Answer:
i = 0.483 A
Explanation:
B = [tex]\frac{U.i}{2pi*r}[/tex]
So, here the r is 0.225 m
The Magnetic field is 4.29 x [tex]10^{-7}[/tex] t
U. = 4π x [tex]10^{-7}[/tex] x i
4.29 x [tex]10^{-7}[/tex] = (4π x [tex]10^{-7}[/tex] x i) / (2π * 0.225)
Cutting [tex]10^{-7}[/tex]
4.29 = [tex]\frac{4π * i}{2π * 0.225}[/tex]
4π and 2π canceled, left with 2
4.29 = [tex]\frac{2i}{0.225}[/tex]
4.29*0.225 = 2i
0.96525 = 2i
i = [tex]\frac{0.96525}{2}[/tex]
i = 0.482625 A
Rounding to 3 digits after decimal, we get
∴ i = 0.483 A
i. Calculate the average velocity of a motor cycle that travels 72km/hr 20 seconds.
The motorcycle's average velocity will be 20 m/sec. The ratio of the overall distance traveled to the total time taken by the body is the average velocity.
What is average velocity?The average velocity is the ratio of the total distance traveled to the total time taken by the body. Its unit is m/sec.
V= 72km/hr =20 m/sec
Total distance travelled by the motorcycle;
D= v ×t
D=(20 m/sec)×20 sec
D=400 m
The average velocity is:
[tex]\rm v_{avg}=\frac{d_{total}}{t_{total}} \\\\ \rm v_{avg}=\frac{400}{20} \\\\ v_{avg}=20 m/sec[/tex]
Hence,the motorcycle’s average velocity will be 20 m/sec.
To learn more about the average velocity, refer to the link;
brainly.com/question/862972
#SPJ1
A boat moves 3.0 km due north and then moves 1.0 km due south. The time for this trip is half an hour. What is the average velocity of the boat
The average velocity of the boat given the data from the question is 6.32 Km/h
What is velocity?Velocity is defined as the rate of change of displacement with time. Mathematically, it is expressed as
Velocity = displacement / time
How to determine the resultant displacementDisplacement 1 (d₁) = 3 KmDisplacement 2 (d₂) = 1 KmResultant displacement (D) =?
D² = d₁² + d₂²
D² = 3² + 1²
D² = 9 + 1
D² = 10
Take the square root of both sides
D = √10
D = 3.16 Km
How to determine the average velocityResultant displacement = 3.16 KmTime = 1/2 hour = 0.5 hourAverage velocity =?
Average velocity = resultant displacement / time
Average velocity = 3.16 / 0.5
Average velocity = 6.32 Km/h
Learn more about velocity:
https://brainly.com/question/3411682
#SPJ1
where are most of the comets in our solar system found?
Answer:
some far beyond the edge of the solar system called the Oort Cloud, and some beyond Neptune in a region called the Kuiper Belt.
Explanation:
Hopefully this helps
When charging a fully depleted battery with a 220/240-volt charging dock, 2023 leaf s can be fully charged in about ________.
When charging a fully depleted battery with a 220/240-volt charging dock, Nissan LEAF can be fully charged in about 7.5h.
What is battery?It converts the electro chemical energy to the electrical energy when connected across the two ends of the conductor.
The Nissan LEAF comprises of a standard 120-V charging cable. In order to charge it fully, we need a 220/240Volts battery. The time take take n to fully charge is 7.5 hours.
Thus, when charging a fully depleted battery with a 220/240-volt charging dock, Nissan LEAF can be fully charged in about 7.5 h.
Learn more about battery.
https://brainly.com/question/21567100
#SPJ1
What does a capacitor do in a circuit?
Throughout this lesson, you learned about the lives and contributions of key scientists in this area of physics. Create a timeline that ties them all together. The timeline does not need to be highly detailed, but it should do the following:
Include at least the four major scientists covered in this unit: Oersted, Ampère, Faraday, and Tesla.
Include key contributions of each scientist and provide a year, if possible, for those contributions.
Note any relationships among these and other scientists, especially if one developed something based on the work of another.
Arrange the scientists chronologically by their first key contribution, not by their birth date.
Oersted -Electromagnetic theory in 1820(July).
Ampere - Static needle -a component of galvanometer in 1820 (September).
Faraday - Electromagnetic induction in 1831.
Tesla - First Alternating current motor and transmission system in 1882.
What is magnetic field?The region of space where a charged object moves in the direction of magnetic force and induces current.
Thus, the scientist are arranged chronologically with their key inventions.
Learn more about magnetic field.
https://brainly.com/question/14848188
#SPJ1
The acceleration due to gravity on earth is 6 times that on the moon. An object weighs 10 kg on Earth. What is the mass on the moon?
Answer:
The object obeys the equation
F = M a on both the earth and the moon (mass does not depend on location)
The problem is a little misleading because if an object has a mass of
10 kg then its weight is 10 kg * 9.8 m/s^2 = 98 Newtons
That means that weight is not expressed in Kg but rather in Newtons
Newton's Law is true on the moon as it is on the earth and F = M a
An object that weighed 10 N on earth would weigh 10 / 6 = 1.67 N on the moon
One must take care in describing a force in units of Newtons not in Kg
I need help with my homework please? I will give a lot of points and a brainlist.
#1
True
All metals attract magnets
#2
Yes true
Away from magnetic field if you place something it won't attract that
#3
False
Its only possible in case of electromagnetic force fields .
#4
False
Electromagnetic force field
#5
True
Wind turbines are becoming an increasingly popular method of generating a community’s electricity. In wind turbines, wind is used to power electric generators. How will an increase in the use of wind turbines affect the availability of wind in the future?
Answer:
It will not. The thing with wind is as long as the earth rotates and creates and uneven heating of the atmosphere, there will be infinite wind.
Explanation:
Why is nuclear energy able to be used for practical purposes? the reactions are controlled to regulate energy output. the reactions are uncontrolled for maximum energy output. all of the products are fed back into the reaction to keep it going. all of the products are immediately removed to inhibit more reactions.
Nuclear energy is is used practically for many energy requirements because the reactions are controlled to regulate energy output
What is nuclear energy?Nuclear energy is the energy reaelesed during nuclear relations.
Nuclear energy is a clean form of energy which is available in enormous amounts.
Nuclear energy is is used practically for many energy requirements because the reactions are controlled to regulate energy output.
Therefore, the control of nuclear reactions make the use if nuclear energy possible.
Learn more about nuclear reactions at: https://brainly.com/question/25387647
#SPJ4
Answer: A or the reactions are controlled to regulate energy output.
Explanation: did it on edge!
Can someone please answer this, ill give you brainliest Would be very appreciated.
Answer:
See below ~
Explanation:
What is happening to each event as the climate changes? Temperatures are increasing, carbon dioxide levels are increasing, the pH of the ocean is decreasing, sea levels are increasing, and the amount of sea ice is decreasing.
Here are orders of answers from start
IncreasingIncreasingDecreasingincreasingdecreasingThe main reason behind these situations is global warming
The emmison of carbon dioxide has increased a lot which is getting harmful day by day
what is the wavelength of a 28Hz periodic wave at 10 meters per second?
AnswerAnswerAnswerAnswerAnswer:0.3571m
Explanation:
Unit Test Review
Active
1
2
3
Which statement best describes heat and thermal energy?
O They are different words for the same thing.
O They represent different concepts.
O Heat is what happens when thermal energy stops moving between substances.
O Thermal energy is what happens when heat moves between substances.
Answer:
option B...
they represent different concept...
i hope this will answer your question
an airplane carrying out a parcel drops releases a parcel while travelling at a steady speed of 90 m/s at an altitude of 200 m. caculate a)the time taken between the parcel leaving the airplane and it striking the ground b)the horizontal distance travelled by the parcel in this time. c)the speed at which the parcel strikes the ground
a)The time taken between the parcel leaving the airplane, and it's striking the ground will be 6.38 second
c)The speed at which the parcel strikes the ground will be 62.64 m/sec.
What is speed?Speed is defined as the rate of change of the distance or the height attained. it is a time-based quantity. it is denoted by U for the initial speed while V for the final speed. its SI unit is m/sec.
The given data in the problem is;
Steady speed (V)= 90 m/s
Altitude (h) = 200 m
Time taken (t)=?
horizontal distance travelled(d)=?
Striking speed(V)=?
The striking speed is;
[tex]\rm V^2=U^2+2gh \\\\ V=\sqrt{2gh} \\\\V=\sqrt{2\times 9.81 \times 200} \\\\ V= \sqrt{3924} \\\\ V=62.64 \ m/sec[/tex]
The time taken is found as;
[tex]\rm H = ut + \frac{1}{2} gt^2 \\\\ 200=0+ \frac{1}{2} \times 9.81 \times t^2 \\\\ t=6.38 \ sec[/tex]
Hence, the time taken between the parcel leaving the airplane, and it's striking the ground will be 6.38 second
To learn more about the sped, refer to the link;
https://brainly.com/question/7359669
#SPJ1
What is the water division of earth
Answers:
Ocean water 1% freshwater frozen as ice 90% and freshwater9%
Ocean water 47% freshwater 50% and freshwater frozen as ice 3%
Ocean water 97.5% Freshwater frozen as ice 1.5% and freshwater 1%
Ocean water 33.33% freshwater frozen as ice 33.33% and Ocean water 33.33%
Answer:
the third option
Explanation:
Answer:
Ocean water 97.5% Freshwater frozen as ice 1.5% and freshwater 1%
Explanation:
The brightness of a star decreases by the square of the distance. This is known as:.
Answer:
inverse-square law.
Explanation:
Since the area increases as the square of the distance, the brightness of the light must decrease as the inverse square of the distance.
hope this helped you!
find the resistance of a multiplier connected with milliammeter of resistance 10 ohms with a deflection of 10 milliamperes and the voltage of the circuit is 15 volts
. A 6 ohm resistor is connected to a 15 volt battery.
a. What is the current in the circuit?
b. How much heat is produced in 10 minutes?
Answer:
2.5A , 22500 JOULE
Explanation:
Resistance (R)= 6 ohm
Voltage (V) = 15 volt
a)
Current (I) = ?
From ohm's law,
V=IR
15 = 6*I
I = 2.5 A
b)
time(t) = 10min = 600 second
heat energy (Q) = ?
from Joule's law of heating,
Q = I²*R*t
Q = 2.5² *6*600
Q = 22500 Joule
hence, heat energy produced is 22500 joule.
What type of monomers make up liquids
Answer:
Carbohydrates - monosaccharides.
Lipids - glycerol and fatty acids.
Nucleic acids - nucleotides.
Proteins - amino acids.
Explanation:
If the half-life of iodine-131 is 8.10 days, how long will it take a 50.00 g sample to decay to 6.25 g?
The time it will take to decay 6.25 grams is 24.4684 days.
What is Half life period?A radioactive substance's half-life is often described as the amount of time it takes for one of its atoms to break apart or transform into another. Ernest Rutherford originally examined the theory in 1907. This is typically represented by the sign Ug or t1/2.
To make the concept clearer, let's use a radioactive element with an hour-long half-life.
Now according to the question the given values are :
T(1/2) for iodine-131 is 5.10 days,
[A]₀ for iodine-131 is 50 grams and,
[A] for iodine-131 is 6.25 grams.
T(1/2)=0.693/k
⇒8.10=0.693/k
⇒k=0.865 [tex]days^{-1}[/tex].
2.303 log [A]₀/[A]= kt
2.303 log(50.00/6.25)= 0.085×t
⇒t=1/0.085×2.303×log8
t=24.4684 days
Hence, the time it will take to decay is 24.4684 days.
To get more information about Half life period :
https://brainly.com/question/9654500
#SPJ2
Can someone please answer this, ill give you brainliest Would be very appreciated.
Answer:
C. Surface tension
What property of water allowed the paperclip to stay on the top of the water?
Solution:Surface Tension
Explanation:The strong surface tension enables the paper clip float on the water, despite its much higher density which is caused by the cohesive forces between liquid molecules.
grrr i don't have much time, help please T^T
will give brainlist and points! I'LL OWE YOU FOREVER
Answer:
2. ( b ) zero
3. ( c ) 10 s
4. Uniform then decreasing
Explanation:
2.
Since the motion is uniform, initial and final velocity will be 0, hence acceleration will be zero.
3.
Initial velocity ( u ) = 5 m/s
Final velocity ( v ) = 35 m/s
Acceleration ( a ) 3 m/s^2
To find : Time ( t )
Formula : -
t = v - u / a
= 35 - 5 / 3
= 30 / 3
t = 10 s
Answer:
See below ~
Explanation:
Q2
The uniform circular motion in the movement of object in a circular path with fixed and perpendicular on the direction of the motion acceleration.
dQ3
Substitute the values in : v = u + at35 = 5 + 3t3t = 30t = 10s (c)Q4
The vertical component for a projectile by acute angle on the horizontal axis changes from decreasing then increasing velocity.
dWhat is the change in the internal energy of a system that does 600 joules of work and absorbs 800 joules of heat?
A. -200 J
B. -1,400 J
C. 1,400 J
D. 200 J
[tex]\huge{\color{red}{\fbox{\textsf{\textbf{Answer}}}}} [/tex]
200J
Explanation:
Change in the internet energy = Heat aborsbed - work done
800 - 600
200 J
Answer:
D. 200J
Explanation:
If you want to minimize the amount of current drawn from the solar panel supply, what resistor value should you use for the line resistor (Rline) from your inventory of resistors and why
To minimize the energy loss due to over heating of the solar panel use resistors in parallel arrangement.
Energy loss in a circuitThe amount of energy dissipated in a circuit is determined using the following formulas;
P = I²Rt
where;
I is the currentR is resistancet is timeThus, to minimize the energy loss due to over heating of the solar panel use resistors in parallel arrangement.
Learn more about resistors here: https://brainly.com/question/24858512
#SPJ1
In a billiards game, one player hits the cue ball towards another ball. The cue ball has a mass of 0.1kg and hits the other ball with a velocity of 2m/s. If the collision is completely elastic and the cue ball travels with a velocity of 0.8m/s after the collision, what is the mass and velocity of the other ball?
Answer:
3/70 kg ≈ 0.04286 kg
2.8 m/s
Explanation:
In a perfectly elastic collision, the total momentum of the system is constant, and the difference in velocities changes sign.
We assume the other ball is at rest initially, and that the collision is "head-on." That is, final velocities are in the same direction as the initial velocity of the cue ball. We further assume no energy loss, and that the balls do not rotate.
__
initial momentumAssuming the ball being hit is initially at rest, it contributes no momentum to the system. The total momentum is ...
(0.1 kg)(2 m/s) = 0.2 kg·m/s
__
initial velocity differenceIf the cue ball has velocity v1 and the hit ball has velocity v2, the initial difference of velocities is ...
v1 -v2 = 2 m/s -0 m/s = 2 m/s
__
final velocity differenceAfter the collision, we must have ...
v1 -v2 = -2 m/s . . . . the velocity difference changes sign
v2 = v1 +2 m/s = 0.8 m/s +2 m/s
v2 = 2.8 m/s
The velocity of the other ball is 2.8 m/s after the collision.
__
mass of the other ballThe total momentum after the collision is the same as before, so we must have ...
m1·v1 +m2·v2 = initial momentum
(0.1 kg)(0.8 m/s) +(m2)(2.8 m/s) = 0.2 kg·m/s
m2 = (0.2 kg·m/s -0.08 kg·m/s)/(2.8 m/s) = (0.12/2.8) kg = 3/70 kg
The mass of the other ball is 3/70 ≈ 0.04286 kg.
What's the potential energy for
m= 0.5kg
g=98.1
h=1.5
Answer:
7.36 j
Explanation:
PE = m g h so just mutiply the given values .5 * 9.81 *1.5 = 7.36 j
(assuming 1.5 is in meters)
What are the basic ingredients needed to form a hurricane? (Select all that apply.)
Question 1 options:
warm water
moist air
high pressure
strong winds that come together from different directions
strong winds that come together from different directions
While doing the dishes, you drop an iron skillet that’s very hot (200° C or more) into a sink containing a few inches of water at room temperature. Assume the volume of water has about the same mass as the skillet. It’s found that the increase in temperature of the water is much less than the loss in temperature experienced by the skillet. As a matter of fact, after a minute or two, the water feels only slightly warmer than before the skillet was added. Use the space to write a brief explanation of why this is true.
Remember the fact that every object has a specific amount of latent heat of vaporization
The specific heat capacity of iron and water are different
They may have same mass but not same specific heat capacitySo same amount of temperature can't create same amount of heat .Also water is liquid so heat get transmitted through out the solution.Transverse waves travel at in a string that is subjected to a tension of if the string is long, what is its mass?
The mass of the string is 0.515 kg.
Calculations and Parameters:Given that:
Tension= 60.5NLength of string= 15.9mv= 43.2 m/sm=?To solve for the mass of the string,
v=√(T/ρ) ,(v=43.2m/s , T=60.5N , L=15.9m )43.2= √(60.5/ρ)60.5/ρ= 1866.24ρ= 0.032418Therefore, the mass would be[tex]15.9*0.03242= 0.515448= 0.515[kg][/tex]
Read more about transverse waves here:
https://brainly.com/question/15531840
#SPJ4
What happens to the light when it passes through a converging lens?
a) the light spreads apart
b) the light meets at a point
c) the light is reflected backwards
Answer:
B
Explanation:
the lines WILL meet at a point after crossing focal point
