what is time and energy​

The acquisition of additional certifications with a personal refined craft skills can increase the odds for career advancemen.

An advancement is achieved in a career if a professional use their skill sets, determination or perserverance to achieve new career height.

An example of a career advancement is when an employee progresses from entry-level position to management and transits from an occupation to another.

Therefore, the Option A is correct.

Read more about career advancement

brainly.com/question/7053706

Answer:

B probably

Explanation:

Because the prompt doesn't specify what sort of violation it could be anything maybe when they release the metals during the day and so on.

Given a 750 m section with distance of 1000m , The calculated rate of seepage from the river to the channel has been calculated to be 262.5 m³/day.

This is the calculated rate that shows how water is infiltrated downward into the soil.

The formula is given as

[tex]Q = KA \frac{dh}{dl}[/tex]

A = Area = 750*10 = 7500m

dh = h₂-h₁

= 10 - 5 = 5m

dl = 1000m

[tex]Q = 7*7500*\frac{5}{1000}[/tex]

= 262.5m³

The rate of seepage from the calculation above is  262.5m³.

Read more on rate of seepage: https://brainly.com/question/21499824

There are lots of hazard. The type of hazard that the operator will be exposed to is noise.

Noise is known to be a very popular form of physical hazards that is said to be present in all occupation.

This noise hazard is often based on its frequency, amplitude (volume) and term of exposure such as long or short term, It is said that one should wear hearing protection as long exposure to noise can lead to  temporary or permanent loss of hearing.

Learn more about operator from

https://brainly.com/question/17484823

The action control to move the rudder from one point to the other is doen when The rudder, when turned to starboard, produce a force that is towards the port (called the rudder force).

In a vessel or ship, found in small craft, the rudder is known to be operated manually through the use of a handle that is called a tiller or helm.

In a bigger vessels, the rudder is known to be turned through the use of an hydraulic, steam, or electrical machinery. The first type of rudder was side to be a paddle or oar.

Learn more about action  from

https://brainly.com/question/1718605

Answer:

whiteness refers to white people(WHITE americans), back then white people got all the good stuff while colored people (meaning everyone who is not white) got old breaking down things. This influenced our society back then and made people think that white people are way better than colored. Which is SO NOT true, everyone is the same

Answer:

A title

Explanation:

A title is a legal document that proves legal ownership over an asset or piece of property. Assets such as homes, land, other types of real estate, vehicles, and personal property such as jewelry all have titles to demonstrate ownership.

Answer:

A temperature sensor is installed upstream of the hot wire. The hot wire is then heated to a temperature higher than the air temperature determined by the temperature sensor. As the hot wire is cooled by the incoming air, the heating current must be increased to maintain a constant wire temperature.

Explanation:

Answer:

Dear if possible can you post the complete question

I would be grateful to help you

Answer:

Glass

Explanation:

Please mark me the brilliant

D) cost

The fund available for a project is the first factor to be considered to ensure that the project comes to reality and serve it’s purpose

Answer:

Function

Explanation:

Plato

Explanation:

1 meter ≈ 3.281 ft.

so,

1 m² = 1m×1m ≈ 3.281 × 3.281 = 10.764961 ft²

now we have 22.3 ft² of skin.

that would be then

22.3/10.764961 = 2.071535605 ≈ 2.1 m² or even more rounded ≈ 2 m²

Green with white lettering are the colours of a sign which tells you the distance to the next exit of a highway.

Green is a common color for directional signage. Along with location and directions, these signs also tell you how far something is. Blue: This color is also used for wayfinding signage. Information on nearby amenities including rest areas, hospitals, gas stations, and motels is provided by these signs.

Red could be difficult to understand in a crisis because we are taught to interpret it as "stop." Contrarily, green signifies safety and "go," making it clear to the public to maintain composure and abide by the denotations. This is why green emergency signs are utilized in public buildings.

White: A white backdrop indicates a regulatory sign. Yellow: A general warning is sent by the color yellow. Green: Green denotes safe directing indicators or traffic patterns.

Thus, Green with white lettering.

For more information about colour signs of distance, click here:

https://brainly.com/question/14453702

#SPJ6

The composition of the mixture on a mass basis are as follows:

number of moles = mass of substnce / molar mass

molar mass and molecular weight has equal numerical values therefore

Number of moles = mass of substnce / molecular weight

mass of substance = number of moles * molecular weight

the moles are expressed in percentage hence the total moles should be 100

check: 32.9 + 40.7 + 26.4 = 100

He

mass of substance = 32.9 * 4.003 = 131.6987 g

[tex]N_{2}[/tex]

mass of substance = 40.7 * 28.02 = 1140.414 g

Ar

mass of substance = 26.4 * 39.95 = 1054.68 g

Answer:

I know A is correct but not so sure about B, like I don't know if B is correct or wrong

The item that is least likely to cause an exhaust emission test failure as of a result of excessive nox emissions is; poorflow through the egr system.

Exhaust emissions simply means substances emitted into the atmosphere from the exhaust discharge nozzle of an aircraft or aircraft engine.

Now, when the test fails as a result  of excessive nox emissions, we can say that high NOx emissions can occur when an engine's air-fuel mixture is too lean. Thus, we can conclude that the reason for exhaust emission test failure as of a result of excessive nox emissions is due to poorflow through the egr system.

Read more about emissions at; https://brainly.com/question/14154063

The number of hectares of each crop he should plant are; 250 hectares of Corn, 500 hectares of Wheat and 450 hectares of soybeans

He grows corn, wheat and soya beans on the farm of 1200 hectares. Thus;

C + W + S = 12   ----(1)

It costs $45 per hectare to grow corn, $60 to grow wheat, and $50 to grow soybeans. Thus;

45C + 60W + 50S = 63750  -----(2)

He will grow twice as many hectares of wheat as corn. Thus;

W = 2C    ------(3)

Put 2C for W in eq 1 and eq 2 to get;

C + 2C + S = 1200

3C + S = 1200     -----(4)

45C + 60(2C) + 50S = 63750

45C + 120C + 50S = 63750

165C + 50S = 63750    ------(5)

Solving eq 4 and 5 simultaneosly gives;

C = 250 and W = 500

Thus; S = 1200 - 3(250)

S = 450

Read more about algebra word problems at; https://brainly.com/question/13818690

The temperature of the gas in the tank is the ratio of heat capacities times the temperature of gas in the constant pressure line.

It should be noted that temperature simply means the measure of hotness and coldness in a body

From the given information, H is the enthalpy of gas on the constant pressure line, m is the mass flow rate and U is the internal energy of gas.

Here, the temperature of the gas in the tank is the ratio of heat capacities times the temperature of gas in the constant pressure line.

Learn more about temperature on:

https://brainly.com/question/24746268

The principles referred to in the question are called biomechanical principles. Some of them are:

The principle that is most relevant to jumping is called Angular Momentum.

Simply defined, this refers to the velocity of the rotation of a body around an axis or a fixed point.

Other principles of biomechanics are the principles of:

See more about biomechanical principles at:
https://brainly.com/question/1087668

Answer:

Industrial Engineers study various types of math including calculus, numerical analysis, statistics, linear algebra, numerical methods, operations research, etc. We do not necessarily use these in our day-to-day activities, but they help to build an analytical mindset that many employers value.

You are surely going to have commercial subjects , honestly when doing engineering every type of math is taught.

If you can't ignore a distraction, as a driver you should: D. Both A and B.

A distraction can be defined as any form of event that is capable of making a driver to loose concentration or lure his or her eyes away from the road.

This ultimately implies that, a distraction can cause a driver to experience a road accident (car crash) if not properly managed or ignored.

In conclusion, if you can't ignore a distraction, as a driver you should pull over or take care of it at your next planned stop.

Read more on traffic regulations here: https://brainly.com/question/22768531

Assuming  the wedge has an angle of 5°.The minimum value of the force P that is required to begin moving the block up the incline is: 322.84 N.

First step

Using this formula to find the weight of the block

W=mg

W=27×9.81

W=264.87 N

Second step

Angles of friction ∅A and ∅B

∅A=tan^-1(μA)

∅A=tan^-1(0.70)

∅A=34.99°

∅B=tan^-1(μB)

∅B=tan^-1(0.40)

∅B=21.80°

Third step

Equate the sum of forces in m-direction to 0 in order to find the reaction force at B.

∑fm=0

W sin (∅A+20°)  + RB cos (∅B+∅A)=0

264.87 sin(34.99°+20°) + RB cos (21.80°+34.99°)=0

216.94+0.5477Rb=0

RB=216.94/0.5477

RB=396.09 N

Fourth step

Equate the sum of forces in x-direction to 0 in order to find force Rc.

∑fx=0

RB cos (∅B) - RC cos (∅B+ 5°)=0

396.09 cos(21.80°) - RC cos (21.80°+5°)=0

RC=396.09 cos(21.80°)/cos(26.80°)

RC=412.02 N

Last step

Equate the sum of forces in y-direction to 0 in order to find force P required to move the block up the incline.

∑fy=0

RB sin (∅B) + RC sin (∅B)-P=0

P=Rb sin (∅B) + RC sin (5°+∅B)

P=396.09 sin(21.80°) +412.02sin (5°+21.80°)

P=322.84 N

Inconclusion the minimum value of the force P that is required to begin moving the block up the incline is: 322.84 N.

Learn more about Minimum value of force P here:https://brainly.com/question/20522149

Explanation:

a stationer sell 8 pencil for the cost price of 10 ,find his gain percent

Answer:

This is for all hvac parts lol

Answer:

Units larger than a terabyte include a petabyte, exabyte, zettabyte, yottabyte and brontob

Answer:

Explanation:

For first isobaric process (expansion with constant pressure):

[tex]W_{1}=P_{1}(V_{2}-V_{1})=(0.43\times 10^{6})(2.9-0.28)=1.1266 \times 10^{6} J=1.1266 MJ(+) (Expansion)[/tex]

Now, for the first isochoric: [tex]W_{2}=0[/tex], and [tex]Q_{2}=\Delta U=U_{3}-U_{2}[/tex]

For the second isobaric process (compression with constant pressure):

[tex]W_{3}=P_{2}(V_{1}-V_{2})=(4.3\times 10^{6})(0.28-2.9) =-11.266\times 10^{6}J=-11.266 MJ (Compression)[/tex]

For the last isochoric: [tex]W_{4}=0, Q_{4}=\Delta U=U_{4}-U_{3}[/tex]

So, the total work per cycle: [tex]W=W_{1}+W_{2}+W_{3}+W_{4}=1.1266+0-11.266+0=-10.1394 MJ[/tex]

Answer:

The PCV reduces blowby emissions from the engine.

Answer:

You shold wear Gogles

Explanation:

It is harder to see with no gogles

When operating in low-visibility situations, it is critical to take necessary precautions to preserve safety and retain situational awareness. When operating in low-visibility situations, it is critical to take necessary precautions to preserve safety and retain situational awareness.

Slow down: Reduce your speed to compensate for decreased vision. This provides you with additional time to respond to unanticipated obstructions or threats. Increase your following distance by leaving a bigger gap between your car and the vehicle ahead of you. This acts as a buffer zone and allows for more stopping distance.

Turn on your headlights and fog lights, even during the day, to improve visibility for yourself and other vehicles. Use fog lights if your car has them, as they are meant to penetrate fog and provide improved illumination. Use windscreen wipers and defrosters: Make sure your windscreen wipers are in good working order and that the appropriate speed setting is used to keep the windscreen clear. To prevent window fogging, turn on the defroster if necessary.

To know more about visibility, here:

https://brainly.com/question/33339568

#SPJ4