please I really need help​

Answer:

Are sorbents good for the environment?

Natural Inorganic Sorbents

Second, sorbents that sink should not be used as they could be harmful to the environment. Sinking is a problem with many sorbents, such as untreated peat moss, most inorganic sorbents, and many wood products.

Its major result is to clean out some surface contaminants, which makes it simpler for oil to absorb. On the other hand, pyrolysis, a high-temperature thermal treatment, causes the sorbent to carbonise. In turn, this greatly improves the oil sorption capacity and oil to water selectivity.

When recovering adsorbent materials that cause secondary contamination, lighter, less viscous oil is lost through the pores more readily than heavier, more viscous oils. Application is simple because sorbents can be applied automatically or manually to spills using blowers or fans.

The best sorbents for recovering oil are typically synthetic ones. In some circumstances, a weight ratio of 40:1 for oil to sorbent can be reached, as opposed to 10:1 for organic compounds and only 2:1 for inorganic materials.

A substance used to absorb or adsorb liquids or gases is known as a sorbent. Examples comprise: a substance that works via adsorption and is comparable to molecular sieve material (attracting molecules to its surface). It has strong thermal conductivity and a big interior surface area.

Thus, On the other hand, pyrolysis, a high-temperature thermal treatment, causes the sorbent to carbonise.

To learn more about sorbents, follow the link;

https://brainly.com/question/10506730

#SPJ2

Answer:

I think C is the answer

Explanation:

because Mitosis results in two identical daughter cells......

Answer:

55 degrees F - cold water

120 degrees F

the last on I don't know

Answer: Arctic Circle, Tropic of Cancer, Equator, Tropic of Capricorn, and the Antarctic Circle.  Hope this helps.

Glyphosphate, lindane, 2,4-d, chlordane are organic compound that have chlorine in common.

Organic compound are group of chemical substance that have carbon and hydrogen atoms in which the bonds are covalently linked together.

Therefore, Glyphosphate, lindane, 2,4-d, chlordane are organic compound that have chlorine in common and these chemicals are use as herbicides that is kill weeds, or to kill insects or pests because of chlorine present in it.

Learn more about organic compounds here.

https://brainly.com/question/14102593

Answer:

B. To make life easier.

Explanation:

Although all of the above makes sense, the answer should be B. because it is to help improve how we live.

I hope it helps! Have a great day!

Muffin~

The goal of technology is to make life easier.

A goal is "an idea of the future or desired result that a person or a group of people envision, plan and commit to achieve".

What is technology?

Technology is "the use of scientific knowledge for practical purposes or applications, whether in industry or in our everyday lives".

Hence, the goal of technology is to make our life better.

To learn more about technology here

https://brainly.com/question/27354061

#SPJ2

[tex]\qquad\qquad\huge\underline{{\sf Answer}}♨[/tex]

If temperature remains constant, then we can apply the formula :

[tex]\qquad \tt \dashrightarrow \:p_1v_1 = p_2v_2[/tex]

[tex]\qquad \tt \dashrightarrow \:4 \times v_1 = 6 \times 18[/tex]

[tex]\qquad \tt \dashrightarrow \: v_1 = 108 \div 4[/tex]

[tex]\qquad \tt \dashrightarrow \:v_1 = 27[/tex]

So, the required volume is 27 litres

Answer:

mass is the amount of matter in an object

Explanation:

Answer:

Two

Explanation:

Nitrate has a charge of negative 1 and the Iron (II) tells us the iron in that formula has a charge of +2, so in order for the iron to have to equal positive two, there has to be two negative. Since on nitrate ion is -1, you need two to make -2.

To prepare 0.250 M solution, the 0.0667 mol of KCl should be diluted up to 266.8mL

From the question,

We are to determine to what volume the KCl should be diluted, in order to prepare 0.250 M solution

From the formula,

Numer of  moles = Concentration × Volume

Then, we can write that

[tex]Volume= \frac{Number\ of\ moles}{Concentration }[/tex]

From the given information,

Number of moles = 0.0667 mole

Concentration = 0.250 M

Then,

[tex]Volume = \frac{0.0667}{0.250}[/tex]

Volume = 0.2668 L

Volume = 266.8 mL

Hence, to prepare 0.250 M solution, the 0.0667 mol of KCl should be diluted up to 266.8mL

Learn more on Stoichiometry here: https://brainly.com/question/16632398

Taking into account the reaction stoichiometry, 1.119 grams of chlorine gas are required to produce 3.32 grams of bismuth chloride is produced.

In first place, the balanced reaction is:

2 Bi + 3 Cl₂ → 2 BiCl₃

By reaction stoichiometry (that is, the relationship between the amount of reagents and products in a chemical reaction), the following amounts of moles of each compound participate in the reaction:

The molar mass of the compounds is:

Then, by reaction stoichiometry, the following mass quantities of each compound participate in the reaction:

Bi: 2 moles ×209 g/mole=418  g

Cl₂: 3 moles ×70.90 g/mole= 212.7 g

BiCl₃: 2 moles ×315.45 g/mole= 630.9 g

The following rule of three can be applied: If by reaction stoichiometry 630.9 grams of BiCl₃ are formed by 212.7 grams of Cl₂, 3.32 grams of BiCl₃ are formed by how much mass of Cl₂?

[tex]mass of Cl_{2} =\frac{3.32 grams of BiCl_{3}x212.7 grams of Cl_{2} }{630.9 grams of BiCl_{3}}[/tex]

mass of Cl₂= 1.119 grams

Finally, 1.119 grams of chlorine gas are required to produce 3.32 grams of bismuth chloride is produced.

Learn more about the reaction stoichiometry:

brainly.com/question/24741074

brainly.com/question/24653699

Answer:

technetium, atomic number 43; promethium, number 61; astatine, number 85; francium, number 87; neptunium, number 93; and plutonium, number 94.

Explanation:

Answer:

b is the correct answer inhibition of cell wall

Hey there!

Sulfanilamide is the classification of the antibiotics that can target the bacteria that’s causing infections.

But the action of the mode of sulfanilamide is: binding of a specific enzyme which simply translates to inhibition of the cell wall

Thus, your answer is: inhibition of cell wall synthesis (Option B.)

Good luck on your assignment & enjoy your day!

~Amphitrite1040:)

We can confirm that for the experiments regarding Boyle's law, the book was used to increase pressure on the gas and add additional weight.

The book is used for the reasons described in options 1 and 2 of the question. The book supports additional weights on the container, meaning that through these added weights we can increase the pressure being applied to the gas and see how said pressure affects the volume of a gas.

Therefore, we can confirm that the book was used to increase pressure on the gas and add additional weight.

To learn more about Boyle's law visit:

https://brainly.com/question/1437490?referrer=searchResults

Answer: A, B

Explanation: edge2023

Answer:

Gas can be compress easily than liquid or solid because, molecules are more spread in gas than solin or liquid.

Brainliest if this helps you. please

Magnesium and Calcium Oxide

Trick : Reactants are always on left

Answer:

magnesium and calcium oxide

Answer:

ion

Explanation:

more protons than electrons

Answer:

D

Explanation:

An ionic solid is a crystalline solid held together by charge attractions or an ionic bond.

Ionic bond or electrovalent bond is a type of bond which is formed between two elements when there is an exchange of electrons which takes place between  the atoms resulting in the formation of ions.

When the atom looses an electron it develops a positive charge and forms an ion called the cation while the other atom gains the electron and develops a negative charge  and forms an ion called the anion.

As the two atoms are oppositely charged they attract each other which results in the formation of a bond called the ionic bond.They are good conductors of heat and electricity. They have high melting points. These compounds are brittle.

Learn more about ionic bond,here:

https://brainly.com/question/11527546

#SPJ2

Answer:

For gene therapy, stem cells can be trained in a lab to become cells that can help fight disease. Liposomes. These fatty particles have the ability to carry the new, therapeutic genes to the target cells and pass the genes into your cells' DNA.

Mark me as brainlest please!

The shared ancestry of life is reflected in DNA and genetic code. DNA comparisons can reveal how closely two species are related. Biogeography. Evolution and geological change are reflected in the global distribution of life and the particular characteristics of island species.

Explanation:

Lithium Sodium Potassium group 1

Hydrogen proton +1

Iron Fe2+

Based on the data given, the molar mass of the gas is 165.5 g/mol while the molecular weight of the gas is 165.5 amu

The molar mass of a gas can be obtained from density, temperature and pressure using the formula below:

Molar gas constant, R = R = 0.082 L.atm/mol/K.

Temperature = 150 °C = 423 K

Pressure = 785 torr = 1.033 atm

density = 4.93 g/L

molar mass of gas = 4.93 × 0.082 × 423/1.033

molar mass of gas = 165.5 g/mol

Then, molecular weight of the gas = 165.5 amu

Therefore, the molar mass of the gas is 165.5 g/mol while the molecular weight of the gas is 165.5 amu

Learn more about molar mass of a gas at: https://brainly.com/question/26215522

Answer:

Keratin :)

Explanation:

Heres a link to learn more about this question: https://brainly.com/question/13022311 :)

Have an amaazing day!!

Please rate and mark brainliest!!

Answer:

A and B is the answer

Answer:

option b

Explanation:

Answer:

Its a chemical conducting electricity

Answer: Silver has the highest temp. change and water has the lowest temp. change.

Explanation:

According to the specific heat capacity, water  has lowest specific heat and greatest is that of silver owing to their temperature differences.

Specific heat capacity is defined as the amount of energy required to raise the temperature of one gram of substance by one degree Celsius. It has units of calories or joules per gram per degree Celsius.

It varies with temperature and is different for each state of matter. Water in the liquid form has the highest specific heat capacity among all common substances .Specific heat capacity of a substance is infinite as it undergoes phase transition ,it is highest for gases and can rise if the gas is allowed to expand.It is different for different substances.

It is given by the formula ,

Q=mcΔT

Learn more about specific heat capacity,here:

https://brainly.com/question/29766819

#SPJ7

Answer:

+4

Explanation:

In PbO2, oxygen exhibits an oxidation number of -2 (since it's not a peroxide or superoxide):

Let the oxidation number of Pb be x. Then, for the compound to be neutral, the oxidation numbers of all atoms should add up to zero.

⇒ x + (−2) + (−2) = 0

x = +4

So the oxidation no. of Pb is +4.

I hope this helps.

Answer:

pretty sure it is

2

1

2

3

1

2

Explanation:

Answer:

[tex]Diffrence \: between \: graphite \: and \: diamond [/tex]

[tex]\qquad \huge{\sf{point \: 1}} ➫[/tex]

⇛Graphite is soft in nature

⇛Diamond is hardest substance

[tex]\qquad \huge{\sf{point \: 2}} ➫[/tex]

⇛Graphite is a good conductor

⇛Diamond is not a conductor

[tex]\qquad \huge{\sf{point \: 3}} ➫[/tex]

⇛Graphite is grey in colour

⇛Diamond have transperant look

[tex]\qquad \huge{\sf{point \: 4}} ➫[/tex]

⇛Graphite have SP² hybridization

⇛Diamond have SP³ hybridization

[tex]\qquad \huge{\sf{point \: 5}} ➫[/tex]

⇛Graphite have layered structure

⇛Diamond have crystalline structure