Explanation:
1a) CaCO₃(s) → Ca²⁺(aq) + CO₃²⁻(aq)
1b) Remember, solids are not included in the equilibrium equation.
K = [Ca²⁺] [CO₃²⁻]
1c) Adding CO₃²⁻ ions will shift the reaction to the left, producing CaCO₃(s) until equilibrium is restored.
2) 2 SO₂(g) + O₂(g) → 2 SO₃(g)
Kc = 2.5×10¹⁰ = [SO₃]² / ([SO₂]² [O₂])
2a) SO₂(g) + ½ O₂(g) → SO₃(g)
Kc = [SO₃] / ([SO₂] [O₂]^½)
Kc² = [SO₃]² / ([SO₂]² [O₂])
Kc² = 2.5×10¹⁰
Kc ≈ 1.58×10⁵
2b) SO₃(g) → SO₂(g) + ½ O₂(g)
Kc = [SO₂] [O₂]^½ / [SO₃]
Kc = 1 / (1.58×10⁵)
Kc ≈ 6.33×10⁻⁶
2c) 3 SO₂(g) + ³/₂ O₂(g) → 3 SO₃(g)
Kc = [SO₃]³ / ([SO₂]³ [O₂]^³/₂)
Kc = ([SO₃] / ([SO₂] [O₂]^½))³
Kc = (1.58×10⁵)³
Kc ≈ 3.95×10¹⁵
3) H₂(g) + I₂(g) → 2 HI(g)
K = [HI]² / ([H₂] [I₂])
Make an ICE table.
[tex]\left[\begin{array}{cccc}&Initial&Change&Equilibrium\\H_{2}&0.400&-0.240&0.160\\I_{2}&1.60&-0.240&1.360\\HI&0&+0.480&0.480\end{array}\right][/tex]
K = (0.480)² / (0.160 × 1.360)
K = 1.06
A fireworks designer is planning a red-, white-, and blue-themed finale for her fireworks display. She is also planning a fountain effect. Describe the chemicals she will need and how each will produce the desired effect.
Answer:
strontium salts, lithium salts, lithium carbonate, Li2 CO3 = red, whitehot metal, such as magnesium or aluminum, barium oxide, BaO = white, copper compounds + chlorine producer, copper acetoarsenite (Paris Green), Cu3 As2 O3 Cu(C2 H3 O2 )2 = blue. We will need a metal chemical, so that when it is heated it will produce the incandescent to make the fountain effect.
Explanation:
^^
What is the independent variable?
Answer:
An independent variable is defines as the variable that is changed or controlled in a scientific experiment. It represents the cause or reason for an outcome. Independent variables are the variables that the experimenter changes to test their dependent variable.
Explanation:
:)
Heres some defs- a variable (often denoted by x ) whose variation does not depend on that of another. The independent variable is the variable the experimenter changes or controls and is assumed to have a direct effect on the dependent variable. ... The dependent variable is the variable being tested and measured in an experiment, and is 'dependent' on the independent variable.
what is the next step if a scientist's hypothesis is supported
You have 100. grams of potassium bromide (KBr). How many moles do you have? (1 mole KBr = 119 g KBr)
0.840 mole KBr
1.00 mole KBr
1.19 mole KBr
2.00 mole KBr
Answer:
0.840
Explanation:
The 100 grams of KBr have been equivalent to 0.84 moles. Thus, option A is correct.
The moles can be defined as the mass of the compound with respect to the molecular mass. The moles can be given as:
Moles = [tex]\rm \dfrac{weight}{Molecular\;weight}[/tex]
The molecular weight has been the mass of the constituents of the atoms present in the compound.
The compound KBr has a molecular mass of 119 g/mol.
The given mass of the compound has been 100 grams.
The moles of KBr can be given as:
Moles of KBr = [tex]\rm \dfrac{100}{119}[/tex]
Moles of KBr = 0.84 moles.
The 100 grams of KBr have been equivalent to 0.84 moles. Thus, option A is correct.
For more information about the moles, refer to the link:
https://brainly.com/question/2437143
A rectangular metal is 25 dm long, 525 mm wide, and 1.5 m high. This metal weighs 250 lb. Calculate its density in g /mL
Answer:
d = 0.057 g/mL
Explanation:
Given that,
The dimensions of a rectangular metal is 25 dm long, 525 mm wide, and 1.5 m high.
The weight of the metal is 250 lb
We need to find the density of the metal in g/mL.
1 lb = 453.592 g
250 lb = 113398 g
Volume of the block,
V = 25 dm× 525 mm×1.5 m
Since, 1 dm = 0.1 m, 1mm = 0.001 m
V = 2.5 m× 0.525 m× 1.5 m
V = 1.9668 m³
Also, 1 m³ = 1968000 mL
So,
density = mass/volume
density = 113398 g/1968000 mL
= 0.057 g/mL
So, the density of a rectangular metal is 0.057 g/mL.
Which is the correct name for the compound CoCO 3?
A
Cobalt Carbonoxide
B
Cobalt (II) Carbonate
C
Carbon Oxygen Carbonate
D
Cobalt Carbonate
QUICK PLEASE!!!
Answer:
Cobalt (II) Carbonate
Explanation:
Answer:B
Explanation:
What is the volume of a substance that has a mass of 20 g and a density
of 4.0 g/ml?
Answer:
The answer is 5 mLExplanation:
The volume of a substance when given the density and mass can be found by using the formula
[tex]volume = \frac{mass}{density} \\ [/tex]
So we have
[tex]volume = \frac{20}{4} \\ [/tex]
We have the final answer as
5 mLHope this helps you
Harry and Ron are arguing over which broom has better acceleration, the Nimbus 2000 or the Firebolt. The boys are going to race the two brooms from the ground to the top of the goals. Then they will switch brooms and replicate their trials.
Test (independent) Variable: _____________________________________________________________
Result (dependent) Variable: _____________________________________________________________
Control Variables: _____________________________________________________________________
Define Replicate: _____________________________________________________________________
Answer:
Independent variable: BROOM
Dependent variable: ACCELERATION
Control variable: same distance
Find the definition of replicate below
Explanation:
In an experiment, the independent variable is the variable that is changed or manipulated by the experimenter. In this case, the independent variable is the BROOM.
The dependent variable is the variable that is measured in an experiment. It is the variable that responds to the independent variable. The ACCELERATION is the dependent variable in this case.
The control variable is the variable that is kept constant or unchanged throughout the experiment. In this case, the control variable is the SAME DISTANCE traveled for each broom.
A replicate is a repeated experiment with the expectance of a similar or consistent result. In this case, if the brooms are switched, the acceleration of each broom should be the same in the replicate result.
How can you use the periodic table to predict reactivity?
Giving Brainliest!!!
Answer:
hi
Explanation:
how r u today
Which of these would MOST LIKELY cause an increase in the price of an item?
A)
declining popularity of the item
Eliminate
B)
a decrease in the price of a substitute product
improved technology in the production of that item
D)
an increase in the cost of raw materials for that item
Answer: D
Explanation:
It is the most likely one
Explanation:
sorry if you get it wrong but I think its b
All living things must maintain stable body conditions (homeostasis).
A. True
B. False
Write out a balanced, molecular equation, total ionic equation, and net ionic equation for each:
1. Mg(NO3)2(aq) + Na2CO3(aq) -->
2. AgNO3(aq) + KCl(aq) -->
3. Al(s) + HCl(aq) -->
4. HNO3(aq) + Na2CO3aq) -->
Answer:
1:MgCO3 (s) + 2 NaNO3
2:agcl(s)+kno3(aq)
3:alcl3(aq)+h2(g)
4:NaNO3 + CO2 + H2O
(not sure abt last one)
Explain the purpose of the Parados and summarize the text. In addition, infer how the Parados reveals tone and evokes mood. Finally, analyze how the text reveals the beliefs of the ancient Greek people.
Answer:
The purpose of the Parados is to add an explanation of events that happened before the play begins. In the first section the mood is triumphant because of the recent battle win. Then it jumps back to the beginning of the battle and the mood is scared. Before the army lead by the brother of the king could attack they are forced to retreat and the army counterattacks. Unfortunately, the brothers kill each other during the battle. The people of Ancient Greece believed that Zeus and Ares were on their side and used the gods as the excuse for winning a battle. The story ends victorious but sad tone because the two brothers have slain each other.
Explanation: Gets you 100%
What is The tough and water-resistant layer of the skin where cells are filled with keratin.
what is the ion name of Zinc?
Answer:PubChem CID: 32051
Explanation:Molecular Formula: Zn+2
Synonyms:
zinc ion
zinc(2+)
Zinc cation
Zinc, ion (Zn2+)
Zn2+
More...
Molecular Weight:
65.4 g/mol
Dates:
Modify:
2020-10-20
Create:
2005-06-08
what is the formula for titanium (IV) sulfate
A student trying to determine if a liquid was a mixture or a pure substance made several following observations. Which observation would best support the conclusion that the liquid was a mixture?
Answer:
Distillation
Explanation:
By using the method of distillation we'll identify if there is other properties of liquid by looking the temperatures,the ordor or the boiling point.
Which element is most likely to form a negative 2 ion? a Oxygen b Magnesium c Beryllium d Nitrogen
Answer:
a
Explanation:
A container of hydrogen at 172 kPa was decreased to 85.0 kPa producing a new volume of 3L. What was the original volume?
Answer:
The answer is 1.48 LExplanation:
In order to find the original volume we use the same for Boyle's law which is
[tex]P_1V_1 = P_2V_2[/tex]
where
P1 is the initial pressure
P2 is the final pressure
V1 is the initial volume
V2 is the final volume
Since we are finding the original volume
[tex]V_1 = \frac{P_2V_2}{P_1} \\[/tex]
From the question
P1 = 172 kPa = 172000 Pa
P2 = 85 kPa = 85000 Pa
V2 = 3 L
We have
[tex]V_1 = \frac{85000 \times 3}{172000} = \frac{255000}{172000} = \frac{255}{172} \\ = 1.482558139...[/tex]
We have the final answer as
1.48 LHope this helps you
How many grams are 4.78x10*21 atoms of aluminum?
a sample can not be broken down physically or chemically what is it
Answer:
Pure Substance. A sample of matter, either a single element or a single compound, that has definite chemical and physical properties. Element. A pure substance that cannot be broken down into other substances by chemical or physical means.
Explanation:
Sorry if it's wrong!!!!!!!
Answer:
Elements
Explanation:
Elements cannot be broken down into anything simpler physically or chemically. Compounds: are pure substances that are made up of more than l type of atom and can be broken down or decomposed into its individual elements by chemical methods, but cannot be separated by physical methods.
helpppp in a chemical equation, in which direction does the "yields" arrow point, and what factor does it indicate?
It points to the left, toward the reactants.
It points to the left, toward the products.
It points to the right, toward the reactants.
It points to the right, toward the products.
Answer:
It points right, towards the reactants
Explanation:
In a chemical equation, the arrow indicating the yield is to the right towards the arrow. The reactants are written in the left side and the product are written in the right side.
What is a chemical equation?A chemical equation represents the reaction between two or more elements or compound. The reaction describes the chemical combination between atoms.
A general chemical equation representing a chemical reaction is written below:
A + B ⇒ C.
Here, A and B are reactants and C be the product.
The yield of a reaction is the amount of product obtained. The theoretical yield might differ from the actual yield. Therefore, the arrow of a reaction points to the right towards products.
Find more on chemical equation:
https://brainly.com/question/30087623
#SPJ2
3. Calculate the volume of a of .750 M solution containing 67.0 g of KNO3.
Answer : The volume of solution is 0.884 L
Explanation :
Molarity : It is defined as the number of moles of solute present in one litre of solution.
Formula used :
[tex]Molarity=\frac{\text{Mass of solute}}{\text{Molar mass of solute}\times \text{Volume of solution}}[/tex]
Solute is, [tex]KNO_3[/tex]
Given:
Molarity = 0.750 M
Molar mass of [tex]KNO_3[/tex] = 101 g/mole
Mass of [tex]KNO_3[/tex] = 67.0 g
Now put all the given values in the above formula, we get:
[tex]0.750M=\frac{67.0g}{101g/mole\times \text{Volume of solution}}[/tex]
[tex]\text{Volume of solution}=0.884L[/tex]
Therefore, the volume of solution is 0.884 L
Define matrer?
a)Electrical conductivity
b)Anything that takes Iness and space
c) Something that doesn't take up space.
Answer:
if you are asking matter then
Explanation:
Matter is defined as anything that has mass and takes up space (it has volume).
convert each into decimal form.
a) 1.56× 10^3
b) 0.56×10-4
Answer: A = 1560
B = 1.6
Explanation: brainlest please
The measurement 0.003095 gram, rounded to three significant figures, is
expressed as
0.00310
0.00309
0.003
0.003096
Answer:
0.00310
Explanation:
Which of the following is a type of chemical reaction that releases energy from the bonds of a substance to form one or more new substances
Answer: any options like a or b
Explanation:
 what is 19.8-17.1
Answer: it should be 2.8
Explanation:
a object in a fluid will sink if the
help plz
Answer:
D.
Explanation:
Because if an object is more dense than water it will sink.
What are differences between Jupiter and Saturn’s moons
Answer: Well one difference is that Jupiter's moons are large and are closer to each other. Also Jupiter has more moons than Saturn.
Explanation:
Answer:
The difference are :
jupiter moon saturn moon
1.jupitor moon has 4 1.saturn moon
moon has 7 moon
