big sorry for this
imma follow you
You take a trip to Oklahoma City. The turnpike between Tulsa and OKC
is 90 miles long. You drive slowly for an hour and forty-five minutes, stop
at the rest area for fifteen minutes, then drive very fast from the rest
area to the City, arriving an hour after you left the rest area.
What was your average speed for the trip?
[tex]speed_{avg} = \frac{Σ\:distance}{ total\: time}[/tex]
So, according to the question:
distance = 90 miles
time = 1h 45min + 15 min + 1h = 3h
[tex]Therefore:\\ speed_{avg} = \frac{90}{3} mph \\ = \boxed {30 \: mph}[/tex]
Calculate the de moglie Wavelength of election having kinetic energy of 400 ev
Answer:
613.5 pm
Explanation:
We know that de Broglie wavelength of an electron :
λ = 1.227 / √E nm
λ = 1.227 / √400 nm
λ = 1.227 / 20 nm
λ = 0.6135 nm
λ = 0.6135 x 10⁻⁹ m
λ = 613.5 x 10⁻¹² m
λ = 613.5 pm
Wavelength of election having kinetic energy of 400 ev.
Solution:WE = 1.227 / √election nmWE = 1.227 / √e400nmWE = 1.227 / √20nmWE = 0.6136nmWE = 0.6136 x 10-⁹mWE = 613.5 x 10-¹²mWE = 613.5Jupiter's moon Io has active volcanoes (in fact, it is the most volcanically active body in the solar system) that eject material as high as 500 km (or even higher) above the surface. Io has a mass of 8.93×1022kg and a radius of 1821 km.
How high would this material go on earth if it were ejected with the same speed as on Io? ( RE =6370km , mE=5.96×1024kg )
Include variations in gravitational acceleration
The material will go as high as 91.54 km would this material go on earth if it were ejected with the same speed as on Io.
What is will be the height of the material on earth?The height of the material on earth will be derived from the given values as follows:
Gravitational constant, G = 6.67 × 10⁻¹¹ m³/kgs²radius of Io, r = 1821000 mmass of Io, m = 8.93 × 10²² kgHeight of materials, H = 500000 macceleration due to gravity on Earth, g = 9.81 m/s²Tue acceleration due to gravity on Io, go is given as:
[tex]g_o = \frac{GM}{r^{2}}[/tex]
Substituting the values:
[tex]g_o= \frac{6.67×10^{-11}×8.93×10^{22}}{1821000^{2}}[/tex]
[tex]g_o = 1.796 m/s^{2}[/tex]
Height on earth, He and Height on Jupiter H is given as follows:
[tex]H_e = \frac{v^{2}}{2g}[/tex]
[tex]H = \frac{v^{2}}{2g_o}[/tex]
Taking ratio of the two heights and solving for height on earth, He:
[tex]H_e = H × \frac{g_o}{g}[/tex]
Substituting the values:
[tex]H_e = 500000 × \frac{1.796}{9.81} = 91539.245 m[/tex]
Therefore, the material will go as high as 91.54 km would this material go on earth if it were ejected with the same speed as on Io.
Learn more about height at:
#SPJ1
A few friends went skating on the frozen lake in their hometown. At one point you can hear the ice cracking. What advice can you give them so that the ice does not break and the skaters on the lake are not endangered?
Answer: i'll tell them to be careful. However, the most common is using a drill bit. Take a step close to the shore and listen for cracking. If there is cracking, do not risk going out on the ice. If there is no cracking, take a cordless drill and check the thickness using an extended drill bit.
Where on the periodic table are nonmetal elements mostlikely found?
A. Along the stairstep line
B. On the right side
C. On the left side
D. At the bottom
Answer: B. On the right side
Explanation: Metals are located on the left of the periodic table, and nonmetals are located on the upper right.
A student repeats a reaction several times to test the effects of various
changes on the reaction rate. The data table shows the results. How does
increasing the temperature of the system change thereaction rate?
A. Increasing the temperature decreases the reaction rate.
B. Increasing the temperature increases the reaction rate.
C. More information is needed to determine what happens to the reaction rate.
D. Increasing the temperature has no effect on the reaction rate.
Answer:
B. Increasing the temperature increases the reaction rate.
Explanation:
This is as with a higher temperature the particles have more kinetic energy, this is the consequece of the increase in reaction rate as the frequency of particles colliding is increased.
Answer: B
Explanation:
How long will it take for a spacecraft traveling at
15,000 Kilometers per hour to cover the distance from the
Earth to the Moon, which is about 250,000 Kilometers?
Answer:
16 2/3 hr
Explanation:
250 000 km / 15 000 km/hr = 16 2/3 hours
Each box contains information from two different ecosystems about a similar pattern of
interaction between two species that live in close association with each other.
Categorize the type of symbiotic relationships described in the boxed information.
Answer:
What is the interaction between two different species in an ecosystem called?
Interactions between different species in a community are called interspecific interactions—inter- means "between." Different types of interspecific interactions have different effects on the two participants, which may be positive (+), negative (-), or neutral (0).
Explanation:
Do electrons flow easier with
HIGH resistance or LOW
resistance?
A. low
B.high
Answer:
low.
Explanation:
it makes the flow easier if its lower because, the resistance isn’t pushing as hard against the flow which means that the flow is easier.
Lab:Motion
Here you go if you need help!!!!!!
1. Describe the three Newton's Law of Motion.
Answer:
1st law--Newton's first law states that every object will remain at rest or in uniform motion in a straight line unless compelled to change its state by the action of an external force. This is normally taken as the definition of inertia. The key point here is that if there is no net forceacting on an object (if all the external forces cancel each other out) then the object will maintain a constant velocity. If that velocity is zero, then the object remains at rest. If an external force is applied, the velocity will change because of the force.
2nd— The second law explains how the velocity of an object changes when it is subjected to an external force. The law defines a force to be equal to change in momentum(mass times velocity) per change in time. Newton also developed the calculus of mathematics, and the "changes" expressed in the second law are most accurately defined in differential forms. (Calculus can also be used to determine the velocity and location variations experienced by an object subjected to an external force.) For an object with a constant mass m, the second law states that the force F is the product of an object's mass and its acceleration a:
F = m * a
For an external applied force, the change in velocity depends on the mass of the object. A force will cause a change in velocity; and likewise, a change in velocity will generate a force. The equation works both ways.
3rd law-- The third law states that for every action (force) in nature there is an equal and opposite reaction. In other words, if object A exerts a force on object B, then object B also exerts an equal force on object A. Notice that the forces are exerted on different objects. The third law can be used to explain the generation of lift by a wing and the production of thrust by a jet engine.
A model airplane heads due east at 1.50 meters per second, while the wind blows due north at 0.70 meter per second. The scaled diagram below represents these vector quantities.
A)1.7m/s
B)1.7m/s^2
C)2.2m/s
D)2.2m/s²
The resultant physical quantity, velocity is 1.7 m/s. The correct option is A.
What is triangle law of vector addition?When two vectors are represented by vectors, their resultant will be the closing side of the triangle.
A model airplane heads due east at 1.50 meters per second, while the wind blows due north at 0.70 meter per second.
The right angle triangle is formed from the two velocity vectors and its resultant will be its hypotenuse.
Then, from the Pythagoras theorem,
Vr ² = (0.70)² + (1.50)²
Vr = 1.65 m/s
Thus, the resultant velocity is approximately 1.7 m/s.
Learn more about triangle law of vector addition.
https://brainly.com/question/15074838
#SPJ1
All nuclear reactions generate radioactive waste. Which answer correctly lists
nuclear reactions beginning with the cleanest reaction?
A. Radioactive decay, nuclear fusion, nuclear fission
B. Nuclear fission, nuclear fusion, radioactive decay
C. Nuclear fusion, nuclear fission, radioactive decay
D. Radioactive decay, nuclear fission, nuclear fusion
A particle is in its state of uniform circular motion. prove that its projection along one of its diameter executes simple harmonic motion.
x = R Cos wt, if x = R at t = 0
Uniform circular motion means that w is a constant.Then v = dx/dt = Rw Sinwt
a = d²x/dt² = - Rw² Cos wt = -w² x
Hence its motion is a SHM10. Explain why a power plant doesn’t make electricity.
Answer: The power station converts stored chemical energy in the fuel to kinetic energy in the raised temperature of the steam that pushed a turbine to rotate the generator that makes electricity.
So chemical to thermal (kinetic) to thermal to kinetic to electrical. Then mostly to heat or movement.
Loads of losses, thermal, mostly.
Explanation: hopes this helps
In all of the power plants, electricity is generated by rotating turbine inside a magnetic field. That is why, power plant transfers mechanical energy into electric energy. That is why, it doesn’t make electricity.
What is power plants?
An industrial facility for the production of electricity is referred to as a power plant. In most cases, power plants are wired into a grid.
A revolving device called a generator, which transforms mechanical power into three-phase electric power, is found in many power plants. An electric current is produced by the movement of a conductor in relation to a magnetic field.
The majority of power plants throughout the world produce electricity by burning fossil fuels including coal, oil, and natural gas. Nuclear energy and the usage of renewable energy sources including solar, wind, geothermal, and hydroelectricity are examples of low-carbon power sources.
Learn more about power plant here:
https://brainly.com/question/1474542
#SPJ2
What is the purpose of an acid-base titration?
Answer:
the detection of the equivalence point, the point at which chemically equivalent amounts of the reactants have been mixed.
If the diameter of a wire is tripled and the length is doubled, the resistance would change by a factor of __?
Answer:
it’s going to be times 3
Explanation:
so the answer would be three times which means it will change by a factor of 3.
I’m sorry I wrote it wrong the first time.
HELP ASAP PLS!!!
when you see a full moon, what type of tides do you expect there to be?
Answer:
Spring High Tide
When the moon is full or new, the gravitational pull of the moon and sun are combined. At these times, the high tides are very high and the low tides are very low.
PLEASE HELP 100 POINTS! Please fill in the scale distance from sun and diversion factor, listing off the numbers works
Solved your another question same like this with scaling to Cm this time we go with metre(m)
Scale factor
1km=10³m1m=10^{-3}kmMercury
58000mVen us
108000mEarth
150000mMars
228000mJupiter
778000mSaturn
1430000mUranus
2870000mNeptune
4500000mWhat factors affect the strength and direction of electrical forces?
Answer:
The strength of the electric field is determined by the amount of charge on the source charge (Q) and the separation distance (d) from the source charge.
Explanation:
The interaction of charged objects is a non-contact force that operates over a certain separation distance. Distance, distance, distance. Every electrical contact is accompanied by a force, emphasizing the significance of these three factors. Whether it's a plastic golf tube attracting paper bits, two like-charged balloons repelling, or a charged Styrofoam plate interacting with electrons in a piece of metal, the three crucial factors that impact the strength of the interaction are always two charges and a distance between them. The electrical force, like all other forces, is usually measured in Newtons. The electrical interaction's intensity is a vector quantity with both magnitude and direction since it is a force. The electrical force's direction is determined by whether the charged objects are charged with similar or opposing charges, as well as their spatial orientation. With a little logic and knowledge of the two objects' charge types, the direction of the force on either of them may be determined. Objects A and B in the figure below have similar charges, hence they repel each other.
Which landscape feature can be caused by chemical
weathering?
OU-shaped valley
O Basalt columns
O Limestone caves
Answer: Limestone Caves
Explanation: The most common feature that can be caused purely by chemical weathering is Karst Landscape, which can lead to caverns and sinkholes.
In which 120-V light bulb does the filament have greater resistance: a 60-W bulb or a 120-W bulb?
Answer:
60W
Explanation:
A higher watt bulb allows more electricity through, therefore the resistance must be lower.
Write an expression to evaluate the relative error in g (given that g= 2h/t^2) in terms of h,Δh,t,Δt
An expression which can be used to evaluate the relative error in g (in terms of h, Δh, t, and Δt) is: [tex]\delta = \frac{t^2(h\;+\Delta \;h) }{h(t\;+\;\Delta t)^2} - 1[/tex]
What is relative error?Relative error can be defined as a measure of the ratio of an absolute (real) value of a measurement to an expected (theoretical) value. Also, it's independent of the magnitude of its values.
How to evaluate the relative error in g?In order to write this expression, we would divide the absolute (real) value by the expected (theoretical) value as follows:
[tex]\delta = \frac{g(h\;+\;\Delta h,t \;+ \;\Delta t) - \;g(h,t)}{g(h,t)} \\\\\delta = \frac{g(h\;+\;\Delta h,t \;+ \;\Delta t) }{g(h,t)} - 1\\\\\delta = \frac{t^2(h\;+\Delta \;h) }{h(t\;+\;\Delta t)^2} - 1[/tex]
Note: g = 2h/t²
Read more on relative error here: https://brainly.com/question/13370015
#SPJ1
Using the formula below, determine how
many seconds it would take for a satellite
traveling at 4 miles per second to travel
11,000 miles across the Pacific Ocean.
speed=
A 27.5 seconds
B 45 seconds
C 2,750 seconds
D 3,000 seconds
An airplane on a runway accelerates at 4.0 meters/second2 for 28.0 seconds before takeoff. How far does the plane travel on the runway before
takeoff?
A. 1.6 x 103 meters
B. 1.7 x 103 meters
C. 3.1 x 103 meters
D. 3.3 x 103 meters
Answer:
A
Explanation:
d = 1/2 a t^2 = 1/2 (4)(28^2) = 1568 m ~ 1.6 x 10^3
How do you think animals are affected by seasonal change?
Answer:
Animals follow the seasons very closely. Changes in the length of the day or temperature affect the animals' hormone production and cause them to behave according to the season. For that reason, animals instinctively know when it's time for them to mate, build a nest, fly south or stock up on food for the winter.
A positive charge is fixed at point (−4,−3) and a negative charge − is fixed at point (−4,0). Determine the net electric force ⃗ net acting on a positive test charge + at the origin (0,0) in terms of the given quantities and physical constants, including the permittivity of free space 0. Express the force using unit vector notation. Enter precise fractions rather than entering their approximate numerical values.
The net electric force acting on a positive test charge at the origin is determined as ¹/₉(kq₁q₂).
Net electric force on the chargesThe net electric force on the charges is calculated as follows;
F = kq₁q₂/r²
where;
k is coulomb's constantq₁ and q₂ are the chargesr is the distance between the chargesDistance between the charges[tex]|r| = \sqrt{(x_2-x_1)^2+ (y_2-y_1)^2} \\\\|r| = \sqrt{(-4--4)^2+ (0--3)^2} \\\\|r| = \sqrt{(0)^2 + (3)^2} \\\\|r| = 3 \ units[/tex]
[tex]F_{net} = \frac{kq_1q_2}{3^2} \\\\F_{net} = \frac{1}{9} (kq_1q_2) , \ N[/tex]
Thus, the net electric force acting on a positive test charge at the origin is determined as ¹/₉(kq₁q₂).
Learn more about electric force here: https://brainly.com/question/17692887
#SPJ1
A 1200 kg car traveling at an unknown velocity has a rear-end collision with a 1600 kg car parked in the road. The cars lock bumpers and skid off together at 3.0 m/s. What was the velocity of the 1200 kg car right before the collision?
Answer:
Gotta be it
Explanation:
m1*v1 = m2*v2
1200*v1 = 1600*3
1200*v1 = 4800
v1 = 4800 / 1200
v1 = 4.0 m/s
If in the figure below, the friction between the block and the incline is negligible, (a) how much must the object on the right weigh if the 200-N block is to remain at rest? Ans: 115 N (b) if the system remains at rest when F= 220 N. What are the magnitude and direction of the friction force on the 200-N block? Ans: 105 N down the incline 200 N Fw 35.0⁰
The magnitude of the acceleration and its direction however depends on the resultant force.
What is the resultant force?
In a system of forces, the resultant force is the force that has the same effect in magnitude and direction as all the forces acting together.
In an inclined plane, the friction, weight and applied force all act together on the object. The magnitude of the acceleration and its direction however depends on the resultant force.
This question is incomplete as the diagrams are missing hence the numerical values can not be computed.
Learn more about resultant force:https://brainly.com/question/16380983
#SPJ1
In the early 1960s , Cuban anti-communist rebels with the assistance of the United States . Sought to regain control on Cuba from Fidel Castro . This failed military action was called what?
I NEED HELP WILL MARK YOU BRAINLIEST
Answer:
Here is the answer
Here is the answerExplanation:
Here is the answerExplanation:Bay of Pigs Invasion is the answer
