Sodium chloride reacts with copper sulfate to produce sodium sulfate and copper chloride.
2NaCl(aq) + CuSO4(aq) → Na2SO4(aq) + CuCl2(s)
+
This equation represents a
O synthesis reaction.
O decomposition reaction.
O single replacement reaction.
O double replacement reaction.
O

Answer:

3.8g of H2O are produced

Explanation:

The balanced reaction of the problem is:

CH4 + 2O2 → CO2 + 2H2O

Where 1 mole of CH4 reacts with 2 moles of O2

To solve this question we need to find, as first, the moles of each reactant in order to find limiting reactant. With limiting reactant we can find the moles of H2O produced and its mass as follows:

Moles CH4 - 16.04g/mol-

2.73g * (1mol/16.04g) = 0.170 moles CH4

Moles O2 -32g/mol-

6.7g (1mol/32g) = 0.209 moles O2

For a complete reaction of 0.170 moles of CH4 are needed:

0.170 moles CH4 * (2 mol O2 / 1mol CH4) = 0.340 moles O2

As there are just 0.209 moles of O2, oxygen is limiting reactant

The moles of water produced are:

0.209 moles O2 * (2mol H2O / 2mol O2) = 0.209 moles H2O

Mass water -Molar mass: 18.01g/mol-

0.209 moles H2O * (18.01g/mol) = 3.8g of H2O are produced

Explanation:

here's the answer to your question

Answer:

B

Explanation:

b/c copper is readuction agent

The most likely redox reaction that would occur if silver and copper metal were added to a solution that contained silver and copper ions is   [tex]\rm Cu^{2+} + 2Ag \rightarrow Cu + 2Ag^+[/tex]. The correct answer is option C.

Redox reaction is a reaction in which reduction and oxidation takes place simultaneously.

In this reaction:

[tex]\rm Cu^{2+} + 2Ag \rightarrow Cu + 2Ag^+[/tex]

Copper metal has a higher reduction potential than silver metal, which means that it will be oxidized to [tex]\rm Cu^{2+}[/tex] ions before silver metal is oxidized to  [tex]\rm Ag^+[/tex] ions.

The [tex]\rm Cu^{2+}[/tex] ions in the solution will then react with the silver metal to form [tex]\rm Ag^+[/tex] ions and Copper metal. This reaction is an example of a displacement reaction, where a more reactive metal removes a less reactive metal from its compound.

Therefore, option C. [tex]\rm Cu^{2+} + 2Ag \rightarrow Cu + 2Ag^+[/tex] is the correct answer.

Learn more about Redox reaction here:

https://brainly.com/question/28300253

#SPJ5

Answer:

AgNO3 + NaOH = AgOH + NaNO3.

Explanation:

Balancing Strategies: In this reaction, the products are initially NaNO3 + AgOH. However the AgOH would break down into Ag2O and H2O. This would give us NaNO3 + Ag2O + H2O as our products for the overall reaction.

Balancing Strategies: In this reaction, the products are initially NaNO3 + AgOH. However the AgOH would break down into Ag2O and H2O. This would give us NaNO3 + Ag2O + H2O as our products for the overall reaction.However, the equation balanced here is the initial reaction which produces AgOH and NaNO3.

Answer:

nitrit,nitrat

The pressure of hydrogen gas is 607.7 mmHg

According of Dalton's law of Partial pressure, the total pressure of a mixture of gases is the sum of the partial pressures of the individual gases in the mixture.

We can now write;

The for hydrogen collected over water, we have a mixture of hydrogen gas and water vapour.

Total pressure = pressure of hydrogen gas + vapour pressure of water

Pressure of hydrogen gas = Total pressure - vapour pressure of water

Pressure of hydrogen gas =  636 mmHg - 28.3 mmHg

Pressure of hydrogen gas = 607.7 mmHg

For more information see https://brainly.com/question/14119417

Answer:

Solution temperature.

Explanation:

Hello there!

In this case, considering this question about chemical kinetics, it will be possible for us to analyze two perspectives:

1. Molecular: here, we infer that the solution temperature will provide more energy to the molecules in order to undergo more effective crashes which will make more products and therefore, increase the rate constant.

2. Mathematical: by means of the Arrhenius equation, it will be possible to tell that the increase in the temperature of the system, the negative of the exponent present in such equation will increase and therefore turn the rate constant bigger.

In such way, we infer the answer is solution temperature.

Regards!

The question is incomplete, the complete question is;

When determining the amount of an oxidant present by titration, you can use iodine and starch as an indicator.

First, the oxidant, like hypochlorite, oxidizes

Choose...

neutral iodine into iodide ion

iodide ion into neutral iodine

iodate polyatomic ion into iodide ion

When starch and iodine are both present, the solution is

Choose...

blue-black

brownish yellow

clear

During the titration, the titrant, like thiosulfate, reduces the

Choose...

iodide ion into iodate polyatomic ion

neutral iodine into iodide ion

iodide ion into neutral iodine

When the iodine has completely reacted at the endpoint of the titration, the solution should become

Choose...

clear

blue-black

brownish yellow

Answer:

1. iodide ion into neutral iodine

2. blue-black

3. neutral iodine into iodide ion

4. clear

Explanation:

Hypochlorite oxidizes the iodide ion to iodine molecule according to the reaction equation;

ClO-(aq) + 2H+(aq) + 2I-(aq) ---------> 6 I2(l) + Cl- (aq)+ H2O(l)

When iodine is added, the colour of the starch solution immediately changes to blue-black.

A reduction reaction occurs when the titrant, thiosulfate is added as follows;

I2 + 2S2O32- → 2I- + S4O62-

The solution at end point is found to become clear again.

Answer:

4.27 g

Explanation:

Number of moles = concentration × volume

Concentration = 0.121 M

Volume = 250 mL

Number of moles = 0.121 M × 250/1000 L

Number of moles = 0.03 moles

Number of moles = mass/molar mass

Mass= Number of moles × molar mass

Mass= 0.03 moles × 142.394 g/mol

Mass = 4.27 g

Answer:

26.0L is the volume of the sample after the reaction

Explanation:

Based on the reaction, 1 mole of CH4 reacts with 1 mole of H2O to produce 1 mole of CO and 3 moles of H2.

That is, 1 mole of each reactant produce 4 moles of gases

As in the reaction, 0.1500 moles of CH4 and 0.1500 moles of H2O are added, 0.1500 moles of CO and 0.4500 moles of H2 are produced.

Before the reaction, the moles of gas are 0.3000 moles and after the reaction the moles are 0.6000 moles of gas.

Based on Avogadro's law, the moles of a gas are directly proportional to the volume under temperatura and pressure constant. The equation is:

V1/n1 = V2/n2

Where V is volume and n are moles of 1, initial state and 2, final state.

Replacing:

V1 = 13.0L

n1 = 0.3000 moles

V2 = ?

n2 = 0.6000 moles

13.0L*0.6000 moles / 0.3000 moles = V2

V2 = 26.0L is the volume of the sample after the reaction

Answer:

A. 1.9 × 103 g

(next one)

Which metric unit would be the best choice to report the result?  

A. kg

Answer:

1. 2

2. 1.9 × 10^3 g

3. kg

Explanation:

Answer:

[tex]F>C> H_e[/tex]

Explanation:

From the question we are given

a. He

b. C

c. F

Generally

The electron affinity  of an atom or molecule is defined as the amount of energy released when an electron is attached to a neutral atom or molecule in the gaseous state to form a negative ion.

Therefore

The order of electron Affinity is give as

[tex]F>C> H_e[/tex]

Elements arranged according to increasing electron affinity is He, C, F.

Electron affinity is a measure of the ability of an atom or molecule to attract and accept an electron. It quantifies the energy change that occurs when an electron is added to a neutral atom or ion in the gaseous state.

When an atom or ion gains an electron, it undergoes a process called electron attachment or electron capture. The electron affinity is the energy released or absorbed in this process. A higher electron affinity value indicates a stronger attraction for electrons.

The electron affinity is typically expressed in units of energy, such as electron volts (eV) or kilojoules per mole (kJ/mol). It can be either positive or negative. A positive electron affinity indicates that energy is released when an electron is added, while a negative electron affinity indicates that energy is required to add an electron.

Learn more about Electron affinity, here:

https://brainly.com/question/13646318

#SPJ6

Answer:

The concentration of KOH is  0.06137 M

Explanation:

Step 1: Data given

Molar mass of KHP = 204.22 g/mol

Mass of KHP = 0.4877 grams

Volume of water = 50 mL

Volume of KOH solution = 38.91 mL

Step 2: The balanced equation

C8H5KO4 + KOH ⇒ C8H4K2O4+ H2O

Step 3: Calculate number of moles of KHP

Moles = Mass / molar mass

Moles KHP = 0.4877 grams / 204.22 g/mol

Moles KHP = 0.002388 moles

Step 4: Calculate moles of KOH

For 1 mol KHP we need 1 mol KOH to produce 1 mol C8H4K2O4 and 1 mol H2O

For 0.002388 moles KHP we need 0.002388 moles KOH

Step 5: Calculate the concentration of KOH

Concentration = moles / volume

Concentration of KOH = 0.002388 moles / 0.03891 L

Concentration of KOH = 0.06137 M

The concentration of KOH is  0.06137 M

Answer:

[Kr] 5s²

Explanation:

From the question given above, the following data were obtained:

Atomic number of strontium (Sr) = 38

Electronic configuration =?

Next, we shall determine the electronic configuration of the noble gas element before strontium (Sr).

The noble gas element before strontium (Sr) is krypton (Kr). Thus, the electronic configuration of krypton (Kr) is given below:

Kr (36) => 1s² 2s²2p⁶ 3s²3p⁶ 3d¹⁰ 4s²4p⁶

Finally, we shall determine the electronic configuration of strontium (Sr). This can be obtained as follow:

Kr (36) => 1s² 2s²2p⁶ 3s²3p⁶ 3d¹⁰ 4s²4p⁶

Sr (38) =>?

Sr (38) => 1s² 2s²2p⁶ 3s²3p⁶ 3d¹⁰ 4s²4p⁶ 5s²

But

Kr (36) => 1s² 2s²2p⁶ 3s²3p⁶ 3d¹⁰ 4s²4p⁶

Therefore,

Sr (38) => [Kr] 5s²

Calories, we know that fat burn is calories.

Answer:

No.Kerosene oil and water do not mix with each other and form two separate layers.

Answer:

No

Explanation:

They cannot be mixed together they will form upper and lower layer

how many electrons does tin have?

Answer : 2, 8, 18, 18, 4

Therefore, total electrons = 50

Answer:

0.1309 mol

Explanation:

From the given information:

The metal ion, two ions of [tex]M^{+}[/tex] reacted with Cl⁻ to form [tex]MCl_n[/tex] i.e. the compound formed is [tex]MCl_2[/tex].

The concentration of the metal ion formed [tex][M^+][/tex] = 8.279 M

The concentration of the chlorine ion formed [tex][Cl^-][/tex] = 2 × 8.279 M

= 16.558 M

∴

We know that:

[tex]\mathsf{Molarity = \dfrac{no \ of \ moles }{volume (mL)}}[/tex]

The number of moles of [tex][Cl^-][/tex] = [tex]16.558 \ mol.L^{-1} \times 7.903 \ mL \times \dfrac{1 \ L}{1000 \ mL}[/tex]

= 0.1309 mol

Answer:

0.218mol

Explanation:

Using Avogadro's law equation;

Va/na = Vb/nb

Where;

Va = volume of gas A

Vb = volume of gas B

na = number of moles of gas A

nb = number of moles of gas B

According to the information in this question,

na = 0.4mol

nb = x mol

Va = 220ml

Vb = 120ml

Using Va/na = Vb/nb

220/0.4 = 120/x

Cross multiply

0.4 × 120 = 220 × x

48 = 220x

x = 48/220

x = 0.218mol

Answer:

46.2%

Explanation:

Number of moles benzoic acid reacts = 3.3g/122.12 g/mol = 0.027 moles

Since the reaction is 1:1, 0.027 moles of methyl benzoate is formed.

Hence;

Theoretical yield of methyl benzoate = 0.027 moles × 136.15 g/mol = 3.68 g

% yield = actual yield/theoretical yield × 100

% yield = 1.7 g/3.68 g × 100

% yield = 46.2%

Answer:

See explanation

Explanation:

The particular reactants in the Fischer esterification reaction were not stated.

Generally, a Fischer esterification is a reaction that proceeds as follows;

RCOOH + R'OH ⇄RCOOR' + H2O

This reaction occurs in the presence of an acid catalyst.

We can shift the equilibrium of this reaction towards the products side in two ways;

I) use of a large excess of either of the reactants

ii) removal of one of the products as it is formed.

Any of these methods shifts the equilibrium of the Fischer esterification reaction towards the products side.

Answer:

A, B, C and D

Explanation:

It can result for all of the choices mentioned.

Not following safety and procedure for handling hazardous material results in illness, death, injury, and HIPAA violation. Thus, all options are correct.

The hazardous material safety policy and measures are the standards set by HIPAA for the safety and precautionary measures that have been followed for reducing personal risk.

The hazardous materials have been chemicals, gases, flammables, and explosives. The inappropriate handling and not following the standard procedure results in illness, injury, death, and HIPAA violation. Thus, all the options are correct.

For more information about the hazardous material, refer to the link:

https://brainly.com/question/3520802

Answer:

1. Water purification method by reverse osmosis – membrane filtration

2. Method of purifying pure water by filter

3. Demineralization by ion exchange method

3. Demineralization by ion exchange method

Explanation:

Answer:

3.89 ×10^-5

Explanation:

Since they are gaseous reactants, we obtain the equilibrium constant from the given partial pressures;

p(H2O) = 0.0900 bar

p(H2) = 0.00100 bar

p(O2) = 0.00350 bar

The equation of the reaction is;2H2O(g)⇄2H2(g)+O2(g)

Kp= p(H2) . p(O2)/p(H2O)

Kp= 0.00100 × 0.00350/0.0900

Kp= 3.89 ×10^-5

Answer:

a) 22 calories

b) 30 mg

Explanation:

Divide number of cal or mg of pot by 8 fl oz.

Answer:

Molar volume, or volume of one mole of gas , depends on pressure and temperature, and is 22.4 liters - at 0 °C (273.15 K) and 1 atm (101325 Pa), or STP (Standard Temperature and Pressure), for every gas which behaves similarly to an ideal gas. The ideal gas molar volume increases to 24.0 liters as the temperature increases to 20 °C (at 1 atm).

Answer:

b

Explanation:

Addition of a solute lowers the freezing point of a substance.

Let us recall that the addition of a solute to a solution lowers the freezing point of the pure solution. This is because, freezing point depression is a colligative property. It depends on the number of solute molecules present.

The following are possible errors in the experiment:

Learn more about colligative properties:https://brainly.com/question/8073802

Answer:

There must be a complete circuit to allow electrons to flow. Oxidation happens at the anode. Reduction happens at the cathode.

Explanation:

Select all that are true for both a voltaic cell and an electrolytic cell.

There must be a complete circuit to allow electrons to flow. YES. This is true for both cells.

The redox reaction is spontaneous. NO. This is only true for the voltaic cell.

Oxidation happens at the anode. YES. This is true for both cells.

Reduction happens at the cathode. YES. This is true for both cells.

The redox reaction is non-spontaneous. NO. This is only true for the electrolytic cell.

The statements that have been true for both voltaic and electrolytic cells are:

Option A: There must be a complete circuit to allow electrons to flow.

Option C: Oxidation happens at the anode.

Option D: Reduction happens at the cathode.

The electrolytic cells are the one that converts electrical energy into chemical energy. Voltaic cells convert chemical energy into electrical energy.

From the given options, the best-suited option for both electrolytic and voltaic cells are:

The statements that have been true for both voltaic and electrolytic cells are, Option A, C, and D.

For more information about the electrolytic and voltaic cell, refer to the link:

https://brainly.com/question/1370699

Answer:

I say the statement is true