Answer:
magnesium chlorides are solids with high melting and boiling points because of the large amount of heat which is needed to break the strong ionic attractions.
Explanation:
These magnesium ions have more than one charge (2+). These highly charged ions will attract other ions more strongly than ions with one charge, therefore more energy will be needed to overcome the electrostatic forces of attraction and so the melting points will be higher.
In this experiment you are directed to add a limited amount of NaOH (aq) and then an excess amount. A similar strategy will be used with the addition of NH3(aq). Why? Group of answer choices Both NaOH and NH3 are weak bases. Both NaOH and NH3 are strong bases. Initially a metal hydroxide may form which becomes soluble when more base is added and the metal complex forms. Insoluble metal complexes are first formed which then are replaced by insoluble metal hydroxide precipitates. Initially a complex ion may form which becomes insoluble when more base is added and the metal hydroxide precipitate forms.
The reason for adding a limited amount and then an excess amount is that initially a metal hydroxide may form which becomes soluble when more base is added and the metal complex forms.
In qualitative analysis is a common to add the base in drops and then in excess. When added in drops, the metal hydroxide is formed. This metal hydroxide is often insoluble.
After this metal hydroxide is formed, the base could be added in excess such that the metal hydroxide dissolves in the excess base by forming a complex.
For instance;
CuCl2(aq) + 2NaOH(aq) -------> Cu(OH)2(s) + 2NaCl(aq)
Cu(OH)2(s) + 2OH^-(aq) -------> [Cu(OH)4]^2+(aq)
Learn more: https://brainly.com/question/1527403
Please answer question (e)
Answer:
here is no question (e).............
I'll mark you the brainiest if you answer this question first!!!
Read the CDC's recommendations for frequency of handwashing. Do you agree with these recommendations? Explain your answer using the results from the experiment as evidence.
Link down below:
https://www.cdc.gov/handwashing/when-how-handwashing.html
Answer:
Yes, Because the dishes that are unwashed have the most bacteria while the soap & water dish has the least bacteria.
Explanation:
Hope this help
By referring to particles, explain why the white ring formed in the glass tube
Answer:
Ammonia and Hydrogen Chloride.
Explanation:
Assuming this is what you're referring to, Ammonia (NH3) and Hydrogen Chloride(NCI3). The concentrated ammonia (NH3) is placed on a pad in one end of a tube and hydrochloric acid (NCI3) on a pad at the other. Shortly after the gases will begin diffusing far enough to meet, a ring of solid ammonium chloride (NH4Cl) will be formed.
When two liquids are mixed, they begin to fizz, this is an example of a __1__ change. You know this because __2__.
Answer:
1.chemical change 2, when two chemicals are mixed they have mix two chemcials into one liquid
Explanation:
What differences between snow and sand
Answer:
difference is the temperature at which they melt. Snow melts at 0°C, whereas sand melts at about 1600°C! The temperature at which something melts is its melting point.Phản ứng phân hủy dinitơ pentaoxide N2O5 là một phản ứng bậc 1 có giá trị hằng số tốc độ
K = 5,1.10-4
s
-1
tại 45oC.
2N2O5(k) → 4NO2(k) + O2(k)
a. Biết nồng độ ban đầu của N2O5 là 0,25M, hỏi sau 3,2 phút nồng độ của nó là bao nhiêu?
b. Sau bao lâu nồng độ N2O5 giảm từ 0,25M thành 0,15M?
c. Sau bao lâu chuyển hóa hết 62% N2O5?
Identify the labeled structures. A: B: B C: < A D: ✓ > E: D AVIS Det E с
please I need your help and fast so as soon as you seen this answer please I will list brainlyist
Answer:
ahhh i d kkkkk im so so so so sorry
Explanation:
which of the two glasses the ingredients dissolved completely class/sand or sugar
Answer:
sugar
Explanation:
sand will not dissolve in water because the bond in water isn't strong enough to dissolve it.
so sand is a big no.
so the answer is the other option: which is sugar.
EXPLAIN BRIEFLY WHY CHEMISTRY IS CONSIDERED AS MAJOR BRANCH OF SCIENCE
Answer:
Chemistry is sometimes called “the central science,” because it bridges physics with other natural sciences, such as geology and biology. Chemistry is the study of matter and its properties.
Explanation:
~found it~
Which circle contains the mixture? Is it D?
Calculate AH for the following reaction:
-
-
2NO2(g) → N204(9)
Use appropriate data from the following listing:
NO(g) + NO2(g) + O2(g) → N2O5(9) ΔΗ, = -113.7
NO(g) + NO2(g) → N2O3(g)
9
AH2 = -36.1
N205(9) ► N,05(s)
,
AH = -55.3
N2O3(g) + N2O3(s) -→ 2N204(9)
ΔΗ, = -8.100
2NO(g) + O2(g) → 2NO2(g)
ΔΗς = -112
Answer:
Explanation:
What molecule is this?
Answer:
O2C
Explanation:
Answer:
Carbon Monoxide (CO) is a colorless, odorless, tasteless, toxic gas that has the molecular formula CO. The molecule consists of a carbon atom that is triply bonded to an oxygen atom. ... The linear molecule consists of a carbon atom that is doubly bonded to two oxygen atoms, O=C=O
Explanation:
What is the hydroxide concentration in a 0.20 M potassium acetate solution?
Answer:
Molar concentration of potassium hydroxide
= 0.27 Mol liter/approx
Determine the amount of grams present in
3.25x1024 atoms of Lithium.
Answer:
Explanation:
Molar mass of Lithium is 6.9410 g/mol.
This means 1 mol of Li atoms weigh 6.9410 g
In 1 mol 6.022 x 10 ^ 23 atoms should be present
So, in 6.9410g , there should be 6.022 x 10 ^ 23 atoms.
So weight of 1 atom = a = 6.9410 g / (6.022 x 10^ 23)
To find weight of 3.25 x 10 ^ 24 atoms we have to multiply a by 3.25 x 10^ 24
So you will get the answer as
[6.9410 g / (6.022 x 10^ 23)] x 3.25 x 10^ 24
= 37.46 g
Một chất phóng xạ có chu kỳ bán huỷ là 10 năm, Hỏi bao nhiêu năm thì lượng phóng xạcòn 10%. Cho biết phản ứng phân hủy chất phóng xạ là phản ứng bậc
Answer:
what
Explanation:
please help n let me know thank u
what is the importance of hydrogenation
Answer:
It improves the oxidative stability of the oil.
The hydrogenation process increases the melting point of the fat, which changes liquid oil into solid shortening.
Explanation:
Il See Periodic Table See Hint
A gas composed of chlorine and oxygen has a density of 2.875 g/L at 750.0 mm Hg and 11°C. What is the most likely molecular formula
of the gas?
х
х
He
01
The molecular formula shows the number of atoms present. The molecular formula of the gas is most likely ClO2.
In terms of gas density and molar mass, the ideal gas equation can be written in the form; PM = dRT
Where;
P = pressure of the gas
M = molar mass of the gas
d = density of the gas
R = molar gas constant
T = temperature of the gas
Making the molar mass of the gas the subject of the formula;
M = dRT/P
d = 2.875 g/L
R = 0.082 atmLmol-1K-1
T = 11°C + 273 = 284 K
P = 750.0 mm Hg or 0.99 atm
Substituting values;
M = 2.875 g/L × 0.082 atmLmol-1K-1 × 284 K/ 0.99 atm
M = 67.6 g/mol
The gas is most likely ClO2.
Learn more: https://brainly.com/question/11969651
Please help me with this I’ll give you extra credit it’s due in 10 minutes thank youuu!!! :))
Answer:
Okay ask away. . . You haven't asked anything that we would be able to answer
helppppppppppppppppppppppppp
True
All matter is made up of atoms.
im guessing it probably true
A flask of water is sealed with a balloon and heated to various temperatures on a hot plate
Answer:
What is the question?
Explanation:
You just gave a statement.
Answer:
it will increase
Explanation:
Which of the following molecules is nonpolar?
Ο Α. CO2
Ο Β. SO,
Ο Ο Ο Ο
O C. CO
D. NO
Answer:
CO2
Explanation:
There are two types of moleculesPolarNon polarNon polar molecules are insoluble in water .
Option A
[tex]\sf \longmapsto co_{2}[/tex]
[tex]\sf Co_{2}[/tex] is a non polar molecule.[tex]\sf \longmapsto\sf Co_{2}[/tex]
Lewis Structure =
[tex]\sf \longmapsto\sf \: o \: = c = o[/tex]
[tex]\sf \longmapsto4 + 6(2)[/tex]
[tex]\sf \longmapsto16[/tex]
Non polar molecules are non-soluble in water.Write the full electron configuration for an N2− ion
Answer:
The full electron configuration for an N2− ion is 1s^2 2s^2 2p^5
The electronic configuration of the N²⁻ ion is 1s²2s²2p⁵.
What is an electronic configuration?The electron configuration can be described as how electrons are distributed in different energy levels or electron shells of an atom of an element. In the electron configuration of an atom, the number of electrons can be written as a superscript of electron atomic subshells. For example, the electron configuration of magnesium can be written as 1s²2s²2p⁶3s².
The principal quantum number (n) can be defined as the maximum number of electrons that can be filled in an electron shell of an atom. The formula used to determine is 2n², where ‘n’ is the principal quantum number.
The atomic number of the nitrogen atom is 7 and the electronic configuration is 1s²2s²2p³. When it gains two electrons then it has 9 electrons in total. The nine electrons can be filled as 1s²2s²2p⁵.
Therefore, the electronic configuration of the N²⁻ ion is 1s²2s²2p⁵.
Learn more about electronic configuration, here:
brainly.com/question/5624100
#SPJ2
which of the following is not true for chemical change
Answer:
"They can be reversed by physical changes."
Explanation:
A chemical change can form a new substance, can be detected by the change in color and they have properties different from their starting materials.
Sodium, Na, is a metallic element.
Explain, with the aid of a labelled diagram, what is meant by the term metallic bonding.
Answer:
metallic bonding is the bond form between two or more metal elements or between metal element and the other group elements
Acetylene (C2H2) gas and oxygen (02) gas react to form carbon dioxide (CO2) gas and water (H20) vapor. Suppose you have 2.0 mol of C,H, and 1.0 mol
of o, in a reactor
Calculate the largest amount of CO, that could be produced. Round your answer to the nearest 0.1 mol.
The largest amount of CO₂ produced when 2 moles of C₂H₂ reacted with 1 mole of O₂ is 0.8 mole
We'll begin by writing the balanced equation for the reaction. This is given below:
2C₂H₂ + 5O₂ —> 4CO₂ + 2H₂O
2 : 5
2 : 1
From the balanced equation above,
We can see that O₂ is the limiting reactant as lesser amount of it is available.
Finally, we shall determine the largest amount of CO₂ produced by using the limiting reactant as illustrated below:
From the balanced equation above,
5 moles of O₂ reacted to produce 4 moles of CO₂.
Therefore,
1 mole of O₂ will react to produce = 4/5 = 0.8 mole of CO₂.
Thus, the largest amount of CO₂ produced from the reaction is 0.8 mole
Learn more: https://brainly.com/question/25299182
What part of the scientific method involves drawing inferences about experimental results and determining if the collected data support the original hypothesis?
Asking a question
Conducting research
Constructing a hypothesis
Drawing conclusions
Answer:
Drawing conclusions
Explanation:
Calculate the number of Calories in a 5 fluid oz glass of red wine that contains 2.1 g carbohydrate and 13.8 g alcohol.
Answer:
ù
Explanation:
What are the 26 states of matter?
Bose–Einstein condensate.
Fermionic condensate.
Degenerate matter.
Quantum Hall.
Rydberg matter.
Rydberg polaron.
Strange matter.
Superfluid
In this case, the amount of calories is 105 calories.
One gram of alcohol provides approx. 7 calories, whereas one gram of carbohydrates contains 4 calories.In this case, the number of calories can be calculated by summing the calories provided by alcohol and carbohydrates.Number of calories = (2.1g x 4) + (13.8g x 7) = 8.4 + 96.6 = 105 calIn conclusion, the amount of calories, in this case, is 105 calories.
Learn more in:
https://brainly.com/question/11460467
what happens to a circuits resistance (R), voltage (V), and current (I) when you increase the diameter of the wire in the circuit?
a. R increases, V is constant, I increases
b. R decreases, V is constant, I increases
c. R decreases, V increases, I increases
d. R increases, V decreases, I decreases
Answer:
b. R decreases, V is constant, I increases
Explanation:
when we increase the diameter of wire increases ,resistance decreases and current increases.Therefore, the option is b.
Resistance is an electrical quantity which opposes the electric current in the circuit. Resistance is directly proportional to the length of the wire and inversely proportional to the diameter of the wire. If length of wire increases resistance will increases and if the diameter of the wire increase resistance will decreases.
R = ρ L/A
Here ρ is the resistivity
L is the length of the wire
A is the cross-sectional area of wire/diameter of the wire
Voltage is the potential difference between two terminals of voltage source. Current is the flow of electrons in the circuit. Voltage is the product of current and resistance.
V=IR
Rewrite the above equation interms of current
I=V/R
From the above equation we can say that current is inversly proportional to the resistance.Therefore,the correct option is b.
Learn more about,resistance
https://brainly.com/question/4289257
