Answer: Ignition System
Explanation:
Ignition System is the systems creates and delivers high voltage sparks at the right time to ignite the air-fuel mixture in the combustion chamber.
What are the 3 types of ignition systems?Automotive ignition systems can be categorised: coil-on-plug, distributor-based, and distributor-free (COP). Early ignition systems delivered the spark at the appropriate time using entirely mechanical distributors.
Thus, it is Ignition System
For more details about types of ignition systems, click here:
https://brainly.com/question/14094081
#SPJ2
Which type of material is known as elastomers to materials scientists and engineers
Answer:
Rubber-like solids with elastic properties are called elastomers.
Explanation:
Answer:
Rubber-like solids with elastic properties are called elastomers.
Explanation:
Why do you think Construction is desirous of a gender mixed work force
Answer:
According to the Bureau of Labor Statistics, only 9.9% of construction professionals are women. In regard to race, 30.7% of professionals in the industry are Hispanic or Latino, 6.2% are black, and a staggering 2% are Asian.
Explanation:
on some early automobiles both headlights went out when one bulb burned out. the headlights must have been connected in
Complete two examples of how scientists, technologists, engineers, and mathematicians may work together to create a new product invention or innovation
describe how you could engineer the situation to produce even more friction and heat
Which of these statements is true about Newton's First Law of Motion?
If the net force on an object is zero, its velocity will remain constant
An unbalanced force on an object will always impact the objects speed
an unbalanced force on an object will always change the objects direction
Answer:
the second one is correct
Explanation:
Explanation:
» If the net force on an object is zero, its velocity will remain constant
.Name the control group ___________________________ 2.Name the experimental group ____________________ 3.Name the independent variable __________________ 4.Name the dependent variable __________
Answer:
please
Explanation:
what is the story
What does MPL stand for in robot form.
Answer:
Mechanical Parts list
Answer:
Modular Prosthetic Limb
Explanation:
what is the largest, low-cost airline carrier in the world, which recently canceled thousands of flights for reasons partially disputed by the federal aviation administration?
The largest, low-cost airline carrier in the world that recently canceled thousands of flights for reasons partially disputed by the federal aviation administration (FAA) is Southwest Airlines.
Southwest Airlines canceled 2,500 flights in just a few days.
According to Southwest Airlines, the cause of the cancellation is due to air traffic control problems and disruptive weather.
While FAA claimed that nothing like a reported case of air traffic and staffing shortages.
Southwest Airlines is the world's largest low-cost carrier and has its main office is located in Dallas, Texas.
Hence, in this case, it is concluded that the correct answer is "Southwest Airlines."
Learn more here: https://brainly.com/question/24782945
Which of these is NOT one of the four A’s of defensive driving?
Answer:
It's called The LLLC Defensive Driving Principles™, but we just call it “Triple-L-C.” Using the Four Driving Principles of Safety, Look Ahead, Look Around, Leave Room, and Communicate, gives you the time and information you need to avoid an accident and be an all-around better driver.
Based on your client's request, you will now create a sketch model of your designed pet toy. You will use your technical sketch and scale dimensions to create a computer model according to the same scale. However, the creation of the sketch model is only part of the engineer's responsibility. You must create a 300- to 500-word script for a persuasive presentation of your sketch model to your audience (client) and convince him or her that this new pet toy is a product that the company will want to sell. Be sure to incorporate design elements and materials into your reasoning in your presentation.
Answer:
From this in-depth examination we aimed to draw out some of the key ... closely their business case and employ model makers to create a 3D prototype.
Explanation:
on gasoline powered boats, when should the blower be operated?
On gasoline powered boats, the blower should be operated before starting the engine, during fueling, etc.
In the following circumstances, the blower should be used on boats powered by petrol:
It's crucial to run the blower for a few minutes before starting the engine.It is advised to keep the blower going while you are fueling.When the vessel is in motion: Some marine safety recommendations advise running the blower continuously while the boat is underway, especially in enclosed engine compartments, however this is not required.Thus, during these conditions, one should operate the blower.
For more details regarding gasoline powered boats, visit:
https://brainly.com/question/4143582
#SPJ6
Why are sub station is used before distributing electricity to local factories and businesses in homes
Answer:
bise bolea no les en tiendo na
What is the total resistance of three resistors in parallel with values of 2 ohms, 4 ohms, and 4 ohms?
Answer:
So 1/Rt=1/4+1/4+1/2=4/4 = 1 so Rtotal=1
The total resistance of three resistors in parallel with values of 2 ohms, 4 ohms, and 4 ohms is 1 ohm.
What is resistance?The impediment to current flow in an electrical circuit is quantified by resistance. The Greek letter omega represents the unit of measurement for resistance, known as ohms.
The equivalent resistance will also be equal to R/n, where R is the value of the resistor. n is the total number of resistors in the combination if three or more resistors of the same value are connected in parallel.
As the resistors are connected parallelly, the resistance of all the resistors will be greater than the results. The calculation will be smaller than all resistors.
1 / Rt = 1 / 4 + 1 / 4 + 1 / 2 = 4 / 4 = 1
Therefore, the total resistance of three resistors in parallel is 1 ohm.
To learn more about resistance, refer to the link:
https://brainly.com/question/13831338
#SPJ2
_____________ designers want to modernize the ao dai in many different ways. *
1 điểm
A. Fashion
B. Fashionable
C. Fashionably
D. Lot of
Answer:
fashion designers is the answer
Answer:
Fashion
Explanation:
hope my answer helps you .
a ventilation blower should be operated for how long after fueling?
pleaseee help! 100 points!!!!!!!!!!!!!! geometry angles in parallel lines question.
Answer:
answer are c=74
d= 122
a= 58
b= 48
2. How were scientists able to access a car's computer system?
3. What other looming dangers are there for drivers of newer, computer controlled
Hęłłõ hõw årę ÿõū dõìńg tõdāÿ
Answer:
All good :)
What about you??
Technician A says that the connecting rod and main bearing caps should be marked before removing to ensure that they can be installed in the exact same location when reassembled. Technician B says that the tip of the valve stem should be filed before removing valves from the cylinder head to help prevent damage to the valve guide. Who is right
Answer:
Technician A
Explanation:
This is because when the dimacations are made, the surface area and length respectively can be maintained to reduce to idea of force which may lead to damage
List Examples of what an engineer does
To select the proper twist drill, one should check
оа
drill speed
Ob
size, sharpness and type of shank
ос
length of the drill cutting lips
Od
lubrication needed
Answer:
OB. size, sharpness and type of shank.
Explanation:
Hope this is helpful if not sorry :(
tech a says that all wheels must be torqued to prevent wheels from loosening up and falling off. tech b says that all wheels must be torqued to prevent over tightening, which can weaken lug studs and warp brake rotors. who is correct
Answer: New wheels should be re-torqued after the first 50 to 100 driving miles. This should be done in case the clamping loads have changed following the initial installation due to the metal compression/elongation or thermal stresses affecting the wheels as they are breaking in, as well as to verify the accuracy of the original installation.
Answer:
I thinkC
Explanation:
Why are plastics known as synthetic materials?
Which set of conditions will result in the highest rate of evaporation?
draw perpendicular lines based on the info in the image.
what happen when position and crest of a light wave decreases
Answer:
All photons travel at the speed of light. ... From this equation, it is clear that the energy of a photon is directly proportional to its frequency and inversely proportional to its wavelength. Thus as frequency increases (with a corresponding decrease in wavelength), the photon energy increases and visa versa.
Explanation:
in the multiple pipe system shown below, which of the following is true concerning the linear system?.
Answer:
maybe
Explanation:
th liner pupe us it it had ore moecuke and tepiract
BTSAUDY5 NAME STARTS FROM THIS
What are the rules for maintaining a time margin for safe driving?
Answer:
We should keep a good distance between the vehicle infront of us and from ours to avoid any type of accident.
3-second rule=>allowing a minimum of 3 seconds of travel between our vehicle and the vehicle we are behind.
Explanation:
HOPE IT HELPS YOU!!