The power in an electrical current is given by the equation

Answer:

speed of the friend that is 8m from the center:

0.8π m/s

the distance she will travel in one rotation is:

10

Her speed compared to you is faster because, she is farther away from the axis compared to you.

Explanation:

for the speed, it says the farther you are from the axis the greater your speed is, and for the person who was 4m from the axis of rotation their speed was 0.4 because they are closer to the axis so therefore their speed is slower. so for the friend that is 8m from the axis of rotation its most likely their speed would be 0.8 m/s.

in one revolution you travel 8m your original distance from the axis was 4m so, 8-4 = 4, which means one revolution is plus 4 to your original distance. since the question is asking for rotation and not revolution you can do 4 ÷ 2 which is 2, so for rotation you need to add 2 to your original distance, so 8 + 2 = 10

The magnitude of emf induced in the single coil of wire rotated in the uniform magnetic field is 0.171 V.

The emf induced in the loop is determined by applying Faraday's law of electromagnetic induction.

emf = N(dФ/dt)

where;

Ф = BA

where;

emf = NBA/t

A = πr²

A = π x (0.13)²

A = 0.053 m²

emf = NBA/t

emf = (1 x 3.746 x 0.053)/(1.16)

emf = 0.171 V

Thus, the magnitude of emf induced in the single coil of wire is 0.171 V.

Learn more about induced emf here: https://brainly.com/question/13744192

Answer:

The answer is in the picture above.

Answer:

Energy = mcΔt

where m the mass ,  c specific heat capacity

Δt is the change in temperature

1200x10^3=75x4184xΔt

Δt=3.82°

Explanation:

Answer:

Explanation:

The point P is influenced by two electric fields, that are from Q1 and Q2. Because Q1 is a positive point charge, the E-fields is going to the right and the E-fields from Q2 is going to the left because of negative point charge. So:

[tex]E_{1}=\frac{kQ_{1}}{R_{1}^{2}}[/tex]

[tex]E_{2}=\frac{kQ_{2}}{R_{2}^{2}}[/tex]

Where R1 = 2 + 3 = 5 m, and R2 = 3 m. With k = [tex]k=9\times 10^{9}[/tex] in [tex]Nm^{2}/C^{2}[/tex], we can obtain:

[tex]E_{1}=(9\times 10^{9})\frac{500\times10^{-6}}{25}=180\times 10^{3}[/tex] N/C (+)

[tex]E_{2}=(9\times 10^{9})\frac{100\times 10^{-6}}{9}=100\times 10^{3}[/tex] N/C (-)

So: the Electric Field at P : [tex]E_{P}=E_{1}-E_{2}=(180-100)\times 10^{3}=8\times 10^{4}[/tex] N/C in magnitude

Hi there!

We can use Ampère's Law:

[tex]\oint B \cdot dl = \mu_0 i_{encl}[/tex]

B = Magnetic field strength (B)
dl = differential length element (m)
μ₀ = Permeability of free space (T/Am)

Since this is a closed-loop integral, we must integrate over a closed loop. We can integrate over a rectangular-enclosed area of the rim of the solenoid - ABCD - where AD and BC are perpendicular to the solenoid.

Thus, the magnetic field is equivalent to:
[tex]\oint B \cdot dl = \int\limits^A_B {B} \, dl + \int\limits^B_C {B} \, dl + \int\limits^C_D {B} \, dl + \int\limits^D_A {B} \, dl[/tex]

Since AD and BC are perpendicular, and since:
[tex]\oint B \cdot dl = B \cdot L = BLcos\phi[/tex]

[tex]BLcos(90) = 0[/tex]

If perpendicular to the field, the equation equals 0.

Additionally, since AB is outside of the solenoid, there is no magnetic field present, so B = 0. The only integral we integrate now is:
[tex]\oint B \cdot dl = \int\limits^C_D {B} \, dl[/tex]

Which is horizontal and inside the solenoid. Let the distance between C and D be 'L', and the enclosed current is equivalent to the number of loops multiplied by the current:

[tex]B L = \mu_0 Ni[/tex]

N = # of loops per length multiplied by the length, so:
[tex]BL = \mu_0 nL i \\\\B = \mu_0ni[/tex]

Plug in the given values and solve. Remember to convert # of loops to # of loops per unit length.

[tex]B = \mu_0 (100/0.1)(2) = (4\pi *10^{-7})(1000)(2) = \boxed{0.00251 T}[/tex]

Answer:

After 1 decay it has .9375 of its value left  

.9375^n = 1/2

What is the value of n (number of decays)

n log .9375 = -.693

n =.693 / .0645 = 10.7

After 10.7 periods of 50 sec it will have 1/2 of its original nuclei left

1/2 life = 10.7 * 50 sec = 537 sec = 8.95 min

Explanation:

no. of seconds in a year = 60 × 60 × 24 × 365

= 31,536,000 seconds

so 2.05 × 10⁵ into years = 0.0065 years (approximately)

Answer:

the answer to this question is option c

there process which eventually takes place is called refraction

Explanation:

please do consider as brainlest if useful

Answer:

False

Explanation:

A land breeze is when air flows from land to water. The question above is describing a sea breeze, which is when cool ocean air blows toward land.

nothing

Explanation:

we can say that it was certainly bad for the shopkeeper obviously and we should not be making questions about the physics behind that accident and should call the cops or 911

Answer:

3 pi R / s     or   9.42 R/s    or  540 degrees/sec

Explanation:

Ball covers 2 pi radians each rotation

2 pi * 3 R / 2  s =   3 pi R / s

the angular speed of the ball is 3 pi R / s     or   9.42 R/s    or  540 degrees/sec

Angular speed can be defined as the measures of speed of how fast the central angle of a rotating body changes with respect to time

Angular speed mainly implies how quickly the rotation of an object occur means it is described as the change in the angle of the object per unit of time.

To calculate the speed of a rotational motion the angular speed value need to be known, hence  The angular speeds formula is used to calculate the distance traveled by an object in terms of rotation and revolutions per unit of time.

The unit of angular speed of an object is radian per second and Both angular speed, angular velocity are determined by using the same formula, angular velocity is  vector quantity which describes both magnitude and direction.

For more details  angular speed,  visit

https://brainly.com/question/28439806

#SPJ2

During the phase change in which heat is being added but the temperature remains constant, the heat energy is used to break the bonds in the molecules.

A phase change is the conversion of one state of matter to another. e.g. solid to liquid or liquid to gas.

Substances can exists in three states namely;

In a change of phase, heat energy is needed to break the existing bonds between the molecules of the initial state. For example, heat energy is needed to break the bonds of ice to form water.

However, during this phase change, the temperature remains constant.

Therefore, during the phase change in which heat is being added but the temperature remains constant, the heat energy is used to break the bonds in the molecules.

Learn more about phase change at: https://brainly.com/question/1429452

Hi there!

A)

At this point, the pilot is experiencing a DOWNWARD NET centripetal force (ALWAYS points towards the center of the circle) as well as a downward force due to gravity. Additionally, we can say that the normal force exerted by the seat on the pilot is its apparent weight.

[tex]\Sigma F = F_g + F_N[/tex]

**The net force is the centripetal force.

We can assign both to be positive since they work in the same direction. (Assigning down as positive in THIS situation will make things easier).

We know that:
[tex]F_c = \frac{mv^2}{r}[/tex]

Fc = Centripetal force (N)
m = mass (kg)
v = velocity (m/s)

r = radius (m)

[tex]F_g = mg[/tex]

Fg = Force due to gravity (N)
m = mass (kg)
g = acceleration due to gravity (9.81 m/s²)

Solve for mass. (Given weight)

[tex]m = \frac{F_g}{g}\\\\m = \frac{719}{9.8} = 73.367 kg[/tex]
Now, we have everything we need to solve.

[tex]\frac{mv^2}{r} = F_g + F_N \\\\\frac{mv^2}{r} - F_g = F_N\\\\F_N = \frac{(73.367)(225^2)}{3110} - 719 = \boxed{475.278 N}[/tex]

B)
Weightlessness is achieved when the pilot is in free fall. In this instance, FN (Normal force by the seat) = 0 N.

We can use the same setup as above.

[tex]\frac{mv^2}{r} = F_g + 0 (F_N)[/tex]

[tex]\frac{mv^2}{r} = mg[/tex]

Solve for 'v'.

[tex]\frac{v^2}{r} = g\\\\v = \sqrt{gr} = \sqrt{(9.81)(3110)} = \boxed{174.669 \frac{m}{s}}[/tex]

C)
At the BOTTOM, we have the force of gravity working DOWNWARD (Negative in this instance), while the centripetal force (NET FORCE) and normal force are upward (Positive). Do another summation of forces:
[tex]\Sigma F = F_N - F_g\\\\\\frac{mv^2}{r} + F_g = F_N \\\\F_N = \frac{(73.367)(225^2)}{3110} + 719 = \boxed{1913.278 N}[/tex]

We can confirm that the clothes are sticking together due to static forces created by the heat and friction of the dryer.

The clothes are stuck together due to static forces that arise when these materials are heated and the friction from the dryer cycle. Adding a light spray of water can help with this situation given that water is a strong conductor of electricity, which will help to dispel the charges that hold the clothes together.

Therefore, we can confirm that clothes are sticking together due to static forces created by the heat and friction of the dryer, which a light spray of water can help to dispel and separate the clothes.

To learn more about static forces visit:

https://brainly.com/question/14292758?referrer=searchResults

According to a periodic table, Krypton was created during the fission of Uranium.

Atomic number is a characteristic associated with an element and indicates its number of protons, when a fision occurs, the total number protons is conserved.

Thus, the fission of uranium is led by two elements with atomic numbers 56 and 36. According to a periodic table, those atomic numbers are associated to elements Barium (Ba) and Krypton (Kr), respectively.

According to a periodic table, Krypton was created during the fission of Uranium. [tex]\blacksquare[/tex]

To learn more on fission, we kindly invite to check this verified question:  https://brainly.com/question/6572079

Explanation:

Curd is made from milk . ( True )

Curd is made by bacterial fermentation of milk.

Answer:

very true

curd is made from warm milk and a bacterial youghurt starter and it aslo has been used for many years

pleaseee pretty please put me as brainliest

Answer:

0.73kg

Explanation:

Potential gravitational energy is equal to [tex]Pe=mgh[/tex], where Pe is potential gravitational energy, m is mass in kilograms, g is gravity in m/s^2 and h is height in meters.

Substitute:

[tex]Pe=mgh\\23=m*9.8*3.2\\23=31.36m\\0.73=m[/tex]

Answer:

Explanation:

The velocity of sound from the plucked string in the tennis racquet is:

[tex]v=\sqrt{\frac{FL}{m}}=\sqrt{\frac{274(0.74)}{28}}\approx 2.69 ms^{-1}[/tex]

Then the frequency will be:

[tex]f=\frac{v}{2L}=\frac{2.69}{2(0.74)}\approx 1.81 Hz[/tex]

average velocity= tot displacement/total time

avg v = 20/(20+60+5+10+5)=20/100=0.2 m/s

Answer:

First the charge is given 7.50×10^-6

Explanation:

so that we have

[tex]90 [/tex]

then the direction is one is left and other one is right so thats my hint

Answer:

m(P4) =  46.175 (grams)

m (KClO3) = 149 (grams)

Explanation:

1) n(P4) = n(P4O10);

m(P4)/M(P4) = m(P4O10)/M(P4O10);

m(P4) = M(P4)*m(P4O10)/M(P4O10)
          = 123.90*105.8/283.89
          = 46.175 (grams)

2) Analogously, 10n(P4O10) = 3n(KClO3)

m (KClO3) = 10M(KClO3)*m(P4O10)/3M(P4O10)
                = 10*122.55*105.8/283.89/3
                = 149 (grams).

149 gm of each reactant is needed to produce 105.8 gm of tetra phosphorous decaoxide .

In a chemical equation, the substance or substances to the left of the arrow are referred to as reactants. A substance that is present when a chemical reaction first begins is known as a reactant.

Products refer to the material or substances to the right of the arrow. A substance that is present after a chemical reaction is complete is called a product.

Given Data:

m(P4) =  46.175 (grams)

m (KClO3) = 149 (grams)

Then it is given by:

1) n(P4) = n(P4O10);

m(P4)/M(P4) = m(P4O10)/M(P4O10);

The equation becomes :

m(P4) = M(P4)*m(P4O10)/M(P4O10)

         = 123.90*105.8/283.89

         = 46.175 (grams)

2) Analogously, 10n(P4O10) = 3n(KClO3)

m (KClO3) = 10M(KClO3)*m(P4O10)/3M(P4O10)

               = 10*122.55*105.8/283.89/3

               = 149 (grams).

Thus, 149 gm of each reactant is needed to produce 105.8 gm of tetra phosphorous decaoxide .

To learn more about reactant, refer to the below link:

https://brainly.com/question/15957355

# SPJ2

Answer:

See below

Explanation:

Assuming starting from zero velocity

vfinal = at

24   = a (5.5)

a = 4.36  m/s^2        I think part of your question is missing....what was the initial velocity?

Answer:

Mass

Explanation:

In the core of the red giant, helium fuses into carbon. All stars evolve the same way up to the red giant phase. The amount of mass a star has determines which of the following life cycle paths it will take from there. The life cycle of a low mass star (left oval) and a high mass star (right oval).May 7, 2015

Answer:

when it has a fewer amount of electrons than protons

Answer:

the answer is B I hope it helps out

For two horses pull horizontally on ropes attached to a stump, the magnitude of F and its direction is mathematically given as

F=1711 N

dF= 135 degrees

Generally, the equation for the components of F1   is mathematically given as

For The x axis

1210 - F2x = 0

F2x = 1210

For the y axis

F2y = R

F2y = 1210

In conclusion

F = sqrt(2)*1210

F=1711 N

Fopt the direction of F2

dF= 90 + 45

dF= 135 degrees

Read more about Force

https://brainly.com/question/13370981