What does lowercase v represent in this formula?

What Does Lowercase V Represent In This Formula?

Answers

Answer 1
lowercase v = velocity

Related Questions

Complete and balance the nuclear equations for the following fission reactions.
a. 23592U+10n→16062Sm+7230Zn+?10n. Express your answer as a nuclear equation.

b. 23994Pu+10n→14458Ce+?+210n

Answers

Answer:

23592U+10n→14454Xe+9038Sr+210n

Explanation:

a nuclear reaction for the neutron-induced fission of U−235 to form Xe−144 and Sr−90.

How many moles of NiCl2 can be formed in the reaction of 7.00 mol of Ni and 14.0 mol of HCl?

Answers

Answer:

since the concentration of limiting reactant are the same for both nickel and hydrochloric acid, they both will produce the same amount if Nickel Chloride

7 mols of [tex]NiCl_2[/tex] formed in a reaction of 7 mol of Ni and 14 mol of HCl.

The moles of Ni = 7 mol

The mols of HCl = 14 mol

It is required to calculate moles of [tex]NiCl_2[/tex]

What is a mole?

A mole corresponds to the mass of a substance that contains [tex]6.023 \times 10^{23}[/tex]particles of the substance. The mole is the SI unit for the amount of a substance. Its symbol is mol.

The reaction of Ni and HCl occurs as

[tex]Ni +2 HCl \to NiCl_2 + H_2[/tex]

Since the concentration of limiting reactant are the same for both nickel and hydrochloric acid, they both will produce the same amount of Nickel Chloride.

If we have 7 mols of Ni and 14 mols of HCl, then when the 7 moles of Ni has reacted, we will still have 7 moles of HCl unreacted.

So, the moles of [tex]NiCl_2[/tex] formed equal to the moles of Ni and HCl reacted.

Therefore, 7 mols of [tex]NiCl_2[/tex] formed in a reaction of 7 mol of Ni and 14 mol of HCl.

To learn more about moles, click here:

https://brainly.com/question/15209553

Equimolar solutions of A and B are mixed and the reaction is allowed to reach equilibrium. Write down the reactio that correctly describes the relative concentrations at equilibrium?

Answers

Complete Question  

Complete Question is attached below

Answer:

Option A

[tex]D=A[/tex] And [tex]C>A[/tex]

Explanation:

From the question, we are told that:

The Chemical Reaction

 [tex]2A_{aq}+B_{aq} \leftrightarrow 3C_{aq}+2D_{aq}[/tex]

Generally, the equation for Equilibrium constant is mathematically given by

 [tex]K=\frac{C^c*D^d}{A^a*B^b}[/tex]

Therefore

 [tex]K=\frac{C^3*D^d}{A^2*B^b}[/tex]

Hence we conculde

 [tex]D=A[/tex] And [tex]C>A[/tex]

Therefore Option A

The element Co exists in two oxidation states, Co(II) and Co(III), and the ions form many complexes. The rate at which one of the complexes of Co(III) was reduced by Fe(II) in water was measured. Determine the activation energy of the reaction from the following data:

T(K) K(s^-1)
293 0.054
298 0.100

Answers

We measured the Fe(II) reduction of one of the Co(III) complexes by water at a rate of about 0.545 kJ/mol (to three significant figures).

How is activation energy determined?

Calculating a Reaction's Activation Energy A reaction's rate is influenced by the temperature at which it is carried out. The molecules travel more quickly and clash more frequently as the temperature rises. Moreover, the molecules contain greater kinetic energy.

We can use the Arrhenius equation to calculate the reaction's activation energy:

k = A × exp(-Ea/RT)

When the activation energy Ea, the rate constant k, the gas constant R, and the temperature T in Kelvin are all present.

Finding the natural logarithm of the equation's two sides results in:

ln(k) = ln(A) - (Ea/RT)

This equation can be rearranged to take a linear form:

ln(k) = (-Ea/R) × (1/T) + ln(A)

y = mx + b, where (1/T) is x, (-Ea/R) is the slope, and ln(A) is the y-intercept, has the form of a linear equation.

We can get the slope of the line using the given data:

slope = (-Ea/R) = (ln(k2/k1)) / (1/T2 - 1/T1)

where the rate constants for temperatures T1 and T2, respectively, are k1 and k2.

substituting the specified values:

k1 = 0.054s⁻¹ at 293 K

k2 = 0.100s⁻¹ at 298 K

T1 = 293 K

T2 = 298 K

slope = (-Ea/R)

= (ln(0.100/0.054)) / (1/298 - 1/293)

= 65.5 kJ/mol

Therefore, the activation energy of the reaction is:

Ea = slope * R = 65.5 kJ/mol × 8.314 J/mol-K = 545 J/mol

To know more about molecules visit:-

https://brainly.com/question/15532626

#SPJ1

The reaction A + B <-------> C + D has been studied at five widely different temperature and the equilibrium tabulated.
Equilibrium constant K (at varies temperatures)
K at T1 1 x 10^-2
K at T2 2.25
K at T3 1.0
K at T4 81
K at T5 4 x 10^1
Which temperature is the products favored?

Answers

If K is greater than 1, then products are favored

A student was given a solid containing a mixture of nitrate salts. The sample completely dissolved in water, and upon addition of dilute HCl , no precipitate formed. The pH was lowered to about 1 and H2S was bubbled through the solution. No precipitate formed. The pH was adjusted to 8 and H2S was again bubbled in. This time, a precipitate formed. Which compounds might have been present in the unknown?
a. Ca(NO3)2
b. AgNO3
c. Fe(NO3)3
d. Cr(NO3)3
e. Cu(NO3)2
f. KNO3
g. Bi(NO3)2

Answers

Answer:

Fe(NO3)3, Cr(NO3)3, Co(NO3)3

Explanation:

According to the question, no precipitate is observed when HCl was added. This means that we must rule out AgNO3.

Again, the sulphides of Cu^2+, Bi^3+ are soluble in acidic medium but according to the question, the sulphides do not precipitate at low pH hence Cu(NO3)2 and Bi(NO3)3 are both ruled out.

The sulphides of Fe^3+, Cr^3+ and Co^3+ all form precipitate in basic solution hence Fe(NO3)3, Cr(NO3)3, Co(NO3)3 may be present.

The presence of Ca(NO3)2 and KNO3 may be confirmed by flame tests.

If we slowly add a solution of mercury(II) ions to a solution of aqueous halide ions with roughly equal concentrations, a precipitate will form. Explain what the precipitate will consist of initially. g

Answers

Acid rain and it’ll be infection

Water, mercury chloride and nitrogen oxide.

Water, mercury chloride and nitrogen oxide will present in the precipitate when we slowly add a solution of mercury(II) nitrate to a solution of aqueous hydrochloric acid having halide ions both in equal concentrations. The equation of this reaction is Hg2(NO3)2 + 4 HCl ----> 2 HgCl2 + 2 H2O + 2 NO so it is concluded that from this reaction we get precipitate of water, mercury chloride and nitrogen oxide.

https://brainly.com/question/24261598.

The half-life of radon-222 is 3.8 days. How many grams of radon-222 remain
after 15.2 days if the original amount was 6.00 g?
A. 0.750 g
B. 0.375 g
C. 1.20 g
D. 3.00 g

Answers

The mass of radon-222 that will remain after 15.2 days given that it was originally 6 g is 0.375 g (Option B)

What is half life?

This is the time taken for half a substance to decay.

How to determine the number of half-lives that has elapsed

We'll begin our calculation by calculating the number of half-lives that has elapsed after 15.2 days. This is illustrated below:

Half-life (t½) = 3.8 daysTime (t) = 15.2 day Number of half-lives (n) =?

n = t / t½

n = 15.2 / 3.8

n = 4

Thus, 4 half-lives has elapsed.

How to determine the amount remainingOriginal amount (N₀) = 6 gNumber of half-lives (n) = 4Amount remaining (N) = ?

The amount of radon-222 remaining can be obtained as illustrated below:

N = N₀ / 2ⁿ

N = 6 / 2⁴

N = 6 / 16

N = 0.375 g

Thus, the amount of radon-222 remaining after 15.2 days is 0.375 g

Learn more about half life:

https://brainly.com/question/26374513

#SPJ1

What volume of a 1.5 M KOH solution is needed to provide 3.0 moles of KOH?

3.0 L
2.0 L
4.5 L
0.50 L
0.22 L

Please explain!

Answers

Explanation:

here's the answer to your question

2.0 L

Answer:

Solution given:

no. of mole(n)=3.0mole

molarity(M)=1.5M

we have

Volume of a substance is equal to the ratio of its no of mole to its molarity.

By this we get a relation:

Volume=no.of mole/molarity

substituting value

Volume=3.0/1.5=2

The required volume is 2 litre.

how many moles of lithium atoms are contained in 5.2 g of lithium

Answers

Answer:

[tex]\boxed {\boxed {\sf 0.75 \ mol \ Li}}[/tex]

Explanation:

We are asked to convert 5.2 grams of lithium to moles of lithium.

1. Molar Mass

To convert from grams to moles, we need the molar mass. This is the measurement of the mass in 1 mole of a substance. It can be found on the Periodic Table because it is the same value as the atomic mass, but the units are grams per mole instead of atomic mass units.

Look up the molar mass of lithium.

Li: 6.94 g/mol

2. Convert Grams to Moles

Create a ratio using the molar mass of lithium.

[tex]\frac { 6.94 \ g \ Li}{ 1 \ mol \ Li}[/tex]

Multiply by the value we are converting: 5.2 grams of lithium.

[tex]5.2 \ g \ Li *\frac { 6.94 \ g \ Li}{ 1 \ mol \ Li}[/tex]

Flip the ratio so the units of grams of lithium cancel.

[tex]5.2 \ g \ Li *\frac{ 1 \ mol \ Li} { 6.94 \ g \ Li}[/tex]

[tex]5.2 *\frac{ 1 \ mol \ Li} { 6.94 }[/tex]

[tex]\frac{5.2} { 6.94 } \ mol \ LI[/tex]

[tex]0.749279538905 \ mol \ Li[/tex]

3. Round

The original measurement of grams (5.2) has 2 significant figures, so our answer must have the same. For the number we calculated, that is the hundredth place. The 9 in the thousandths place to the right tells us to round the 4 up to a 5.

[tex]0.75 \ mol \ Li[/tex]

5.2 grams of lithium is equal to 0.75 moles of lithium atoms.

What is a litmus solution? How is it obtained?​

Answers

Litmus solution is generally a purple dye. The solution of Litmus is extracted from lichens. The Litmus solution is used as an indicator to determine the acidic and basic nature of a solution.Lichens plants belonging to the class of Thallophyta. The litmus solution method involves the grinding and crushing of lichens. In order to get the desired litmus solution, such dyes are then introduced to neutral water.

What is Bose Einstein state of matter and their examples

Answers

Answer:

A BEC ( Bose - Einstein condensate ) is a state of matter of a dilute gas of bosons cooled to temperatures very close to absolute zero is called BEC.

Examples - Superconductors and superfluids are the two examples of BEC.

Explanation:

What is the difference between elimination and substitution reaction
Identify the key factors that will determine if a reaction undergoes elimination or substitution mechanism.
Use the following reagents to determine the type of reaction pathway expected and determine the products in each reaction.

a. Tert BuO- in tertbutanol and chlorobutane
b. KOH in water and bromobutane
c. NaI in acetone and bromobutane

Write a conclusion of no more than two paragraphs to summarize your results

Answers

Answer:

a) E2

b) SN2

c) SN2

Explanation:

A substitution reaction involves replacement of an atom or group in a molecule by another atom or group. An elimination reaction is the loss of two atoms from the same molecule leading to the formation of a multiple bond in the molecule.

We must note that primary alkyl halides never undergo SN1/E1 reactions. However, the presence of a strong bulky base such as tert BuO- , E2 reactions predominate. In the presence of strong bases such as OH^- and good nucleophiles such as I^-, SN2 mechanism predominates.

5. For Sodium, the Work Function is listed as 2.75 eV but the Ionization Energy is listed as 5.14 eV. Is one of the experiments wrong? Give a possible explanation as to this difference in the minimum energy needed to eject or free an electron from Sodium.

Answers

Answer:

See explanation

Explanation:

The work function of a metal is defined as that minimum energy which is required to remove one electron from the surface of a metal when it is irradiated with a photon of light. The work function is different for different metals.

The ionization energy of a metal is the energy required to remove an electron from an atom. It depends on the position of the electron within the atom.

The work function specifically refers to the energy required to remove an electron from the conduction band of a metal. Hence, the work function is always lower than the ionization energy.

GM 2 all ,What is an atom define it .Good Day​

Answers

Answer:

An atom is the smallest particle of an element that can take part in chemical reaction.

Explanation:

hope it will help u Amri

Write chemical equations for the reactions that occur when solutions of the following substances are mixed:

a. HNO₂ (nitrous acid) and C₂H₇NO (aq) ethanolamine, a base.
b. H₃O+ and F-

Answers

a) HNO₂ + C₂H₇NO → N₂ + C₂H₆O + H₂O

b) H₃O⁺ + F⁻ → HF + H₂O

[tex]\large\color{lime}\boxed{\colorbox{black}{Answer : - }}[/tex]

a) HNO₂ + C₂H₇NO → N₂ + C₂H₆O + H₂O

b) H₃O⁺ + F⁻ → HF + H₂O

Draw the organic product(s) of the following reaction.

NaNH2/ NH3(l)
CH2CH2CH2-Câ¡C -C-H â

Answers

Answer:

H-C = C-H NaNH2 [tex]\ \to \0}[/tex] H-C = CNa

H-C = C - CH2 CH2 CH2 CH3

Explanation:

NaNH2 acts as base in this reaction. The organic products released after the reaction of carbon hydrogen atom with sodium amide. These products released after the chemical reaction when carbon and hydrogen atom reacts and NaNH2 acts as base then substitution nucleophilic reaction takes place.

The Ka for acetic acid (HC2H3O2) is 1.80 x 10-5 . Determine the pH of a 0.0500mol/L acetic acid solution.

I have no idea how to approach this, so If you have the answer for it, please respond as soon as you can

Answers

Answer:

pH = 3.02

Explanation:

Acetic Acid is a weak acid (HOAc) that ionizes only ~1.5% as follows:

HOAc ⇄ H⁺ + OAc⁻.

In pure water the hydronium ion concentration [H⁺] equals the acetate ion concentration [OAc⁻] and can be determined* using the formula [H⁺] = [OAc⁻] = SqrRt(Ka·[acid]) = SqrRt(1.8x10⁻⁵ x 0.0500)M = 9.5x10⁻⁴M.

By definition, pH = -log[H⁺] = -log(9.5x10⁻⁴) = 3.02

______________________________________________________

*This formula can be used to determine the [H⁺] & [Anion⁻] concentrations for any weak acid in pure water given its Ka-value and the molar concentration of acid in solution.

Determine the highest level of protein structure described by each item.

a. Primary structure
b. Secondary structure
c. Tertiary structure
d. Quaternary structure

1. order of amino acids
2. overall macromolecule structure containing more than one polypeptide chain

Answers

From each of the protein structures listed, the option with the highest level of protein structure as regards with order of amino acids and overall macromolecule structure is quaternary structure. That is option D.

The protein one of the essential nutrients that is found in and consumed by mammals.

There are different types of proteins and their functions depends on their shape, structure or conformation.

The structure of proteins include:

Primary structure: This is the simplest shape of proteins. This is because, the amino acids of a polypeptide is arranged in a linear form.

Secondary structure: This is the local folded structures that form within a polypeptide due to interactions between atoms of the backbone.

Tertiary structure: These are three dimensional structures of proteins that occurs as a result of the interactions between the R groups of the amino acids that make up the protein.

Quaternary structure: This protein structure contains multiple polypeptide chains also called subunits.

Therefore, the option with the highest level of protein structure as regards with order of amino acids and overall macromolecule structure is quaternary structure.

Learn more here:

https://brainly.com/question/18159696

Adding more than one equivalent of HCl to pent-1-yne will lead to which product:______.
a. 1,2-dichloro-1-butene.
b. 1,1-dichloropentane.
c. 2,2-dichloropentane.
d. 2,2-dichlorobutane.

Answers

Answer:

c. 2,2-dichloropentane.

Explanation:

Hello there!

In this case, according to the given information, it turns out possible for us to firstly draw the structure of the reactant, pent-1-yne:

[tex]CH\equiv C-CH_2-CH_2-CH_2[/tex]

Now, we infer the halogen is added to the carbon atom with the most carbon atoms next to it, in this case, carbon #2, in order to write the following product:

[tex]CH\equiv C-CH_2-CH_2-CH_2+2HCl\rightarrow CH_3- CCl_2-CH_2-CH_2-CH_2[/tex]

Whose name is 2,2-dichloropentane.

Regards!

A strawberry nutritional drink used for a liquid diet is flavored with methyl butanoate. Draw the structure of methyl butanoate.

Answers

Answer:

See explanation and image attached

Explanation:

Methyl butanoate is an ester. Esters have the general molecular formula, RCOOR where the two Rs may represent the same or different alkyl groups.

Methyl butanoate is has a fruity odor, smelling like apples or pineapples fragrance. It is also called methyl butyrate.

The structure of the compound is shown in the image attached to this answer.

Determine the number of atoms of O in 60.1 moles of Fe₂(SO₃)₃.

Answers

Answer:

3.310308*10^26

Explanation:

nO=9nFe2(SO3)3=9*60.1=540.9 moles

number of atoms: 540.9*6.02*10^23

The mass of an empty flask plus stopper is 64.232g. When the flask is completely filled with water the new mass is 153.617 g. The flask is emptied and dried, and a piece of metal is added. The mass of the flask, stopper and metal is 143.557. Next, water is added to the flask containing the metal and the mass is found to be 226.196. What is the density of the metal

Answers

Answer:

11.76 g/cm^3

Explanation:

Mass of empty flask and stopper = 64.232g

Mass of flask filled with water = 153.617 g

Mass of water = 153.617 g - 64.232g = 89.385 g

Mass of flask, stopper and metal = 143.557 g

Mass of metal = 143.557 g - 64.232g = 79.325 g

Mass of water, flask, stopper and metal = 226.196 g

Mass of water = 226.196 g - 143.557 g = 82.639 g

Since mass of water =volume of water

Volume occupied by metal = 89.385 cm^3 - 82.639 cm^3 = 6.746 cm^3

Density of metal = mass/volume = 79.325 g/6.746 cm^3

= 11.76 g/cm^3

Kevin's supervisor, Jill, has asked for an update on today's sales, Jill is pretty busy moving back and forth between different store locations. How can Kevin most effectively deliver an update to her ? a) Call with a quick update Ob ) Send a detailed text message c ) Book a one-hour meeting for tomorrow morning d) Send a detailed email

Answers

Answer:

d

Explanation:

since it is much convenient since the email will not get lost and it's contents will not be forgotten

3 attempts left Be sure to answer all parts. Which indicators that would be suitable for each of the following titrations: (a) CH3NH2 with HBr thymol blue bromophenol blue methyl orange methyl red chlorophenol blue bromothymol blue cresol red phenolphthalein (b) HNO3 with NaOH thymol blue bromophenol blue methyl orange methyl red chlorophenol blue bromothymol blue cresol red phenolphthalein (c) HNO2 with KOH thymol blue bromophenol blue methyl orange methyl red chlorophenol blue bromothymol blue cresol red phenolphthalein

Answers

An indicator usually signals the endpoint of a neutralization reaction by undergoing a color change. They aid in discovering the point of equivalence of a titration.

The kind of indicator used depends on the nature of acid/base reacted.

In the case of  CH3NH2 with HBr which  strong acid and weak base titration, suitable indicators include; bromophenol blue, methyl  orange, methyl red, and chlorophenol blue.

In the case of HNO3 with NaOH, this is a strong acid, strong base titration hence phenolphthalein, methyl red, chlorophenol, and bromothymol blue cresol red blue are suitable indicators.

In the case of  HNO2 with KOH, this a weak acid, strong base titration and the suitable indicators are cresol red and  phenolphthalein.  

For more information on titration see

https://brainly.com/question/22536636

Which substance would be the most soluble in gasoline?
Select one:
A. hexane
B. NaNO3
C. HCI
D. water
E. Nacl

Answers

I think the answer most be d

In chemistry like dissolves like hence hexane will dissolve in gasoline.

Dissolution stems from intermolecular interaction between solute and solvent molecules.

If this interaction can not occur, dissolution of one substance in another is impossible.

Hexane dissolves in gasoline because the both substances are non-polar and can interact with each other effectively.

Learn more: https://brainly.com/question/2459213

Which technique would be best for separating sand and water?

A. filtration
B. distillation
C. chromatography
D. evaporation​

Answers

Answer:

A. filtration

Hope it helps

which of the following measurements is equivalent to 5.461x10^-7m?

Answers

Answer:

B. 0.0000005461m

I used the method of moving the decimal.

Give the IUPAC and common name

Answers

Answer:

IUPAC Name:

N-ethyl-N-methylaniline

Common Name:

Benzenamine

Suppose a 0.034 M aqueous solution of sulfuric acid (H2SO4) is prepared. Calculate the equilibrium molarity of SO4 You'll find information on the properties of sulfuric acid in the ALEKS Data resource. Round your answer to 2 significant digits.

Answers

Answer:

[SO4²⁻] = 0.015M

Explanation:

When H2SO4 is dissolved in water, HSO4- is produced in a direct reaction as follows:

H2SO4 → HSO4- + H+

As 1 mole of H2SO4 produce 1 mole of HSO4-, the molarity of HSO4- in this first reaction is 0.034M

Now, the HSO4- is in equilibrium with SO42- and H+ as follows:

HSO4⁻ ⇄ SO4²⁻ + H⁺

Where the equilibrium constant, K, is defined as:

K = 1.2x10⁻² = [SO4²⁻] [H⁺] / [HSO4⁻]

Where [] are the equilibrium concentrations of each species in the reaction.

The equilibrium concentrations are:

[SO4²⁻] = X

[H⁺] = X

[HSO4⁻] = 0.034M - X

Where X is reaction coordinate

Replacing:

1.2x10⁻² = [X] [X] / [0.034-X]

4.08x10⁻⁴ - 1.2x10⁻²X = X²

4.08x10⁻⁴ - 1.2x10⁻²X - X² = 0

Solving for X:

X = -0.027M. False solution, there are no negative concentrations.

X = 0.015M. Right solution.

That means the equilibrium molarity of SO4²⁻,

[SO4²⁻] = X

[SO4²⁻] = 0.015M

Other Questions
Which animal is found in the desert?monkeysparrotsbuffalomeerkats Dates of the Ottoman Empire's beginning, height, decline, and end The fraction Three-tenths is the difference of Eight-tenths and which fraction? Write an equation in point-slope form of the linethat passes through the points (5. 1) and(-6,-4). Spontaneous financing refers solve one step equationx + 8 = -10 Help? If im given the option ill give you brainliest! list the levels of organization of that make up an organism, starting with an atom and ending with an organism 23. O deadly sin! O rude unthankfulness The figure of speech dominant in the above who was the first person killed in the boston massacre Which problem would you use the following proportion to solve for?24/x = 40/100A. What is 40% of 24?B. Twenty-four is 40% of what number?C. What percent is 24 of 40?D. Forty percent of 24 is what number? 2 How did the Treaty of Versailles contribute to World War II? A. Hitler resented the restrictions it placed on Germany and wanted to restore the countrys power. B. Hitler refused to pay the war reparations, which led to bad relations with France. C. Hitler took advantage of its terms to take over Czechoslovakia and consider further expansion. D. Hitler became victorious because the treaty allowed him to annex Sudetenland. PLEASE HELP WORTH 50 POINTS! In five (5) sentences, explain the connection of Natural Moral Law and useand existence of conscience.pls helpp meh :{ Determine the kinetic energy of a 625-kg roller coaster car that is moving with a speed of 10 m/s. I wake up the computer and remind it what to do 9. When a scientist makes a proposal of a cause-and-effect relationship between two variables, thisstatement is called aa. Conclusion.O b. Fair testC. TheoryO d. Hypothesis Define Hell . Give two examples What were some causes and effects of Pontiacs rebellion GUYS PLEASE HELP ME ON THIS ONE!, i will give brainliest to the right answersAisha has $40 to spend for her ornithology club. She spends some of it buying birdseed and saves the rest. Her savings is given by f(x)=401.25x, where x is the number of pounds of birdseed she buys at $1.25 per pound.