The electrostatic force between these electrons will be 2.3×10⁻²⁰ N.
What is Columb's law?The force of attraction between two charges, according to Coulomb's law, is directly proportional to the product of the charges and inversely proportional to the square of the distance between them.
Charges that are similar repel each other, whereas charges that are diametrically opposed attract each other.
They will repel, moving in opposite directions at the same speed. Because the magnitude and nature of the charge are same.
The electrostatic force between these electrons is;
[tex]\rm F= \frac{Kq_1q_2}{r^2} \\\\ F=\frac{9 \times 10^9 \times -1.6 \times 10^{-19} \times- 1.6 \times 10^{-19} }{(0.10 \times 10^-3)^2} \\\\F= 2.3 \times 10^{-20} \ N[/tex]
Hence, the electrostatic force between these electrons will be. 2.3×10⁻²⁰ N.
To learn more about Columb's law refer to the link;
brainly.com/question/1616890
#SPJ1
you are designing an airport for small planes. one kind of airplane that might use this airfield must reach a speed before takeoff of at least 27.8m/s and can accelerate at 2.00m/s a)if the runway is 150m long,can this airplane reach the required speed for take off?(in this case v=24.5 m/s) b) if not, what minimum length must the runway have(193m)
(a)The required speed for take off will be 24.49 m/sec.
(b)The minimum length must the runway have 193 m.
What is speed?Speed is defined as the rate of change of the distance or the height attained. it is a time-based quantity. it is denoted by u for the initial speed while v for the final speed. its SI unit is m/sec.
(a)The required speed for take off will be 24.49 m/sec.
From the Newtons third equation of motion;
[tex]\rm v^2 = u^2+2as \\\\ v=0+2 \times 2 \times 150 \\\\ v=\sqrt{600}\\\\ v=24.49 \ m/sec[/tex]
Hence, the required speed for take off will be 24.49 m/sec.
(b)The minimum length must the runway have 193 m.
From the Newtons third equation of motion;
[tex]\rm v^2 = u^2+2as \\\\ (27.78)^2 = 0+2\times 2 s \\\\\ s=192.93 \ m[/tex]
Hence, the minimum length must the runway have 193 m.
To learn more about the speed, refer to the link;
https://brainly.com/question/7359669
#SPJ1
The atomic number of an element whose atoms have 12 protons and 10 neutrons is
Air masses that form over continents in source regions that are cold are called__________.
Group of answer choices:
continental tropical (cT)
maritime tropical (mT)
maritime polar (mP)
continental polar (cP)
Answer:
Continental polar.
Explanation:
it should be a continental polar air mass because, it is cold.
An electromagnetic am-band radio wave could have a wavelength of.
An electromagnetic AM-band radio wave could have a wavelength of 186.6 meters.
Wavelength is the distance between two consecutive points on a wave that are in phase, meaning they are at the same position in their respective cycles. It is usually denoted by the Greek letter lambda (λ) and is measured in units of length, such as meters, centimeters, or nanometers.
The relationship between wavelength, frequency, and speed of a wave is given by the formula:
wavelength = speed / frequency
where "speed" refers to the speed of the wave through a medium, and "frequency" refers to the number of cycles per second.
The AM radio band frequency ranges from 535 kHz to 1605 kHz. To find the wavelength of the AM radio wave, we can use the formula:
wavelength = speed of light / frequency
where the speed of light is approximately 299,792,458 meters per second.
Let's take the highest frequency in the AM radio band, which is 1605 kHz. We need to convert this frequency to Hertz (Hz) by multiplying it by 1000 since kHz is 10^3 times larger than Hz.
1605 kHz = 1605 x 1000 Hz = 1,605,000 Hz
Now, we can calculate the wavelength of the AM radio wave using the formula:
wavelength = 299,792,458 / 1,605,000
wavelength ≈ 186.6 meters
Therefore, an electromagnetic AM-band radio wave could have a wavelength of approximately 186.6 meters.
To learn more about Frequency click:
brainly.com/question/1292129
#SPJ1
Can someone please answer this, ill give you brainliest Would be very appreciated.
Answer: A Because that is local I mean it is confined to a city at least i think so
Answer:
Option 3
Explanation:
All of the mentioned options are mitigation solutions. But, the question has clearly asked for local solutions, which means it has the possibility or feasibility to take place in every neighborhood no matter where you are.
The option which correctly gives this is :
An individual elects to walk or bike to work dailyUltraviolet light is visible to bumblebees but not humans. if the wavelength of *
uv light is 100nm, what is the frequency of the light?
The frequency of the ultraviolet light given that its wavelength is 100 nm is 3×10¹⁵ Hz
Data obtained from the question Wavelength (λ) = 100 nm = 100×10¯⁹ mVelocity of light (v) = 3×10⁸ m/sFrequency (f) =? How to determine the frequency of the lightThe frequency of the light can obtain as illustrated below:
v = λf
3×10⁸ = 100×10¯⁹ × f
Divide both side by 100×10¯⁹
f = 3×10⁸ / 100×10¯⁹
f = 3×10¹⁵ Hz
Learn more about wave:
https://brainly.com/question/14630790
#SPJ4
a 60-w light bulb radiates electromagnetic waves uniformly in all directions. at a distance of 1.0 m from the bulb, the light intensity is i0, the average energy density of the waves is u0, and the rms electric and magnetic field values are e0 and b0, respectively.
Answer:
Explanation:
1. If we increase the distance to twice it's original value, the light intensity is reduced by one-fourth, the light intensity would be:
I0/4
2. rms magnetic field is inversely proportional to distance, so the new rms magnetic field would be:
B0/2
3. average energy density is inversely proportional to the square of the distance, so the new average energy density is:
E0/4
Which of the following is correct for speed?
A vector
Depends on Distance
Unit is a meter/second (m/s)
A vector
Depends on Displacement
Unit is a meter/second (m/s)
A scalar
Depends on Distance
Unit is a meter/second (m/s)
A scalar
A
Depends on Displacement
Unit is a meter/second (m/s)
Answer:
Speed is a "scalar" quantity
(C) is the correct answer
An object could travel at 10 m/s to some point and then return to the origin at 10 m/s for an average speed of 10 m/s, however it's displacement over that time would be zero for a net velocity of zero.
Water can rise from the roots to the tops of trees due to _____.
A. capillary action
B. solubility
C. surface tension
D. homonuclear bonding
E. All of the above
Water can rise from the roots to the tops of trees due to capillary action. The correct option is A.
What is capillary action?It is the phenomenon by which the liquid rises or falls in a very small diameter tube.
In plants. its roots have very thin diameter tubes which are not visible to the eye. But the water reached to the plants through these tube to every single part of the plant i.e. from root to the fruits.
So, water can rise from the roots to the tops of trees due to capillary action.
Thus, the correct option is A.
Learn more about capillary action.
https://brainly.com/question/13228277
#SPJ1
what is an example of digital signals?
Examples of digital signals are Computers, Digital Phones, Digital pens, etc.
What is signal?Signal is defined as an electromagnetic wave that carries information through a medium. In this, the data is converted into electromagnetic signal which may be analog or digital and then sent from sender to receiver.
Signal which are discrete are known as digital signals.
Examples of digital signals are Computers, Digital Phones, Digital pens, etc.
Learn more about signal.
https://brainly.com/question/14699772
#SPJ1
Answer:
Examples of digital signals are Computers, Digital Phones, Digital pens, etc.
A digital signal is a signal that represents data as a sequence of discrete values. A digital signal can only take on one value from a finite set of possible values at a given time. With digital signals, the physical quantity representing the information can be many things: Variable electric current or voltage.
Explain the difference between the direction of force and the plane of application of force. Use a diagram to help you.
The direction of force refers to the path along which the force acts. The plane of application of force, on the other hand, is the surface or area where the force is applied
What is the difference between the direction of force and the plane of application of force?The direction of force refers to the path along which the force acts. It is the straight line in which the force is being applied. For example, if you push a box on the ground, the direction of force is the line of action of the force vector that points in the direction of the push.
The plane of application of force is the surface or area where the force is applied.
Learn more about force:https://brainly.com/question/13191643
#SPJ1
Pulling up on a rope, you lift a 9.27-kg bucket of water from a well with an acceleration of 1.20 m/s2. Part A What is the tension in the rope
which statement best describes the position of the image of an object viewed in a plane mirror?
A). the image is a different distance from the mirror but on the same side of the mirror as the original object
B). the image is the same distance from the mirror and on the same side of the mirror as the original object
C). The image is a different distance from the mirror and on the other side of the mirror as the original object.
D). the image is the same distance from the mirror but on the other side of the mirror as the original object.
The statement D best describes the position of the image of an object viewed in a plane mirror, The image is the same distance from the mirror but on the other side of the mirror as the original object.
What is the image?When light beams from an object reflect off a mirror, they intersect with the picture of that thing, called an image. Real and virtual images are the two sorts of images.
The following parameters can be used to describe an image:
1. It is possible for an image to be real or virtual.
2. Left-right reversal is possible or not.
3. The image can be inverted or upright.
4. The image can be enlarged, shrunk, or made the same size as the object.
Plane mirrors provide virtual images that are upright, inverted left-right, the same distance from the mirror as the item, and the same size as the thing.
As a result, the best description of image production by a plane mirror is “a virtual picture is produced behind the mirror.”
The statement D best describes the position of the image of an object viewed in a plane mirror, The image is the same distance from the mirror but on the other side of the mirror as the original object.
Hence, option D is correct.
To learn more about the image, refer to the link;
https://brainly.com/question/25029470
#SPJ1
Which nucleus completes the following equation?
212 86 Rn-> 4 2 He+?
Answer:
A
Explanation:
208+4=212
84+2=86
The correct answer is A
The tape timer used in this experiment marks the paper tape with dots at fixed time intervals. How does it do that?.
The ticker tape is pulled through the timer once it's powered, which creates a dot along the length of this paper tape at fixed time intervals.
What is a ticker timer?A ticker timer can be defined as a scientific apparatus that is designed and developed to measure time in seconds. Thus, a ticker timer can be used to measure short intervals of time by making dots on a paper tape at regular (fixed) intervals.
By design, a ticker timer comprises a magnet, carbon paper disk and a ticker tape which is pulled through the timer once it's powered, so as to create a dot along the length of this paper tape at fixed time intervals.
Read more on ticker timer here: https://brainly.com/question/4583195
#SPJ1
Complete the paragraph to describe the characteristics of the Sun and Rigel, a blue-white supergiant.
Rigel and the Sun have similar characteristics, but they also differ in some ways. Rigel and the Sun are spheres of gas that use nuclear fusion to produce energy. Rigel is
the Sun. Rigel has
the Sun. Rigel has a surface temperature of about
.
The Rigel is more warmer and brighter as compared to the sun due to its high temperature.
Describe the characteristics of the Sun and Rigel?The Rigel is more warmer and brighter as compared to the sun due to its high temperature and its brightness is about 47,000 times more than that of the Sun. Because of its high temperature, the Rigel is white as compared to the sun.
So we can conclude that the Rigel is more warmer and brighter as compared to the sun due to its high temperature.
Learn more about sun here: https://brainly.com/question/15837114
#SPJ1
50 POINTS! I PROMISE BRAINLIEST IF PLEASEEE I NEED HELP!
An object weighing 6 kg moving at a speed of 12 m / s was stopped by a force of 18 newton. At what time does the subject accelerate?
Answer:
F ΔT = Δ(M V)
Change in momentum is equal to applied force* time
Δ(M V) = 6 kg * 12 m / s = 72 kg-m / s
ΔT = 72 kg-m/s / 18 kg-m/s^2 = 6 s after 6 sec it will tend to rebound
Which field of science gives us the idea that spacetime is not just a flat grid but is
itself a physical entity that can be bent and molded?
A: General Relativity
B: Time dilation
C: quantum mechanics
D: gravitational physics
The field of science that gives us the idea that spacetime is not just a flat grid but is itself a physical entity that can be bent and molded is known as quantum mechanics. Thus, the correct option for this question is C.
What is Quantum mechanics?Quantum mechanics may be defined as a fundamental theory in physics that significantly provides a detailed description of the physical properties of nature at the scale of atoms and subatomic particles. It is basically the branch of physics that deals with the behavior of matter and light on a subatomic and atomic level.
Time dilation in the theory of special relativity is the “slowing down” of a clock as determined by an observer who is in relative motion with respect to that clock.
General relativity is the theory of gravity. The basic idea is that instead of being an invisible force that attracts objects to one another, gravity is a curving or warping of space. The more massive an object, the more it warps the space around it.
Therefore, quantum mechanics is the field of science that gives us the idea that spacetime is not just a flat grid but is itself a physical entity that can be bent and molded. Thus, the correct option for this question is C.
To learn more about Quantum mechanics, refer to the link:
https://brainly.com/question/26095165
#SPJ2
QUESTION 1
1.1 Define the term acceleration in words
Answer:
To be better at something
Explanation:
I have Accelerated at cooking
Answer:
Acceleration means to speed up
Explanation:
What is a hydrometer?
Answer:
an instrument for measuring the density of liquids.
Explanation:
The human pupil, when maximally dilated, has a diameter of roughly 10 mm. How much more light does the primary mirror of the Magellan telescope (measuring 6 m in diameter) collect compared to the human eye
The amount of light collected by Magellan telescope with respect to human eyes is 1.13 x 10⁶ times that of human pupil.
Amount of light collect by human pupilThe amount of light that will pass through the given area of human pupil when maximally dilated is calculated as follows;
A = πd²/4
A = π(0.01)²/4
A = 2.5 x 10⁻⁵π m²
Amount of light collect by Magellan telescopeA = πd²/4
A = π(6)²/4
A = 9π m²
with respect to human eyes = ( 9π m²)/(2.5 x 10⁻⁵π m²)
= 1.13 x 10⁶ x human pupil
Thus, the amount of light collected by Magellan telescope with respect to human eyes is 1.13 x 10⁶ times that of human pupil.
Learn more about human pupil here: https://brainly.in/question/239561
#SPJ1
Most asteroids orbit the Sun between:
A.
Mercury and Venus.
B.
Mars and Jupiter.
C.
Neptune and Pluto.
D.
Saturn and Uranus.
Answer:
mars and jupiterrr
Explanation:
ty for all ur help love u
if you do 40 j of work in 4s, how much power did you generate?
Explanation:
GIVEN :
Work done(W) = 40 J
Time(t) = 4 s
Power (P) = ?
We know that:
W = P×t
Therefore,
P= W/t
=40/4
= 10 W
Hope it helps
What is the acceleration of a 25 kg box that has 50 N of force applied to the right?
1. 2m/s/s
2. 10m/s/s
3. 1,250m/s/s
Answer:
1. 2 m/s/s
Explanation:
Formula
Force = Mass x Acceleration
50 N = 25 kg x (a)a = 50/25a = 2 m/s/swhat is the difference between reflection and refraction? What changes and what does not change.
Answer:
Reflection involves a change in direction of waves when they bounce off a barrier. Refraction of waves involves a change in the direction of waves as they pass from one medium to another.
Explanation:
Can someone please answer this, ill give you brainliest Would be very appreciated.
A decrease in the ice caps causes a(n) (options decrease, increase) in the absorption of sunlight. This causes the global temperature to (options rise, fall) causing more ice caps to melt. As more ice caps melt, the temperature (options rises, falls). This is an example of a (options negative, positive) feedback loop.
Answer:
See below ~
Explanation:
A decrease in the ice caps causes a(n) increase in the absorption of sunlight. This cause the global temperature to rise causing more ice caps to melt. As more ice caps melt, the temperature rises. This is an example of a negative feedback loop.
A decrease in the ice caps causes a(n) increase in the absorption of sunlight. This causes the global temperature to rise causing more ice caps to melt. As more ice caps melt, the temperature rises. This is an example of a negative feedback loop.
The options are followed by
IncreaseRiserisesnegativehow to convert 54km.h to m.s
Answer:
15m/s[tex] \: [/tex]
Explanation:
Before converting , Let's recall this :
1 km = 1000 metres1 hour = 3600 seconds[tex] \: [/tex]
Now, Let's Convert it :
[tex] \\ \longrightarrow \qquad \sf \: 54km / hr \\ [/tex]
[tex]\\ \longrightarrow \qquad \sf \: \frac{54 \times 1km}{1hr} \\ [/tex]
[tex]\\ \longrightarrow \qquad \sf \: \frac{54 \times 1000m}{3600s} \\ [/tex]
[tex]\\ \longrightarrow \qquad \sf \: \frac{54000 m}{3600s} \\ [/tex]
[tex]\\ \longrightarrow \qquad \sf \: \frac{540\cancel{0 }\cancel{0} m}{36 \cancel{0 }\cancel{0}s} \\ [/tex]
[tex]\\ \longrightarrow \qquad \sf \: \frac{540 m}{36s} \\ [/tex]
[tex] \\ \longrightarrow \qquad \frak{\pmb{ 15m /s}} \\ [/tex]
What might you look for as evidence that fusion occurs inside a star?
Answer: neutrinos
Explanation:
Choose the force diagram (freebody diagram) that best represents the forces acting on the object.
The effects of air resistance are negligible. (5 points)
A plate that is at rest on the kitchen table:
Answer:
Diagram B because a plate resting on a table has gravity acting on it and normal/air resistance force working against the gravity with the same amount of force. Forces that are balanced don't move.
Explanation:
I hope this helps
Diagram B represents the forces acting on the plate that is at rest on the kitchen table.
What is normal force?Every day, we experience the normal force.
In this instance, when we lay a plate on a kitchen table, the normal response force prevents the plate from going through the table, even if gravity is pulling the plate downward. That implies that there is a force acting to push it upward. The word "normal force" refers to the force. Normal in this context refers to being perpendicular to the ground.
Hence, in diagram B, downwards arrow represents gravitational force acting on the plate for its weight and upwards arrow represents normal force acting on the plate by the table.
Learn more about normal force here:
https://brainly.com/question/18799790
#SPJ2
