Answer:
55 mph
Explanation:
Stripping tools designed for solid wire cannot be used on stranded wire. Why?
Answer:
One reason why stripping tool designed for use with solid wire cannot be used on stranded wire is that the diameter of a stranded wire is larger than the diameter of a solid wire of the same gauge.
Therefore, a tool for stripping a 8-gauge solid wire cannot be used for stripping a 8-gauge stranded wire as the diameter of an American Wire Gauge, AWG 8-guage solid wire (0.129 inches in diameter) is smaller than the diameter of an AWG 8-gauge stranded wire (0.152 inches in diameter)
Explanation:
What are the inputs, outputs and side effects of a PSP
Which of the following would NOT be an enforcement responsibility of a local police officer?
federal statute
local ordinance
state law
international trade agreement
Answer:
D
Explanation:
A picture of a ______ is the label pictogram on a chemical that warns of a product's acute toxicity.
Reverse Engineering: Structural Analysis
As you may already know, engineers like to take things apart! By exploring the inner mechanisms of a device, engineers gain valuable information about the structure and function of each component. Typically, an engineer completes three separate analyses during the reverse engineering process. A visual analysis allows the engineer to describe the object using visual design elements and principles. A functional analysis explores the operations of each component and their interactions to provide further information about an object's purpose and design. Finally, a structural analysis provides information about the organization, materials, and manufacturing methods used to create an object. Reverse engineering is a detailed, sequential process that engineers use carefully to ensure that a dismantled object can be reconstructed fully again.
In this lesson, you will learn the purpose and technique of a structural analysis. Additionally, you will learn about a morphological matrix that ties the function of a product with its structure. Along with the Product Teardown Chart, the documentation used in reverse engineering tracks all information gathered during the process to enable engineers to make valid, reasoned judgments about the product. By the end of the lesson, you will learn how to carefully dismantle an object while analyzing the structure of each component, as engineers do during the reverse engineering process.
Objectives
Practice reverse engineering techniques and apply them to a design.
Determine the goals of reverse engineering of a product.
Define and understand the structural requirements of a design.
Explore a career in computer engineering.
Vocabulary
exploded view
a detailed diagram that shows all parts of an object removed from the base structure and connected by dotted lines to show where the components should fit together
morphological matrix
concept generation table; allows an engineer to analyze structure and function of each parameter as well as to determine cross-functionality
(essay)
Answer:
Reverse engineering is taking apart an object to see how it works in order to duplicate or enhance the object. The practice, taken from older industries, is now frequently used on computer hardware and software.
Explanation:
Answer:
Reverse engineering is taking apart an object to see how it works in order to duplicate or enhance the object. The practice, taken from older industries, is now frequently used on computer hardware and software.
Explanation:
How does osha enforce it standards
Help me is it a b c or d?
b is the correct answer of this question
A set of communication rules for the computer to follow is called:
Packet
Protocol
Router
IP address
ILL MARK BRAINLEST JUST HELP PLS :(
Answer:
Protocol
Explanation:
Answer:
ip is t what you go to than the protocol is what you half to follow you need a router and
Voltage drop testing is being discussed.
Technician A connects the red voltmeter lead to the most positive side of the circuit being tested and the black lead to the most negative side or part of the circuit being tested. Technician B says the test must be conducted with the circuit operating with normal amounts of current. Who is correct?
Answer:
Technician B only is correct
Explanation:
Voltage drop testing is a method used to find the amount of electrical resistance available in an high amperage circuit that involves connecting the leads of the meter in parallel to the circuits being tested such that disassembly is not required
In voltage drop test, the red voltmeter lead and black voltmeter lead are placed at two points on the same side of the circuit connection such that the leads are in between two positive connection or two negative connection (rather than connecting the red to the positive and the black to the negative sides of the circuit) and digital voltmeter is used for the voltage drop measurement across the lead while the connection is under load.
Therefore, Technician B only is correct
Which of the following justifies the need for an already-certified engineer to continue to take classes?
A. federal regulations are likely to be legislated, so an already-certified engineer needs to become informed.
B. New developments in sustainability are likely to occur, so an already-certified engineer needs to keep knowledge current.
C. New engineering certification is required, so an already-certified engineer needs to maintain this licensing.
D. New local regulations are likely to be legislated, so an already-certified engineer needs to become informed.
Answer:
I think it would c option
In architectural drawings, what do architects use to convey exact details about various parts of a drawing without leaving any scope for misinterpretation?
Answer:
Architects use reference marks
Explanation:
Technician A says that adhesion promoters may be used on fiber-reinforced plastics. Technician B says that some plastic repair material can be used to fill minor scratches. Who is right
Answer:
233
Explanation:
I dont know
Why would someone use a 6- or 8-rotor aircraft instead of a quadcopter?
Answer:
GREATER LIFT CAPACITY AND STABILITY
Explanation:
Are materials that are good conductors of thermal energy also good conductors of electrical energy?
Which permission do you need to shoot on the owner’s property?
A.
performance right
B.
filming permit
C.
synchronization right
D.
location release
E.
copyright
Answer:
filming permit,
( MARK ME BRAINLIEST!!)
Select the correct answer
Ben works in the quality assurance department of a fabric manufacturing company. His supervisor asks him to check if the tensile strength of a batch is within allowable
values. Which quality engineering aspect will guide Bento do this task?
OA. Specifications
OB. specification limits
Oc. nonconformity
OD. product variability
What is the answer to -43+2x+7x*43
Explanation:
here you go. the answer is 303x+4
Which is not required when working in a manufacturing facility?
O a. closed toe shoes
b. hard hat
c. flip flops
d. eye protection
Based on the scenario, which type of engineering identifies Greg's role in Ethiopia?
Greg is currently working in Ethiopia to assist a village in creating a healthier living environment, which includes
conserving resources and designing a clean water system in order to make a positive environmental impact.
green engineering
eco-friendly engineering
industrial engineering
sustainable design engineering
Answer: sustainable design engineering
Explanation:
Based on the scenario, the type of engineering that identifies Greg's role in Ethiopia is referred to as sustainable design engineering.
Sustainable engineering is referred to as the process of designing systems or operating them in such a way that the resources and energy are utilized sustainably and conserving them so that the natural environment will not be compromised and such resources will be available for the future generations.
What is engineering
Can u plz do one in your mind thanks.
Answer:
Engineering is the job of making or fixing things most often that are motorized.
Explanation:
What is 1 + 5 + 4 - 5 + 4 +1 ??
Answer: 10
Explanation:
Answer:
10
Explanation:
A wheelbarrow is used to lift a 200 lb loadThe length from the wheel axle to the center of the load is 2ft the
length from the wheel and axle to the effort is 4.5 What is the ideal mechanical advantage
Calculate:
Ideal Mechanical Advantage (IMA)
IMA= Distance(effort force)/Distance(resistant force)
IMA= 5 feet/ 2 feet
IMA= 2.5
3. Static Equilibrium Calculations:
FE= Force of Effort Force
M= moment (Force x distance)
Moment Effort + Moment Resistance
∑ MFulcrum= 0
(200lbs)(2ft) + (5ft)(FE)= 0
5ft (FE) = 400 lbs/ft
FE= 80 lbs
First Drop Down Options -
-(engineering has affected technology)
-(science has affected technology)
-(technology has affected engineering)
Second Drop Down Options
-(polluting the environment)
-(causing accidents result in loss of life)
-(impeding further technological development)
Answer:
The correct answers are;
1) Technology has affected engineering
2) Polluting the environment
Explanation:
1) A technology converts scientific know into practical use or application which is very commonly applied in industry
The technology of the internal combustion engine makes use of scientific knowledge such as the chemistry of combustion reaction Avogadro's Law of combining volumes, Boyles Law, Pressure, Force, Area Distance, and Work relationships, and conversion of energy principles to convert the energy in organic chemicals contained in petroleum fuels into work for driving machines
2) The products of the combustion of internal combustion engines are;
a) Nitrogen oxides which are health hazards
b) Sulfur oxides which stimulates acid rain
c) Particulate Matter which can cause cardiovascular complications, asthma, and premature death
The above products are pollutant which affect the environment and the inhabitants of a location
Therefore, we have;
The use of internal combustion engines to power flight in planes is an example of how technology has affected engineering
The use of such technology in the transport sector can also have a negative effect by polluting the environment.
The purpose of hazard lights is to _____.
Answer:
Your hazard lights warn other drivers of an emergency situation you may be encountering. All four turn signal lights come on when you activate your hazard lights.
Explanation:
on the internet.
Answer: show other drivers that your vehicle is disabled
Explanation: The purpose of hazard lights is to show others that your vehicle is disabled. Only use your hazard lights once you are safely pulled over and stopped.
Another name for your computer, running the web browser program is: Web user The client The mainframe Browsing agent
HELP PLS ILL MARK BRAINLEST
Answer:
Browsing agent
Explanation:
Hope this helps!
Based on the following passage on construction technology during the Middle Ages, why might a worker not be allowed
to join a guild?
During the Middle Ages, a family worked in a trade for generations, with fathers training sons and passing knowledge
along bloodlines. Masons learned how to carve elaborate gargoyles; glazlers made intricate stained-glass windows.
These skilled workers were organized Into guilds, and on a construction site, guild workers were highly esteemed while
lower-level unskilled workers completed simple routine tasks. All laborers were paid.
Answer:
A guild are an association of skilled merchants, craftsmen and artisans that provide support and protection for their members and push their professional interest forward and further their craft
Because the guild guild members mainly gained their skill through knowledge passed to them by their family bloodlines, other unskilled workers were by not being schooled on the craft and by family tradition not allowed to join a guild based on the nature knowledge transfer the guild members have which is mainly several generations of family trade trainings
Explanation:
Answer:
He was not born into a family of skilled laborers
Explanation:
Which of the following distinguishes the importance of engineering to the field of sports biomechanics?
-Engineering concepts provide the mathematics foundation for biomechanics.
-Engineering courses help students understand how to improve the design of sports facilities.
-Engineering courses help students understand how to design sports equipment.
-Engineering concepts provide an understanding of the mechanics of the body.
how does the turbo on a car work?
Answer:
the exaust of the car spins an impeller in the turbo which causes the turbo o force air into the motor wala more power
Explanation:
Need help with this question pls help me will mark brainiest.
Question 9 (1 point)
All high-temperature limit switches have automatic reset.
True
O False
Answer:
This statement is True.
Explanation:
An open system doesn't have automatic water makeup (pressure reducing valve).
