Someone help this is a test and i need to finish this quick i will give brainliest of it lets me

Someone Help This Is A Test And I Need To Finish This Quick I Will Give Brainliest Of It Lets Me

Answers

Answer 1

Sorry, I don't know but I think the correct answer is the first option.


Related Questions

4. A gas's solubility is best in a liquid solvent when the solution is under high or low pressure

Answers

Answer:

low pressure

Explanation:

A 0.750 kg hammer is moving horizontally at 7.00 m/s when it strikes a nail and comes to rest after driving it 1.00 cm into a board. (a) Calculate the duration of the impact in seconds. (Enter a number.) s (b) What was the average force in newtons exerted downward on the nail

Answers

Answer:nh

0.750 kg hammer is moving horizontally at 7.00 m/s when it strikes a nail and comes to rest after driving it 1.00 cm into a board.

relationship between the length (l) and ohmic conductor, its thickness (d) and the opposition (R) it offers a current passage​

Answers

Answer:

Ohm’s Law states that current is proportional to voltage; circuits are ohmic if they obey the relation V=IR.

Explanation:

LEARNING OBJECTIVES

Contrast shape of current-voltage plots for ohmic and non-ohmic circuits

When converted to a household measurement, 9 kilograms is approximately equal to a

Answers

Answer:

D) 19.8 lbs

Explanation:

1kg in household measurement is equal to 35.274 ounces. 35.274*9=317.466 ounces.

1kg is also equal to 2.205 lbs. 9*2.205=19.8416

9 kg is also equal to 9000 grams, but grams are not a part of the household measurement system

a) 9000 grams. b) 9000 ounces. c) 19.8 ounces. d) 19.8 pounds.

This leaves us with 19.8 lbs

how much work is done by a crane that lowers 1000 N of material a distance of 150 m?

Answers

Answer:

Force= 1000 Newtons. Distance= 150 metres. Work= 150000 Joules. So, the work done by crane that lowers 1000 Newton's of a material a distance of 150 meters is 150000 Joules.

Starting from rest, a student pulls a (25.0 A) kg box a distance of (4.50 B) m across the floor using a (134 C) N force applied at 35.0 degrees above horizontal. The coefficient of kinetic friction is 0.220 between the floor and the box. Find the work done by the pulling force. Give your answer in joules (J) and with 2 significant figures.

Answers

A 25.0 kg box is moved 4.50 m by a force of 134 N applied at 35.0° above horizontal. The work done by the pulling force is 4.9 × 10² J.

Starting from rest, a student pulls a 25.0 kg box a distance of 4.50 m across the floor using a 134 N force applied at 35.0 degrees above horizontal.

We can calculate the work  (W) done by the pulling force using the following expression.

[tex]W = F \times d \times cos\theta = 134 N \times 4.50 m \times cos35.0\° = 4.9 \times 10^{2} J[/tex]

where,

F: puling forced: displacementθ: angle between F and d

The friction between the floor and the box. does not influence the work done by the pulling force.

A 25.0 kg box is moved 4.50 m by a force of 134 N applied at 35.0° above horizontal. The work done by the pulling force is 4.9 × 10² J.

Learn more: https://brainly.com/question/25064916

PLZ!!!!!!!!!!!!!!!!!!!! HELP, I'll mark brainliest, JUST HELP!!!!!!!!!!!!!!!!


1. A rocket has a mass of 0.8 kg and an engine that provides 100 N of force. A second rocket is being designed to use the same engine but accelerate at half the rate of the first rocket. What is the mass of the second rocket?

a. 0.4 kg
b. 1.6 kg
c. 2.4 kg
d. 0.8 kg


2. Which of the following would be a situation with unbalanced forces?

a. Two people pulling on the same side of a wheelbarrow
b. A team of players in tug of war pulling on the rope, each team with equal numbers of people pulling with equal strength
c. Two people of opposite sides of a big tire. One pushes the tire and one pulls it with equal force
d. Two people not touching a crate that is sitting stationary.


3. Why is it generally easier to push a heavy object that is already moving instead of the same heavy object that is stationary

a. The force of gravity on the object is different if it is stationary or not.
b. The force of friction on the object is different if it is stationary or not
c. The force of the push on the object is different if it is stationary or not
d. The normal force on the object is different if it is stationary or not.

Thanks In Advance!! (I will mark brainliest) :)

Answers

Answer:

1. A. 0.4 kg

2. B. A team of players in tug of war pulling on the rope, each team with equal numbers of people pulling with equal strength

3.  If an object is stationary the net force is zero.

3. B. The force of friction on the object is different if it is stationary or not

Explanation:

2. If two tug of war teams were pulling with the same force, neither team would move the rope would be at a stand still.

Answer:

The above person to the right is correct except for Number 2. The answer for that will be a.

Explanation:

Remember that equal is a big hint that the scenario is balanced forces since all forces are canceling out thus the object doesn't move. In a. two people are pulling a wheel barrel on the same side. This means one side has more force than the other hence the wheel barrel moves.

12. Suppose the polar bears were running on land instead of swimming. if the polar bear runs
at a speed of about 5.5m/s how far will it travel in 55 seconds?

Answers

the polar bear will travel 302.5m

Câu 1. Trong dao động điều hoà, phát biểu nào sau đây là không đúng ?
A.Cứ sau một khoảng thời gian T (chu kì) thì vật lại trở về vị trí ban đầu.
B.Cứ sau một khoảng thời gian T thì vận tốc của vật lại trở về giá trị ban đầu.
C.Cứ sau một khoảng thời gian T thì gia tốc của vật lại trở về giá trị ban đầu.
Cứ sau một khoảng thời gian T thì biên độ của vật lại trở về giá trị ban đầu

Answers

Answer:

whatttttttttttt

Explanation:

the ಠᴥಠಠᴥಠಠᴥಠಠᴥಠಠᴥಠಠᴥಠಠᴥಠಠᴥಠ

help pls will give brainiest :)

Answers

Answer:

use a flight sim

How do I do these three parts ?what are the answers I’ve been trying for days

Answers

Answer:

Explanation:

ASSUMING the clay is moving horizontally and friction is negligible.

momentum is mass times velocity

9a)

m₁v + m₂(0) = m₁vf + m₂vf

            m₁v = (m₁ + m₂)vf

               vf = m₁v / (m₁ + m₂)

9b)

ASSUMING the positive direction is also the original direction of the clay ball

m₁v + m₂vb = (m₁ + m₂)vf

vf = (m₁v + m₂vb) / (m₁ + m₂)

9c)

vf = (0.37(25) + 4.6(3.4)) / (0.37 +4.6)

vf = (9.25 + 15.64) / 4.97

vf = 5.0080482897...

vf = 5.0 m/s

A mini car of mass 750kg has a head on collision with suv of mass 1200kg traveling at 40m/s.Both cars stop dead.How fast was the mini car traveling

Answers

Answer:

Explanation:

Conservation of momentum

Final momentum is zero

1200(40) + 750v = (1200 + 750)(0)

v = - 1200(40)/750

v = - 64 m/s

The negative sign means the mini car was traveling in the opposite direction of the SUV

A student is asked to calculate the centripetal acceleration of a hummingbird that makes a complete circle in 0.43 seconds. If the circle has a radius of 0.25 m, what is
the correct setup for determining the centripetal acceleration of the hummingbird?
(3.65m/s)2/0.25m
(3.65m/s)2-0.43
O (0.435)2 / 25m
O (0.432.25m

Answers

The centripetal acceleration of the hummingbird is [tex]\frac{(3.65)^2}{0.25} = 53.29 \ m/s^2[/tex]

The given parameters;

time of motion of the hummingbird, t = 0.43 sradius of the circle, r = 0.25 mnumber of revolution of the hummingbird = 1 rev per 0.43 s

The angular speed of the hummingbird is calculated as follows;

[tex]\omega = \frac{1 \ rev}{0.43 \ s} \times \frac{2\pi \ rad}{1 \ rev} =14.61 \ rad/s[/tex]

The linear speed of the hummingbird is calculated as follows;

v = ωr

v = 14.61 x 0.25

v = 3.65 m/s

The centripetal acceleration of the hummingbird is calculated as follows;

[tex]a_c = \frac{v^2}{r} \\\\a_c = \frac{(3.65)^2}{0.25} \\\\a_c = 53.29\ m/s^2[/tex]

Thus, the centripetal acceleration of the hummingbird is [tex]\frac{(3.65)^2}{0.25} = 53.29 \ m/s^2[/tex]

Learn more here:https://brainly.com/question/11700262

What happened to an enzyme’s structure as it exceeds the typical human body temperature

Answers

Enzymes. ... This is because heat energy causes more collisions, with more energy, between the enzyme molecules and other molecules. However, if the temperature gets too high, the enzyme is denatured and stops working. A common error in exams is to write that enzymes are killed at high temperatures.

A massive launcher sends a projectile vertically upwards from the surface of a planet of mass M and radius R. You may assume that this planet has no atmosphere. Part A If the projectile is launched at the escape speed, how do the magnitudes of its initial KE and gravitational potential energy (GPE) compare

Answers

Answer:

It can be shown that the potential energy of an object at the surface of the planet would be -G M / R if the potential at infinity is chosen to be zero.

Kinetic energy of G M / R would be required for the escape speed of such an object. The total energy in all such cases is zero.

This can easily be seen by considering the speed of an object falling from infinity towards the planet - the total energy will remain zero if it was zero when the object started to fall.

The potential at infinity is set to zero while the kinetic energy will be [tex]\rm \frac{GM}{R}[/tex] and total energy will be zero.

What is escape speed?

Escape speed is the minimum speed required for a free, non-propelled object to escape from the gravitational pull of the main body and reach an infinite distance from it in celestial physics.

It is proven that if the potential at infinity is set to zero, the potential energy of an item on the planet's surface is [tex]\rm \frac{-GM}{R}[/tex].

The escape speed of such an item would necessitate kinetic energy will be [tex]\rm \frac{GM}{R}[/tex]. In all of these circumstances, the total energy is zero.

Consider the speed of an item falling from infinity towards the planet: if the total energy was zero before the thing began to descend, the total energy will stay zero.

Hence the potential at infinity is set to zero while the kinetic energy will be [tex]\rm \frac{GM}{R}[/tex] and total energy will be zero.

To learn more about the escape speed refer to the link;

https://brainly.com/question/14178880

What does it mean when my teacher asks me to "use appropriate figures"?

Answers

Answer:

In science

Explanation:

When a teacher tells you so use the appropriate figures. He/she means to use the proper amount of Sig figs or Significant digits.

Example: Is the picture

In the example the answer is 7.31 because you have to take the less number of significant digits

Answer:

figures that are relevant or suitable for the question asked

A football is kicked with a velocity of 5 m/s at an angle of 53° above the horizontal. What is its speed at the
maximum height?
A) 3 m/s
B) 6 m/s
C) 9 m/s
D) 12 m/s
E) 15 m/s

Answers

A is the correct answer

How long does it take light from a camera to travel to the face of someone standing 7 meters away?

Answers

The time taken for the light to travel from the camera to someone standing 7 m away is 2.33×10¯⁸ s

Speed is simply defined as the distance travelled per unit time. Mathematically, it is expressed as:

Speed = distance / time

With the above formula, we can obtain the time taken for the light to travel from the camera to someone standing 7 m away. This can be obtained as follow:

Distance = 7 m

Speed of light = 3×10⁸ m/s

Time =?

Time = Distance / speed

Time = 7 / 3×10⁸

Time = 2.33×10¯⁸ s

Therefore, the time taken for the light to travel from the camera to someone standing 7 m away is 2.33×10¯⁸ s

Learn more: https://brainly.com/question/14988345

The first motor abilities a new born exhibits are

Answers

Answer:

here your answer

i am sorry if wrong

A dry cell gives static electricity true or false?

Answers

Answer:

False

Explanation:

What forces act on an airplane to keep it in the air? If the airplane is traveling at a constant velocity, what could be said about the magnitudes of the forces? ​

Answers

Let's see

[tex]\\ \sf\longmapsto \overrightarrow{drag}[/tex]

[tex]\\ \sf\longmapsto \overleftarrow{Thrust}[/tex]

[tex]\\ \sf\longmapsto Lift\:Force\uparrow[/tex]

[tex]\\ \sf\longmapsto Acceleration\:due\:to\: gravity\downarrow[/tex]

Net force is 0

Incisors (front teeth) act as wedges in the human body. Which change would increase the mechanical advantage of incisors?
1 a decrease in the distance of the teeth from the fulcrum,
2 an increase in the distance of the teeth from the fulcrum,
3 an increase in the thickness at the widest part of the teeth and no change in the length of the teeth,
4 an increase in the length of the teeth and no change in the thickness at the widest part of the teeth

Answers

To increase the mechanical advantage of incisors (front teeth) so that they act as wedges in the human body is through 2. an increase in the distance of the teeth from the fulcrum.

 

The decrease in the distance will decrease the mechanical advantage of incisors. The increase in the thickness at the widest part of the teeth will not necessarily support the incisors to become more effective wedges.  

 

Thus, incisors will acquire some mechanical advantage by increasing the force that it exerts. This advantage can be achieved by increasing the distance of incisors from the fulcrum.

Learn more: https://brainly.com/question/10464622

Answer:

4 aka D

Explanation:

How are Classical and positivist theories similar and different?

Answers

Answer: PLease see Explanation

Explanation:The key idea behind this theory was to use scientific methods to understand criminality and crime. ... The major difference between the two theories are that classical school is mainly based on free will and suggests that crime as a choice, whereas positivism criminology argues that crime is not a choice.

Please get me 5 star and 1 heart

In 1962 measurements of the magnetic field of a large tornado were made at the Geophysical Observatory in Tulsa, Oklahoma. If the magnitude of the tornado's field was B = 17.50 nT pointing north when the tornado was 9.10 km east of the observatory, what current was carried up or down the funnel of the tornado? Model the vortex as a long, straight wire carrying a current. A (conventional current) flowing ---Direction--- the tornado.

Answers

Answer:

796.25 A

Explanation:

B= (μI)/(2πr)

I= (B*2πr)/(μ)

μ= 4π*10^-7

I= ((17.50*10^-9)(2π)(9.10*10^3)) / (4π*10^-7)

= 796.25 A

A (conventional current) flowing "DOWN" the tornado.

Is snowflakes forming in a cloud a chemical or physical change

Answers

Answer:

Physical change.

A snowflake is still considered water whether its liquid or solid.

Answer:

mark me as brainliest !! PHYSICAL CHANGE

Explanation:

A snowflake is composed of ice, which is water in the solid phase. Water is a chemical compound of oxygen and hydrogen atoms.

please help me
7. If microsecound = 0.5, how much force must be applied to a spring (spring constant of 0.8 N/m) which is attached to a block of wood (mass = 4.0 kg) in order to just begin to move the block?​

Answers

Answer:

Explanation:

Your question is quite confusing, particularly the information about microsecond = 0.5.

I'm going to ASSUME that you mean coefficient of static friction μs = 0.5

unfortunately typing a subscript "s" is very difficult and probably leads to such confusion.

I will also ASSUME that the block, and spring, and force vector are all horizontal.

If the force is slowly increased until the block slips, the spring will compress until the force on each end equals the maximum static friction force. As we are not concerned with the compression distance, only the force, we can ignore the spring constant information and simply find the maximum available static friction force.

F = μN

F = μmg

F = 0.5(4.0)(9.8)

F = 19.6 N

Not that it matters, but the spring will have extended or compressed 19.6/0.8 = 24.5 m, which is a very long and very light spring

Ex 3) A tennis player lobs the tennis ball up in the air during a serve at a rate 3 m/s.
How long will it take the tennis ball to reach its maximum height?

Answers

10 seconds is the time it will take to reach maximum height

Jonathan wants to separate stones, insects and other unwanted materials in his mixture of grains and corn. What technique of separating mixture is appropriate

A. Winnowing
B. physical manipulation
C. Filtering
D. Magnetism​

Answers

Answer:

What is B physical manipulation

Explanation:

Physical manipulation means fertilizers that are manufactured, blended, or mixed, or animal manures or compost that have been changed from their initial physical state by manipulations such as drying, cooking, chopping, grinding, shredding, ashing, or pelleting.

Please allow me to know if my answer helped you with a thank you!

Miss Hawaii

What is the main tenet of mechanical philosophy

Answers

Answer:362

Explanation:

i just want the points

Answer:

Some ancient philosophies held that the universe is reducible to completely mechanical principles—that is, the motion and collision of matter. This view was closely linked with materialism and reductionism, especially that of the atomists and to a large extent, stoic physics.

Explanation:

Hope this helps.

A 23 g bullet traveling at 230 m/s penetrates a 2.0 kg block of wood and emerges cleanly at 170 m/s. If the block is stationary on a surface with a coefficient of kinetic friction of 0.15 when hit, how far does it move after the bullet emerges?

Answers

The distance traveled by the wood after the bullet emerges is 0.16 m.

The given parameters;

mass of the bullet, m = 23 g = 0.023 gspeed of the bullet, u = 230 m/smass of the wood, m = 2 kgfinal speed of the bullet, v = 170 m/scoefficient of friction, μ = 0.15

The final velocity of the wood after the bullet hits is calculated as follows;

[tex]m_1u_1 + m_2 u_2 = m_1v_1 + m_2v_2\\\\0.023(230) + 2(0) = 0.023(170) + 2v_2\\\\5.29 = 3.91 + 2v_2\\\\2v_2 = 1.38\\\\v_2 = \frac{1.38}{2} = 0.69 \ m/s[/tex]

The acceleration of the wood is calculated as follows;

[tex]\mu = \frac{a}{g} \\\\a = \mu g\\\\a = 0.15 \times 9.8\\\\a = 1.47 \ m/s^2[/tex]

The distance traveled by the wood after the bullet emerges is calculated as follows;

[tex]v^2 = v_0^2 + 2as\\\\v^2 = 0 + 2as\\\\v^2 = 2as\\\\s = \frac{v^2}{2a} \\\\s = \frac{(0.69)^2}{2(1.47)} \\\\s = 0.16 \ m[/tex]

Thus, the distance traveled by the wood after the bullet emerges is 0.16 m.

Learn more here:https://brainly.com/question/15244782

Other Questions
Write a 200 word summary of the movie super size me PLEASE HELP WILL MARK YOU BRAINLIEST! NO FAKE ANSWERS.Is 5x + 3x - 3 a monomial, binomial or trinomial? why Democracy is not only a system of government but also a way of life i need help. ill mark brain to the first to answer. How many songs can Chet download for $1.00 using Get Tunes? If she downloaded 27 for $13.50 What is the BEST word to describe the probability that the spinner will stop on 3 or 4? A) certain B) unlikely C) impossible D) very likelyThe answer is C, Unlikely, I did the test and got 100, don't listen to the impossible ones :) Robert was thrilled to be free of the hungry fish and the endless slide. This time he dreamed of a meadow. The funny thing was that the grass grew so tall that it seemed to reach the sky, or at least over his head. And what did he see but a gigantic beetle glaring at him, a caterpillar perched on a blade of grass, and an elderly man the size of a grasshopper bobbing up and down on a spinach leaf and staring at him with bright and shining eyes.Who are you? Robert asked.The man responded in a surprisingly loud voice.I am the number devil!Robert was in no mood to put up with nonsense from a pip-squeak like that.First of all, there's no such thing as a number devil.Is that so? How can you be speaking to me if I don't exist?Which aspects of the passages affect how you would read them aloud? Check all that apply.The passages have different kinds of punctuation marks to end sentences.The passages are from two different genres.The passages have different points of view.One passage has narration; the other has dialogue. What usually happens during the prewriting stage of the writing process?1. You discuss the requirements of the assignment with friends.2. You find a book to read on a related topic.3. You write your best ideas as sentences and paragraphs.4. You write down lots of ideas so you can select the best ones. using the chart at the beginning of the animation and your knowledge of cells, what stage of the cell cycle do most cells spend the majority of their lives? Tiffany is filling her daughter's pool with water from a hose. She can fill the pool at a rate of 1/10 gallons per second.Create at least three equivalent ratios that are associated with the rate. Use a double number line to show your work. 9 + x =19 what does x equal? Potassium and bromine combine to make KBr. What is the name of this compound? potassium brominepotassium bromidebromine potassiumbromine potassiumide Ronnie, Mack, Kim, and Ada together stacked a total of 40 pizzas in a pan. Ronnie stacked 0.25 of the pizzas, Mack stacked 9 of the 40 pizzas, Kim stacked 35% of the pizzas, and Ada stacked the remaining pizzas. Who stacked the most pizzas? Ronnie Mack Kim Ada Read The sentences in the reference image below. Using an appositive, combine the sentences into one sentence. Dont forget to use commas before and after the appositive What are the effects of unanticipated deflation? Multiple select question. The real incomes of people with fixed nominal incomes will increase. The purchasing power of savings will increase. The real value of fixed-monetary assets will decline. Creditors will benefit at the expense of debtors. What should you do to get both numeric terms on the right side of the equation? Do you think you could go one month without using the internet? Why or Why not? What would be the hardest part? Identify the TWO chemical processes that results in the formation of Karst Landscape. please help me thanks Evaluate.plz help12(14+13)2+23Enter your answer as a mixed number in simplest form by filling in the boxes.