Which sentence best describes what happens during a change of state from a solid to a liquid?

A. The temperature stays the same and the particle speed increases

B. The temperature increases and the particle speed stays constant.

C. The temperature decreases and the particle speed decreases.

D. The temperature stays the same and the particle speed stays constant.​

Answers

Answer 1

Answer:

The temperature stays the same and the particle speed stays constant


Related Questions

A sealed flask initially contains pure nitrogen dioxide gas (NO,). Over time, the nitrogen dioxide forms dinitrogen tetroxide gas (N,O.). The graph below shows the relative amounts of (NO,) and (N20.) over time. What is true about the time indicated by the blue arrow?

Answers

This problem is providing information about the equilibrium reaction whereby nitrogen dioxide gas produced dinitrogen tetroxide gas as shown on the attached picture and the following chemical equation:

NO₂ (g)  ⇄ N₂O₄ (g)

In such a way, we can consider the given choices to reason the following:  the blue arrow is pointing out the arrival to the equilibrium condition for the reaction, a point in which the rate of the forward reaction (formation of N₂O₄) is equal to the rate of the reverse reaction (formation of NO₂), because the molecules will fluctuate to the same relative amounts defined by the equilibrium constant.

Therefore the answer will be the first one on the attached file, which can vary on your online homework format.

It is important to note that the reactant is not used up at any point of the graph (concentration drops to 0) and also, the activation energy cannot be analyzed with this sparse information.

Learn more:

(equilibrium concentrations) https://brainly.com/question/7949757

what is the difference between hypertonic and hypotonic

Answers

Answer: A solution will be hypertonic to a cell if its solute concentration is higher than that inside the cell, and the solutes cannot cross the membrane. If a cell is placed in a hypotonic solution, there will be a net flow of water into the cell, and the cell will gain volume.

Picture:
Meaning of hypertonic: (1): having a higher osmotic pressure than a particular fluid, typically a body fluid or intracellular fluid. (2) of or in a state of abnormally high muscle tone.

How do you break down an element?

Answers

Answer:

elements cannot be break down

Please help me with this three questions

Answers

Answer:

1. A. Thyroid Gland Function

B. detecting Blood Clots

C. Treating Cancer

2. An example would be how many are used as tracers for diagnostic purposes

3. Beneficial because it gives us ways to eleminate pests, by the sterile insect technique

Number three is kinda iffy a bit difficult to explain it may be explained better in your book.

Help. 50 points. Need honest answers.

Answers

Answer:

ok

Explanation:

How to get your crush to like you back

Answers

Make sure there’s “chemistry” between you two
answer:
i’m just going to say this…
if people stop talking to you, or seeing you it’s for a reason. things don’t happen on accident, so if your crush stopped liking you then it was for a reason wether you realize it or not.
hope this helps!

what makes matter change from one state to another?

Answers

Answer: Adding or removing energy from matter

Explanation:

For the balanced equation shown below, how many grams of CO2 will be
produced from 74.23 grams of CO? CO + Fe3O4 → 3FeO + CO2

Answers

Answer:

116.64 g

Explanation:

74.23÷14 This is # of moles .

# of moles for co = 5.302

Then mass of co2 = 116.64

URGENT PLEASE HELP
What most likely happens when a sodium atom comes near an atom having seven valence electrons?

Answers

Answer:

7 Electrons

Explanation:

What it is fill its valence shell, it would need to acquire 7 electrons - a difficult task for a metal like sodium that is a known electron-loser. So unlike fluorine and oxygen, sodium acquires a full octet by losing electrons and emptying out its outermost shell.

giving brainly if correct and explained​

Answers

Answer:

D.

Explanation:

A concentrated solution is one that has a lot of solute (the substance being dissolved) in the solvent (the substance doing the dissolving). When a solution is concentrated, it means it has a high ratio of solute to solvent, so the answer is D.

Hope this helps.

A force is a push or a pull under the right circumstances anything can exert a force push a notebook or some other object so that it slides across a table or desktop what force causes the notebook to start moving what force causes the notebook to stop moving?

Answers

Answer:

the force that you applied caused the notebook to move.the force applied on the notebook by the table causes it to stop moving. this is because after sometime the book uses up the force and later the force you applied is less than that of the force by the table.

What is the molarity of a 75.0 mL solution that contains 0.225 g of
potassium nitrate?

Answers

Answer:

M=0.0297M

Explanation:

we know that molarity equals number of mole of solute over the volume of solution.

M=n/V but n=m/M

n=0.225g÷101g/mol =0.00223mol

M=0.00223mol/0.075l

M=0.0297M

Answer:

0.0297M

Explanation:

We will use the formula M= moles of solute/lites of solution.

First we need to figure out the Moles of the solute, to get this we first need the molar mass of KNO3 (potassimum nitrate).

The Molar Mass of potassimum nitrate is 101.103 g/mol
K - 1 x 39.09
N - 1 x 14.006
O - 3 x 15.999
KNO3 - 101.103 g/mol

Now we get the moles of the solute by doing.
0225g/ 101.103g/mol = 0.00223 mol

Put the answer into the orginal equation to get 0.00223mol / 0.045 L
Which equals to 0.0297M. This is also the correct amount of significant figures.

during hybridization ______.

A) nature selects which organisms will survive and reproduce.
B) the nucleus of a cell is removed.
C) two organisms with desired traits are bred.
D) a single beneficial trait is bred into a species.​

Answers

Answer:

option C two organisms with desired traits are bred

calculate the molarity of a 50.0 ml of a 0.150 m hcl solution when 30.0 ml of water is added.

Answers

Answer:

0.09375 M

Explanation:

You want to use the following equation:

M1*V1=M2*V2

Then plug in the 50ml to V1 and 0.15M to M1 and 80ml to V2 (add the 50 and 30). The next thing you want to do is change the mL to liters, since Molarity is moles/liter. Once that is done, solve algebraically for answer.

** Also don't forget to capitalize the M when you mean Molarity, because it is different than m.**

Hope this helps!

Elements are usually dull, brittle and do not conduct electricity are know as_____.

Points: 46

Answers

Answer:

nonmetals. it's one of them

Why are metals sometimes added to gold?

to make it softer and more malleable
to improve the value of gold
to raise its melting point
to make gold stronger and more durable

Answers

To make it softer and more malleable

why is xenon monatomic but bromine is diatomic

Answers

B 3-4 is the auto
If it’s needs

A chemist heats a gas within a sealed, rigid container. Which statement describes the changes that occur in the gas? (1 point)
-The gas particles move slower and hit the sides of the container with less force, consequently, the pressure
increases
-The gas particles move slower and hit the sides of the container with less force, consequently, the pressure decreases
-The gas particles move faster and hit the sides of the container with more force, consequently, the pressure
increases
-The gas particles move faster and hit the sides of the container with more force, consequently, the pressure
decreases

Answers

When a gas is heated in a sealed container, the gas particles move faster and hit the sides of the container with more force leading to an increase in the pressure of the gas.

An increase in the temperature of a gas increases the collision rate of the molecules of the gas according to the kinetic theory.

With increased kinetic energy, the molecules of the gases collide more frequently with each other and the walls of the container.

The collision creates an increase in the magnitude of pressure inside the container.

More on the kinetic theory of gases can be found here: https://brainly.com/question/15354399?referrer=searchResults

Answer:

C

Explanation:

When a gas is heated in a sealed container, the gas particles move faster and hit the sides of the container with more force leading to an increase in the pressure of the gas.

Note the mass of copper(1) oxide formula unit 143.091 what is the mass of 8.250 moles of Cu2O

Answers

Answer:

The mass of 8.250 moles of Cu2O is 1180.5g

Explanation:

HOW TO CALCULATE MASS OF A SUBSTANCE:

The mass of a substance can be calculated by multiplying the number of moles in the substance by its molar mass as follows:

Mass (g) = no. of moles (mol) × molar mass (g/mol)

Molar mass of copper (I) oxide (Cu2O) = 63.5(2) + 16 = 143.09 g/mol

Mass of Cu2O = 8.250 mol × 143.09 g/mol

Mass of Cu2O = 1180.5 g

Therefore, the mass of 8.250 moles of Cu2O is 1180.5 g.

Based on the graph, what is the approximate half-life of the reaction shown below

Answers

Answer: 2.1 minutes

Explanation: Based on the graph, what is the approximate half-life of the reaction shown below

application of electroplating​

Answers

Answer:

are you interested in tun

pls answer this it's due today​

Answers

Answer:

That's pretty easy,if you have a grasp of Elements, Compounds and their Symbols ans Molecular formula.

So, Let's get started!

Our reactions are as follows:

Sodium(Na) + Chlorine(Cl) ---> Sodium chloride(NaCl)

Think of a compound that has both Sodium and Chlorine and is very common.

Common salt — Sodium chloride!

Yeah, that's it! It has both Sodium and Chlorine in it's molecular formula. (NaCl)

Magnesium(Mg) + Oxygen(O2) ---> Magnesium oxide(MgO)

Now, we have to, somehow, get Magnesium oxide using Oxygen. The best way is: by reacting Magnesium with Oxygen.

Iron(Fe) + Sulfur(S) ---> Iron Sulfide(FeS)

Now, we have to get two reactants that react to form Iron Sulfide.

FeS contains only two elements in its formula and that are: Iron(Fe) and Sulfur(S).

So, the best way would be to react Iron(Fe) and Sulfur(S) and get Iron Sulfide (FeS)

Hydrogen(H2) + Oxygen(O2) ---> water(H2O)

You must know that water is H2O, that is, a compound of Hydrogen and Oxygen, the easiest way to get H2O as your product would be : by reacting Oxygen and Hydrogen.

a) sodium chloride (NaCl)
b) magnesium (Mg)
c) Iron (Fe) + Sulfur (S)
d) oxygen (O2)

What type of mixture is throughly mixing powdered lemonade with water

Answers

Answer:

I believe it would be a solution I could be wrong tho

Explanation:

Answer:

a solution

Homogeneous mixtures (solutions)

Explanation:

Lemonade is a special type of mixture called a solution.

...................................................................................................................................................

What type of mixture is made by thoroughly mixing powdered lemonade with water?

Homogeneous mixtures (solutions)

Mixtures with substances dissolved evenly into one another, like pink lemonade powder dissolved in water, are called homogeneous mixtures, or solutions.

Which of the following is a binary compound?

Answers

Answer: A. CaO

Took the test already.

Hellpppppppppppppppppppppp

Answers

Answer:

SnH4

Explanation:

Because the melting point of SnH4 is higher than CH4

4. Initially, 1 mol of oxygen (assumed to be an ideal gas) has temperature 310 K and volume 12 L. We will allow it to expand to volume 19 L. (a) What would be the final temperature if the gas expands adiabatically

Answers

Answer:

490.83 oK

Explanation:

First of all, we better agree on the meaning of the word adiabatically. It means without the loss or gain of heat. So nothing is given up to or taken from the environment.

This also assumes that no change has occurred in the pressure.

T1 = 310 oK

T2 = ?

V1 = 12 L

V2 = 19 L

T1/V1 = T2/V2

310 / 12 = x/19            Multiply both sides by 19

310*19 / 12 = T2         Multiply 310 * 19 on the left.

5890 / 12   = T2         Divide by 12

490.83 = T2

Which of the following methods will usually cause a reaction to speed up?



Group of answer choices

Removing the catalyst.

Combining the reactants at a lower temperature.

Grinding one of the reactants into a powder.

Reducing the concentration of reactants.

Answers

reducing the concentration of reactants

the method that will usually cause a reaction to speed up from the list given is: Reducing the concentration of reactants.

Meaning of Reaction

Reaction can be defined as the combination of substances or a process where substances acts on each other, where substances changes into different substances.

A reaction can be said to be the event that causes a restructuring or rearrangement of atoms of a substance when it is in contact with another substance.

In conclusion, the method that will usually cause a reaction to speed up from the list given is Reducing the concentration of reactants.

Learn more about Reaction: https://brainly.com/question/26018275

#SPJ2

what mass does a nuetron have?​

Answers

Answer:

1 AMU

Explanation:

Protons, neutrons, and electrons: Both protons and neutrons have a mass of 1 amu and are found in the nucleus.

How does a paper bag wrapped around a hot water bottle create convection?

Answers

How does a paper bag wrapped around a hot water bottle create convection?

Heat is a form of energy. You need energy to heat something up: for example, a cup of tea. To make your tea you probably use energy from electricity or gas. However, once your tea is hot, it won't stay hot forever. Just leave the cup of tea out on the table for a while, and you already know that it will become cooler the longer you wait. This is due to a phenomenon called heat transfer, which is the flow of energy in the form of heat. If two objects have different temperatures, heat automatically flows from one object to the other once they are in contact. The heat energy is transferred from the hotter to the colder object. In the case of the tea, the heat of the liquid is transferred to its surrounding air, which is usually colder than the tea. Once both objects reach the same temperature, the heat transfer will stop. Heat transfer via movement of fluids (liquids or gases) is called convection.




Want to keep warm this winter? Try this "cool" activity and find out what types of insulation work best--and why. Credit: George Retseck

ADVERTISEMENT
Key concepts
Physics
Heat transfer
Insulation
Material science
Introduction
What do you do when it gets very cold in winter? You probably turn your heater on, put on an extra layer of clothes or cuddle under a warm blanket. But have you ever thought about why a jacket helps you stay warm? Why are our clothes made from fabrics and not foils? Find out the answers in this activity; your results might even help you find the best way to stay warm in the cold!
Background
Heat is a form of energy. You need energy to heat something up: for example, a cup of tea. To make your tea you probably use energy from electricity or gas. However, once your tea is hot, it won't stay hot forever. Just leave the cup of tea out on the table for a while, and you already know that it will become cooler the longer you wait. This is due to a phenomenon called heat transfer, which is the flow of energy in the form of heat. If two objects have different temperatures, heat automatically flows from one object to the other once they are in contact. The heat energy is transferred from the hotter to the colder object. In the case of the tea, the heat of the liquid is transferred to its surrounding air, which is usually colder than the tea. Once both objects reach the same temperature, the heat transfer will stop. Heat transfer via movement of fluids (liquids or gases) is called convection.


Another type of heat transfer is conduction, in which energy moves through a substance (usually a solid) from one particle to another (unlike in convection where it’s the heated matter itself that moves). A pot handle getting hot would be an example of conduction.

A substance that takes the shape and volume of its container is in this phase is called a liquid

Answers

Answer:

liquid matter

Explanation:

Other Questions
That man is a snake, said Ted. First he lied to me, and then he stole my car.What is the connotative meaning of the word snake as it is used in the sentence? a. a deceitful person b. a slow movement c. a plumbing tool d. a scaly reptile what will happen to the gravition force between two bodies if the distance between them is halved keeping their masses constant Que verbo traduce la frase Darby Company, operating at full capacity, sold 163,500 units at a price of $87 per unit during the current year. Its income statement is as follows: Sales $14,224,500 Cost of goods sold 5,046,000 Gross profit $9,178,500 Expenses: Selling expenses $2,523,000 Administrative expenses 1,508,000 Total expenses 4,031,000 Income from operations $5,147,500 The division of costs between variable and fixed is as follows: Variable Fixed Cost of goods sold 60% 40% Selling expenses 50% 50% Administrative expenses 30% 70% Management is considering a plant expansion program for the following year that will permit an increase of $1,131,000 in yearly sales. The expansion will increase fixed costs by $150,800, but will not affect the relationship between sales and variable costs.Required:Determine the total variable costs and the total fixed costs for the current year. Identify the sequence that lists the sides of MNO in order from shortest to longest. Which statement describes Mustafa Kemal? Which is a problem that prevents Africa from being able to fully utilize its resources? Find the measure of the incanted angle to the nearest degree What is the amswerdkdmxmmdmdmdm Which of the following is a start codon?A.UAGB.AUGC.UAAD.UGA The following monthly data are available for Bonita Industries. which produces only one product: Selling price per unit, $42; Unit variable expenses, $14; Total fixed expenses, $42000; Actual sales for the month of June, 5000 units. How much is the margin of safety for the company for June please help me with this question orderliness as the mother of peace Professor Iron always gives two exams in his communications class. He only uses the lower of the two scores that a student gets on the exams when he calculates the course grade. Put the grade on the first exam on the horizontal axis and the grade on the second exam on the vertical axis. What kind of preference a student should have for these two grades. Group of answer choices Perfect Complements Perfect Substitutes Cobb-Douglas Preference Neutral Preference Convert 1nanosecond in to its SI init In Exercises 5156, the letters a, b, and c represent nonzero constants. Solve the equation for x2bx bx = -8 In 4 years Craston's age will be the same as Terrins age is now. In 2 years, Terrin will be twice as old as craston. Find their ages now Why most of the earthquakes are linked with fold mountains? Regional Lumber Company and Superior Builders Corporation enter into a contract for a sale of wood products. Regional, a merchant who deals in goods of the kind sold, makes implied and express warranties in connection with the sale. Under the UCC, if these are inconsistent: Government penting unces the economy by:A decling on the prices for goods available to consumersOB determining which government programs get the most fundingintencing the brands of products the country is allowed toDocesetting the salaries for employees in all private industriesPlease hurry I am on a test