Complete question is:
Tech A says that when testing a relay winding with an ohmmeter, it should show the winding is open. Tech B says that the solenoid closes a set of heavy contacts that send current flow to the starter motor. Who is correct?
Answer:
Tech B is correct
Explanation:
First we need to know the basic working principle or relays. It is basically an electromagnetic switch controlled by a coil. When voltage is applied to the coil, the generated current produces an electromagnetic pulling the internal contacts and activating the switch.
Now, lets review each statement:
Tech A says that when testing a relay winding with an ohmmeter, it should show the winding is open.This is False. The winding is made of a conductive filament, like copper, so testing with an ohmmeter will show a closed circuit, usually with a low resistance value.
Tech B says that the solenoid closes a set of heavy contacts that send current flow to the starter motor.This is True. As the explanation above, the solenoid produces an electromagnetic field that activates the contacts, switching on or off the desired circuit.
Copenhagen is located 780 km North and 810 km East of Paris. A flight from Paris to Copenhagen takes two hours. Typically the wind blows from East to West over Europe, but the speed varies. For one particular flight, the wind speed was 165 km/h. What is the magnitude of vpa, the plane's velocity with respect to the air
Answer:
[tex]V_{pa}=690km/hr[/tex]
Explanation:
In order to solve this problem, we can start by drawing a diagram of what the problem looks like. (See attached picture).
We can treat this as a vector problem, so we can start by finding the velocities of the plane with respect to the earth as it goes north and east. Velocity is found by using the following formula:
[tex]Velocity=\frac{distance}{time}[/tex]
so
[tex]V_{paN}= \frac{780km}{2hr}[/tex]
[tex]V_{paN}=390 km/hr[/tex]
Since air isn't affecting the north direction of the plane, we will keep this as the velocity due north.
Now let's find the velocity of the plane with respect to the earth towards the east:
[tex]V_{pE}=\frac{810km}{2hr}[/tex]
[tex]V_{pE}=405 km/hr [/tex]
In this case, since the wind is blowing from east to west, then it affects directly the velocity of the plane with respect to the earth, so we can use the following formula to determine the Velocity of the plane with respect to the air in the eastern direction:
[tex]V_{paE}-V_{a}=V_{pE}[/tex]
so we can solve this for the velocity of the plane on the air towards the east, so we get:
[tex]V_{paE}=V_{pE}+V_{a}[/tex]
so we get:
[tex]V_{paE}=405 km/hr + 165km/hr[/tex]
[tex]V_{paE}=570 km/hr[/tex]
So now we can use this data to find the velocity of the plane with respect to the air:
[tex]V_{pa}=\sqrt{V_{paN}^{2}+V_{paE}^{2}}[/tex]
so we get:
[tex]V_{pa}=\sqrt{(390km/hr)^{2}+(570km/hr)^{2}}[/tex]
[tex]V_{pa}=690.65 km/hr[/tex]
What force controls the movement of the planets around the sun, holds together stars grouped in galaxies, and galaxies grouped in clusters? Thoroughly explain your answer, making sure to include an example and describe how this force keeps planets in orbit. Make sure to write at least 3-5 sentences and proper conventions (spelling, grammar, punctuation, etc.) to respond. Put all answers in your own words
Answer:
Gravity creates stars and planets by pulling together the material from which they are made.
Explanation: This is all I have I don't know if my test is the same a others though.
Answer:
Gravity
Explanation:
Gravity keeps things together. It is a force that attracts matter towards it. Anything with mass creates gravity
Given Fa = 38N [E25oN] and Fb = 45 N [S25oE], calculate the force Fc needed so that the
summation of all the forces is zero.
Answer:
58.9 N [W24.8°N]
Explanation:
The vectors are at right angles, so the magnitude of their sum is ...
√(38² +45²) ≈ 58.9 . . . . newtons
The angle Fc makes with Fa can be found using the arctangent:
angle between Fa and Fc = arctan(45/38) ≈ 49.8°
The direction required for the sum of the vectors to be zero is the opposite of [E(49.8° -25°)S], so is [W24.8°N]
The vector that makes the sum zero is 58.9 N [W24.8°N].
For a sound coming from a point source, the amplitude of the sound is inversely
proportional to the distance. If the displacement amplitude of an air molecule in a sound
wave is 3.2x10 m at a point 1 m from the source, what would be the displacement
amplitude of the same sound when the distance increases to 4 m?
(Question 3)
Answer ) Sound level equation
The intensity of a sound wave is related to its amplitude squared by the following relationship: I=(Δp)22ρvw I = ( Δ p ) 2 2 ρ v w . Here Δp is the pressure variation or pressure amplitude (half the difference between the maximum and minimum pressure in the sound wave) in units of pascals (Pa) or N/m2.
1.
In any solution, the part in the greatest quantity or volume is called the ___________.
solute
solvent
2.
The most common type of solution is a ___________-___________ solution.
liquid-solid
liquid-gas
3.
Air is a ___________-____________ solution.
solid-gas
Answer:
1) solvent
2) liquid-solid
3) gas - gas
Explanation:
1) A solution is the homogenous mixture of two or more substances in such a way that its components are uniformly distributed. In any solution, the solvent make up the greatest quantity or volume while the solute is of lesser quantity.
2) liquid-solid is the most common type of solution.
3) A gas solution can be a gas dissolved in a gas, or a liquid dissolved in a gas, or a solid dissolved in a gas. Air is a gas - gas solution, it is composed of oxygen and other dissolved gases in nitrogen
Answer:
B, A, B
Explanation:
had this USA test prep
Which of the following statements best represents a comparison of the two motions shown on the graph?
A. the top line represents a greater acceleration
B. the bottom line represents a greater acceleration
C. the top line represents a greater velocity
D. the bottom line represents a greater velocity
Answer:
C. the top line represents a greater velocity
Explanation:
The graph is a distance - time graph.
The distance is on the y-axis and time is on the x - axis.
For this graph, the slope is the velocity.
The steeper the line, the higher the velocity or the higher the slope. Since the upper line is steeper, it will have a higher slopeHence a greater velocityThe lower line is not so steep and its slope is lesser compared to the upper one.
When a 1.7 m tall man stands, his brain is 0.5 m above his heart.
If he bends so that his brain is 0.4 m below his heart, by how much does the blood pressure in his brain
changes? Note: PHeart=13.3x103
Pa.
Answer:
9.54 Kpa
Explanation:
Given :
Pheart = 13.3 * 10^3
Density of blood (ρ) = 1060 kg/m³
Difference in height of brain and heart in standing position = - 0.5
Difference in height of Brain a d heart in bending position = 0.4
g = acceleration due to gravity = 10 m/s²
Blood pressure of brain in standing position:
Pheart + ρ*g(-0.5)
13.3 * 10^3 + 1060 * 10 * - 0.5
13300 - 5300 = 8000 pascal = 8Kpa
Blood pressure of brain in bending position:
Pheart + ρ*g(0.4)
13.3 10^3 + 1060 * 10 * 0.4
13300 + 4240 = 17540 Pa = 17.54 Kpa
17.54Kpa - 8Kpa
= 9.54 Kpa
A sports car accelerates from rest to 42 m/s in 6.2 s, what is its acceleration? (6.8 m/s) with proof please
Answer:
Explanation:
As the car Started from rest means that Initial Velocity "Vi = 0 m/s" and final Velocity is given "Vf = 42m/s". Time is given "t = 6.2s"
Acceleration is required a =?
Use Formula;; a = [tex]\frac{Vf-Vi}{t}[/tex]
a = [tex]\frac{42-0}{6.2}[/tex]
a = 6.7741 m/s² ≈ 6.8 m/s²
Mark me as brainliest if you got it...
A 60.0g bullet is fired from a gun with 3150j of kinetic energy find its velocity
Explaining How Temperature
Does sound travel faster in a warm room or a cold room?
Explain your answer.
Intro
Do
Answer:
Explanation:
Sample Response: Sound travels faster in a warm room because temperature affects the speed of a wave. In a warm room, the particles of air move faster and have higher chances of bumping into each other, which then increases the instances of energy transfer.
A model rocket flies horizontally off the edge of a cliff at a velocity of 80.0m/s. If the canyon below is 128.0 m deep, how far from the edge of the cliff does the model rocket land?
a. 112m
b. 225m
c. 337m
d. 409m
Answer:
c. 337
Explanation:
can someone answer my question
A 0.500-kg object connected to a light spring with a spring constant of 20.0 N/m oscillates on a frictionless horizontal surface. (a) Calculate the total energy of the system and b) the maximum speed of the object if the amplitude of the motion is 3.00 cm. (c) Compute the kinetic and potential energies of the system when the displacement is 2.00 cm
Answer:
a = 0.009 J
b = 0.19 m/s
c = 0.005 J and 0.004 J
Explanation:
Given that
Mass of the object, m = 0.5 kg
Spring constant of the spring, k = 20 N/m
Amplitude of the motion, A = 3 cm = 0.03 m
Displacement of the system, x = 2 cm = 0.02 m
a
Total energy of the system, E =
E = 1/2 * k * A²
E = 1/2 * 20 * 0.03²
E = 10 * 0.0009
E = 0.009 J
b
E = 1/2 * k * A² = 1/2 * m * v(max)²
1/2 * m * v(max)² = 0.009
1/2 * 0.5 * v(max)² = 0.009
v(max)² = 0.009 * 2/0.5
v(max)² = 0.018 / 0.5
v(max)² = 0.036
v(max) = √0.036
v(max) = 0.19 m/s
c
V = ±√[(k/m) * (A² - x²)]
V = ±√[(20/0.5) * (0.03² - 0.02²)]
V = ±√(40 * 0.0005)
V = ±√0.02
V = ±0.141 m/s
Kinetic Energy, K = 1/2 * m * v²
K = 1/2 * 0.5 * 0.141²
K = 1/4 * 0.02
K = 0.005 J
Potential Energy, P = 1/2 * k * x²
P = 1/2 * 20 * 0.02²
P = 10 * 0.0004
P = 0.004 J
The total energy of the system is 0.009 J
The maximum speed of the object is 0.19 m/s
The kinetic and potential energies of the system when the displacement is 2.00 cm are 0.005 J and 0.004 J respectively
The object is under simple harmonic motion.
Given that the mass of the object m =0.5 kg , spring constant k = 20N/m
(a) The total energy of the system in SMH,
[tex]E=\frac{1}{2}kA^2[/tex]
If the amplitude of motion A = 3cm = 0.03m, then total energy
[tex]E=\frac{1}{2}*20*0.03*0.03 J\\\\E = 0.009J[/tex]
E = 0.009J is the total energy of the system.
(b) maximum speed of the object
the maximum kinetic energy of the object = total energy of the object
[tex]\frac{1}{2} m(v_{max})^{2} =E\\\\v_{max}=\sqrt{2E/m}\\\\v_{max}=\sqrt{2*0.009/0.5}\\\\v_{max}=0.19m/s[/tex]
0.19 m/s is the maximum speed
(c) KE and PE when x = 2cm = 0.02m
potential energy at x = 0.02
[tex]PE=\frac{1}{2}kx^2\\\\PE=\frac{1}{2}*20*0.02*0.02\\\\PE= 0.004J[/tex]
Now, Kinetic energy + potential energy = total energy
KE + PE = E
KE = E - PE
KE = 0.009J - ).004J
KE = 0.005J
The kinetic and potential energies are 0.005 J and 0.004 J respectively.
Learn more about SHM:
https://brainly.com/question/13897406
What is the available energy content, in joules, of a battery that operates a 2.00-W electric clock for 18 months
Answer:
93312000 Joules
Explanation:
Energy can be explained as the capacity for doing work. And can be expressed as
E= pt....................eqn(1)
Where
E= Energy in Joules
P= power in Watt= 2.00W
t= time in seconds
Time= 18 months, which can be converted to "seconds" as;
18 months = [ 18 monthsx 30 days x 24 hours x 60 min x 60 sec] = 46656000
Then
time= 46656000 seconds
Power=2 watt
If we substitute into equation (1) we have
Energy = 2 watt × 46656000 seconds
Energy= 93312000 Joules
Define friction. Prove that tangent of angle of friction is equal to coefficient
of friction.
Answer:
Explained below
Explanation:
- Friction is the force that opposes the motion between two or more objects/surfaces in contact with each other.
- On an inclined plane, the coefficient of static friction is given by the relation;
μ = F_max/F_n
Where;
F_max is maximum frictional force before slip = mg sin θ
F_n is normal force = mg cos θ
Thus;
μ = mg sin θ/mg cos θ
μ = tan θ
Myra is expected to be a great wife, an attentive mother, and an innovative designer. Sometimes she is overwhelmed by trying to juggle all of these pieces of her life. She can't spend as much time with her husband and kids whe
she is working a lot. Her work falters if she stays home to be with her family. What does Myra's scenario MOST accurately represent?
A. role conflict
B. agents of socialization
C. role strain
D. master status
Answer:
A
Explanation:
Myra is struggling to be a great wife, attentive mother, and an innovative designer all at the same time.
Myra's scenario is most accurately represented by role conflict because she is struggling to be a great wife, attentive mother, and an innovative designer all at the same time.
What is a role conflict?When there are expectations put on an individual that are not compatible with one another in relation to their profession or position, this may lead to role conflict. When a someone feels as if they are being tugged in several ways while attempting to react to the multiple statuses they hold, they are experiencing role conflict.
The work-family conflict, also known as the struggle one has when torn between the demands of personal and professional responsibilities, is perhaps the clearest illustration of role conflict.
Learn more about role conflict, here:
https://brainly.com/question/19168315
#SPJ5
Can someone please help?
Answer:
1: E
2: A
3: C
4: B
5: D
Explanation:
The largest planet in the solar system is Jupiter,with a diameter of 71,398 km. What is the diameter of Jupiter in centimeters?
Answer:7139800000
Explanation:
The largest planet in the solar system is Jupiter. Its equatorial diameter is approximately 143,000 kilometres (ca. 88,856 mi miles).
What diameter of Jupiter in centimetres?Jupiter is a gas giant because it consists largely of gas and liquid, as opposed to solid substance. With an equator diameter of 142,984 kilometres (88,846 mi), it is the solar system's biggest planet.
About 80% of Jupiter is hydrogen, and 20% is helium. Over a solid core, a thick layer of liquid hydrogen is covered by swirling gas. At 1,000 kilometres below the cloud layer's outer edge, there is a lot of pressure. The hydrogen gas changes into a liquid there.
Therefore, By squaring the scale factor for length, the scale factor for area may be calculated. Consequently, s2 is the scale factor for area. If the situation is the opposite, a solution to the issue under investigation is offered. The area scale factor is 2.
Learn more about Jupiter here:
https://brainly.com/question/20979520
#SPJ2
State one activity in our daily life by using the characteristic of iron rod.
Answer:
In our house ceilings.
Explanation:
In our daily life, iron rod is used in the construction of ceiling of our homes which made our ceiling stronger enough to make it multi story. It is extensively used in big construction projects such as multi story buildings and other tall buildings etc. So we can say that iron rod is used for construction of big houses and buildings.
Why do you think psychology courses like this one are often requirements of so many different programs of study ?
Answer:
Because psychology helps you understand the mind of someone else. It can teach you about traits people may have based on what you see, or a likely personality of someone based on their history, and so many other things. Psychology helps you understand a whole other person, and understanding people is a big part in many things such as medicine, STEM, nursing, teaching, and many other things. Understanding people and the things around you is a necessary skill.
Various radial points on a rotating Ferris wheel have: I. different linear velocities II. different angular velocities III. equal linear velocities IV. equal angular velocities
Answer:
I) True, II) False, III) False, IV) True
Explanation:
In this exercise, it is asked to answer different statements, for this we will use the relationship between angular and linear velocity
v = w r
let's review the claims
I) True. From the initial equation we see that the linear velocity depends on the radius
II) False. All points rotate with the same angular velocity
III) False. Linear velocity changes with radius
IV) True. The angular velocity of all points is the same
At various radial points on a rotating Ferris wheel have, different linear velocity (True), different angular velocity (false), equal linear velocity (false) and equal angular velocity (True).
The angular velocity of a rotating Ferris is calculated as follows;
[tex]\omega = \frac{v}{r} = 2\pi N[/tex]
The linear velocity of a rotating Ferris is calculated as follows;
v = ωr
where;
v is the linear velocityr is the radius of the Ferrisω is the angular velocityThe linear velocity increases with increase in radius.
Thus, we can conclude that, at various radial points on a rotating Ferris wheel have;
different linear velocitiesconstant angular velocityLearn more about angular velocity here: https://brainly.com/question/540174
If you can run at a speed of 8 miles per hour and you want to run to the store 16 miles away, how
much time will it take you to get there?
Equation needed
work
Answer:
16÷8=2
Explanation:
if you run 8 mi an hour than in 16 mi you would have run 2 hours
A 600 kg elevator starts from rest. It moves upward for 4.50 s with constant acceleration until it reaches its cruising speed, 1.75 m/s. (a) What is the average power of the elevator motor during this period
Answer:
408.33watts
Explanation:
Power is expressed according to the formula
Power = work done/time
Power = force × distance/time
Power = Force× velocity
Find the force
F = mv/t
F = 600×1.75/4.5
F = 1050/4.5
F=233.33N
Get the power
Power = 233.33×1.75
Power = 408.33watts
Hence the average power of the elevator motor during this period is 408.33m/s
John is conducting an experiment that involves melting ice cubes. Which of the following is most important for John to collect reliable data?
A.The outcome needs to be controlled.
B.An unbiased observer must witness the experiment.
C.Technology needs to be used to determine the results.
D.Only one variable should be tested during the experiment.
Answer:
I think A not sure took this test 5 yrs ago
Explanation:
Heat is conducted in the axial direction through a cylinder by heating one end. If the diameter of the cylinder is doubled (but the cylinder material, cylinder length, and the temperatures at both ends of the cylinder are unchanged), how will the heat transfer rate be changed
Answer:
hello your question is incomplete attached below is the complete question with the options
answer : Doubling the Diameter increases the heat transfer rate by a factor of 4 ( B )
Explanation:
The heat transfer in the axial direction of the cylinder can be calculated/determined as attached below
[tex]\frac{q_{2} }{q_{1} } = \frac{(2D)^2}{D^2}[/tex]
[tex]q_{2}[/tex] = 4[tex]q_{1}[/tex] ( This shows that Doubling the diameter increases the heat transfer rate by a factor of 4 )
What are homophones?
words that are spelled incorrectly several times in one paper
words that are spelled exactly as they sound
words that have different meanings depending on how they are used
words that have the same sound but different spellings and meaning
Answer:
words that have the same sound but different spellings and meaning
Explanation:
Homophones are generally words that sound the same but have different spellings and even meaning.
For example the words new and knew are homophones.
They have the same sound when pronouncing but their meaning is different.
Also, the words bawl and ball are homophones.
We see that both words have very similar pronunciation but their meanings are completely different.
A 12.0-kg box is being pushed from the bottom to the top of a frictionless ramp. When the box is pushed at a constant velocity, the non-conservative pushing force does 58.0 J of work. How much work is done by the pushing force when the box starts from rest at the bottom and reaches the top of the same ramp with a speed of 1.50 m/s
Answer:
work done = 71.5 J
Explanation:
Given that,
Energy = Fifty eight J
Mass of box = 12.0 Kg
Speed = 1.5 m/s
U = work done
The external force acts solely on the box and also the earth system. conjointly note that the work done by external force
= modification of energy of the system
U = work done - K
Also recall that the box is moving with constant speed therefore, there will not be modification in acceleration, hence, there'll be no modification in K.E..
Therefore, K is adequate to zero.
K= 0
U = work done = energy
U = 58.0 J
work done by pushing force = K + U
work done = final K.E. - initial K.E. + U ........1
Initial K.E. = zero
Substitute the mandatory values into equation one
work done = 1/2m v² - zero + U
work done= 0.5 x 12.0 x 1.5² + 58.0
= 13.5+58.0
work done = 71.5 J
The world one by the pushing force is 71.5 J
Define joule conversion factor?
Explanation:
Joule, unit of work or energy in the International System of Units (SI); it is equal to the work done by a force of one newton acting through one metre. ... In electrical terms, the joule equals one watt-second—i.e., the energy released in one second by a current of one ampere through a resistance of one ohm.
you discover that Eunice and Bert's go-kart weighs 400 kg and will have a 675 n force actung on it. how fast will it accelerate (to nearest tenth)
Answer:
200
Explanation:
subtract it it's 275
51. If two cylinders of dissimilar geometry are connected together to form a closed hydrostatic system, why would one cylinder piston travel a greater distance than the other
Answer:
see that for the same pressure the displaced height in each cylinder is different because its diameter is different. Pascal's principle
Explanation:
The pressure on a system is given by the relations
P = ρ g h
P = F / A
where ρ is the density of the liquid, h the height and A the area
The expressions above we see that if for the same height the pressure is the same regardless of the shape of the cylinder.
With the second expression we see that if the system has a different area, the pressure is
P = [tex]\frac{F_{1} }{A_{1} } = \frac{F_{2} }{A_{2} }[/tex]
where we use subscript 1 for one body and subscript 2 for the other body
F₁ = [tex]\frac{A_{1} }{A_{2} } F_{2}[/tex]
The cylinder displacement is
V = A h
where V is the volume and h the height, in general the liquids are incompressible therefore the displaced volume is constant in the two bodies
V = A₁ h₁ = A₂ h₂
[tex]\frac{A_{1} }{A_2} = \frac{h_2}{h_1}[/tex]
we substitute
F₁ = [tex]\frac{h_2}{h_1}[/tex] F2
From here we see that for the same pressure the displaced height in each cylinder is different because its diameter is different.
If the diameter is the same, the offset height is the same
Define specific charge of an electron. Write its value.
Answer:
The specific charge is defined as a charge by mass ratio i.e e/m. The charge on an electron (e) = 1.602 X 10-19C. The mass of the electron (m) = 9.1×10−31Kg.
