Answer:
9.69g
Explanation:
Xmol of n2= 7.774/22.4= 0.346 mole
molar mass of n2 2×14 =28g/Mol
Mas of n2= 0.346×28
Mas of n2=9.69grams
1. Set up a Bunsen burner on a heat-proof mat.
2. Take a small piece of magnesium ribbon and place it in some tongs
3. Hold the tongs at arm's length and place the magnesium ribbon in the Bunsen flame.
4. Once the magnesium is burning DO NOT LOOK DIRECTLY AT THE FAME. Magnesium burns very brightly and the light could harm your eyes.
A1. Describe what has been formed
A2. Name the reactants in this chemical reaction.
A3. List all the safety precautions you need to take while carrying out this experiment
Answer:
MAKE ME BRAINLIEST TOOK TIME!!!!
Explanation:
A1) When magnesium reacts with oxygen, it produces light bright enough to blind you temporarily. Magnesium burns so bright because the reaction releases a lot of heat. As a result of this exothermic reaction, magnesium gives two electrons to oxygen, forming powdery magnesium oxide (MgO).
A2) magnesium oxide
A3) Do not return chemicals to their original packaging. An incompatible mixture may accidentally be formed.
Keep chemical containers closed. Dust and vapour may escape from an open container, while gases and suspended material may penetrate this, causing the nature of the chemical to change. This will also avoid unnecessary exposure.
Never use a wrong or an unmarked reagent. If you are unsure about the compound, do not use it. Instead, have it disposed of (see Disposal of Hazardous Waste).
Never put spatulas, stirrers or other objects into a storage container for chemicals. Remove the contents by pouring and rolling the contents of the glass into a beaker, glass container or other suitable equipment. Spatulas may be used with caution in laboratory reagent containers. Remember the labelling (see the Safety Rules for working in lab).
Once removed from the bottle or glass, cork stoppers must be placed on a clean surface (e.g. a watch glass or other suitable equipment) with the opening facing down. This is to avoid contamination of the compound and unnecessary exposure.
Chemical bottles must not be carried by the neck of the bottle, nor next to your body. Suitable carrying arrangements should be employed, e.g. buckets or trolleys.
When pouring from bottles, the label should always face upward to prevent any spillage from destroying the label.
Never put any chemicals in the bottle other than the one indicated on the label.
Special precautions should be taken when handling concentrated acids. Dilution of acids should be performed by pouring the acid into water and stirring continuously.
Ivana is studying insect life cycles. She placed a male and a female gnat inside a terrarium. The female gnat laid eggs. Ivana observed and recorded all of the stages she saw the eggs go through. Her results are shown in the table below.
Answer:
B. A gnat completes its life cycle in about 1 month.
Explanation:
Stage Time in Stage
egg 24 hours
larva 7 days
pupa 6 days
adult 2 weeks
Which of the following is a valid conclusion that Ivana can draw from her data?
A. Agnat generally does not live for more than 1 week.
B. Agnat completes its life cycle in about 1 month.
C. Agnat life cycle has more than five stages.
D. Agnat is a crustacean, not an insect.
describe how to separate iron fillings, iron (II) chloride crystals and sulphur powder all separately
Answer:
1. Place in a platic bag and use a magnet to attract the iron filings. [See explanation for an alternative step].
2. Disolve the remainer in water
3. Pass the liquid through a microporous filter to capture the undissolved sulfur
4. Evaporate the filtered water to retrieve iron chloride crystals
Explanation:
The Fe(II) chloride will dissolve in water. It is paramagnetic, and thus is weakly attracted to a magnet. The process above should not result in attracting the solid Fe(II) crystals. In fact, it is probably acceptable to dissolve the entire sample in water as the fisrt step. The dissolved Fe(II) chloride should also not be strongly attraced to a magnet, and htis step would allow easier separation of the iron filings.
Sulfur is not soluble in water, so it will collect as a dsolid in the microporous filter.
The Fe(II) has a high solubility, so it will wind up in the filtered soluition. Evaopate using heat or vacuum to retrieve the solid Fe(II) chloride crystals (they will be hydrated).
Sodium hydroxide is soluble as shown by the following reaction: NaOH(s)-> Na +(aq) + OH-(aq). What is the pOH of a 3.0x10^-3 NaOH solution?
Sodium hydroxide is a soluble strong base. The pOH of a 3.0 × 10⁻³ M-sodium hydroxide solution is 2.5.
What is a base?According to Arrhenius, a base is a species that releases OH⁻ ions in an aqueous medium.
Let's consider the basic reaction of NaOH.
NaOH(s) ⇒ Na⁺(aq) + OH⁻(aq)
NaOH is a strong base. This means that the concentration of OH⁻ will be equal to the initial concentration of NaOH, i.e. 3.0 × 10⁻³ M.
Then, we can calculate the pOH of the NaOH solution using the following expression.
pOH = -log [OH⁻] = -log 3.0 × 10⁻³ = 2.5
Sodium hydroxide is a soluble strong base. The pOH of a 3.0 × 10⁻³ M-sodium hydroxide solution is 2.5.
Learn more about strong bases here: https://brainly.com/question/15192126
Answer:2.5
Explanation:
what are the products for the following equation?
LiBr + F ->
[tex]\qquad\qquad\huge\underline{{\sf Answer}}♨[/tex]
Here's the balanced chemical equation for above reaction ~
[tex]\qquad \sf \:LiBr + F \rightarrow Li F + Br[/tex]
Here, fluorine is more more more reactive than Bromine, therefore it replaces Bromine from its compound and forms Lithium floride.
The microscopes used today are just like the ones used by Leeuwenhoek and Hooke. True or false
Answer:
False
Explanation:
While we do know that A. Leeuwenhoek used a simple microscope that consisted of only 1 lens, Hooke used a compound microscope. Although, after trying a compound microscope, Hooke found out that it strained his eyes and continued to use a simple microscope for his Micrographia.
Thus, we can say that the (compound) microscopes used today are different than the (simple) microscope used by Hooke and Leeuwenhoek.
what are the basic elements of environment
Answer:
the basic elements of environment are lithosphere, hydrosphere, atmosphere and biosphere.
Explanation:
If you dissolve 8 grams NaOH in 0.1L of water what is the molarity of NaOH is solution? how many miles per liter do you have
Answer:
2 mol/L
Explanation:
molarity = moles/litres
NaOH = 23 + 16 + 1 = 40 g/mol
[tex] ? \: mol \: naoh \: = 8 \: g \: naoh \: \times \\ \frac{1 \: mol \: naoh}{40 \: g \: naoh} = 0.2 \: mol \: naoh[/tex]
molarity = 0.2 mol/0.1 L = 2 mol/L
Methane (CH4), is said to be the cleanest burning fossil fuel. When burned, it releases carbon dioxide gas and forms water. Using the equation below, determine which of the following is true (assuming there is an infinite supply of oxygen gas (O2)). Select all that apply.
For every 1 molecule of methane CH4 that reacts, 2 molecules of H2O are produced.
For every 2 moles of methane (CH4) that reacts, 2 moles of H2O are produced.
For every 2,000 molecules of methane (CH4) that reacts, 2,000 molecules of H2O are produced.
For every 20 grams of methane (CH4) that reacts, 40 grams of H2O are produced.
For every 200 moles of methane (CH4) that reacts, 400 moles of H2O are produced.
From the stoichiometry of the balanced reaction equation, the correct statement are;
For every 1 molecule of methane CH4 that reacts, 2 molecules of H2O are produced.For every 20 grams of methane (CH4) that reacts, 40 grams of H2O are produced.For every 200 moles of methane (CH4) that reacts, 400 moles of H2O are produced.What is combustion?The term combustion refers to the burning of fossil fuels for the purpose of energy production. The equation for reaction is CH4 + 2O2 ---> CO2 + 2H2O.
Using this equation as shown, the true statements are;
For every 1 molecule of methane CH4 that reacts, 2 molecules of H2O are produced.For every 20 grams of methane (CH4) that reacts, 40 grams of H2O are produced.For every 200 moles of methane (CH4) that reacts, 400 moles of H2O are produced.Learn more about combustion: https://brainly.com/question/15117038
what is the purpose of the lab ? PLSSS HELPPPPP
Answer:
To keep apparatus, chemicals and carry out experiments
Joseph divides 8.64 by 2.0. How many significant figures should his answer have?
Answer:
2 significant figures
Good luck with your work! :)
what factors determine the amount of radiant energy we will receive on earth?
Need help with Chem.
You are a NASA engineer. You are the chief engineer for the Apollo 13 mission to the moon. The astronauts are running out of oxygen and need to get rid of the excess carbon dioxide. You know that sodium hydroxide (NaOH) has been suggested as a means of removing carbon dioxide from the spacecraft cabin. The filter which they had been using is fully saturated and no longer works. You remember that the astronauts have a 5000. g container of sodium hydroxide on the ship. You also know that sodium hydroxide can be used to remove carbon dioxide.
Use the following reaction: NaOH + CO2 → Na2CO3 + H2O
The astronauts have 2 days left before they land on Earth. You know that there are three astronauts, and each astronaut emits roughly 500. g Of carbon dioxide each day. Is there enough sodium hydroxide in the cabin to cleanse the cabin air of the carbon dioxide, or are the astronauts doomed? SHOW ALL YOUR WORK - DON’T FORGET TO BALANCE THE EQUATION
Guiding Questions: How many grams of CO2 are produced in a day? How many grams of CO2 are produced in both days? How many grams of NaOH do you need to get rid of 3000 g of CO2?
Answer:
We know that there are three astronauts and each one of them emits 500 grams of carbon dioxide each day, so the total carbon dioxide emitted each day.
Explanation:
From the mole ratio of the reaction, there is not enough sodium hydroxide in the cabin to cleanse the cabin air of the carbon
What was of Sodium hydroxide is required?The mass of sodium hydroxide required depends on the mass of CO2 produced by the astronauts.
The mass of CO2 produced by the astronauts is calculated as follows;
Mass of CO2 produced = 3 × 2 × 500 g = 3000 g of CO2
The mass of sodium hydroxide required is calculatedfrom the eqaution of the reaction given below:
[tex]2NaOH + CO_2 → Na_2CO_3 + H_2O \\ [/tex]2 moles of sodium hydroxide reacts with 1 mole of CO2
Molar mass of NaOH = 40 g/mol
Molar mass of CO2 = 44 g/mol
Mass of sodium hydroxide required = 3000 g × 2 × 40/44 = 5454.54 g
Therefore, there is not enough sodium hydroxide in the cabin to cleanse the cabin air of the carbon.
Learn more about mass and moles at: https://brainly.com/question/15374113
What happens when a dendritic cell detects a pathogen?
the dendritic cell will cause agglutination of the pathogen cells
the dendritic cell consumes the pathogen by phagocytosis...
the dendritic cell secretes antibodies
the dendritic cell will produce immunoglobin
Answer:
the dendritic cell consumes the pathogen by phagocytosis
mtDNA is individual evidence.
True
False
Answer:
the correct answer false
Explanation:
The strongest forces of attraction occur between molecules of
Answer:
Dipole-dipole
- are the strongest intermolecular force of attraction.
Explanation:
Yun lang <3
Calculate the poh of this solution. round to the nearest hundredth. ph = 1.90 poh =
Answer:
10.25
Explanation:
There I proved it
Answer:
pOH = 12.10
Explanation:
pOH = 14 - pH = 14 - 1.90 = 12.10
1. How is the genome like a stack of papers?
Answer:
Except for mature red blood cells, all human cells contain a complete genome. DNA in the human genome is arranged into 24 distinct chromosomes—physically separate molecules that range in length from about 50 mil- lion to 250 million base pairs.
Answer:
As represented by this huge stack of paper, the human genome contains more than three billion nucleotides or DNA "letters.".
Explanation:
.
Consider the balanced equation below.
2H2S + 3O2 Right arrow. 2SO2 + 2H2O
Which option gives the correct mole ratios?
H2S:SO2 = 2:2 and O2:H2O = 3:2
H2S:SO2 = 2:3 and O2:H2O = 3:2
H2S:SO2 = 4:4 and O2:H2O = 5:4
H2S:SO2 = 4:6 and O2:H2O = 4:4
Answer:
4:6 and 4:4
Explanation:
double the right side so double the left side to get these ratios
HELPPPPPPPPP!!!!....... Which statement best describes how chemical equations demonstrate conservation of mass?
A.
The number of reactants is the same as the number of products.
B.
The compounds are the same on each side of the reaction.
C.
The number of atoms of each element is the same on each side of the equation.
D.
The state of matter is the same on each side of the equation.Which details from the passage are emphasized in both the text and images?
Answer:
A. The mass of reactants is the same as the mass of products
Explain the following a. the mole of a substance. b.a standard solution
a. the mole of substance
b.a standard solution
in analytical chemistry standard solution is a solution containing a precisely known concentration of an element or a substance.
A known mass of solute is dissolved to make a specific volume. it is prepared using a standard solution,such as a primary standard.
hope this helps you
what is the advantege of relase energy in a chemica reaction
Answer:
A chemical reaction can release chemical energy stored in batteries, natural gas, and even coal. The main advantage of chemical energy is that it is abundant in nature. Chemical energy can be produced by many organic materials.
Hope this helps!!!!!!
Mark Brainleast!!!!!!!!!!!!
Identify any three ways of conserving and managing forest in nepal.
Answer:
We should manage and conserve forest resources in Nepal.
Explanation:
Nepal is the second richest country in natural resources. We should all work together and conserve our natural resources. We can conserve and manage forests in Nepal by the following ways:
1. Proper rules and laws should be made as well as executed by our government.
2. Illegal activities regarding harm of forests and its resources should be totally band.
3. Awareness programmes should be conducted worldwide to aware our citizens regarding conservation of forests.
Guys helllpppppppppppppppppppppppppp
a solution with a pH of 4.6 is a:
forty miles above the earth's surface the temperature is 250k and the pressure is only 0.20 torr. what is the density of air at this altitude? (assume the molar mass of air is 28.96 g/mol)
i got that D=3.71*10^-4 is this right?
For a Forty miles above the earth's surface, the temperature at 250k and the pressure at only 0.20 torr, the density of air at this altitude is mathematically given as
d=3.732*10{-4}g/l
Generally, the equation for the ideal gas is mathematically given as
PV=(m/mw)RT
Therefore
d=m/v
d=26,664*20/83.14*250
d=0.37152
d=3.732*10{-4}g/l
In conclusion, the density
d=3.732*10{-4}g/l
Read more about Temperature
https://brainly.com/question/13439286
In terms of drug development, rank the following microbes from most difficult (1) to least difficult (3):
Answer:
See below ↓↓↓
Explanation:
Helminths = 1 Most Difficult
Fungi = 2 Moderately Difficult [Option not given, but 2 is right answer]
Bacteria = 3 Least Difficult
How many moles of silver oxide (l) are needed to produce 4 moles of silver?
The number of moles of silver oxide (I) needed to produce 4 moles of silver is 2 moles
StoichiometryFrom the question, we are to determine the number of moles of silver oxide (I) needed to produce 4 moles of silver
First, we will write the balaced chemical equation for the decomposition of silver oxide (I)
2Ag₂O(s) → 4Ag(s) + O₂(g)
This means, 2 moles of silver oxide (I) [Ag₂O] decomposes to give 4 moles of silver and 1 mole of oxygen gas.
From the balanced chemical equation, it is easy to deduce the number of moles of silver oxide (I) that would give 4 moles of silver.
Hence, the number of moles of silver oxide (I) needed to produce 4 moles of silver is 2 moles
Learn more on Stoichiometry here: https://brainly.com/question/18834543
two ways a community can protect the water supply.
Answer:
Keep the tap closed when not using it, and to not use it every day, like washing a car, you can clean it with a sponge and a bucket of water.
Explanation:
I don't know if this helps though.
