Oxygen Molecules taken in per breath: The Athletes result will be?
Answer:
Explanation:
the answer is higher because there is more exercise that makes it higher
hope this helps
Four oranges were placed in a series circuit. Approximately what voltage did this produce?
Answer:
Four times the original amount if only one orange was used
Explanation:
We can assume that the oranges all have equal voltages. Connecting them in series will have an increasing effect on the voltage delivered. In our case, this will produce 4 times the voltage of the circuit when only one orange is used.
Whenever simple cells are connected in series, the voltages of the individual cells are added up to form the voltage of the whole circuit.
Let us assume that the voltage of each of the oranges is approximately 0.9 volts. The Voltage produced when the 4 oranges are joined in series is 0.9 + 0.9 + 0.9 + 0.9 = 3.6 volts
What are quantum numbers?
Answer:
a number which occurs in the theoretical expression for the value of some quantized property of a subatomic particle, atom, or molecule and can only have certain integral or half-integral values.
Explanation:
In other words, it is a number that is Part of scientific theories or chemistry
What is the heliosheath?
Answer:
The heliosphere is the vast, bubble-like region of space that surrounds and is created by the Sun.
calculate the percentage by mass of oxygen in ammonium nitrate
Answer:
Percent composition of O is 48g80g×100%=60%
Which choice names part of the lithosphere?
-inner core
-outer core
-all of the mantle
-crust and outer part of the mantle
pls i give a brainest
What is the molality of a solution that has 6 mol of CaCl2 in 3 kg of water?
A. 2 m
B. 0.5 m
C. 6 m
D. 3 m
Answer:
2m
Explanation:
Hope this helps :)
Answer:
Answer is B.
Explanation:
3mol/6kg = 0.5m
Which of the following are considered physical changes?
[mark all correct answers]
a. Boiling water
b. Crushing a can
c. Burning wood
d. Rusting nail
e. Shredding paper
According to the rate law for the reaction, an increase in the concentration of hydronium ion has what effect on this reaction?
Answer:
The rate of reaction increases.
Explanation:
higher concentration --> more collisions --> rate increases
2. Using what you know of particle motion in solids, liquids, and gases, explain why you think temperature changes affect a substance's
state of matter. Use the terms particle motion, temperature, solid, liquid, and gas in your answer.
Explanation:
Temperature changes have significant impact on the physical states of matter and it drives most physical changes and even the chemical alteration occurring to substances.
When the temperature of substance increases, the particle's average kinetic energy increases. The average kinetic energy of the particles is the component heat resident within a body. As this energy increases, for solids, their particles in fixed lattices breaks free and begins move. Further increase in the temperature will cause a motion which leads to flowing of the particles on top of one another. This eventually culminates in bond breaking and hence gases forms. When heat is removed, the reverse process is what is ensues.Use the drop-down menus to complete the statements.
A segment of DNA is called a
.
A complex of nucleic acids and proteins that make up chromosomes is called
.
A structure in the nucleus of an eukaryotic cell that is made up of condensed DNA is called a
.
A segment of DNA is called a gene.
A complex of nucleic acids and proteins that make up chromosomes is called Chromatin
A structure in the nucleus of an eukaryotic cell that is made up of condensed DNA is called a chromosome.
Answer:
1. Gene
2. Chromatin
3. chromosome
Explanation:
I hope this helps you :)
Question: Based on this information, which type of light is more likely to damage the material?
1)The gamma ray light is more likely to damage the material because the gamma ray light can
pull energy out of the material when it passes through the material.
b
2)The X-ray light is more likely to damage the material because the X-ray light bounces off of
the material, which means that it has more energy.
3)There is no way to know because they are two different types of light, and different types of
light can change a material in different ways.
4)Neither type of light is likely to damage the material because the material does not take in
energy from either the X-ray light or the gamma ray light.
Scroll for more
< Back
6
Save and Continue
lol
Answer: It will be D which is number 4........
Neither type of light is likely to damage the material, because the material does not take in energy from either the X-ray light or the gamma ray light.
Explanation:
how many formula units are in 0.96 moles of H2O
Answer:
18.02 amu
Explanation:
Silicon carbide, SiC, is commonly known as carborundum. This hard substance, which is used commercially as an abrasive, is made by heating SiO2 and C to high temperatures.
SiO2(s) + 3C(s) → SiC(s) + 2CO(g)
How many grams of SiC form when 3.00 g of SiO2 and 4.50 g of C are allowed to react?
Mass of SiC = 2 g
Further explanationGiven
Reaction
SiO₂(s) + 3C(s) → SiC(s) + 2CO(g)
3.00 g of SiO₂
4.50 g of C
Required
mass of SiC
Solution
mol SiO₂ (MW=60,08 g/mol) :
= 3 g : 60.08 g/mol
= 0.0499
mol C(Ar = 12 g/mol) :
= 4.5 g : 12 g/mol
= 0.375
mol : coefficient of reactants =
SiO₂ : 0.0499/1 = 0.0499
C : 0.375/3 = 0.125
SiO₂ as a limiting reactant(smaller ratio)
Mol SiC based on mol SiO₂ = 0.0499
Mass SiC :
= mol x MW
= 0.0499 x 40,11 g/mol
= 2 g
what is the answer pls help me
Answer:fist one 2 and 3 next
Explanation:
i looked it up
2 Students were asked to identify the location of elements in the periodic table based on clues
printed on game cards.
Element 1
• Shiny black solid
• Metalloid
• 3 valence electrons
• 2 energy levels
Element III
• Colorless gas
• Nonmetal
• 8 valence electrons
• 5 energy levels
Element II
• Steel-gray solid
• Brittle metalloid
• 5 valence electrons
• 4 energy levels
Element IV
• Silvery-white solid
• Soft metal
• 2 valence electrons
• 6 energy levels
Based on the data, which periodic table shows the correct location of the four elements?
Answer:
B
Explanation:
I took the test
Element 1 is silicon. An element's atoms all contain the same amount of protons, but its electron and neutron counts might vary.
What is element?A material that cannot be destroyed chemically is referred to as a chemical element. Although chemical processes cannot modify an atom, nuclear reactions can create new elements.
The quantity of protons an element has defines it. An element's atoms all contain the same amount of protons, but its electron and neutron counts might vary. Ions are produced by altering the electron to proton ratio, whereas isotopes are produced by altering the neutron count.
118 known elements are present. A study is being done to create element 120.1. The periodic table will have to be modified to include element 120 after it has been created and validated. Element 1 is silicon.
Therefore, the element 1 is silicon.
To know more about element, here:
https://brainly.com/question/1896898
#SPJ6
Calculate the percentage by mass in each element
N in NH3
Answer:
82.35%.
Explanation:
Mass of 1 molecule of ammonia
NH₃ = 14+3(1)
= 17
Calculating percentage by mass of N.
[tex]\%=\dfrac{\text{Mass of Nitrogen atom}}{\text{Mass of ammonia molecule}}\times 100[/tex]
[tex]\%=\dfrac{14}{17}\times 100\\\\=82.35\%[/tex]
So, the required percentage is 82.35%.
Balance Nuclear Reaction
94239Pu --> 24He + ________
Does N2F2 obey the octet rule? Explain.
22. Julie took a road trip to Canada. She traveled a total of 1,750 miles in 25 hours.
Calculate Julie's average speed.
Answer:
s = 70 m/h
Explanation:
Given data:
Distance traveled = 1750 mile
Time taken = 25 hours
Average speed = ?
Solution:
Average speed can be calculated by dividing distance traveled over time taken.
Formula:
s = d/t
by putting values,
s = 1750 mile / 25 hour
s = 70 m/h
How much iron is present in 1.3400 grams of iron (III) oxide?
Answer:
69.94%
Explanation:
69.94% IRON IS PRESENT
5. How many mol are in 2.5x10 23
atoms of copper?
a. 0.42 mol Cu (yellow)
b.4.2 mol Cu (pink)
c. I.8 mol Cu (blue)
a student wants to determine if different types of car wheels impact how far a car will travel after leaving a ramp. The same car and the same ramp or used for each trial run. The data collected are shown in the table.
A. Large plastic Wheels
B. Large rubber Wheels
C. Small rubber Wheels
D. Small plastic Wheels
Answer:
b. it has the longest average distance
8.
Which of the following is NOT a desirable property for a material that is to be made ir
window?
A) hard
B) waterproof
C) opaque to light
D) rigid
10 pointsss Where are tsunamis likely to originate?
Answer:
Pacific Ocean
Explanation:
Which measurement shows the correct degree of precision for this ruler?
a. 1.5 cm
b. 1 cm
c. 1.55 cm
Answer:
1.5 cm
Explanation-
I took it ...
Which describes the composition of carbohydrates?
Answer: Carbohydrates (carbo- = “carbon”; hydrate = “water”) contain the elements carbon, hydrogen, and oxygen, and only those elements with a few exceptions. The ratio of carbon to hydrogen to oxygen in carbohydrate molecules is 1:2:1.
HOPE THIS HELPS
CAN U GIVE ME BRAINLIEST
Pls help (there is a pic)
How many grams of aluminum oxide are produced according to the reaction below given that you start with 13.2 grams of Al and 13.2 grams of O2?
Reaction: 4AI + 3 02 → 2A1203
Answer: 24.87g Al2O3
Explanation: Aluminum is our limiting reagent
[tex]13.2g Al * \frac{1 mol Al}{26.98 g} * \frac{2 mol Al2O3}{4 mol Al} = 0.244 mol Al2O3[/tex]
First of all we need to convert the grams of aluminium to moles, then use the molar fraction of the balanced equation (4 moles of aluminium equals 2 of aluminum oxide).
If we made the same procedure with the oxigen we get a 0.273 mol of Al2O3, therefore the O2 is the excess reagent.
The last step is convert the moles of the limiting reagent to grams
[tex]0.244 mol Al_{2} O_{3} * \frac{101.96g}{1mol Al2O3} = 24.87g Al2O3[/tex]
And that´s it!
Need help on this please help
Answer:
The answer is: The Earth rotates on its axis.
