The angular velcoity of this cylinder when the downward speed of the elevator is 1.2 m/s would be 6 rad/s.
Given the following data:
Radius of cylinder = 0.20 meter.
Linear velocity = 1.2 m/s.
What is angular velocity?Angular velocity can be defined as the rate of change of angular displacement of an object with respect to time. Thus, it is a measure of how fast and quickly an object revolves or rotates relative to another point or how its angular position changes with respect to time.
The formula for angular velcoity.Mathematically, angular velcoity is given by this formula:
[tex]V =r\omega\\\\\omega =\frac{V}{r}[/tex]
Substituting the given parameters into the formula, we have;
[tex]\omega = \frac{1.2}{0.2}[/tex]
Angular velocity = 6 rad/s.
Read more on angular velcoity here: https://brainly.com/question/6860269
The students changed the release distance of the sphere during their investigation. Which statements best describe the purpose for increasing the release distance between the trials? Select all that apply.
A. to indicate balanced forces are acting on the spheres
B. to determine the types of forces acting on the spheres
C. to measure the strength of the force acting on the spheres
D. to change the direction of the force acting on the spheres
E. to observe the effect of unbalanced forces acting on the spheres
Since unbalanced forces acts on the spheres, the aim of increasing the release distance of the spheres is to observe the effect of unbalanced forces acting on the spheres.
What is an experiment?An experiment is a study whose objective is to study cause and effect relationships. In this case, the students had to increase the distance at which the spheres was released.
The aim of increasing the release distance of the spheres is to observe the effect of unbalanced forces acting on the spheres.
Learn more about experiments: https://brainly.com/question/11256472
Which of the following is an example if harmonic motion?
Answer:
"A pendulum swinging back and forth" is an example of harmonic motion
X = Xo cos ω t
Explains the back and forth motion of the pendulum
When you transfer energy to a drum through a drumstick or your handhow does the amount of energy affect the sound the drum makes? Explain using the Crosscutting Concept of Energy and Matter
Answer:
Striking the head of the drum changes its shape and compresses the air inside the shell. The compressed air presses on the bottom head and changes its shape. Then, these changes are transmitted to the drum shell and reflected back, and this action is repeated, creating a vibration. These vibrations of the top and bottom heads create vibrations in the air, which become sound, and eventually, as the head vibrations are dampened, the sound diminishes.
Explanation:
In the photoelectric effect, electrons are ejected by matter only if they are given energy from light of a high enough frequency. It does not matter how bright the light source is; only frequency matters. Which reasoning explains why particles are better than waves for describing this phenomenon?(1 point)
The energy from the waves of light coming from bright lights would add up and free an electron.
The energy from light waves is canceled out by interference at low energies, but not at high energies, so it can free electrons with bright light.
The energy from photons of light would never be enough to free electrons because they don't have the same energy if they are just particles.
The energy from photons of light should be enough to knock out an electron, no matter what the frequency of light is, because it is moving so fast.
Answer:Answer is A:The energy from the waves of light coming from bright lights would add up and free an electron.
Explanation:
1. They collect evidence and make sure that the model can be used with reasoning to explain the evidence.
2. The energy from the waves of light coming from bright lights would add up and free an electron.
3. The spots are the result of interference, which happens with waves but not particles.
4. This is not something that waves do because they need a medium to travel through, while particles do not.
5. When the electromagnetic wave peaks overlap, a bright fringe forms.
I promise this is correct because i failed and this is what it said if this is ever wrong they must have changed the quick check
An object is thrown straight upward from the edge of a building with a velocity of 20m/s. Where will the object be 5s after it was thrown
Explanation:
V = S/t
s =vt
d = 20 x 5
d = 100m
The position of the ball 5 seconds after it was thrown will be 25 m below the edge of building.
What are the three equations of motion?
The three equations of motion are -
v = u + at
S = ut + 1/2at²
v² - u² = 2aS
Given is an object which is thrown straight upward from the edge of a building with a velocity of 20m/s.
Initial velocity [u] = 20 m/s
Acceleration due to gravity [g] = - 10 m/s² (Rounded off 9.8)
At maximum height, the velocity will be 0.
Assume that the time at which the ball reaches max height be T.
Using first law of motion -
v = u + aT
0 = 20 - gT
gT = 20
T = 20/g
T = 20/10
T = 2 sec
Then -
S[max] = 20 x 2 - 0.5 x 10 x 4
S[max] = 40 - 20 = 20 m
At t = 2 sec the ball will be at maximum height. Now at maximum height, the initial velocity of the ball will be 0.
We have to find the position of ball after 3 seconds as after 2 seconds it was at maximum height.
In this case initial velocity will be [u] = 0
Acceleration [a] = 10 m/s²
Time [t] = 3 sec
Using second equation of motion -
S = ut + 1/2at²
S = 0.5 x 10 x 9
S = 45 m
Position of object = [x] = 20 - 45 = - 25 m
The negative sign indicates that the object is now 25 cm below from the edge of building.
Therefore, the position of the ball 5 seconds after it was thrown will be 25 m below the edge of building.
To solve more questions on Kinematics, visit the link below-
https://brainly.com/question/2288973
#SPJ5
How does earths magnetic field protect us from solar flares
Answer:
Earth's magnetic field serves to deflect most of the solar wind, whose charged particles would otherwise strip away the ozone layer that protects the Earth from harmful ultraviolet radiation.
Answer:
Earth's magnetic field serves to deflect most of the solar wind,
whose charged particles would otherwise strip away the ozone layer that
protects the Earth from harmful ultraviolet radiation.
When the wheel of a cart rolls from a smooth sidewalk onto a plot of grass, the interaction of the wheel with the blades of grass slows the wheel. What slows light when it passes from air into glass or water
The light oscillates electrons which then absorbs some of the energy and reemit it thereby causing a delay.
What are Electrons?This is defined as a subatomic particle which has a negative charge. In the glass of water the light oscillates the electrons which absorbs some energy.
The re-emission is what slows light when it passes from air into glass or water.
Read more about Electrons here https://brainly.com/question/13998346
15. What drives the motions of the Earth's
atmosphere system?
A energy from the sun
B surface currents
C weather
D Earth's rotation
describe the ways that people are trying to use technology to protect the environment and increase sustainability.
WILL NAME BRAINLIEST please help
Answer:
One way people are using technology to protect the environment is:
Using digital devices for communicating and storing information means that there is less reliance on paper, which reduces deforestation. Since trees are an important source of oxygen and also absorb carbon dioxide, this further reduces climate change.
Environmental technology has enabled us to capture this naturally occurring energy and convert it into electricity or useful heat through devices such as solar panels, wind, and water turbines.
Explanation:
Have a great of your day
#TheWizzer
15 points!! PLEASE ANSWER! I NEED IT QUICK!
What happens to the energy of a wave if the amplitude of the wave is doubled?
How does the frequency of a wave relate to the energy of the wave?
Answer:
See below ↓
Explanation:
We know that the energy of a wave is directly proportional to the amplitude of a the wave. That means it directly varies, so when one increases/decreases, the other does the same.
Therefore, when the amplitude of a wave is doubled, the energy of the wave is also doubled.
Similarly, in the case of the frequency of the wave, it is also directly proportional to the energy of the wave.
⇒ E ∝ ν
How much magnification is needed to see a nanometer?.
how is the effect of balanced forces different from that of unblanced forces on the motion of an object
Answer:
Balanced forces do not result in any change in motion.
Explanation
forces applied to an object in opposite directions that are not equal in size. Unbalanced forces result in a change in motion. friction the force that opposes the motion or tendency toward motion of two objects that are in contact.
Answer:
balanced forces are equal in size and opposite in direction
A certain 48 V electric forklift can lift up to 7000 lb at a
maximum rate of 76 ft/min. What is its power? Round your
answer to the nearest hundreds.
Based on the information provided, the Power of the electric forklift to the nearest hundred is 12,000 W.
What is the formula for arriving at Power in physics?
The formula for calculating power in physics is given as:
P = E/t; where P = Power, E is energy and t is time in seconds. It is also given as :
P = W/Δt
Recall that power is defined as the amount of work done within a specific amount of time.
Where W = Work and; Δt = time elapsed.
Recall that Work (w) = Force x distance
Force here is usually domiciled in Newtons while distance is usually domiciled in meters.
7000 pounds or Lbs to Newtons is
7000 x 4.4482216153 = 31137.551307 N
So let's convert the distance to Meters.
1 foot = 0.3048m
Therefore, 76ft = 23.1648 m
Thus, Work = 31137.551307 X 23.1648 (That is Force in Newtons x distance in meters.)
Work = 721, 295.148516 N·m
Recall that power is given as:
P = W/Δt
= 721,300/60 seconds
= 12,021.6666667, to the nearest hundred, and we have:
P = 12,000 W
Learn more about Power at:
https://brainly.com/question/24858512
why empty tin-cans ocillating for a longer time
Answer: When you speak into the can, your voice creates air vibrations that travel into the can, vibrate the bottom of the can, which in turn vibrates the string all the way over to the other can, in turn vibrating the other can's bottom, then the air again.
Explanation:
The main difference between a radio wave and a light wave is its:.
Answer:
Speed.
Their speeds are different; Have you ever heard the metaphor the speed of light? For this case, we must turn that into a reality. So, people refer to light speed as the fastest travelling thing in the world, and that is right, unless there is a thing faster than light that was never classified. Unlikely the case. The speed of sound through air travels a lot slower than light. Look at the diagrams below to see what I mean by that.
• • •
As shown in the diagrams, sound speed is WAY slower than light speed!
four pieces of graph paper a ruler two pencils a helper Follow these steps: Choose which person will be the sender (satellite) and which will be the receiver (television). Each person then draws a 10" by 10" square on a piece of graph paper. Draw a grid within the square, so that each small square of the grid is about 1 inch square. This should give you an area with 100 squares in it. The size of the small squares will depend somewhat on the graph paper used - make sure you use some of the lines on the graph paper as guidelines. The sender now draws a simple picture within the 10" x 10" square without letting the receiver see what he or she is drawing. The sender should now “read” the picture to the receiver, using a digital code. If a square on the graph paper is blank, the sender says “Zero”; if the square is filled in or has any mark in it at all, the sender says, “One.” Using this code, the sender starts with the top row and reads from left to right, one square at a time. The receiver, upon hearing this code, transfers the information to his own graph paper. The receiver must mark the graph paper by starting with the top row of squares and going from left to right. If the sender says “zero,” no mark is made. If the sender says “one,” the receiver should fill in the square completely! At the end of the first row, the sender should say, “End row 1,” and repeat this at the end of each row. At the end of the last row, compare the two pictures. Check the results to see how accurate the transfer was. Now, get two more pieces of graph paper and draw 10” by 10” squares on them. This time, your grid size should be close to 1/4 inch rather than one inch. You will have many more squares than before! You can use the same drawing or switch people and the new sender can draw another picture. Follow the same procedure. Describe your results. Compare the accuracy of the two pictures drawn by the receiver. Which one is more precise
Answer:
is there a picture? so I can understand it more and it will be easier for me to answer. thank you
Answer:
The second one is more accurate because we were able to draw more precisely and accurately, the first picture was more of a general idea of the picture and the second picture was more of a detailed version.
Explanation:
I just did this assignment and this is what I turned in so yeah I hope this is good enough, if you need more of an explanation though ill try to lengthen it. =]
m=3000km v=25m/s what’s the momentum?
Answer:
75000kg m/s
Explanation:
Momentum = Mass X Velocity
p = mv
3000 X 25 = 75000 kg m/s
In three to four sentences, explain how climate change could impact the formation of hurricanes. (4 points)
The climate change can directly impact the formation of hurricanes because increasing temperature increases intensity of hurricanes.
How climate change could impact the formation of hurricanes?Evaporation increases as temperatures rise which also causes the transfer of heat from the oceans to the atmosphere. As the storms travel across oceans whose water is warm, they absorb more water vapor and heat which increases rainfall as well as intensity of hurricanes.
So we can conclude that the climate change impacted the formation of hurricanes due to increasing temperature that increases intensity of hurricanes.
Learn more about climate here: https://brainly.com/question/17922964
A force of 20 N is applied tangentially to a wheel of mass 10 kg and diameter 5 m. Calculate the torque applied and angular velocity at the end of 10 second?
Answer:
N = 2010 + 10 + -5 = 20N + -5 = 10 -5 + 20Therefore , the answer is N=20Explanation:
#BrainliestBunchSelect the correct answer from each drop-down menu. nick’s swimming goggles are made of blue plastic. when he straps them on, he notices that the goggles change the color of the objects around him. a white ring buoy appears because the blue plastic all colors of light except blue. only the blue light the ring buoy passes through the blue plastic.
The colors Nick observes through his swimming goggles are because of the colors it absorbs, which are all colors except blue.
Why do we observe different colors?We see or observe different colors because different substances reflect different colors while a absorbing different colors.
The colors of objects are as a result of the color they reflect while absorbing others.
The colors Nick observes through his swimming goggles are because of the color it absorbed.
A white ring buoy appears blue because the blue plastic absorbs all colors of light except blue. Only the blue light of the ring buoy passes through the blue plastic.
Learn more about colors at: https://brainly.com/question/911645
#SPJ4
Am object with a mass of 1298 kg is accelerating at a rate of 17 m/s2 when a net force is applied to it. What is the magnitude of the net force that is acting on the object? Could show how you did it please
Answer: 22,066N
Explanation:
By Newton's second Law of Motion, the force on an object is proprtional to the acceleration of the object. The proportionality constant is the mass of the object:
[tex]F=ma[/tex]
Plug in the mass and accleration of the system:
[tex]F=(1298kg)(17m/s^2)[/tex]
[tex]F=22,066N[/tex]
The units for force are Newtons, or equivalently kg*m/s^2.
Four point charges, each of magnitude 2.38 µC, are placed at the corners of a square 75.2 cm on a side. If three of the charges are positive and one is negative, find the magnitude of the force experienced by the negative charge. The value of Coulomb’s constant is 8.98755 × 10^9 N · m^2/C^2 . Answer in units of N.
Answer:
The Electric Force on Negative Charge is 2.968 N
Explanation:
charge on each corner, q = 2.38 micro coulomb
Side of square, a = 75.2 cm
Coulombic constant, K = 8.98755 x 10^9 Nm²/C²
sides of the square are A,B,C and D
and all sides of a square are equal so
AB = BC = CD = DA = 75.2 cm = 0.752 m
Diagonal, AC = BD = 1.414 x 0.752 = 1.06 m
Electric field at D due to charge at A
EA= Kq÷AB^2
= 8.98755×10^9 × 9.87×10^-6 ÷ 0.752^2
EA= 156863.82 N/C
Similarly Electric field at D due to charge C
EC=Kq÷CD^2
= 8.98755×10^9 ×9.87×10^-6 ÷ 0.752^2
EC= 156863.82 N/C
Electric field at D due to charge at BB
EB=Kq÷BD^2
EB=8.98755×10^9 × 9.87×10^-6 ÷ 1.06^2
EB=78949.01 N/C
Resolve the compoents
Ex = EA + EB cos 45
Ex = 156863.82 + 78949.01 x 0.707
Ex = 212689.2 N/C
Ey = EC + EB Sin 45
Ey = 156863.82 + 78949.01 x 0.707
Ey = 212689.2 N/C
The resultant electric field is
E = 1.414 x 212689.2 = 300787.95 N/C
the electric force on the negative charge is
F = q x E
F = 9.87 x 10^-6 x 300787.95
F = 2.968 N
Ryan holds a ball still at position A and then releases it. His friend stops the ball at position F. The image shows the path of the ball from position A to position F. Identify the kind of energy the ball has at each position. PE
KE
PE and KE
Answer:
See below
Explanation:
a PE only...the ball is not moving
b and c PE and KE
d KE only
e and f PE and KE
The energy of the ball at its highest position is potential energy.
What is law of conservation of energy ?The law of conservation of energy states that, energy can neither be created nor destroyed. Despite this, it is capable of changing its form. The sum of the energies in an isolated system is constant regardless of the types of energy present.
Here,
According to law of conservation of energy, at each position of the ball, it will have some amount of energy.
At point A
The ball is at its highest position, that means maximum height. So, the energy of the ball at that position is potential energy and it doesn't have any kinetic energy.
At points B and C
At these positions the ball is moving downwards. That means the potential energy is being converted into kinetic energy of the ball. So, it has both PE and KE.
At point D
The ball is at the lowest position, on the ground. So, the potential energy is zero. Therefore, it has the kinetic energy.
At points E and F
At these positions, the ball is moving upwards. So, it has both PE and KE.
Hence,
The energy of the ball at its highest position is potential energy.
To learn more about law of conservation of energy, click:
https://brainly.com/question/29775341
#SPJ5
A 2.3-kg toy locomotive is pulling a 1.4-kg caboose. The frictional force of the track on the caboose is 0.46 N backward along the track. If the train is accelerating forward is 3.1 m/s2, what is the magnitude of the force exerted by the locomotive on the caboose
The net vertical force on the caboose (C) is
∑ F[v, C] = F[n, C] - (1.4 kg) g = 0
where F[n, C] is the magnitude of the normal force exerted by the track on the caboose; so we have
F[n, C] = (2.3 kg) g = 13.72 N
which means the coefficient of kinetic friction µ between the caboose and the track is
F[f, C] = 0.46 N = µ (13.72 N) ⇒ µ = (0.46 N) / (13.72 N) ≈ 0.034
and presumably the coefficient is the same for the locomotive.
The net vertical force on the locomotive (L) is
∑ F[v, L] = F[n, L] - (2.3 kg) g = 0
where F[n, L] is the magnitude of the normal on the locomotive, so that
F[n, L] = (2.3 kg) g = 22.54 N
and so the locomotive is opposed by a frictional force with magnitude
F[f, L] = µ (22.54 N) ≈ 0.76 N
Taking the locomotive and caboose together, the net horizontal force on the system is
∑ F[h] ≈ - F[f, C] - F[f, L] + F[engine] = (2.3 kg + 1.4 kg) (3.1 m/s²)
Solve for F[engine] :
F[engine] ≈ (3.7 kg) (3.1 m/s²) + 0.46 N + 0.76 N ≈ 13 N
Which of the following limiting factors would be directly affected by a drought? a. birth/death rate b. immigration c. available niche d. resource supply Please select the best answer from the choices provided A B C D
Answer:
C. answer pa brailest need lang po please
D. Resource Supply this would be directly affected first then the rest would follow after a period of time.
What is the difference between organic and inorganic material?
Organic materials comes from living things while inorganic materials comes from non living things
Organic materials are those composed mainly of carbon they are derived from living things while inorganic materials are derived from non living things sucjh as rocks etc
If the distance between two objects is tripled, what happens
to the gravitational force between them?
A. It decreases to 1/3 its original magnitude.
B. It increases to 9 times its original magnitude.
C. It increases to 3 times its original magnitude.
D. It decreases to 1/9 its original magnitude.
.
Answer:
D)it decreases to 1/9 its original magnitude
For added effect, he takes the monitor up to the roof which is about 84 m above the ground. What is the velocity of the monitor as it hits the ground?
The velocity of the monitor as it hits the ground is equal to 40.58 m/s.
Given the following data:
Height = 84 meters.Scientific data:
Acceleration due to gravity (g) = [tex]9.8 m/s^2.[/tex]How to calculate the velocity.In accordance with the law of conservation of energy, the potential energy possessed by the monitor at the roof top would be equal to the kinetic energy possessed by the monitor at the ground:
[tex]PE=KE\\\\mgh=\frac{1}{2}mv^2\\\\2mgh=mv^2\\\\V=\sqrt{2gh}\\\\V=\sqrt{2 \times 9.8 \times 84}\\\\V=\sqrt{1646.4}[/tex]
V = 40.58 m/s.
Read more on kinetic energy here: brainly.com/question/1242059
Mars moves in an elliptical orbit around the Sun. The location of the Sun relative to this ellipse is
Answer:
It is when the focus of the ellipse that is closer to the point where Mars is moving the fastest.
Explanation:
I hope it helps! Have a great day!
Anygays-
If we want to get an estimate for the average distance from the sun to a planet, how might we go about doing this? (Choose one answer):
1. By measuring the eccentricity of the orbit, which is directly
related to the size of the orbit's ellipse and hence the distance
from the sun.
2. Measure its orbital period (the time it takes to complete a
single orbit) because Kepler's third law allows us to calculate
the orbit's semi-major axis from this.
3. This cannot be done without sending a probe to the planet.
We have done this for some planets already, but not others.
The distance between the sun and a planet can be gotten by measuring its orbital period and applying the Kepler's law.
Kepler's lawsAccording to Keplers third law; the cube of the distance between a planet and the sun is directly proportional to the square of the period of the same planet.
Having said that, we know that we can best measure the distance between the sun and a planet by measuring its orbital period and applying the Kepler's law.
Learn more about Kepler's law: https://brainly.com/question/27132799
