what happens to the matter in water as it evaporates
Answer:
It changes from a liquid to a gas. I hope this helps you! :D
can anyone heelp me pls
Answer:
lotion 2. capsule 3. suspension 1.
how many gallons in one cubic foot?
Answer:
1cf gallon=7.481 us liquid gallon
Is water wet? Why or why not
Answer: umm, yes? DUH
Explanation: touch some falling out of a tap
Answer:
Water is wet,
Explanation:
in the sense of being a liquid which flows easily, because its viscosity is low, which is because its molecules are rather loosely joined together. So it is wet.
When 3.93 grams of lactic acid, CHoOs(s), are burned in a bomb
calorimeter that has a total heat capacity of 10.80 kJ-K-1, the
temperature of the calorimeter increases by 5.43 K. Assume AHrxn
=
AErxn. Given that AH°f of H¿O(I) = -285.8 kJ-mol-1 and AH°f of CO:(g)
= -393.5 kJ• mol-1, calculate the AH°f of lactic acid.
The heat released in the combustion of lactic acid is absorbed by the
calorimeter and in the decomposition of the lactic acid.
ΔH°f of lactic acid is approximately -716.2 kJ
Reasons:
Known parameters are;
Mass of the lactic acid = 3.93 grams
Heat capacity of the bomb calorimeter = 10.80 kJ·K⁻¹
Change in temperature of the calorimeter, ΔT = 5.34 K
ΔHrxn = ΔErxn
ΔH°f of H₂O(l) = -285.8 kJ·mol⁻¹
ΔH°f of CO₂(g) = -393.5 kJ·mol⁻¹
The chemical equation for the reaction is presented as follows;
C₃H₆O₃ + 2O₂ → 3CO₂ + 3H₂OThe heat of the reaction = 10.80 kJ·K⁻¹ × 5.34 K = 57.672 kJ
Molar mass of C₃H₆O₃ = 90.07 g/mol
Number of moles of C₃H₆O₃ = [tex]\dfrac{3.93 \, g}{90.07 \, g/mol}[/tex] = 0.043633 moles
Number of moles of CO₂ produced = 3 × 0.043633 moles = 0.130899 moles
Heat produced = 0.130899 mole × -285.8 kJ·mol⁻¹ = -37.4109342 kJ
Moles of H₂O produced = 0.130899 moles
Heat produced = 0.130899 mole × -393.5 ≈ -51.51 kJ
Therefore, we have;
Heat absorbed by the lactic acid = ΔH°f of H₂O + ΔH°f of CO₂ + Heat absorbed by the calorimeter
Which gives;
Heat absorbed by lactic acid = -37.4109342 kJ - 51.51 kJ + 57.672 kJ ≈ -31.249 kJ
The heat absorbed by the lactic acid ≈ -31.249 kJ
[tex]\Delta H^{\circ}f \ of \ C_3H_6O_3 = \dfrac{-31.249}{0.043633} \approx -716.2[/tex]
ΔH°f of C₃H₆O₃ ≈ -716.2 kJ
Heat of formation of lactic acid ≈ -716.2 kJ.
Learn more here:
https://brainly.com/question/13185938
You and your family have just arrived in Water Cycle Land. You are going on a new ride called the Water Cycle. You sit in your seat and the ride begins. All of a sudden something goes wrong. Your body is turning into a water droplet! Think about what you have learned about the water cycle. Now tell a story about what happens to you as you travel through the water cycle. By the way, how do you get your body back to normal?
Answer: you dont drink water for years
Explanation: dont drink water for years on end
explain the role of sulphuric acid in limit test for iron
. Why does the element with the higher atomic number have a lower ionization energy than the element with the lower atomic number?
Answer:
first ionization energy is the amount of energy required to remove an electron from isolated gaseous atom
so when atomic no increase across aperiod the ionization energy become lower
it's my opinion am not sure ok
Câu 15: Nguyên tử X nặng gấp 2 lần nguyên tử cacbon. Nguyên tử X đó có nguyên tử khối và
kí hiệu hóa học là
A. 24_Mg. B. 16_O C. 56_Fe D. 32_S
Answer:
A
Explanation:
3. Compare What is the
difference between a
chromosome and a
chromatid?
(Please answer in a simple sentence)
Answer:
A chromosome is a thread-like structure present in the nucleus that is made up of a single molecule of DNA and proteins, carrying some or all genetic materials of an organism. A chromatid is an identical half of a duplicated chromosome
Explanation:
28.5 g of iron shot is added to a graduated cylinder containing 45.50 mL of water. The water level rises to the 49.10 mL mark. From this information, calculate the density of iron.
HELLPPP CAN SOMEONE SOLVE THIS???
Answer:
Density if iron shot = 7.92 g/ml (2 sig. figs.)
Explanation:
By definition, density is mass per unit volume. That is,
Density (D) = mass(m)/Volume(V)
mass(m) = 28.5g (given)
Volume(V, of iron shot) = 49.10ml - 45.5ml = 3.6ml
Substitutuing into D = m/V = 28.5g/3.6ml = 7.9166667 g/ml (calc.ans)
≅ 7.92 g/ml (2 sig. figs.)
Hope this helps. :-)
Compost from vegetable peelings can be used as plant fertilizer. * a. reduce b. resuse c. recycle d. recover
Answer:
Is letter B
Explanation:
Hope it helps :))
If the number of neutrons in the nucleus of the atom is 41, and the atomic number is 40, what is the mass number of that atom
If the number of neutrons in the nucleus of the atom is 41, and the atomic number is 40, the mass number of that atom will be 81
What is mass number?Mass number is the sum of the number of protons which is the atomic number and neutrons of an atom.
It is represented using the letter ‘A.’
How to calculate the mass numberMass number = atomic number + neutrons
We have the atomic number as 40 and the number of neutrons as 41
The mass number = 40 + 41 = 81
Therefore, the mass number of the atom will be 81
Learn more about mass number here:
https://brainly.com/question/1805828
Calculate the change in enthalpy for the following reaction:
4 HCl (g) + O2 (g) → 2 H20 (g) + 2 Cl2 (g)
I will mark brainliest.
(I don't need an explanation. I just want to double check my worksheet answers.)
Answer:13hct
Explanation:
5. Calculate the mass percent of carbon in C3H8
Answer: How to calculate the mass percent by using these instructions
1.The molar mass is the mass of a given chemical element or chemical compound (g) divided by the amount of substance (mol).
2.The molar mass of a compound can be calculated by adding the standard atomic masses (in g/mol) of the constituent atoms.
Explanation:
What is the formula to calculate heat energy required to raise the temperature of any substance?
Answer:
[tex]\huge \dag \sf{Specific \: Heat}[/tex]
Specific Heat is the quantity of heat required to raise the temperature of one gram of a substance by one Celsius degree.Specific heat is a characteristic property that measures how much energy it takes to raise the temperature 1 gram of a material 1°C.
[tex]\huge\bold\red{Formula}[/tex]
mass x specific heat x change of temperature
Or,
c = Q / (mΔT)
[tex]\Large\textsf{Hope \: It \: Helped}[/tex]
[tex]{\blue{Formula}}[/tex]
The formula for specific heat is the amount of heat absorbed or released = mass x specific heat x change in temperature.
[tex]{\green{explanation}}[/tex]
Specific heat is the amount of heat required to raise one gram of any substance one degree Celsius or Kelvin.
What is the CATHODE half-reaction for the cell
Cu(s)—> Cu2+ (aq)||Ag+ (aq)|Ag(s)?
Answer:
Ag/Ag+ electrode is cathode and Cu/Cu+ electrode is anode.
~im not sure it its correct i found it~
Explanation:
If the sample has a density of 2.71 g/cm3 , how many oxygen atoms does it contain?
Answer:
djxgfchkgvjhbkjlnk:Hg/ufy
Explanation:
fzdxgfchg,jv.hkbjnj.jhcgbc
When excess potassium hydroxide and H2SeO3 react whats the net ionic reaction for the acid-base rxn
The required net ionic equation is; 2H^+(aq) + 2OH^-(aq)-----> 2H2O(l)
The molecular reaction equation is;
H2SeO3(aq) + 2KOH(aq) -----> K2SeO3(aq) + 2H2O(l)
The complete ionic equation is;
2H^+(aq) + SeO3^2-(aq) + 2K^+(aq) + 2OH^-(aq)-----> 2K^+(aq) + SeO3^2-(aq) + 2H2O(l)
Net ionic equation;
2H^+(aq) + 2OH^-(aq)-----> 2H2O(l)
We can clearly see that this is a neutralization reaction hence water is the product of the net ionic equation.
Learn more:https://brainly.com/question/25150590
A line can be used to represent a covalent bond between two atoms. Diagram pairs of atoms
that can form single, double, and triple bonds.
Can every atom form each of these kinds of bonds?
The covalent bond has been formed by the atom with the difference in the electronegativities and the presence of loan pair for an unsaturated bond.
The covalent bond has been formed between the atoms when there has been the sharing of electrons. The presence of loan pairs results in the formation of pi bonds, which are unsaturated covalent sharing formed above or below the covalent bonds.
An example of pair with a single bond has been:
H-HO-OThe examples of pairs with double bonds:
HHC=CHHC=OThe examples of pairs with triple bonds:
N [tex]\equiv[/tex] NHC [tex]\equiv[/tex] CHNot every atom can form these bonds as there has been the presence of loan pairs with the atom for the formation of the double and triple bond.
For more information about the covalent bond, refer to the link:
https://brainly.com/question/10777799
How many milligrams are in 2.89 x 1024 CO2 molecules?
Answer:
2,959.36
Explanation:
There are 2959.36 milligrams present in 2.89 x [tex]10^{24}[/tex] CO2 molecules.
What is molecule?The smallest component of a substance which possesses both its chemical as well as physical characteristics. One or even more atoms make up molecules.
What is milligrams?Such a measure of mass as well as weight that weighs 0.0154 grains or one-thousandth of a gram.
Calculation of milligram in CO2 molecule.
Mass = No. of molecule / molar mass.
Molar mass = 44.02 g/mol.
Mass = 2.89 x [tex]10^{24}[/tex] /[tex]6.023 * 10^{23}[/tex]× 44.02 g/mol.
Mass = 2959.36 milligrams
To know more about molecule and milligram.
https://brainly.com/question/19922822
#SPJ3
Please help XD answer all of these questions to get 70 pnts!
Answer:
1 Density- degree of consistency measured by the quantity of mass per unit volume.
2 Cubic centimeters
3 Volume- Volume is the amount of space occupied by a substance, while mass is the amount of matter it contains. The amount of mass per unit of volume is a sample's density.
4 Liters
5 Mass- Scientific Definition of Mass Mass is the quantity of inertia (resistance to acceleration) possessed by an object or the proportion between force and acceleration referred to in Newton's Second Law of Motion (force equals mass times acceleration). In other words, the more mass an object has, the more force it takes to get it moving.
Explanation:
Answer:
What is density? The measure of how much matter is in a certain volume.
Which one of these are not a unit of volume? Answer: m² is not a unit of volume.
What is Volume? The length of an object.
Which of these is not a unit of mass? Metric ton (t)
What is mass?A measure of the amount of matter in an object or substance.
Pure iron, Fe , can be produced from an ore called hematite, Fe2O3 , by reaction with carbon at high temperatures. 2Fe2O3+3C⟶4Fe+3CO2 How many tons of hematite must react with carbon if an iron company needs to make 49 tons of iron?
70 tons of hematite (Fe₂O₃) is needed to produce 49 tons of iron (Fe).
We'll begin by calculating the tons of hematite (Fe₂O₃) that reacted and the tons of Fe produced from the balanced equation. This is illustrated below:
2Fe₂O₃ + 3C —> 4Fe + 3CO₂
Molar mass of Fe₂O₃ = (56×2) + (16×3) = 160 g/mol
Mass of Fe₂O₃ from the balanced equation = 2 × 160 = 320 g
Divide by 907185 to express in ton
320 / 907185 = 0.000353 ton
Molar mass of Fe = 56 g/mol
Mass of Fe from the balanced equation = 56 × 4 = 224 g
Divide by 907185 to express in ton
224 / 907185 = 0.000247 ton
SUMMARYFrom the balanced equation above,
0.000353 ton of Fe₂O₃ reacted to produce 0.000247 ton of Fe.
Finally, we shall determine the tons of hematite (Fe₂O₃) needed to produce 49 tons of Fe. This can be obtained as follow:
From the balanced equation above,
0.000353 ton of Fe₂O₃ reacted to produce 0.000247 ton of Fe.
Therefore,
X ton of Fe₂O₃ will react to produce 49 tons of Fe i.e
X ton of Fe₂O₃ = [tex]\frac{0.000353 * 49}{0.000247} \\\\[/tex]
X ton of Fe₂O₃ = 70 tons
Thus, 70 tons of hematite (Fe₂O₃) is needed to produce 49 tons of Fe.
Learn more: https://brainly.com/question/15343472
What is the volume of water needed to prepare 5000 ml of 0.1 M HCL from a stock solution of4 M
e) 125 ml
b) 375 ml
c) 500 ml
d) none of them
Hey There :
Volume initial = ?
Volume final = 5000 mL
Molarity initial = 4 M
Molarity final = 0.1 M
Therefore :
Mi * Vi = Mf * Vf
4 * vi = 0.1 * 5000
4 vi = 500
Vi = 500 / 4
Vi = 125 mL
Answer A
Hope this helps!
Using the standardized NaOH solution in the previous
question, the titration of 5.00 mL of vinegar required
42.25 mL of NaOH. What is the % of acetic acid in the
vinegar? Previous standardized NaOH solution = 0.098
Answer: Using the standardized NaOH solution in the previous question, the titration of 5.00 mL of vinegar required 42.25 mL of NaOH. What is the % of acetic acid in the vinegar? Concentration of NaOH from previous question= 0.0986 M. David C.
Explanation:
Please mark as brainliest for me.Thank you so much
The percentage of acetic acid in vinegar is 4.988 %., When the titration of 5.00 mL of vinegar required 42.25 mL of NaOH.
What is titration?Titration is defined as the process of chemical analysis method in which the amount of a sample's constituent is determined by mixing a precisely measured amount of the desired constituent with another material in a precise, known proportion. The equivalence point, or the point at which chemically equivalent amounts of the reactants have been combined, is to be detected by the titration.
According to the titration principle, V1=the volume of acetic acid and V1S1=V2S2
S1 is the acetic acid's strength
V1 = 42.25 ml * 0.0986 M / 5 ml = 0.833 M where V2 = Volume of NaOH S2 = Strength of NaOH
Hence, 1000 ml Vinegar contains 0.833 moles of acetic acid per 100 ml of vinegar (0.0833*60). G=4.998 grams of acetic acid
The amount of acetic acid in vinegar is 4.988%.
Thus, the percentage of acetic acid in vinegar is 4.988 %., When the titration of 5.00 mL of vinegar required 42.25 mL of NaOH.
To learn more about titration, refer to the link below:
https://brainly.com/question/2728613
#SPJ2
What is the lead concentration of a saturated solution of lead(II) sulfate containing 0.020 M Na2SO4? Ksp for PbSO4 = 6.3x10-7.
Answer:
i want to help but i d k. the answer :( sorry i couldnt help
Explanation:
What elements are in H2F5BLi and how many atoms are in each element.
20 point plus brainliest
Answer:
2 hydrogen
5 fluorine
1 boron
1 lithium
If 5.0g nitrogen dioxide completed reacted, how many grams of nitric acid would form?
Answer:
71847284737283774737373737
helpppppppppppppppppppppppppppp
Answer:
condensationExplanation:
Condensation is a process in which the evaporated liquid substance such as water vapor gets turned back to its liquid form water.
So, condensation is the process in which water vapor changes to liquid .Please for real help me, show work !
Answer:
27)
a. Silver nitrate
b. Lead chromate
c. Anhydrous magnesium acetate
d. Copper nitrate
28) a. KNo3
