Answer:
Physical.
Explanation:
Nothing changes in a chemical state just adding hot air to a balloon.
I'm pretty sure this is classified as a chemical change.
Why are black holes so difficult to detect?
Answer:
Black holes are so dense that light cannot escape from them, and they are difficult to detect. Satellites above the Earth's atmosphere can detect bursts of high energy radiation given off by black holes. Dozens of stellar black holes have already been detected in the Milky Way, where there may be tens of millions more.
Explanation:
Which question is scientifically testable, allowing a conclusion to be made based on scientific evidence? A) Are cats better than dogs? B) Are cats happy when they climb trees? C) Are dogs happy when they go on a walk? D) Are cats more active at night than during the day? dont mind the subject its supposed to be science
Answer:
c or b
Explanation:
it is not d because my cats sleep all night
it is not a because i like cats but my friend loves dogs
Answer:
Answer is C
Explanation:
are cats more active at night than the day?
Microwave Miracle: Patrick believes that if fish eat microwaved food then they be able to swim through a maze faster. He decides to perform an experiment by placing fish food in a microwave for 20 seconds. He has the fish swim through a maze and records the time it takes for each one to make it to the end. He feeds the microwaved food to 10 fish (group A) and gives regular food to 10 others (group B). After 1 week, he has the fish swim through the maze again and records the times for each. Which fish are in the control group? * Group A Group B Microwaved Food Non-microwaved Food
Answer:
Group B
Explanation:
The fish in group B are those in the control group.
A control group during an experiment represents a group of the subject that is subjected to all experimental variables except the independent variable - the manipulate-able variable that is supplied by the experimenter which directly affects the dependent variable.
In this case, the independent variable is the type of food given to the two groups of fishes - microwaved or regular food while the dependent variable is the time it takes for the fishes to swim through the maze. Since the focus of the experiment is to see if microwaved food enhances the swimming speed of fishes, the group of fish that receives microwaved food would represent the treatment group while those that received regular food would be the control group.
Hence, group B represents the control group.
it can be formed by atoms sharing electrons or by negative and positive
ions joining).. is it mixture or compound ?
Answer:
VVV
Explanation:
Covalent bonds are formed when atoms share electrons and ionic bonds are formed when positive and negative ions bond to form an ionic compound.
does changing the size of a substance affect its density
Answer:
yes
Explanation:
a) Why is mole called fundamental
un
b) State the law of moment.
Explanation:
The mole is the amount of substance of a system which contains as many elementary entities as there are atoms in 0.012 kilogram of carbon 12. The mole is defined in terms of the physical properties of a real object, the carbon atom. Therefore it is a base unit. ...
All isotopes of sodium (Na) must have,
Answer:
11 protons and 11 electrons.
Explanation:
Na is a neutral element and element number 11.
This means that it has 11 protons and 11 electrons.
In order to create an isotope, you would add or get rid of neutrons to get different mass numbers but the same element. The number of protons and electrons would remain the same.
Which of the following is a physical blend of two or more substances with uniform composition? Select all that apply.
A. Homogeneous mixture
B. Heterogeneous mixture
C. Solution
D. Pure substance
Answer:
homogeneous mixture
Explanation:
A homogeneous mixture and Solution are the physical blend of two or more substances with uniform composition. Thus, options A and C are true.
What do you mean by Mixture?“Mixture is an act of combining two or more chemical substances that are not chemically linked.”
Types of mixtures –
There are two main types of mixture.
Homogeneous Mixture –
A Homogeneous Mixture is a mixture in which composition is uniform throughout the mixture, and it appears like a single substance.
Example – Air is a homogeneous mixture of gas etc.
Heterogeneous mixture –
A Heterogeneous mixture is a mixture in which composition is not uniform throughout the mixture.
Example – Vegetable soup is a heterogeneous mixture etc.
Solution –
A Solution is a homogeneous mixture of two or more solutes dissolved in a solvent.
Example – Solution of sugar in water etc.
Thus, a homogeneous mixture and solution are the physical blends of two or more substances with uniform composition. Thus, options A and C are true.
To learn more about mixture, refer to the below link:
https://brainly.com/question/17344599
#SPJ2
In order to survive, plants absorb sunlight, water, and nutrients from the soil. What property is this?
Plants are unique organisms that can absorb nutrients and water through their root system, as well as carbon dioxide from the atmosphere. Soil quality and climate are the major determinants of plant distribution and growth.
PLEASE HELP ASAP!!!
K+ has how many electrons?
-19
-18
-20
-none of these
Answer:
Its 19.
Explanation:
K (potassium) has 19 electron according to the atomic number in the periodic table. The atomic number tells you the number of protons and electrons.
look at the three solid blocks made of the same material and with the exact same dimensions which block has the greatest mass
Answer:
where are the solid blocks?
Explanation:
Why is it beneficial for chemists to understand as many periodic trends as they can?
Answer:
It can help identify elements quicker.
Explanation:
PLEASE HELP ASAP!!!
What is the mass of the element above?
-1
-2
-3
-4
-5
Answer:
its 1 not negative
the atom shown below was hydrogen, known as H.
If an astronomer was to look through a telescope and notice that a star's emitted light had a slightly red tint to it, compared to what the emitted light should be. What would that mean about that star?
Answer:
In the chapters that follow, we will provide the temperature of the stars we are describing, and this section tells you how those temperatures are determined from the colors of light the stars give off. Hubble Space Telescope image of the Sagittarius Star Cloud. The image shows many stars of various colors, white, blue, red and yellow spread over a black background. The most common star colors in this image are red and yellow. Figure 1: Sagittarius Star Cloud. This image, which was taken by the Hubble Space Telescope, shows stars in the direction toward the center of the Milky Way Galaxy. The bright stars glitter like colored jewels on a black velvet background. The color of a star indicates its temperature. Blue-white stars are much hotter than the Sun, whereas red stars are cooler. On average, the stars in this field are at a distance of about 25,000 light-years (which means it takes light 25,000 years to traverse the distance from them to us) and the width of the field is about 13.3 light-years. (credit: Hubble Heritage Team (AURA/STScI/NASA))
Color and Temperature
As we learned in The Electromagnetic Spectrum section, Wien’s law relates stellar color to stellar temperature. Blue colors dominate the visible light output of very hot stars (with much additional radiation in the ultraviolet). On the other hand, cool stars emit most of their visible light energy at red wavelengths (with more radiation coming off in the infrared) (Table 1). The color of a star therefore provides a measure of its intrinsic or true surface temperature (apart from the effects of reddening by interstellar dust, which will be discussed in Between the Stars: Gas and Dust in Space). Color does not depend on the distance to the object. This should be familiar to you from everyday experience. The color of a traffic signal, for example, appears the same no matter how far away it is. If we could somehow take a star, observe it, and then move it much farther away, its apparent brightness (magnitude) would change. But this change in brightness is the same for all wavelengths, and so its color would remain the same. Table 1. Example Star Colors and Corresponding Approximate Temperatures
Star Color Approximate Temperature Example
Blue 25,000 K Spica
White 10,000 K Vega
Yellow 6000 K Sun
Orange 4000 K Aldebaran
Red 3000 K Betelgeuse
Go to this interactive simulation from the University of Colorado to see the color of a star changing as the temperature is changed. The hottest stars have temperatures of over 40,000 K, and the coolest stars have temperatures of about 2000 K. Our Sun’s surface temperature is about 6000 K; its peak wavelength color is a slightly greenish-yellow. In space, the Sun would look white, shining with about equal amounts of reddish and bluish wavelengths of light. It looks somewhat yellow as seen from Earth’s surface because our planet’s nitrogen molecules scatter some of the shorter (i.e., blue) wavelengths out of the beams of sunlight that reach us, leaving more long wavelength light behind. This also explains why the sky is blue: the blue sky is sunlight scattered by Earth’s atmosphere.
Color Indices
In order to specify the exact color of a star, astronomers normally measure a star’s apparent brightness through filters, each of which transmits only the light from a particular narrow band of wavelengths (colors). A crude example of a filter in everyday life is a green-colored, plastic, soft drink bottle, which, when held in front of your eyes, lets only the green colors of light through. One commonly used set of filters in astronomy measures stellar brightness at three wavelengths corresponding to ultraviolet, blue, and yellow light. The filters are named: U (ultraviolet), B (blue), and V (visual, for yellow). These filters transmit light near the wavelengths of 360 nanometers (nm), 420 nm, and 540 nm, respectively. The brightness measured through each filter is usually expressed in magnitudes. The difference between any two of these magnitudes—say, between the blue and the visual magnitudes (B–V)—is called a color index. By agreement among astronomers, the ultraviolet, blue, and visual magnitudes of the UBV system are adjusted to give a color index of 0 to a star with a surface temperature of about 10,000 K, such as Vega. The B–V color indexes of stars range from −0.4 for the bluest stars, with temperatures of about 40,000 K, to +2.0 for the reddest stars, with temperatures of about 2000 K. The B–V index for the Sun is about +0.65. Note that, by convention, the B–V index is always the “bluer” minus the “redder” color. Why use a color index if it ultimately implies temperature? Because the brightness of a star through a filter is what astronomers actually measure, and we are always more comfortable when our statements have to do with measurable quantities.
Explanation:yw :P
A fluoride ion (F) has the same electron configuration as
A. Na+
B.Na
C.Cl-
D.Cl
Answer:
Option A. Na⁺
Explanation:
Floride ion (F¯) simply indicates that the fluorine atom has gain an extra electron.
Thus, the electronic configuration of the fluoride ion (F¯) can be written as follow:
F¯ (10) => 1s² 2s²2p⁶
Next, we shall determine the electronic configuration of the element given in options to see which is the same as that of the fluoride ion (F¯). This is illustrated below:
Na⁺ (10) => 1s² 2s²2p⁶
Na (11) => 1s² 2s²2p⁶ 3s¹
Cl (17) => 1s² 2s²2p⁶ 3s²3p⁵
Cl¯ (18) => 1s² 2s²2p⁶ 3s²3p⁶
From the above illustrations, we can see that the fluoride ion (F¯) has the same electronic configuration as Na⁺.
Each element is made up of electrons and these electrons are filled in different shells. These are the following shells in the electrons:
K shellL shellM shellN shellAccording to the question, the fluoride ion has 10 electrons in its 2 shells, that is 2 in K shell and 8 in L shell.
A similar number of shell and electrons to the fluoride ion is sodium ion ([tex]Na^{+}[/tex])
The [tex]Na^+[/tex]has a total 10 number of electrons, hence the electronic configuration is 2 and 8.
Therefore, the [tex]Na^+[/tex] is the correct option.
For more information, refer to the link:-
https://brainly.com/question/21940070
how many different elements are there in the molecule C8H11NO2?
a. 21
b. 2
c. 4
d.11
Answer:
4
Explanation:
Obsidian is a best fit to which of the following categories?
O Mineral
O Rock
O Mineraloid
O Mineralistic
How many non metals are there in benzoic acid?
Answer:
There are 3 non-metals in benzoic acid.
Explanation:
They are Hydrogen, Oxygen, and Carbon.
Using the image above, match A-G to their appropriate part of the periodic table. (If the image does not show, click on the link above for an alternative way to access the image.)
Question 5 options:
Metals
Period
Group/Family
Noble gases
Halogens
Metalloids
Nonmetals
1.
A
2.
B
3.
C
4.
D
5.
E
6.
F
7.
G
1. A ➡️ Metals
2. B ➡️ Metalloids
3. C ➡️ Non-metals
4. D- Column ➡️ Group/Family
5. E- Row ➡️ Period
6. F ➡️ Halogens
7. G ➡️ Noble gases
Explanation:
The Periodic Table is known to be an array of chemical elements that are organized in order of their increasing atomic number. That arrangement gives a recurring pattern known as the periodic law in their properties.
Periods are found in the horizontal rows (across) the periodic table, while groups are found in the vertical columns (down) the table.
The Periodic Table was discovered by D.I Mendeleev.
the term “ The Universe “refers to ?
Answer:
everything including the space...
hope it helps...
If velocity is positive, which would most likely yield a negative acceleration?
A final velocity that is faster than an initial velocity.
A time that is less than a half hour.
An initial velocity that is faster than a final velocity.
A time that is greater than a half hour.
Answer:
C. An intitial velocity that is faster than a final velocity.
Explanation:
taking the test rn but it makes sense because you'd have to slow down to get a lesser final velocity.
Answer:
C
Explanation:
23. Color of a metter is
Find the isotope nation and the decay particle
Which process is represented by this diagram?
Answer:distillation
Explanation:
The process represented by the diagram is chromatography.
What is chromatography?
Chromatography is a separation technique used to separate components present in a mixture.It makes use of two phases the stationary phase and mobile phase .
Stationary phase is a phase in which the mixture components to be separated is loaded. Mobile phase is a phase which is run over the stationary phase so as to enables components of mixtures to separate.
Separation of components is based on the principle that components of mixture which are soluble in mobile phase travel large distances over stationary phase while those which are insoluble or less soluble travel less distances over stationary phase.
For every component which is separated, a Rf value can be calculated which is simply ratio distance traveled by solute divided by distance traveled by solvent front.
Learn more about chromatography ,here:
https://brainly.com/question/11960023
#SPJ2
why would an atom have zero charge
Answer:
The overall charge of an atom is zero. ... The charge from a proton or electron are of equal strength, therefore if an atom has an equal number of protons and electrons, it will be electrically neutral. However, atoms are not always electrically neutral, in which case they are called ions.
Explanation:
Sorry if it's wrong!!!!
Help
I don't understand
I think that is A and D ?
a patient is prescribed tigan capsules for vomiting. The drug is available in the form of 300.0 mg tigan/capsules ,and is administered in 4.0 doses/day of 1 capsule/dose. How many g Tigan does the patient recieve in 2.0 days?
The patient recieves 2.4 g Tigan in 2 days
Further explanationIn finding the conversion units, we can multiply and eliminate the same units so that we can get the desired quantity or unit.
In this case, it is expected that the number of Tigan is known in 2 days, so we just need to multiply the numbers that are known
[tex]\tt =300\dfrac{mg}{capsules}\times \dfrac{1~capsules}{dose}\times 4.0\dfrac{doses}{day}\times 2.0~days\\\\=300\times 1\times 4.0\times 2.0~mg=2400~mg=\boxed{\bold{2.4~g}}[/tex]
Quick chem question!
I’ll mark BRAINLIEST!!!!! :)
Lewis Dot structure for N2?
PHOTO ABOVE
Is not D I got it wrong
Answer: C
Explanation:
The N2 should have a triple bond because it needs three covalent bonds to fill its outer shell. This means the two atoms need to share three electrons each.
It also serves as a nice illustration of a triple-bonded molecule. For the Lewis structure of N2, there are ten accessible valence electrons. Therefore, option C is correct.
What is lewis structure ?The diagrams known as Lewis structures, often referred to as Lewis dot formulas, Lewis dot structures, electron dot structures, or Lewis electron dot structures, depict the interactions between the atoms in a molecule as well as any lone pairs of electrons that may be present.
It contradicts the octet rule, as shown by the production of molecules, and could not account for the release of energy during the formation of covalent bonds.
The three parallel lines between the N atoms represent three bonds. This is a triple bond, with one electron from each N atom contributing to each bond. A total of 6 electrons are thus represented by this triple bond.
Thus, option C is correct.
To learn more about lewis structure, follow the link;
https://brainly.com/question/4144781
#SPJ2
HELP ASAP
The diagram below shows some subatomic particles.
What is the particle that is labeled with a question mark (?) in the diagram?
Answer:
The Answer Is Quarks
Explanation:
Its mad up of Quarks
i hope this helps
pls make me brilliant or something
The particle that is labeled with a question mark (?) in the diagram is Quarks
Quarks are elementary particles and fundamental constituents of matter. They are considered the smallest known particles that make up protons and neutrons, which are the building blocks of atomic nuclei. Quarks are classified as fermions, which means they follow the rules of quantum mechanics and obey the Pauli exclusion principle.
There are six known types, or flavors, of quarks: up (u), down (d), charm (c), strange (s), top (t), and bottom (b). Each quark flavor has a unique set of properties, including mass, electric charge, and the way they interact with other particles through the strong nuclear force. The up and down quarks are the lightest and most common, while the top quark is the heaviest.
One notable property of quarks is that they possess a fractional electric charge. The up quark has a charge of +2/3 (e/3), while the down quark has a charge of -1/3 (-e/3), where "e" represents the elementary charge carried by an electron. Quarks are never found in isolation due to the confinement principle, which means they are always bound together in composite particles called hadrons.
Quarks interact through the strong nuclear force, which is mediated by particles called gluons. This force binds quarks together to form protons and neutrons, and also governs the interactions within atomic nuclei.
To know more about particle
https://brainly.com/question/13874021
#SPJ4
