The photo shows a seismograph. It is a machine that detects earthquakes
and makes graphs of the waves made by them.
What is the medium of the wave being detected by this seismograph?
A. Paper
B. Ink
C. Air
D. Rock

The cations and anions can be identified using cataloged reactions schemes. For instance, the copper II ion can be identified by reaction with sodium hydroxide.

The sodium cation is easily identified by flame test. sodium imparts a yellow color to a flame. The chloride ion is identified by the use of a mixture of HNO3/AgNO3 solution. The color of the precipitate shows which halide ion is present. A white precipitate indicates the presence of the chloride ion.

The potassium cation is also identified by flame test. The ion imparts a lilac color to flame. Addition of acidified FeSO4 solution is used to confirm the presence of the nitrate ion. Formation of a brown ring is a positive test for the nitrate ion.

For CuSO4, the presence of copper II ion can be confirmed using dilute NaOH. If a light blue precipitate is formed which dissolves in excess NaOH then the copper II ion is confirmed. The presence of the sulfate ion is confirmed using a solution of barium nitrate and dilute nitric acid. Formation of a white precipitate is a positive test for the sulfate ion.

Learn more: https://brainly.com/question/5624100

Answer:

A

Explanation:

Because it is the greatest

Answer:

The major difference between atomic number and mass number is that the atomic number states the number of protons present in an atom whereas, the mass number indicates the total of the number of protons and the number neutrons present in an atom.

Explanation:

Answer:

c

Explanation:

Answer:

Temperature and Pressure

Explanation:

Temperature and pressure cause change in volume.

So any change in volume will alter the ratio of density as given by equation of density.

Density = mass/ volume

Change in volume will alter the ratio.

Kindly mark it branliest if the answer is little bit satisfying.

The two (2) factors which must be held constant for density to be a constant ratio are:

I. The temperature of a sample or physical substance.

II. The pressure around the sample or physical substance.

Density can be defined as mass all over the volume of of a sample or physical substance.

Basically, density is mass per unit volume of of a sample or physical substance.

Mathematically, the density of a of a sample or physical substance is given by the formula;

[tex]Density = \frac{Mass}{Volume}[/tex]

The density of a sample or physical substance is directly proportional to pressure and inversely proportional to temperature.

This ultimately implies that, an increase in pressure with temperature being constant would cause an increase in density and vice-versa.

Conversely, a decrease in temperature with pressure being constant would cause an increase in density and vice-versa.

In conclusion, a change in volume of a substance is caused by both temperature and pressure.

Read more: https://brainly.com/question/18320053

The following reaction gives a product with the molecular formula C₄H₈O₂. The diagram of the structure of the product can be seen in the image attached below.

The reaction between C₂H₂(ONa)₂ and C₂H₄Br results in the formation of the product C₄H₈O₂ and 2NaBr.

This reaction undergoes an SN₂ mechanism since there is no stable carbocation formed. In the reaction -O⁻Na⁺ attacks the ortho position in C₂H₄Br to form C₄H₈O₂.

In  SN₂ mechanism is a nucleophilic substitution reaction where one bond is formed while another one is broken simultaneously.

The mechanism for the reaction can be seen in the image attached below.

Learn more about nucleophilic substitution reaction here:

https://brainly.com/question/4699407?referrer=searchResults

Answer:

The number of protons and electrons are equal.

Explanation:

When an atom has an equal number of electrons and protons, it has an equal number of negative electric charges (the electrons) and positive electric charges (the protons). The total electric charge of the atom is therefore zero and the atom is said to be neutral.

Answer:

tysm

tysm

tysm dear

Answer:

Thermal Energy

Explanation:

Thermal energy is the total internal kinetic energy of an object due to the random motion of its atoms and molecules They consist of the sum of the internal kinetic energy (thermal energy) and the potential energy of an object.

Answer:

B. thermal energy.

Thermal energy or heat is due to the movement or vibrations of tiny particles such as atoms and molecules.

Explination:

Einstein proved the existense of atoms through his observation of Brownian Motion (the random movement of a dust particle, caused by it bumping into atoms).

Answer:

Your answer is D.

Explanation:

Answer:

I would answer D

Explanation:

I might be wrong though

Answer:

nnnnnnnnnnnnnnnnnnnnnn

Explanation:

jhhhhhhhhhhhhhhhhbhhhh

Answer:

That would be ATP, hope this helps! :)

Given what we know, we can confirm that a compound will be a binary compound if it contains both a metal and a non-metal element.

Therefore we can confirm that since a metal will donate its electron to a non-metal element to form covalent bonds, we will know if the compound is binary or not based on the presence of a metal and a non-metal.

To learn more about metals visit:

https://brainly.com/question/948126?referrer=searchResults

Answer:

1.Velocity and pitch

2.The unit of vibration is hertz. The number of oscillations of an oscillating body per second is known as frequency. Complete step by step answer: The time taken by a vibrating body to complete one vibration is time period.

3.Frequencies above 20,000 Hz are known as ultrasound.

answer:

the reason is to ensure more solute is dissolving as it cools down. it is important to do it slowly because water will be sucked into buchner flask by a partial vaccum through the rubber tubing and be able to arrange molecules.

SN2 reaction proceeds with inversion of configuration at the reacting carbon atom. The product has a different configuration at this carbon atom from the product.

SN2 reaction is a short form for substitution nucleophilic bimolecular reaction. It is a synchronous reaction in which the leaving group departs at the same time as the nucleophile attacks in a single transition state.

Recall that SN2 reaction proceeds with inversion of configuration hence the product has a different configuration at the reacting carbon atom from the product. The inorganic product in this reaction is HI. The organic product is shown in the image attached to this answer.

Learn more: https://brainly.com/question/10079361

Answer:

The required mass to prepare 2.5 L of 1.0 M NaOH solution is 100 g

Explanation:

We do this by preparing the equation:

Mass = concentration (mol/L) x volume (L) x Molar mass

Mass = 1.0 M x 2.5 L x 40 g/mol

Mass = 100 g

Answer:

[tex]100\; \rm g[/tex] of [tex]{\rm NaOH}\; (s)[/tex] would be required.

Explanation:

The quantity of solute in a solution of concentration [tex]c[/tex] and volume [tex]V[/tex] would be [tex]n = c \cdot V[/tex].

It is given that volume [tex]V = 2.5\; \rm L[/tex] for the solution in this question. It is also given that the concentration of the [tex]\rm NaOH[/tex] solute in this solution is [tex]c = 1.0\; \rm M[/tex], which is the equivalent to [tex]c = 1.0\; \rm mol \cdot L^{-1}[/tex].  

Apply the equation [tex]n = c \cdot V[/tex] to find the quantity of [tex]\rm NaOH[/tex] in this solution:

[tex]\begin{aligned}n &= c \cdot V \\ &= 1.0\; \rm mol \cdot L^{-1} \times 2.5\; \rm L \\ &= 2.5\; \rm mol\end{aligned}[/tex].

Multiply the quantity [tex]n[/tex] of [tex]\rm NaOH[/tex] in this solution with the formula mass [tex]M[/tex] of [tex]{\rm NaOH}\![/tex] to find the corresponding mass:

[tex]\begin{aligned}m &= n \cdot M \\ &= 2.5\; \rm mol \times 40\; \rm g \cdot mol^{-1} \\ &= 100\; \rm g\end{aligned}[/tex].

Thus, this solution would contain [tex]100\; \rm g[/tex] of [tex]{\rm NaOH}[/tex].

It would thus take [tex]100\; \rm g[/tex] of [tex]{\rm NaOH}[/tex] to prepare this solution.

The average atomic mass of element X that has two isotopes (one of 45.0 amu mass and 45% abundance and the other of 47.0 amu mass and 55.0% abundance) is 46.1 amu (option 1).  

The average atomic mass (A) of element X can be calculated as follows:

[tex] A = m_{1}\%_{1} + m_{1}\%_{1} [/tex]    (1)

Where:

m₁: is the mass of isotope 1 = 45.0 amu

m₂: is the mass of isotope 2 = 47.0 amu

%₁: is the abundance percent of isotope 1 = 45.0 %

%₂: is the abundance percent of isotope 1 = 55.0 %

Hence, the average atomic mass is (eq 1):

[tex] A = m_{1}\%_{1} + m_{1}\%_{1} = 45.0 amu*45.0\% + 47.0 amu*55.0\% = 45.0 amu*0.45 + 47.0 amu*0.55 = 46.1 amu [/tex]  

Therefore, the average atomic mass of element X is 46.1 amu (option 1).

Find more about atomic mass here:

I hope it helps you!

The scientific principle was surmised by Werner Heisenberg and it is called Heisenberg's uncertainty principle.

In 1927 German scientist Werner Heisenberg propounded the uncertainty principle which states that both the position and momentum of a particle cannot be measured simultaneously with certainty.

That is, the more accurate we measure the position of the particle, the less accurate we would measure its momentum.

Heisenberg's uncertainty principle is stated mathematically as ΔpΔx ≥ h/4π where p is the momentum, x is the position and h is Planck's constant.

So, the scientific principle was surmised by Werner Heisenberg and it is called Heisenberg's uncertainty principle.

Learn more about Heisenberg's uncertainty principle here:

https://brainly.com/question/14889796

Answer:

50,000,000 Hz

Explanation:

Rearrange the formula:

wave speed = frequency × wavelength → frequency = wave speed ÷ wavelength

wave speed = 300,000,000m/s

wavelength = 6m

Substitute in the values:

frequency = 300,000,000 ÷ 6

frequency = 50,000,000 Hz

Hope this helps!

Exponential growth can lead to decreasing the population size, which represents an example of a NEGATIVE feedback loop. This control mechanism (negative feedback) is common in nature.

Negative feedback is a homeostatic self-regulatory process by which the output of a given system is fed back in order to reduce its internal fluctuations.

In a negative feedback, an amplified output from the system (e.g., in this case, a sudden increased population size) leads to its self-inhibition.

This control mechanism (negative feedback loop) helps to maintain the homeostatic balance of the entire system in order to reach a set point.

Learn more in:

https://brainly.com/question/11312580

Answer:

Answer:

Translated < what is the maximum number of electrons in the sublevel 4s?

answer 32 electrons

Answer:

the anion of a salt is able to react with a H+ ion to form a weak acid, it can be removed from the solution by adding an acid. For CuBr adding H+ forms HBr and that is a weak acid; therefore, CuBr is more soluble in acid than in water:

Answer:

I would assume its the last one "The grass in the prairie provides oxygen, while animals give off carbon dioxide gas."

Explanation:

The question asks how the animals and plants rely on each other

The plants provide oxygen and food for the animals, and the animals provide carbon dioxide to them.

Hope this helps :D

Because only certain size electron orbits are allowable, the frequency and energy of the electron is quantized

According to the Bohr model of the atom, an electron moves from a lower to a higher energy level when it absorbs energy. This energy is released when the electron returns to ground state.

According to the Bohr model, only certain size electron orbits are allowable hence the frequency and energy of the electron is quantized.

Learn more: https://brainly.com/question/25150590

Answer:

I believe your answer is B.) I hope this helps.

Answer: The bubbles produced are most likely due to oxygen.

Explanation:

Photosynthesis is a phenomenon in which green plants containing chlorophyll use sunlight as a source of energy to convert carbon dioxide and water to form glucose and oxygen.

The balanced chemical reaction for photosynthesis is:

Answer:40=6*6(6+5)8x42

Explanation: so yea