Four identical balls are thrown from the top of a cliff, each with the same speed. The
first is thrown straight up, the second is thrown at 30° above the horizontal, the third
at 30° below the horizontal, and the fourth straight down. How do the speeds and
kinetic energies of the balls compare as they strike the ground? Ignore the effects of
air resistance. Explain fully using the concepts from this unit.

Answers

Answer 1

The comparison of the speeds and kinetic energy of the identical balls are as follows

The speed and the kinetic energy of the first and fourth ball are equal, while the speed and kinetic energy of the second and third balls are equal

The reason for the above comparison results areas follows;

Known parameters;

First ball is thrown straight up

Second ball is thrown 30° above the horizontal

Third ball it thrown 30° below the horizontal

The fourth ball is thrown straight down

Unknown:

Comparison of the speed and kinetic energy of the four balls

Method:

The kinetic energy, K.E. = (1/2) × m × v²

The velocity of the ball, v = u × sin(θ)

Where;

u = The initial velocity of the ball

θ = The reference angle

For the first ball thrown straight up, we have;

θ = 90°

∴ [tex]v_y[/tex] = u

The final velocity of the ball as it strikes the ground is v₂ = u² + 2gh

Where;

h = The height of the cliff

∴ Kinetic energy of first ball, K.E.₁ = (1/2) × m × (u₁² + 2gh)²

For the second ball thrown 30° to the horizontal, we have;

K.E. = (1/2) × m × ((u×sin30)² + 2·g·h)² = K.E. = (1/2) × m × ((0.5·u)² + 2·g·h)²

Kinetic energy  K.E.₂ = (1/2) × m × ((0.5·u₂)² + 2·g·h)²

For the third ball thrown at 30° below the horizontal, we have;

K.E. = (1/2) × m × ((u×sin30)² + 2·g·h)² = K.E. = (1/2) × m × ((0.5·u)² + 2·g·h)²

Kinetic energy K.E.₃ = (1/2) × m × ((0.5·u₃)² + 2·g·h)²

For the fourth ball thrown straight down, we have;

Kinetic energy K.E.₄ = (1/2) × m × (u₄² + 2gh)²

Therefore, as the ball strike the ground, the speed and the kinetic energy of the first and fourth ball are equal, while the speed and kinetic energy of the second and third balls are equal

u₁ = u₄, K.E₁ = K.E.₄, u₂ = u₃, K.E₂ = K.E.₃

Learn more about object kinetic energy of objects in free fall here;

https://brainly.com/question/14872097


Related Questions

1:
Forces and Motion:Question 2
A car is travelling east, when suddenly a more massive car travelling
north hits it with a greater force. What is likely to happen to the car
that was originally travelling east?

Answers

Explanation:

the car will be brought back

friction always opposes the _____​

Answers

Answer:

Friction always opposes the motion

I HOPE ITS RIGHT IF NOT THEN SORRY

HAVE A GREAT DAY :)

The primary purpose of a switch in a circuit is to ___________.

A)either open or close a conductive path
B)change a circuit from parallel to series
C)change a circuit from series to parallel
D)store a charge for later use

Answers

Answer:

store a charge for later use

You have a 1 W light bulb in your lab. It puts out light of only 1 frequency. The wavelength of this light is 500nm. you set up a detector with a surface area of 1 square centimeter facing the light source at a distance of 100m.

Required:
a. Find the number of photons hitting the detector every second.
b. What is the maximum E field of the E M wave hitting the detector?
c. What is the maximum value of the B field of this E M wave?
d. How far away would you have to place the detector to only receive 1 photon per second from the light bulb?

Answers

Answer:

a)   # _photon = 2.5 10¹⁸ photons / s,   b) E = 10⁻² N / C,  c)     B = 3 10⁻¹¹ T

d)  r=  2 10⁹ m

Explanation:

a) Let's solve this exercise in part, let's start by finding the energy of each photon using the Planck relation

          E₀ = h f

          c = λ f

          E₀ = h c /λ

          E₀ = 6.63 10⁻³³⁴   3 10⁸/500 10⁻⁹

          E₀ = 3.978 10⁻⁻¹⁹ J

Let's use a direct ratio rule to find the number of photons

         #_foton = E / Eo

         #_fototn = 1 / 3.978 10⁻¹⁹

         # _photon = 2.5 10¹⁸ photons / s

b) The intensity received by the detector is related to the electric field

          I = E²

Let's look for the intensity that the detector receives, suppose that the emission is shapeless throughout the space

          I = P / A

          P = I A

Let's use index 1 for the point on the bulb and index 2 for the point on the detector.

The area of ​​a sphere is

          A = 4π r²

         P = I₁ A₁ = I₂ A₂

         I₁ r₁² = I₂ r₂²

         I₂ = I₁  r₁²/r₂²

         I₂ = I₁    1 / 100²

         I₂ = I₁ 10⁻⁴

we must know the intensity at the output of the bulb suppose that I₁ = 1 J

          I₂ = 10⁻⁴ J

let's look for the electric field

         E =√I

         E = √10⁻⁴

         E = 10⁻² N / C

c) for the calculation of the magnetic field we use that the field is in phase

               E / B = c

               B = E / c

               B = 10⁻² / 3 10⁸

               B = 3 10⁻¹¹ T

d) Let's use a direct proportions rule if we fear 2.5 10¹⁸ photons in an area  A = 4π R² where R = 100 m how many photons are there in the area of ​​the detector r = 1 cm,   A’= 10⁻⁴ m²

             #_photons = 2.5 10¹⁸ A_detector / A_sphere

             #_photons = 2.5 1018 10-4 / 4π 10⁴

             #_photons = 2 10⁹ photons in the detector area

for the number of photons to decrease to 1, the radius of the sphere must be 2 10⁹ m

F=(4i+3j)N acts on an object of mass m=2k.g and drags it by moving the object from origion to x=5m. Find the workdone on the object and the angle between the force and the displacement​

Answers

Answer:

nnnjjdndbsnnshfhhgbfbdbdh

which planet composed entirely of hydrogen and helium?​

Answers

Answer:

The composition of Jupiter is similar to that of the Sun—mostly hydrogen and helium. Deep in the atmosphere, pressure and temperature increase, compressing the hydrogen gas into a liquid. This gives Jupiter the largest ocean in the solar system—an ocean made of hydrogen instead of water.

Explain how newton's first law of motion follows from second law?​

Answers

Answer:

Newton's First Law of Motion states that a body will stay at rest or continue its path with constant velocity unless an external force acts upon it. Newton's Second Law of Motion states that the net force that acts upon a body is equal to the mass of the body multiplied by the acceleration due to the net force.

You attach a 2.30 kg weight to a horizontal spring that is fixed at one end. You pull the weight until the spring is stretched by 0.500 m and release it from rest. Assume the weight slides on a horizontal surface with negligible friction. The weight reaches a speed of zero again 0.400 s after release (for the first time after release). What is the maximum speed of the weight (in m/s)

Answers

Answer: [tex]3.92\ m/s[/tex]

Explanation:

Given

Mass of the attached object is [tex]m=2.3\ kg[/tex]

Spring is stretched by [tex]A=0.5\ m[/tex]

Speed reaches zero after [tex]t=0.4\ s[/tex]

Speed is zero at the extremities of the S.H.M motion that is

[tex]\Rightarrow \dfrac{T}{2}=0.4\\\\\Rightarrow T=0.8\ s[/tex]

Time period of motion is [tex]0.8\ s[/tex] which can also be given by

[tex]\Rightarrow \omega T=2\pi\\\\\Rightarrow \omega=\dfrac{2\pi }{T}\\\\\Rightarrow \omega =\dfrac{2\pi }{0.8}\\\\\Rightarrow \omega=\dfrac{5\pi }{2}[/tex]

Maximum speed for S.H.M. is [tex]v_{max}=A\omega[/tex]

[tex]\Rightarrow v_{max}=0.5\times 2.5\pi\\\Rightarrow v_{max}=3.92\ m/s[/tex]

You and your friends find a rope that hangs down 11 m from a high tree branch right at the edge of a river. You find that you can run, grab the rope, swing out over the river, and drop into the water. You run at 2.0 m/s and grab the rope, launching yourself out over the river.

Required:
How long must you hang on if you want to drop into the water at the greatest possible distance from the edge?

Answers

Answer:

if you want to drop into the water at the greatest possible distance from the edge, you must hang for 1.662s.

Explanation:

The time period of the oscillation is,

[tex]T = 2\pi \sqrt{ \frac{I} {g }[/tex]

[tex]T = 2\pi \sqrt{\frac{11}{9.8} } \\\\T= 6.65 s[/tex]

This would be the time taken for the person to move from.

The duration of time he hangs over the river be one-fourth of the time period.

Here,

[tex]t= \frac{T}{4} \\\\t=\frac{6.65}{4}\\\\t = 1.662 s[/tex]

What type of wave is a microwave?
O heat
O longitudinal
sound
transverse

Answers

Answer:

Microwave is a types of a electromagnetic radiation

Answer:

Transvers

Explanation:

Because microwave is electromagnetic  waves and all electromagnetic waves are transvers.

what is threshold frequency?​

Answers

Answer:

"the minimum frequency of radiation that will produce a photoelectric effect."

Explanation:

That answer was derived from gogle cuz my explanations was harder to explain but good luck

Consider a box with two gases separated by an impermeable membrane. The membrane can move back and forth, but the gases cannot penetrate the membrane. The left side is filled with gas A and the right side is filled with gas B. We will assume that equipartition applies to both gases, but gas A has an excluded volume due to large molecules so its entropy has a different formula.

SA=NAkln(VA+ bNA)+f(UA,NA)
SB=NBkln(VB)+f(UB,NB)

Required:
If NA= 1 moles, NB = 2 moles, the total volume of the box is 1 m3, and b= 4 × 10-4 m3/mole, then find the equilibrium value of VA by maximizing the total entropy.

Answers

Answer:

The answer is "[tex]0.3336\ m^3[/tex]"

Explanation:

Using the Promideal gas law:

[tex]P_A=P_B\\\\P_A(V_A-\eta_A b)= \eta_A RT......(1)\\\\P_B V_B=\eta_B \bar{R}T........(2)\\\\From (1) \zeta (2)\\\\[/tex]  

[tex]\frac{\eta_A}{V_A-\eta_A b}=\frac{\eta B}{V B}\\\\ \frac{V A- \eta_A b}{V B}=\frac{\eta A}{\eta B }\\\\ \frac{V A-b}{V B}=\frac{1}{2}\\\\V A+V B=1\\\\V B =1- V A\\\\\frac{V A-b}{1-V A}=\frac{1}{2}\\\\2V A-2b=1-V A\\\\3 V A=1+2b\\\\V A=\frac{1+2b}{3}\\\\[/tex]

      [tex]=\frac{1+2(4\times 10^{-4})}{3}\\\\=0.3336\ m^3[/tex]

The equilibrium value of Va is 0.3336 m³.

Ideal gas law

The equilibrium value of Va is determine by applying ideal gas law as shown below;

Pressure of gas A = Pressure of gas B

Pa = Pb

Pa(Va - nab) = naRT----(1)

PbVb = nbRT -----(2)

Solve equation (1) and (2)

[tex]\frac{P_b}{RT} = \frac{n_b}{V_b} \\\\\frac{P_b}{P_a(V_a- n_ab)/n_a} = \frac{n_b}{V_b}\\\\\frac{n_a}{V_a - n_ab} = \frac{n_b}{V_b} \\\\\frac{V_a - n_ab}{V_b} = \frac{n_a}{n_b} \\\\\frac{V_a - b}{V_b} = \frac{1}{2}[/tex]

Va + Vb = 1

Vb = 1 - Va

[tex]\frac{V_a - b}{1 - V_a} = \frac{1}{2}[/tex]

2Va - 2b = 1 - Va

3Va = 1 + 2b

[tex]V_ a = \frac{1 + 2b}{3} \\\\V_a = \frac{1 + (2 \times 4\times 10^{-4})}{3} \\\\V_a = 0.3336 \ m^3[/tex]

Thus, the equilibrium value of Va is 0.3336 m³.

Learn more about equilibrium value here: https://brainly.com/question/22569960

Một bơm cánh gạt thủy lực có lưu lượng thực là 20lít/phút, tạo áp suất 230 bar, tốc độ bơm là 1400 vòng/phút. Biết công suất đầu vào là 10kW và hiệu suất cơ là 88%.
a) Tính hiệu suất thể tích của bơm
b) Tính thể tích riêng của bơm (cm/vòng). Câu 3 (2,5đ): Thiết kế hệ thống truyền động khí nén để điều khiển 02 xylanh tác động đơn, sử dụng 02 van đảo chiều 3/2 tác động bằng nút nhấn, 02 van tiết lưu - một chiều. Trình bày nguyên lý làm việc của của hệ thống.

Answers

Answer:

English please?

Explanation:

Explain in english?

I’m a photoelectric effect, which property of the incident light determines how much kinetic energy the ejected electrons have ?
A) brightness
B) frequency
C) size of the beam
D) none of the above

Answers

Answer:

b = frequency

If a boy lifts a mass of 6kg to a height of 10m and travels horizontally with a constant velocity of 4.2m/s, calculate the work done? Explain your answer.

Answers

Answer:

W = 641.52 J

Explanation:

The work done here will be the sum of potential energy and the kinetic energy of the boy. Here potential energy accounts for vertical motion part while the kinetic energy accounts for the horizontal motion part:

[tex]Work\ Done = Kinetic\ Energy + Potential\ Energy\\\\W = K.E +P.E\\\\W = \frac{1}{2}mv^2+mgh\\\\[/tex]

where,

W = Work Done = ?

m = mass = 6 kg

v = speed = 4.2 m/s

g = acceleration dueto gravity = 9.81 m/s²

h = height = 10 m

Therefore,

[tex]W = \frac{1}{2}(6\ kg)(4.2\ m/s)^2+(6\ kg)(9.81\ m/s^2)(10\ m)[/tex]

W = 52.92 J + 588.6 J

W = 641.52 J

The resistance of the light bulb changed as the voltage (and current) changed. Why does this resistance change occur?

Answers

This resistance current is directly proportional to voltage and inversely proportional to resistance. In other words, as the voltage increases, so does the current. Hope this helps !!

1.03 Transformation of energy flvs science question

Answers

Explanation:

the process of conversion of energy from one form to another is called transformation of energy.

If at a particular instant and at a certain point in space the electric field is in the x-direction and has a magnitude of 3.70 V/m, what is the magnitude of the magnetic field of the wave at this same point in space and instant in time

Answers

Answer:

the magnitude of the magnetic field is 1.23 x 10 T.

Explanation:

Given;

magnitude of the electric field, E = 3.7 V/m

The magnitude of the magnetic field is calculated as;

E = cB

where;

B is the magnitude of the magnetic field

c is the speed of light = 3 x 10⁸ m/s

From the above equation, the magnetic field, B, is calculated as;

[tex]B = \frac{E}{c} \\\\B = \frac{3.7 }{3\times 10^8 } \\\\B = 1.23 \times 10^{-8 } \ T[/tex]

Therefore, the magnitude of the magnetic field is 1.23 x 10⁸ T.

A crude approximation is that the Earth travels in a circular orbit about the Sun at constant speed, at a distance of 150,000,000 km from the Sun. Which of the following is the closest for the acceleration of the Earth in this orbit?
A. exactly 0 m/s2.
B. 0.006 m/s2.
C. 0.6 m/s2.
D. 6 m/s2.
E. 10 m/s2.

Answers

Answer:

The answer is "Option B".

Explanation:

[tex]r=15\times 10^{7}\ km\ = 15\times 10^{10}\ m\\\\w=\frac{2\pi}{1\ year}\\\\=\frac{2\pi}{1\times 365.24 \times 24 \times 60 \times 60\ sec}\\\\a=w^2r\\\\=(\frac{2\pi}{1\times 365.24 \times 24 \times 60 \times 60\ sec})^2 \times 15 \times 10^{10}\ \frac{m}{s^2}\\\\[/tex]

[tex]=5.940 \times 10^{-3} \ \frac{m}{s^2}\\\\=6 \times 10^{-3} \ \frac{m}{s^2}\\\\=0.006\ \frac{m}{s^2}\\\\[/tex]

A car's bumper is designed to withstand a 6.12 km/h (1.7-m/s) collision with an immovable object without damage to the body of the car. The bumper cushions the shock by absorbing the force over a distance. Calculate the magnitude of the average force on a bumper that collapses 0.210 m while bringing a 810 kg car to rest from an initial speed of 1.7 m/s.

Answers

Answer:

5572.8 N

Explanation:

Applying,

F  = ma.............. Equation 1

Where F = Force, m = mass of the car, a = acceleration.

We can find a by applying,

v² = u²+2as............. Equation 2

Where v = final velocity, u = initial velocity, a = acceleration,  = distance.

From the question,

Given: v = 0 m/s (come to rest), u = 1.7 m/s, s = 0.210 m

Substitute these value into equation 2

0² = 1.7²+2×0.21×a

a = -1.7²/(2×0.21)

a = -2.89/0.42

a = -6.88 m/s²

Also given: m = 810 kg

Substitute these value into equation 1

F = 810(-6.88)

F = -5572.8 N

Hence the force on the bumber is 5572.8 N

Which circuit element is of special importance in AC circuits?
A. Resistor
B. Ammeter
C. Battery
D. Capacitor​

Answers

Answer:

Explanation:capacitor

Answer:

Ammeter

Explanation:

pls mark me as a brainlist

An auto mechanic needs to determine the emf and internal resistance of an old battery. He performs two measurements: in the first, he applies a voltmeter to the battery's terminals and reads 11.9 V;11.9 V; in the second, he applies an ammeter to the terminals and reads 16.1 A.16.1 A.
What are the battery's emf E and internal resistance r?

Answers

Answer:

Hence the battery's emf E is ε = 11.9 V.

The internal resistance is r = 0.739 ohms.

Explanation:

Now we know that

Voltage V = 11.9 V.

Current I = 16.1 A.

Hence this is an ideal voltmeter there are no current flows when the Voltmeter is applied.

ε = V + I r

∵ I = 0

ε = V

ε = 11.9 V

Then the ammeter is applied.

Let's take ( r ) to be the total resistance which is equal to internal resistance.

V = I r

r = [tex]\frac{V}{I}[/tex]

 [tex]= \frac{11.9}{16.1}[/tex]

r = 0.739 ohms

The battery's emf (E) and internal resistance (r) are 11.9 Volts and 0.739 Ampere respectively.

Given the following data:

Voltage = 11.9 Volts.Current = 16.1 Amperes.

To determine the battery's emf (E) and internal resistance (r):

How to calculate emf (E).

For an ideal voltmeter, there isn't a flow of current and as such the current is equal to 0.

Mathematically, emf (E) is given by this formula:

[tex]E = V + IR[/tex]

Substituting the given parameters into the formula, we have;

[tex]E = 11.9 + 0R\\\\E = 11.9 + 0[/tex]

E = 11.9 Volts.

For the internal resistance (r):

Note: The total resistance is equal to internal resistance.

Applying Ohm's law, we have:

[tex]R = \frac{V}{I} \\\\R = \frac{11.9}{16.1}[/tex]

R = r = 0.739 Ampere.

Read more current here: https://brainly.com/question/25813707

A bar of steel has the minimum properties Se = 40 kpsi, Sy = 60 kpsi, and Sut = 80 ksi. The bar is subjected to a steady torsional stress of 15 kpsi and an alternating bending stress of 25 ksi. Find the factor of safety guarding against a static failure, and either the factor of safety guarding against a fatigue failure or the expected life of the part. For the fatigue analysis use Modified Goodman criterion.

Answers

Answer:

The correct solution is:

(a) 1.66

(b) 1.05

Explanation:

Given:

Bending stress,

[tex]\sigma_b = 25 \ kpsi[/tex]

Torsional stress,

[tex]\tau= 15 \ kpsi[/tex]

Yield stress of steel bar,

[tex]\delta_y = 60 \ kpsi[/tex]

As we know,

⇒ [tex]\sigma_{max}^' \ = \sqrt{\sigma_b^2 + 3 \gamma^2}[/tex]

        [tex]= \sqrt{(25)^2+3(15)^2}[/tex]

        [tex]=36.055 \ kpsi[/tex]

(a)

The factor of safety against static failure will be:

⇒ [tex]\eta_y = \frac{\delta_y}{\sigma_{max}^'}[/tex]

By putting the values, we get

        [tex]=\frac{60}{36.055}[/tex]

        [tex]=1.66[/tex]

(b)

According to the Goodman line failure,

[tex]\sigma_a = \sigma_b = 25 \ kpsi[/tex]

[tex]S_e = 40 \ kpsi[/tex]

[tex]\sigma_m = \sqrt{3} \tau[/tex]

     [tex]=\sqrt{3}\times 15[/tex]

     [tex]=26 \ kpsi[/tex]

[tex]Sut = 80 \ kpsi[/tex]

⇒ [tex]\frac{\sigma_a}{S_e} +\frac{\sigma_m}{Sut} =\frac{1}{\eta_y}[/tex]

      [tex]\frac{25}{40}+\frac{26}{80}=\frac{1}{\eta_y}[/tex]

              [tex]\eta_y = 1.05[/tex]

A car can go from 0 to 60 m/s in 5 seconds. What is the acceleration?

A) 50 m/s^2

B) 6 m/s^2

C) 12 m/s^2

D) 300 m/s^2

I think it’s 12 because I did the difference divided by 5 but some places said there was no acceleration

Answers

Answer:

12

Explanation:

i agree the answer is 12 because the acceleration is given by the difference in the velocity divided by the time taken

a=v-u/t

60-0/5

=12m/s²

I hope this helps

How can I solve the following?

In (Figure 1), let V = 15.0 V and C1=C2=C3= 24.2 μF.

Part A: How much energy is stored in the capacitor network as shown in (Figure 1)?

Part B: How much energy would be stored in the capacitor network if the capacitors were all in series?

Part C: How much energy would be stored in the capacitor network if the capacitors were all in parallel?

Answers

Answer:

Part A - 4.084 mJ

Part B - 0.908 mJ

Part C - 8.168 mJ

Explanation:

Part A: How much energy is stored in the capacitor network as shown in (Figure 1)?

Since capacitors C₂ and C₃ are in series, their equivalent capacitance is C',

1/C' = 1/C₂ + 1/C₃      (Since C₁ = C₂ = C₃ = C)

1/C' = 1/C + 1/C

1/C' = 2/C

C' = C/2

Since C' is in parallel with C₁, the equivalent capacitance for the circuit is C" = C₁ + C' = C + C/2 = 3C/2

C" = 3C/2

The energy stored in the circuit, W = 1/2C"V² where C" = equivalent capacitance = 3C/2 and V = voltage = 15.0 V

W = 1/2C"V²

W = 1/2(3C/2)V²

W = 3CV²/4

since C = 24.2 μF = 24.2 × 10⁻⁶ F

W = 3CV²/4

W = 3 × 24.2 × 10⁻⁶ F (15.0 V)²/4

W = 3 × 24.2 × 10⁻⁶ F × 225 V²/4

W = 16335/4 × 10⁻⁶ FV²

W = 4083.75 × 10⁻⁶ J

W = 4.08375 × 10⁻³ J

W = 4.08375 mJ

W ≅ 4.084 mJ

Part B: How much energy would be stored in the capacitor network if the capacitors were all in series?

If the capacitors are connected in series, their equivalent resistance is C'

and 1/C' = 1/C₁ + 1/C₂ + 1/C₃

Since C₁ = C₂ = C₃ = C

1/C' = 1/C + 1/C + 1/C

1/C' = 3/C

C' = C/3

The energy stored in the circuit, W = 1/2C'V² where C' = equivalent capacitance = C/3 and V = voltage = 15.0 V

W = 1/2C'V²

W = 1/2(C/3)V²

W = CV²/6

since C = 24.2 μF = 24.2 × 10⁻⁶ F

W = CV²/6

W = 24.2 × 10⁻⁶ F (15.0 V)²/6

W = 24.2 × 10⁻⁶ F × 225 V²/6

W = 5445/6 × 10⁻⁶ FV²

W = 907.5 × 10⁻⁶ J

W = 0.9075 × 10⁻³ J

W = 0.9075 mJ

W ≅ 0.908 mJ

Part C: How much energy would be stored in the capacitor network if the capacitors were all in parallel?

If the capacitors are connected in parallel, their equivalent resistance is C'

and C' = C₁ + C₂ + C₃

Since C₁ = C₂ = C₃ = C

C' = C + C + C

C' = 3C

The energy stored in the capacitor network, W = 1/2C'V² where C' = equivalent capacitance = 3C and V = voltage = 15.0 V

W = 1/2C'V²

W = 1/2(3C)V²

W = 3CV²/2

since C = 24.2 μF = 24.2 × 10⁻⁶ F

W = 3CV²/2

W = 3 × 24.2 × 10⁻⁶ F (15.0 V)²/2

W = 3 × 24.2 × 10⁻⁶ F × 225 V²/2

W = 16335/2 × 10⁻⁶ FV²

W = 8167.5 × 10⁻⁶ J

W = 8.1675 × 10⁻³ J

W = 8.1675 mJ

W ≅ 8.168 mJ

Hey guys,I hope u r gonna answer this question fast,SI system is extended from of MKS system.Why? I will be waiting for the answer. Good luck thank u​

Answers

Answer:

Because SI system has fundamental units of MKS System

Answer:

Explanation: the unit of length ,mass , and time are same in both the system , thus, the SI system is the extended from of MKS system.

The potential difference between the plates of a capacitor is 234 V. Midway between the plates, a proton and an electron are released. The electron is released from rest. The proton is projected perpendicularly toward the negative plate with an initial speed. The proton strikes the negative plate at the same instant the electron strikes the positive plate. Ignore the attraction between the two particles, and find the initial speed of the proton.
I have tried looking at the cramster.com solution manual and do not like the way it is explained. Simply put, I cannot follow what is going on and I am looking for someone who can explain it in plain man's terms and help me understand and get the correct answer. I am willing to give MAX karma points to anyone who can help me through this. Thank you kindly.

Answers

Answer:

The speed of proton is 2.1 x 10^5 m/s .

Explanation:

potential difference, V = 234 V

let the initial speed of the proton is v.

The kinetic energy of proton is

KE = q V

[tex]0.5 mv^2 = e V \\\\0.5\times 1.67\times 10^{-27} v^2 = 1.6\times 10^{-19} \times 234\\\\v=2.1\times 10^5 m/s[/tex]

Which of the following is not an example of approximate simple harmonic motion

Answers

Answer:

where are the options

it's not full question

a stone is thrown vertically upwards with a velocity of 20 m per second determine the total time of flight of stone in air​

Answers

Answer:

Explanation:

The best way to do this is to remember the rule about the halfway mark in a parabolic path. At a trajectory's half way point in its travels, it will be at its max height. To get the total time in the air, we take that time at half way and double it. Here's what we know that we are told:

initial velocity is 20 m/s

Here's what we know that we are NOT told:

a = -9.8 m/s/s and

final velocity is 0 at an object's max height in parabolic motion.

We will use the equation:

[tex]v=v_0+at[/tex] where v is final velocity and v0 is initial velocity. Filling in:

0 = 20 + (-9.8)t and

-20 = -9.8t so

t = 2 seconds. The stone reaches its max height 2 seconds after it is thrown; that means that after another 2 seconds it will be on the ground. Total air time is 4 seconds.

A proton traveling at 17.6° with respect to the direction of a magnetic field of strength 3.28 mT experiences a magnetic force of 9.14 × 10-17 N. Calculate (a) the proton's speed and (b) its kinetic energy in electron-volts.

Answers

Answer:

a) The proton's speed is 5.75x10⁵ m/s.

b) The kinetic energy of the proton is 1723 eV.  

Explanation:

a) The proton's speed can be calculated with the Lorentz force equation:

[tex] F = qv \times B = qvBsin(\theta) [/tex]     (1)          

Where:

F: is the force = 9.14x10⁻¹⁷ N

q: is the charge of the particle (proton) = 1.602x10⁻¹⁹ C

v: is the proton's speed =?

B: is the magnetic field = 3.28 mT

θ: is the angle between the proton's speed and the magnetic field = 17.6°

By solving equation (1) for v we have:

[tex]v = \frac{F}{qBsin(\theta)} = \frac{9.14 \cdot 10^{-17} N}{1.602\cdot 10^{-19} C*3.28 \cdot 10^{-3} T*sin(17.6)} = 5.75 \cdot 10^{5} m/s[/tex]

Hence, the proton's speed is 5.75x10⁵ m/s.

b) Its kinetic energy (K) is given by:

[tex] K = \frac{1}{2}mv^{2} [/tex]

Where:

m: is the mass of the proton = 1.67x10⁻²⁷ kg

[tex] K = \frac{1}{2}mv^{2} = \frac{1}{2}1.67 \cdot 10^{-27} kg*(5.75 \cdot 10^{5} m/s)^{2} = 2.76 \cdot 10^{-16} J*\frac{1 eV}{1.602 \cdot 10^{-19} J} = 1723 eV [/tex]  

Therefore, the kinetic energy of the proton is 1723 eV.

I hope it helps you!        

Other Questions
Which social reform occurred in Great Britain during the Victorian era? Use the maps to answer the following question:These maps show ancient settlements in India and China. Why might people initially have chosen these places to live? The fertile floodplains were good places to grow food. The oceans provided good drinking water for the population. The ocean was an important source of salt for curing meat. The mountains were rich with plants and animals. Measuring PulseTo take your pulse, you press your fingers against an artery near the surface of the body. What are you feeling and measuring when you take your pulse? Why cant you take your pulse by pressing your fingers against a vein? Please help trigonometry What is the average speed of the car ?? The distance between two cities on a map is 3. 5 centimeters. The map uses a scale in which 1 centimeter represents 20 kilometers. What is the actual distance between these two cities in kilometers?. What is the approximate area of the circle, in square centimeters? Use 3.14 for (pi). Record your answer on the grid. then fill in the bubbles. Need help l dont understand due soon Find the solution Y = -3x - 5 what information about a cisco router can be verified using the show version command? A donut shop made 50 donuts. They put frosting on 2 of the donuts. What is the ratio of thenumber of donuts with frosting to the number of donuts without frosting?50:482:4850:22:4Submit Mike Jones bought a new split-level home for $150,000 with 20% down. He decided to use Victory Bank for his mortgage. They were offering for 25-year mortgages. Provide Mike with an amortization schedule for two periods. (Use Table 15.1(b)). (Do not round intermediate calculations. Round your answers to the nearest cent.) Payment number Portion to Balance of loan Interest Principal outstanding 1 2 Deshaun has 38 carnival tickets.It costs 5 tickets to ride the roller coaster.How many rides can he take? I need help with this please 3. What was one reason why Barack Obama was successful? What is another way to represent 3%?A) 0.3B) 3C) 0.03D) 3/10 Drag each label to the correct location on the chart. Not all labels will be used. Ramiro is 3/10 as tall as the flagpole. The flagpole is 5/9 as tall as the nearby tree. The tree is 32 2/5 feet tall. How tall is Ramiro? help plz I don't know what I'm doing Which dialogue is punctuatedcorrectly?A. The principal said "I am proud of how the studentsdid in the musical"!B. "Me too!" the music teacher replied, "They did agreat job practicing every single day".C. One of the music students called out, "Our teacherwas a big help as well!"