Answer:
The given metal sample is not aluminum because its density is 3.0 g/cm³ while density of aluminum is 2.7 g/cm³.
Explanation:
Given data:
Density of aluminum = 2.7 g/cm³
Mass of metal sample = 52.0 g
Volume of metal sample = 17.1 cm³
which sample is that = ?
Solution:
The given problem will be solve through density formula.
d = m/v
d = density
m = mass
v= volume
Now we will put the values in formula.
d = 52.0 g/ 17.1 cm³
d = 3.0 g/cm³
It is given in question the density of aluminum is 2.7 g/cm³. The given metal sample is not aluminum because its density is 3.0 g/cm³.
Which of the following is least like the others on the list?
a. Estrogen
b. Cholesterol
c. Glycogen
d. Triglyceride
Answer:
Glycogen
Explanation:
a,b,d are lipidic and glycogen is glucide
Soil is an essential component of the earth's crust. It enabled life to exist and
provides the services necessary for human survival. What is the effect of soil
erosion? What will you do to protect the community?
Answer:
The consequences of soil erosion go beyond the loss of fertile land. It has contributed to increased runoff and sedimentation in streams and rivers, clogging these waters and causing declines in fish and other animals.
We can protect the community from soil erosion by -:
Maintaining a good, perennial cover for plants. From mulching. Planting a crop for coverExplanation:
SOIL EROSION -: The soil erosion mechanism is both natural and man-made. In nature, this refers to the removal of the top layer of soil caused by wind and water, while human activity may increase exposure to these elements.
MAJOR EFFECTS OF SOIL EROSION -:
Pollution and Low Water Quality -: Sedimentation is created by gradual soil erosion, a process by which rocks and minerals in the soil are separated from the soil and deposited elsewhere, often in streams and rivers. Soil contaminants, such as fertilizers and pest control agents, often settle in the streams and rivers to protect crops. Water contaminants contribute to low water quality, including drinking water quality, if the contaminants are not removed prior to ingestion. As sunlight can get through the sediment, sedimentation also leads to the excessive growth of algae. According to the World Wildlife Fund, high levels of algae drain too much oxygen from the water, resulting in the mortality of marine species and reduced fish stocks.Structural Issues and Mudslides -: Soil erosion contributes to mudslides, impacting the stability of buildings and roadways and their structural integrity. Mudslides affect not only soil-supported structures, but also buildings and roads that are in the path of slides. Mudslides occur when, as a result of the intensity and energy of heavy rainfall, fine sand , clay, silt, organic matter and soil spill off the sides of hills and slopes. According to Envirothon, a program of the National Conservation Foundation and North America's largest high school environmental education competition, this runoff happens rapidly, because there is not enough time for the surface to reabsorb or catch the eroding soil.Flooding and Deforestation -: Deforestation erodes soil — the removal of trees to create space for towns and agriculture. Trees help to maintain soil in place, so winds and rains drive the loose soil and rocks to streams and rivers when they are uprooted, resulting again in unnecessary sedimentation. The thick layers of sediment keep streams and rivers from flowing smoothly, ultimately contributing to flooding. Excess water, especially during rainy seasons and when the snow melts, gets trapped by the sediment and has nowhere to go except back on land.The Deterioration of Soil -: Soil nutrient depletion is often the result of poorly performed cultivation and cultivation practices that contribute to soil erosion. For natural vegetation and agricultural purposes, excessive irrigation and obsolete tilling practices decrease the amount of nutrients in the soil and make it less fertile.PROTECTION OF COMMUNITY FROM SOIL EROSION -
Maintaining a good, perennial cover for plants -: Your perennial garden's care and upkeep need not be difficult or overwhelming. A blend of certain simple horticultural values with common sense and a good eye is a great part of good gardening.MULCHING -: The amount of water that evaporates from your soil will be reduced by mulch, greatly reducing the need to water the plants. By breaking up clay and permitting better movement of water and air through the soil. Mulch supplements sandy soil with nutrients and enhances its ability to retain water. PLANTING A CROP FOR COVER -: Winter rye in vegetable gardens, for instance. This includes annual grasses, small grains , legumes and other forms of vegetation that have been planted to provide temporary vegetative cover. Cover crops are also often tilled as a 'green manure' crop under serving.Some of the effects of erosion on the environment includes :
Washing away of soil nutrients Pollution of the waterways Blockage of drainages degradation of soilWays to protect the earth from soil erosion includes
planting of cover crops Mulching use of crush rocks on certain areasSoli erosion is the washing away of the top soil of the earth's crust which can be caused by the movement of wind , water or ice over the surface of the earth crust. this action leads to the degradation of the soil
Soli erosion leads to the washing away of soil nutrients and the pollution of waterways because of the deposition of soil particles into the waterways. the washed away soil can also block the drainages leading to a bigger problem ( flooding ).
Some of the steps that would help protect the soil from the effects of soil erosion are planting of cover crops , mulching and use of crush rocks on areas that are used most frequently to prevent the washing away of the soil.
Hence we can conclude that the effects of soil erosion are Washing away of soil nutrients , Pollution of the waterways, Blockage of drainages while ways to protect the earth from erosion are ;planting of cover crops, Mulching, use of crush rocks on certain areas
Learn more : https://brainly.com/question/24104585
Problem PageQuestion Methanol and oxygen react to form carbon dioxide and water, like this: (l)(g)(g)(g) At a certain temperature, a chemist finds that a reaction vessel containing a mixture of methanol, oxygen, carbon dioxide, and water at equilibrium has the following composition: compoundamount Calculate the value of the equilibrium constant for this reaction. Round your answer to significant digits. Clears your work. Undoes your last action. Provides information about entering answers.
Answer:
[tex]Kc=3.8x10^{-7}[/tex]
Explanation:
Hello.
In this case, for the chemical reaction:
[tex]2CH_3OH(l)+3O_2(g)\rightarrow 2CO_2(g)+4H_2O(g)[/tex]
We write the equilibrium expression including the gaseous or aqueous species only, that is why the methanol is not included due to heterogeneous equilibrium:
[tex]Kc=\frac{[CO_2]^2[H_2O]^4}{[O_2]^3}[/tex]
Whereas each gaseous species is powered to its stoichiometric coefficient (number before the species). In such a way, considering the equilibrium masses of carbon dioxide (44 g/mol), water (18 g/mol) and oxygen (32 g/mol) to be 1.56 g, 2.28 g and 3.33 g respectively, we compute the moles as we need molar concentrations in the equilibrium constant calculation:
[tex]n_{CO_2}=1.56g/(44g/mol)=0.0355mol\\\\n_{H_2O}=2.28g/(18g/mol)=0.127mol\\\\n_{O_2}=3.33 g/(32g/mol)=0.104mol[/tex]
Thus, into the 9.3.L vessel, the equilibrium concentrations are:
[tex][CO_2]=\frac{0.0355mol}{9.3L}=0.00382M[/tex]
[tex][H_2O]=\frac{0.127mol}{9.3L}=0.0137M[/tex]
[tex][O_2]=\frac{0.104mol}{9.3L}=0.0112M[/tex]
Therefore, the equilibrium constant shown with two significant figures is:
[tex]Kc=\frac{(0.00382M)^2(0.0138M)^4}{(0.0112M)^3} \\\\Kc=3.8x10^{-7}[/tex]
Best regards.
How does a scientist make two solutions with the same molarity? A By dissolving the maximum amount of each substance in the B. By dissolving the same number of grams of each substance in the OC. By dissolving 1 mole of each substance in enough water to make same volume of water same volume of water sure dissolving is complete By dissolving the same number of nmoles of each substance in the same volume of water OD.
Answer: The answer is “ By dissolving the same number of nmoles of each substance in the same volume of water ”
Explanation:
By dissolving the same number of moles of each substance in the same volume of water. Hence, option D is correct.
Define the molarity of a solution.Molarity (M) is the amount of a substance in a certain volume of solution. Molarity is defined as the moles of a solute per litres of a solution.
Adding water to a solution and the number of moles of the solvent stay the same while the volume increases.
If there is no flow of solute into or out of the volume during the addition of the solvent, the number of moles of solute remains the same.
Hence, option D is correct.
Learn more about moles here:
brainly.com/question/8455949
#SPJ2
Oxides of sulfur are important in atmospheric pollution, arising particularly from burning coal. Use the thermodynamic data at 25 C given in the appendix to answer the following questions. a. In air, the oxidation of SO2 can occur: 1 2O2(g) SO2(g) S SO3(g). Calculate rG 298
Answer:
-70.87 kJ
Explanation:
Let's consider the following balanced equation.
1/2 O₂(g) + SO₂(g) ⇄ SO₃(g)
We can calculate the standard Gibbs free energy of reaction (ΔG°r) from the standard Gibbs free energies of formation (ΔG°f) using the following expression.
ΔG°r = 1 mol × ΔG°f(SO₃(g)) - 1/2 mol × ΔG°f(O₂(g) - 1 mol × ΔG°f(SO₂(g))
ΔG°r = 1 mol × (-371.06 kJ/mol) - 1/2 mol × 0 kJ/mol - 1 mol × (-300.194 kJ/mol)
ΔG°r = -70.87 kJ
(a) At what substrate concentration would an enzyme with a kcat of 30.0 s−1 and a Km of 0.0050 M operate at one-quarter of its maximum rate? (b) Determine the fraction of Vmax that would be obtained at the following substrate concentrations [S]: ½Km, 2Km, and 10Km. (c) An enzyme that catalyzes the reaction X ⇌ Y is isolated from two bacterial species. The enzymes have the same Vmax but different Km values for the substrate X. Enzyme A has a Km of 2.0 μM, and enzyme B has a Km of 0.5 μM. The plot below shows the kinetics of reactions carried out with the same concentration of each enzyme and with [X] = 1 μM. Which curve corresponds to which enzyme?
The missing graph is in the attachment.
Answer: (a) [S] = 0.0016M
(b) Vmax = 3V; Vmax = [tex]\frac{3V}{2}[/tex]; Vmax = [tex]\frac{11V}{10}[/tex]
(c) Enzyme A: black graph; Enzyme B = red graph
Explanation: Enzyme is a protein-based molecule that speed up the rate of a reaction. Enzyme Kinetics studies the reaction rates of it.
The relationship between substrate and rate of reaction is determined by the Michaelis-Menten Equation:
[tex]V=\frac{V_{max}[S]}{K_{M}+[S]}[/tex]
in which:
V is initial velocity of reaction
Vmax is maximum rate of reaction when enzyme's active sites are saturated;
[S] is substrate concentration;
Km is measure of affinity between enzyme and its substrate;
(a) To determine concentration:
[tex]0.25V_{max}=\frac{V_{max}[S]}{0.005+[S]}[/tex]
[tex]0.25V_{max}(0.005+[S])=V_{max}[S][/tex]
[tex]0.00125+0.25[S]=[S][/tex]
0.75[S] = 0.00125
[S] = 0.0016M
For a Km of 0.005M, substrate's concentration is 0.0016M.
(b) Still using Michaelis-Menten:
[tex]V=\frac{V_{max}[S]}{K_{M}+[S]}[/tex]
Rearraging for Vmax:
[tex]V_{max}=\frac{V(K_{M}+[S])}{[S]}[/tex]
(b-I) for [S] = 1/2Km
[tex]V_{max}=\frac{V(K_{M}+0.5K_{M})}{0.5K_{M}}[/tex]
[tex]V_{max}=\frac{V(1.5K_{M})}{0.5K_{M}}[/tex]
[tex]V_{max}=[/tex] 3V
(b-II) for [S] = 2Km
[tex]V_{max}=\frac{V(K_{M}+2K_{M})}{2K_{M}}[/tex]
[tex]V_{max}=\frac{V(3K_M)}{2K_M}[/tex]
[tex]V_{max}=\frac{3V}{2}[/tex]
(b-III) for [S] = 10Km
[tex]V_{max}=\frac{V(K_{M}+10K_M)}{10K_M}[/tex]
[tex]V_{max}=\frac{V(11K_{M})}{10K_{M}}[/tex]
[tex]V_{max}=\frac{11V}{10}[/tex]
(c) Being the affinity between enzyme and substrate, the lower Km is the less substrate is needed to reach half of maximum velocity.
Km of enzyme A is 2μM and of enzyme B is 0.5μM.
Enzyme B has lower Km than enzyme A, which means the first will need a lower concnetration of substrate to reach half of Vmax.
Analyzing each plot, notice that the red-coloured graph reaches half at a lower concentration, therefore, red-coloured plot is for enzyme B, while black-coloured plot is for enzyme A
What is the frequency of a photon with an energy
Answer:
option b is correct option = (6.76×10¹⁴ Hz)
Explanation:
Given data:
Wavelength of photon = 4.42×10⁻⁷ m
Speed of light = 2.99×10⁸ m/s
Frequency of radiation = ?
Solution:
Formula:
Speed of wave = frequency × wavelength
Now we will rearrange this formula.
frequency = Speed of wave / wavelength
f = c/ λ
f = 2.99×10⁸ m/s / 4.42×10⁻⁷ m
f = 0.676×10¹⁵ Hz (s⁻¹ = Hz)
f = 6.76×10¹⁴ Hz
Thus option b is correct option.
The net ionic equation for the reaction between aqueous nitric acid and aqueous sodium hydroxide is ________. The net ionic equation for the reaction between aqueous nitric acid and aqueous sodium hydroxide is ________. H+ (aq) + Na+ (aq) + OH- (aq) → H2O (l) + Na+ (aq) HNO3 (aq) + OH- (aq) → NO3- (aq) + H2O (l) H+ (aq) + HNO3 (aq) + 2OH- (aq) → 2H2O (l) + NO3- (aq) H+ (aq) + OH- (aq) → H2O (l) HNO3 (aq) + NaOH (aq) → NaNO3 (aq) + H2O (l)
Answer:
H+ (aq) + OH- (aq) → H2O (l)
Explanation:
The net ionic equation is the main reaction going on in the system. The reaction between nitric acid and sodium hydroxide is a neutralization reaction.
In a neutralization reaction, the main reaction is the combination of hydrogen ions and hydroxide ions to form water. This reaction has been shown in the answer box.
Which of the following is the best description of matter?
Answer:
description of matter:
Matter is everything around you. Atoms and compounds are all made of very small parts of matter. Those atoms go on to build the things you see and touch every day. Matter is defined as anything that has mass and takes up space (it has volume).
please give me brainliest if I answered you question correctly
7. Baking soda is a common household chemical compound. The chemical formula
NaHCO3 represents the matter needed to produce baking soda. Baking soda is
considered a compound because. WILL GIVE BRAINLIST
All sound begins with a vibration. Sound travels through the air to your ears which our brains interpret as sound. How are guitar strings like the particles in matter?
1.They are gold
2.They vibrate
3.They are a liquid
Pick One.
"the tamil naducoast recives winter rainfall "why?
Answer:
GDSSHCVJDJD
Explanation:
(b) in the direct hydration method, ethene reacts with steam. The equation for this reaction is C2H4 + H2O = C2H5OH
State the temperature and pressure used in this reaction.
Answer:
20 degree and 4000000N
You have 100. grams of potassium fluoride (KF). How many moles do you have? (1 mole KF = 58.09 g KF) *
1.00 mole KF
1.50 mole KF
1.72 mole KF
3.57 mole KF
Answer:
I think its 1.72 (:
Explanation:
3. True or False. A compound is formed when two or more elements are
False
True
1) Consider the dissolution of CaCO3 compound in aqueous medium.
a) Write down the equation of the chemical reaction that represents this dissolution.
b) Write the expression of the equilibrium constant for this reaction.
c) Explain how the addition of a certain amount of sodium carbonate to
water would affect this balance
2) The equilibrium constant for the reaction 2 SO2(g) + O2(g) 2 SO3(g) has a Kc value = 2.5x10^10 to 500 K. Find the kc value for each of the following reactions at the same temperature
(a) SO2(g) +1/2 O2 SO3(g).
(b) SO3(g) SO2(g)+1/2 O2(g)
(c) 3SO3(g)+ 3/2 O2(g) 3SO3(g)
3) A reaction mixture consisting of 0.400 mol H 2 and 1.60 mol I 2 was prepared in a 3.00 L flask and heated. In balance, 60.0% of the hydrogen gas reacted. What is the equilibrium constant for the reaction H 2(g) + I 2(g) 2 HI(g) at this temperature?
Explanation:
1a) CaCO₃(s) → Ca²⁺(aq) + CO₃²⁻(aq)
1b) Remember, solids are not included in the equilibrium equation.
K = [Ca²⁺] [CO₃²⁻]
1c) Adding CO₃²⁻ ions will shift the reaction to the left, producing CaCO₃(s) until equilibrium is restored.
2) 2 SO₂(g) + O₂(g) → 2 SO₃(g)
Kc = 2.5×10¹⁰ = [SO₃]² / ([SO₂]² [O₂])
2a) SO₂(g) + ½ O₂(g) → SO₃(g)
Kc = [SO₃] / ([SO₂] [O₂]^½)
Kc² = [SO₃]² / ([SO₂]² [O₂])
Kc² = 2.5×10¹⁰
Kc ≈ 1.58×10⁵
2b) SO₃(g) → SO₂(g) + ½ O₂(g)
Kc = [SO₂] [O₂]^½ / [SO₃]
Kc = 1 / (1.58×10⁵)
Kc ≈ 6.33×10⁻⁶
2c) 3 SO₂(g) + ³/₂ O₂(g) → 3 SO₃(g)
Kc = [SO₃]³ / ([SO₂]³ [O₂]^³/₂)
Kc = ([SO₃] / ([SO₂] [O₂]^½))³
Kc = (1.58×10⁵)³
Kc ≈ 3.95×10¹⁵
3) H₂(g) + I₂(g) → 2 HI(g)
K = [HI]² / ([H₂] [I₂])
Make an ICE table.
[tex]\left[\begin{array}{cccc}&Initial&Change&Equilibrium\\H_{2}&0.400&-0.240&0.160\\I_{2}&1.60&-0.240&1.360\\HI&0&+0.480&0.480\end{array}\right][/tex]
K = (0.480)² / (0.160 × 1.360)
K = 1.06
What is the organism that kills and eats other organisms for food called?
Group of answer choices
Host
Parasite
Predator
Prey
Which of the following are properties of substances with matter? (2 points)
a
Mass and volume
b
Length and width
c
Shape and color
d
Size and texture
In a chemistry laboratory, a student filled a 10.0 L container with two (2) different gases. The
gases are nitrogen gas taken from 24.0 L container at 2.00 atm and 12.0 L container of
oxygen at 2.00 atm. If the temperature of the gases is 273 K, calculate the partial pressure
of both gases in the resulting mixture and the total pressure.
Answer:
[tex]P_N=1.33atm\\\\P_O=0.67atm[/tex]
[tex]P_T=2.00 atm[/tex]
Explanation:
Hello.
In this case, the first step is to compute the moles of nitrogen and oxygen given their initial P, T and V conditions via the ideal gas equation:
[tex]n_{N}=\frac{P_{N}V_{N}}{RT} =\frac{2.00atm*24.0L}{0.082\frac{atm*L}{mol*K}*273K}\\ \\n_{N}=2.144molN\\\\n_{O}=\frac{P_{O}V_{O}}{RT} =\frac{2.00atm*12.0L}{0.082\frac{atm*L}{mol*K}*273K}\\ \\n_{O}=1.072molO[/tex]
After that, since the total volume now, once the mixture is formed is the addition between the initial volumes (12.0 L + 24.0 L) is 36.0 L, the partial pressure of each gas turns out:
[tex]P_N=\frac{2.144mol*0.082\frac{atm*L}{mol*K}*273K}{36.0L}\\\\P_N=1.33atm\\\\P_O=\frac{1.072mol*0.082\frac{atm*L}{mol*K}*273K}{36.0L}\\\\P_O=0.67atm[/tex]
Thus, the final total pressure is:
[tex]P_T= P_N+P_O=1.33atm+0.67atm\\\\P_T=2.00 atm[/tex]
Best regards.
What do you notice about the relationship between the force strength and the size of the velocity change? HELP MEEEEE
Velocity change increases as the force increases.
Even though this question is incomplete, but we can approach it from the stand point of Newton's second law of motion.
According to this law, force is directly proportional to change in velocity.
F = m(v - u)/t
F = force applied
m = mass of the body
v = final velocity of the body
u = initial velocity of the body
t = time taken
This means that velocity change increases as force increases.
Learn more: https://brainly.com/question/19860811
Which of the following terms best reflects the process by which humans store memories ?
Answer:
there are no term
Explanation:
what are the term
Do all variations help organisms survive
Answer:
Yes
Explanation:
Or maybe i dont really know what it mean
Which of the following statements is true?
A:Transverse waves move particles parallel to the direction of energy.
B:Longitudinal waves move particles at right angles to the direction of energy.
C:Transverse waves usually occur in solids, while longitudinal waves occur in liquids and gases.
D:All of the above.
Answer:B
Explanation:
Without SALT or SUGAR, does the water conduct electricity?
Which locations are likely to have subatomic particles that are constantly in motion:
A) 1 and 2
B) 2 and 3
C) 1 and 3
D) 2 and 4
The answer is "2 and 4"
Location 2 and 4 are likely to have subatomic particles that are constantly in motion,thus the correct option is D.
In physics, a subatomic particle is a particle smaller than an atom.According to the Standard Model of particle physics, a subatomic particle can be either a composite particle, which is composed of other particles (for example, a proton, neutron, or meson), or an elementary particle, which is not composed of other particles Particle physics and nuclear physics study these particles and how they interact.
Experiments show that light could behave like a stream of particles (called photons) as well as exhibiting wave-like properties. This led to the concept of wave–particle duality to reflect that quantum-scale particles behave like both particles and waves; they are sometimes called wavicles to reflect this.
Thus, the correct option is D.
Learn more about subatomic particles,here:
https://brainly.com/question/1527888
#SPJ4
What is the main limitation of flame tests? Check all that apply.
1. It takes a long time to perform
2.Inability to determine the identity of mixtures
3.Some metals have similar flame test results
4.Color is subjective
Answer:
All of the above are correct.
Explanation:
The Flame Test Shortcomings
Small quantities of most molecules can not be measured by the examination.
The signal's intensity ranges from one test to the next.
The test findings are impaired by impurities or toxins.
The test is not capable of differentiating between all components.
I NEED HELPPP THIS DUE TODAY!!!! IT IS URGENT!!
Which health issue is associated with exposure to indoor air pollution?
O stroke
O hair loss
diabetes
O skin cancer
Answer:
stroke
Explanation:
. Give two everyday examples of the thermal energy of a substance being increased.
Answer:
• the warmth from the sun
• the heat from another a heater
• A cup of hot chocolate
•baking in an oven
Two everyday example that we say for the thermal energy of a substance being increased are, faster movement of the substances and boiling if liquids as well light absorption.
What is thermal energy?Thermal energy is a form of energy generated by heating up a substance. It can also be generated by the movement of its particles.
Vibrating molecules increases the thermal energy of a substance. Similarly, when we heat a substance it acquires more thermal energy.
Another way of increasing thermal energy is light absorption by the substance. Thermal energy associated with light increases the temperature of of the system which is absorbed the light.
Hence, the two ways by which thermal energy of a substance is increased are heating or boiling and faster movement.
To learn more about thermal energy, refer the link below:
https://brainly.com/question/3022807
#SPJ2
Why does a water molecule have a bent shape?
Answer:
The oxygen atom has lone pairs of electrons.
Explanation:
