Answer:
A. gases only
Explanation:
It is only in gases that the particles are very far apart so they can fill their contains.
There are four major states of matter which solid, liquid, gases and plasma.
Particles of a gas have very weak attractive forces between them. They do not have fixed volume nor shapeThey easily fill up any containers they are put into. Gases are compressible and moves randomly in a straight line. Liquids and solids do not fill up containers. Liquids although have weak forces but they are better attracted than gases. Solids have fixed and definite volume.So, option A is the perfect answer.
What are the purposes of theories in science?
b. What makes a theory a “good theory”?
please help
Answer:
Scientific theories are testable and make falsifiable predictions. They describe the causes of a particular natural phenomenon and are used to explain and predict aspects of the physical universe or specific areas of inquiry (for example, electricity, chemistry, and astronomy).
A good theory in the theoretical sense is (1) consistent with empirical observations; is (2) precise, (3) parsimonious, (4) explanatorily broad, and (5) falsifiable; and (6) promotes scientific progress (among others; Table 1.1).
Read the following excerpt and answer the question:
Scientists often refer to mushrooms as the "dark matter of biology" because we don't know much about them. Mushrooms are not plants
because they have no chlorophyll and cannot make their own food. They are actually fungi and absorb nutrients from their surrounding
environments, and they can even thrive at the bottom of the ocean or in the middle of a desert!
Use your own words to summarize why mushrooms and plants differ in their needs to use radiant energy from the sun.
Answer:
\/
Explanation:
Plants rely directly on the energy from the sun. The chloroplast create glucose from the sun rays through a process known as photosynthesis. Mushrooms, on the other hand, do not have the ability to use the sun's rays to create food, so they instead gather their energy from the nutrients from the soil or decaying things, such as plants, that once used the sun's radiation as sustenance. So basically mushrooms use the radiant energy from the sun indirectly and plants use it directly
List 3 problems that can be solved with magnets
Answer:
- Failed internal wiring
- reaching a hard to get metal item
- keeping a item on a metal surface
Explanation:
Please give me BRAINLIEST :))
On a mountain in the spring, snow melts and flows into a creek. Then the creek flows into a river, which eventually flows into the ocean.
1. Which part of the water cycle is this an example?
2. What forces cases the water to flow drown hill?
Answer:
I'm sorry but I need points
what is a rule for determining the atomic mass of an atom or ion ?
Answer:
Mass = Number of neutrons + Atomic number (aka number of protons)
Explanation:
Plumbers often use a "dielectric union" joint to join pipes of different types. For example, copper pipes in a house might need to be joined with lead pipes in the main water supply. The dielectric union is a plastic joint that will not conduct electricity. Propose an explanation for why a copper pipe can't simply be welded directly to a lead pipe.
Answer:
a copper pipe can't simply be welded directly to a lead pipe because lead has a far lower melting point than copper and thus the lead will melt before the copper can even be effected.
Explanation:
A lead pipe is a pipe that's made of lead and is usually used in distribution of potable water to connect a water main source to a user's preferred area.
Now, a copper pipe can't simply be welded directly to a lead pipe because lead has a far lower melting point than copper and thus the lead will melt before the copper can even be effected.
Lead has a melting point of 327.5° C while copper wire has a melting point of 1082.778 °C
If car has traveled 24 km in 2 hours,what is the average speed
Answer:
The answer is 12 km/hrExplanation:
The average speed can be found by using the formula
[tex]v = \frac{d}{t} \\ [/tex]
where
d is the distance
t is the time taken
So we have
[tex]a = \frac{24}{2} \\ [/tex]
We have the final answer as
12 km/hrHope this helps you
A car travels 100 m while decelerating to 8 m/s in 5 s.
initial speed is 32
b) What was it's acceleration?
A rock is an (blank) of minerals.
I don't get this at all.
Please mark as Brainiest. I would be so happy!!!
Answer:
Minerals - composed of orderly arrangements of atoms. Rocks - are composed of minerals. Crystals - solid materials that have an orderly arrangement of atoms. Gems - are rare and beautiful minerals that often are cut from crystals.
What is the noble gas configuration for Cobalt?
a
[Ar] 4s2 3d7
b
[Ar] 4s2 4d7
c
[Kr] 4s2 4d7
d
[Kr] 4s2 3d7
Answer:
a. [Ar] 4s2 3d7
Explanation:
What is the quickest way to dissolve milk in water? Can milk dissolve in all
solvents? Explain your answer.
It dissolves in hot water because of the water temperature, the milk could not take it to mix in the hot water
Do you know when the transfer of heat/thermal energy has ended
How many elements are present in the compound?
Mg2As3COHNi2
Answer: 6
Explanation: none needed lol
What is the movement of particles in gas?
Answer:
The movement is random
Explanation:
What are the characteristics of metals vs. non metals?
Answer:In the picture
Explanation: None
How is heat transferred when a person steps on hot sand?
O A. From the sand to the feet
O B. In both directions between the sand and the feet
C. From the feet to the sand
O D. Heat is not transferred.
Answer:
Explanation:
Heat moves from hot sand to the bottoms of your feet by conduction. Conduction is the transfer of heat between objects that touch each other.
Heat moves from hot sand to the bottoms of your feet by conduction.Hence Option (A) is correct.
What is Conduction ?Heat conduction is a phenomenon that occurs through the interaction of neighbouring atoms and molecules, transferring their energy/heat (partially) to their neighbours.
This is the most significant means of heat transfer within a solid and between solid objects in thermal contact.
Conduction is the transfer of heat between objects that touch each other.
Therefore, Heat moves from hot sand to the bottoms of your feet by conduction.Hence Option (A) is correct.
Learn more about Conduction here ;
https://brainly.com/question/21753860
#SPJ2
Alveolar air (a mixture of nitrogen, oxygen, and carbon dioxide) has a total pressure of 0.998 atm. If the partial pressure of oxygen gas is 0.198 atm and the partial pressure of nitrogen gas is 0.770 atm, what is the partial pressure of carbon dioxide in millimeters of mercury?
Answer:
The partial pressure of carbon dioxide is 22.8 mmHg
Explanation:
Dalton's Law is a gas law that relates the partial pressures of the gases in a mixture. This law says that the pressure of a gas mixture is equal to the sum of the partial pressures of all the gases present.
In this case:
Ptotal=Pnitrogen + Poxygen + Pcarbondioxide
You know that:
Ptotal= 0.998 atmPnitrogen= 0.770 atmPoxygen= 0.198 atmPcarbondioxide= ?Replacing:
0.998 atm=0.770 atm + 0.198 atm + Pcarbondioxide
Solving:
Pcarbondioxide= 0.998 atm - 0.770 atm - 0.198 atm
Pcarbondioxide= 0.03 atm
Now you apply the following rule of three: if 1 atm equals 760 mmHg, 0.03 atm how many mmHg equals?
[tex]Pcarbondioxide=\frac{0.03 atm*760 mmHg}{1 atm}[/tex]
Pcarbondioxide= 22.8 mmHg
The partial pressure of carbon dioxide is 22.8 mmHg
Take away my first letter and I remain the same. Take away my last letter and I remain unchanged. Remove all my letters and I'm still me. What am I?
Answer:
mail carrier
Explanation:
What should you wear during lab investigations to protect your eyes?
Answer:
goggles
Explanation:
How many O's are in Al2(SO4)3 ?
Answer:
12 moles O
In one mole of aluminum sulfate, Al2(SO4)3 , there are 2 moles Al atoms, 3 moles sulfur atoms, and 12 moles O atoms
Explanation:
Answer:
1...
Explanation:
1. Any atom that is electrically neutral must contain -
Answer:
The same number of electrons and protons.
Explanation:
Because a proton has a charge of +1 and an electron has a charge of -1, the ratio of protons to electrons must be 1:1 for the atom to be neutral.
+
The density of a liquid substance is 0.95 g/mL. Three students calculated the density as 0.56 g/mL. Calculate the percent error.
0 41.05 %
41.0 %
O 41.053%
O 41%
Answer:
The answer is 41.05 %Explanation:
The percentage error of a certain measurement can be found by using the formula
[tex]P(\%) = \frac{error}{actual \: \: number} \times 100\% \\ [/tex]
From the question
actual density = 0.95 g/mL
error = 0.95 - 0.56 = 0.39
So we have
[tex]p(\%) = \frac{0.39}{0.95} \times 100 \\ = 41.0526315...[/tex]
We have the final answer as
41.05 %Hope this helps you
How many grams of calcium nitrate, Ca(NO3)2 (molecular weight 164), contains 24 grams of oxygen atoms?
a
41 g
b
96 g
c
62 g
d
164 g
Glucose is an example of which Carbon-based macromolecule?
proteins
carbohydrates
lipids
nucleic acids
Answer:
Monosaccharides are the most basic units of carbohydrates. These are simple sugars, including glucose, fructose, and others. They contain between three and seven carbon atoms, have a sweet taste and are used by the body for energy.
Metals tend to have low ionization energies. What properties of elements in the metal groups do you think are the result of this tendency?
Answer:
Ionization Energy is defined as the energy required to remove the most loosely bonded atom from an atom in its gas phase. Ionization energy in metals decreases from top to bottom and from right to left and on the periodic table.
Metals have lower ionization energies that help metal atoms to lose electrons to nonmetal atoms easily. The metallic character of a metal increases as ionization energy decreases, it means reactivity of metals increases with decreases in ionization energy.
Hence, the reactivity of metals increases with low ionization energies..
The metals tend to have high reactivity due to low ionization energy.
The ionization energy can be defined as the energy required to remove the atom from metal in its gaseous state. The metals on the left side of the periodic table have loosely bonded electrons, requiring less ionization energy for the removal of an electron. Thus on moving from left to right in a periodic table, the ionization energy increases.
On moving from top to bottom in a periodic table, due to steric hindrance, the electrons are loosely bonded and require less energy for the removal of electrons. Thus on moving down the group, the ionization energy decreases.
The low ionization energy shows that there is easy removal of electrons tends to increase its reactivity.
Thus, low ionization energy results in the high reactivity of metals.
For more information about ionization energy, refer the link:
https://brainly.com/question/16243729?referrer=searchResults
How many joules are needed to melt 50 g of ice at 0°C?
Answer:
You need the Delta H fusion for water. Multiply that by 50 grams. Then multiply 50 g x 4.184 x 65 to get joules to raise water to 65 degrees. Add these values together to get total joules.
Explanation:
describe 2 physical and 2 chemical changes involved in cooking
Please answer quick!!!
Answer: theres alot let me explain...
Explanation:
Protein denaturation is what makes eggs solidify, collagen break down and convert to gelatin in slow-cooked meat, fish and chicken become more opaque, and all meats firm up and change color. This is primarily achieved by applying heat, but can also occur in the presence of acidic and basic ingredients.
The Maillard reaction is the primary effect taking place in “browning”, and produces more flavor compounds, resulting in more complex flavors in food that we generally find enjoyable. It involves reaction between amino acids (proteins) and a certain class of sugars called reducing sugars — mostly the monosaccharides, such as glucose and fructose.
Caramelization is a secondary browning effect that occurs in foods with sugar content, even though all browning is often referred to as “caramelizing”. It mostly takes place at higher temperatures than Maillard reaction (with the notable exception of fructose).
Pyrolysis, or thermal decomposition (chemical breakdown) begins at higher temperatures. While caramelization is technically in this category, the main effect of this reaction is carbonization. This is what we generally mean when we talk about “burning” food, even though no combustion has taken place. It’s also what happens when we cause oil to smoke and darken. In small, controlled amounts, this can still provide desirable flavors, such as char on the outside of meat and contributing to “wok hei” in stir frying — the latter of which does involve some combustion.
Acid-base reactions produce carbon dioxide, which creates the rise in quick breads such as biscuits. These often occur at room temperature, but some also don’t occur until higher temperatures — which is how “double-acting” baking powder works.
Gluten formation occurs when you mix flour and water, resulting in stretchy doughs and fluffy baked goods. This occurs easily at room temperature.
Which of the subatomic particles are responsible for the differences in isotopes?
Protons
Electrons
Atoms
Neutrons
Answer: Neutrons
Explanation:
Isotopes are atoms of the same element that have different numbers of neutrons but the same number of protons and electrons. The difference in the number of neutrons between the various isotopes of an element means that the various isotopes have different masses.
Answer:
neutrons
Explanation:
isotopes has the same proton number but different nucleon number because there's different numbers of neutrons in isotopes
1. Clouds form when water changes from a
A gas to liquid .
B liquid to gas.
C solid to gas
D solid to liquid.
Answer:
A. Gas to liquidExplanation:
I think the answer is A. gas to liquid. This is the correct answer... If you like this answer mark this answer as BRAINLIEST answer..Thank you ☺️☺️
Plz help! The best answer will be marked as brainliest!
Make a funny sentence of alloys for Magnesium
Here is an example for Mercury, it HAS to for Magnesium
“I love to travel but I do corrode aluminum so we won’t be flying off on adventures in airplanes planes anytime soon”
Answer:
Megan trailer said pass the maga mic so I can sing, I'll call the mic magnesium
Explanation:
Get it cuz a mic is made out of magnesium
