stephen schwartz created the musical godspell as well as __________.

-1^10

centi=10 mm and mm=1/10=10^-1 cm

Considering the definitipn of current, voltage, power, and Ohm's law,

The flow of electricity through an object, such as a wire, is known as current (I). Its unit of measurement is amps (A). So current is a measure of the speed at which the load passes through a given reference point in a specified direction.

The conductive force (electrical pressure) behind the flow of a current is known as voltage and is measured in volts (V) (voltage can also be referred to as the potential difference or electromotive force). That is, voltage is a measure of the work required to move a charge from one point to another.

Resistance (R) refers to the resistance or opposition that an element has to the passage of electric current. It is represented by the symbol Ω and indicates the resistance that an element offers to the passage of electricity.

This means that the greater the resistance to the passage of current, the lower the intensity or amount of electricity that passes through this conductor.

The resistance that is measured in ohms.

Ohm's law indicates that the current through a circuit is directly proportional to its voltage or voltage and inversely proportional to the resistance it presents.

Mathematically, Watt's law is expressed:

[tex]I=\frac{V}{R}[/tex]

So if you want to find resistance, the expression for its calculation is:

[tex]R=\frac{V}{I}[/tex]

In this case, you know:

Replacing:

[tex]R=\frac{5.26 V}{0.41 A}[/tex]

Solving:

R= 12.8 ohms

Habiba is right. The resistance is 12.8 ohms.

Learn more:

can u type in english?????

Answer:

atoms combine

Explanation:

The force of static friction acting on  the box is greater than the applied horizontal force.

Force is known to be the reason for motion according to Newton's first law of motion. An object will move when it has been acted upon by an external force.

In this case, a box lying on a table has been acted upon by an external force of  12 newton but the box remains at rest. This simply means that the applied force is less than the force of static friction acting on  the box.

Learn more about motion: https://brainly.com/question/8898885

Answer:

Washign machine and swingset

Explanation:

Answer:

~186

Explanation:

1) R= (V^2 × sin A ) /g

V=90 m/a

A= 13°

g= 9.8 or 10 (I will take 9.8 for right result)

R= (90^2 × sin 13) / 9.8 = 185.928932672 ~ 186

Answer:

You can see how forces can stack on one another by comparing the normal force of the bottom most rock to the normal force of the upper most rock.

Explanation:

Say you have 3 rocks all with mass m=3kg

These 3 rocks will all have the gravitational force of -29.4N (multiply 3kg by -9.8m/s^2)

If none of the rocks are stacked, then they all have the same normal force as well (29.4N)

However, stack them, and see how their normal forces change.

m1 will continue to have a normal force of 29.4N

m2 will now have a normal force of 58.8

m3 will now have a normal force of 88.2

Though they all retain the same gravitational force, their normal force changes depending on the forces acting down on them.

Mass 1 have no forces acting downwards other than gravity.

Mass 2 has the force of mass 1 and gravity acting down on it.

Mass 3 has the force of mass 1, mass 2, and gravity acting down on it.

Answer:

A-) Both are pure substances each containing one type of compound

Answer:

Wind is caused by differences in the atmospheric pressure. When a difference in atmospheric pressure exists, air moves from the higher to the lower pressure area, resulting in winds of various speeds.

Our Earth is a rotating planet. Fast moving air is deflected by the Coriolis effect, except exactly on the equator. This defines the direction of cyclones, hurricanes, and typhoons rotation. The wind flow around a large cyclone is counterclockwise in the Northern Hemisphere and clockwise in the Southern Hemisphere.

Wind forms when the sun heats one part of the atmosphere differently than another part. This causes expansion of warmer air, making less pressure where it is warm than where it is cooler. Air always moves from high pressure to lower pressure, and this movement of air is wind.

The high is west of you, and the low is east of you. (If you're in the northern Hemisphere.)

Answer:

ở đâu?

Explanation:

................

If an object has a balanced force on it, there is a possibility that the object may be in a position i.e. there is no change in speed and direction of the body.

If the forces acting on an object is balanced, it means that the net force acting on the body is zero.

According to Newton's law of motion, an object will continue in a state of motion in a straight line unless acted upon by an external force.

This external force might be a balanced or unbalanced force. Hence if an object has a balanced force on it, there is a possibility that the object may be in a position i.e. there is no change in speed and direction of the body.

Learn more here: https://brainly.com/question/20835245

Answer:

A

Explanation:

Every atom of an element has its own mass and volume as the atom is the smallest fundamental unit of the matter, therefore the correct answer is option C.

Anything which has mass to keep the same when comparing the hardness of the solid and occupies space is known as matter, mainly there are four states of matter solid liquid gases, and plasma.

As given in the problem statement we have to find the true statement from the given options that is true for every atom of an element,

The size of an atom of an element is a very small order of magnitude so it can not be seen with a magnifying glass, therefore, option A is not the correct response.

Thus, every atom of an element has its own mass and volume as the atom is the smallest fundamental unit of the matter, therefore the correct answer is option C.

To learn more about the matter here, refer to the link ;

brainly.com/question/9402776

#SPJ2

Answer:C (198 seconds)

Explanation: The cyclist makes the first lap in (180.00 - 6.00) = 174.00 seconds. The average time per lap for all three circuits is (600.00 - 6.00) = 594/3 = 198 seconds.

The initial velocity of the book before its hits the ground is 14.2 m/s.

The given parameters;

The initial velocity of the book is calculated as follows;

h = ut + ¹/₂gt²

where;

1.5 = 3u + (0.5 x 9.8 x 3²)

1.5 = 3u + 44.1

3u = 1.5 - 44.1

3u = -42.6

[tex]u = \frac{-42.6}{3} \\\\u = -14.2 \ m/s\\\\u = 14.2 \ m/s \ downwards[/tex]

Thus, the initial velocity of the book before its hits the ground is 14.2 m/s.

Learn more here:https://brainly.com/question/17784708

Answer:

(Hope this helps can I pls have brainlist (crown)☺️)

Explanation:

Lifting a saturated package causes it to expand and cool, resulting in vapour condensation. Condensation will release latent heat, partially counteracting the cooling. As a result, a saturated parcel's adiabatic lapse rate is smaller than an unsaturated parcel's.

Because moist air ascending condenses off its water vapour, the moist adiabatic lapse rate is lower than the dry adiabatic lapse rate (once saturation is attained). The air is considered to be saturated when the dew point temperature and air temperature are identical.

Answer:

hii bee bbtym tayo as a friend huhuhuhu

Answer:

F = q V X B

Using the right hand rule (right hand screw) turn V into B to get direction of force which in this case is down

If V is east and F is down then one can see that B must be directed towards  the south - turn V into B (south) and F will be directed downwards.

Answer:

[tex]{ \boxed{ \rm{pressure = \frac{weight}{area} }}} \\ \\ { \rm{pressure = \frac{200}{2} }} \\ \\ { \underline{ \underline{ \rm{ \: \: pressure = 100 \: pascals \: \: }}}}[/tex]

Answer:4.96[tex]cm^{3}[/tex]

Explanation: Density is [tex]\frac{Mass}{Volume}[/tex]

so you are now looking for volume.

Volume= Density x Mass so

Volume = (5.78g) x(1.15g/ [tex]cm^{3} \frac{x}{y}[/tex]) =4.96[tex]cm^{3}[/tex]

The final temperature of the water is 106.0 °C

From the question,

We are to determine the final temperature of water.

From the formula

Q =mcΔT

Where Q is the quantity of heat

m is the mass of substance

c is the specific heat capacity of substance

and ΔT is the change in temperature

Also,

ΔT = T₂ - T₁

Where T₂ is the final temperature

and T₁ is the initial temperature

Then, the formula can be written as

Q =mc(T₂ - T₁)

From the question

Q = 7500 J

m = 250 g

T₁ = 98.8 °C

Putting the parameters into the formula, we get

7500 = 250 × 4.184 (T₂ - 98.8)

(NOTE: specific heat capacity of water, c,= 4.184 J/g °C)

7500 = 1046 (T₂ - 98.8)

7500 = 1046T₂ - 103344.8

Then,

1046T₂ = 7500 + 103344.8

1046T₂ = 110844.8

∴ T₂ = 110844.8 ÷ 1046

T₂ = 105.9701 °C

T₂ ≅ 106.0 °C

Hence, the final temperature of the water is 106.0 °C.

Learn more here: https://brainly.com/question/13439286

The coefficient of friction between the soap and the floor is 0.081

If Juan steps on the soap with a force of 493 N, this is her weight, W. This weight also equals the normal reaction on the floor, N.

We know that frictional force F = μN where μ = coefficient of friction between soap and floor.

So, μ = F/N

Since F = 40 N and N = W = 493 N,

μ = F/N

μ = 40 N/493 N

μ = 0.081

So, the coefficient of friction between the soap and the floor is 0.081

Learn more about coefficient of friction here:

https://brainly.com/question/13923375

This question involves the concepts of uniform speed motion and average speed.

The average speed for the entire trip is "26.67 mi/h".

First, we need to find out the total time taken for the entire trip. For that purpose, we will break the entire trip into two halves of uniform speed motion:

[tex]Total\ Time = t_1+t_2\\\\Total\ Time = \frac{s_1}{v_1}+\frac{s_2}{v_2}\\\\Total\ Time = \frac{40\ mi}{20\ mi/h}+\frac{40\ mi}{40\ mi/h}\\\\Total\ Time = 2\ h + 1\ h\\Total\ Time = 3\ h[/tex]

Now, the average speed for the entire trip will be:

[tex]Average\ Speed = \frac{Total\ Distance}{Total\ Time}\\\\Average\ Speed =\frac{80\ mi}{3\ h}[/tex]

Average Speed = 26.67 mi/h

Learn more about average speed here:

https://brainly.com/question/12322912?referrer=searchResults

The attached picture explains the concept of average speed.