The simplest compound of hydrocarbon is methane
The formula is CH_4It belongs to alkane group and has single bonds.The electron structure attached
A weight lifter does 586 J of work on a weight that he lifts in 3.5 seconds. What is the power with which he lifts the weight?
need help fast please
Answer:
Explanation:
The quantity of energy transferred by a force when it is applied to a body and causes that body to move in the direction of the force work.
Find the force of a 240 kg vehicle accelerating at a rate of 4.5 m/s/s when it hits the wall.
Answer:
1080 Newtons
Explanation:
F = m * a
F = 240kg * 4.5 m/s
F = 1080
How does the ratio of tin to copper affect the properties of the alloy bronze?
Answer:
Stronger and harder than either of the pure metals
Explanation:
Select all the correct answers. which two statements are true about all generators? they convert motion energy to electric energy. they have a fixed pair of magnets and a rotating metal coil. they’re powered by fossil fuels. they convert electric energy to motion energy. they use the relative motion of a magnet and a coil of wire.
The two correct statements about generators are, they convert motion energy to electric energy and they use the relative motion of a magnet and a coil of wire.
What are generators?Generators are devices which convert mechanical energy into electrical energy.
Generators work by the laws of electromagnetism.
There are two types of generators, A.C. and D.C. generators.
Therefore, the two correct statements about generators are, they convert motion energy to electric energy and they use the relative motion of a magnet and a coil of wire.
Learn more about generators at: https://brainly.com/question/12950635
#SPJ4
A certain light truck can go around a flat curve having a radius of 150 m with a maximum speed of 32.5 m/s. With what maximum speed can it go around a curve having a radius of 66.0 m
Answer:
Approximately [tex]21.6\; {\rm m\cdot s^{-1}}[/tex], assuming that the coefficient of kinetic friction between the tires and the ground stays the same.
Explanation:
Let [tex]\mu_{k}[/tex] denote the coefficient of kinetic friction between the tires and the ground.
Let [tex]m[/tex] denote the mass of the truck. Let [tex]g[/tex] denote the gravitational field strength. The weight of this truck would be [tex]m\, g[/tex]. Since the curve is flat, the magnitude of the normal force [tex]F_\text{normal}[/tex] between the truck and the ground would also be [tex]m\, g\![/tex].
Let [tex]v = 32.5\; {\rm m\cdot s^{-1}}[/tex] denote the speed at which the truck goes around the curve with a radius of [tex]150\; {\rm m}[/tex]. The (horizontal) centripetal acceleration of the truck would be:
[tex]\displaystyle a = \frac{v^{2}}{r}[/tex].
The horizontal net force on the truck (of mass [tex]m[/tex]) would need to be exactly:
[tex]\displaystyle F_\text{net} = m\, a = \frac{m\, v^{2}}{r}[/tex].
The friction between the tires of the truck and the ground is the only horizontal force on the truck. Thus, this friction would need to supply the entirety of this horizontal net force:
[tex]\displaystyle F_\text{friction} = F_\text{net} = \frac{m\, v^{2}}{r}[/tex].
Notice that increasing [tex]v[/tex] would require an increase in the kinetic friction between the truck, [tex]F_\text{friction}[/tex]. However, since [tex]F_\text{friction}\![/tex] is at most [tex]\mu_{k}\, F_\text{normal}[/tex] (which is equal to [tex]\mu_{k}\, m\, g[/tex]):
[tex]\begin{aligned}\frac{m\, v^{2}}{r} &= F_\text{friction} \\ & \le \mu_{k}\, F_\text{normal} \\ &= \mu_{k}\, m\, g\end{aligned}[/tex].
Therefore, when the radius of the curve is [tex]r^{\prime}[/tex], the maximum velocity of this truck would be:
[tex]\begin{aligned}v^{\prime} &= \sqrt{\mu_{k}\, g\, r^{\prime}}\end{aligned}[/tex].
Likewise, it is possible to express [tex]\mu_{k}[/tex] in terms of [tex]r[/tex], [tex]g[/tex], and max speed [tex]v[/tex]:
[tex]\displaystyle \mu_{k} = \frac{v^{2}}{r\, g}[/tex].
Substitute this expression for [tex]\mu_{k}[/tex] back into the expression for [tex]v^{\prime}[/tex]:
[tex]\begin{aligned}v^{\prime} &= \sqrt{\mu_{k}\, g\, r^{\prime}} \\ &= \sqrt{\frac{v^{2}}{r\, g}\, g\, r^{\prime}} \\ &= \sqrt{v^{2}\, \frac{r^{\prime}}{r}}\end{aligned}[/tex].
Given that [tex]v = 32.5\; {\rm m\cdot s^{-1}}[/tex], [tex]r = 150\; {\rm m}[/tex], and [tex]r^{\prime} = 66.0\; {\rm m}[/tex]:
[tex]\begin{aligned}v^{\prime} &= \sqrt{v^{2}\, \frac{r^{\prime}}{r}} \\ &= \sqrt{(32.5\; {\rm m\cdot s^{-1}})^{2} \times \frac{66.0\; {\rm m}}{150\; {\rm m}}} \\ &\approx 21.6\; {\rm m\cdot s^{-1}}\end{aligned}[/tex].
3. Classify the different types of spectra by how they are created. Physical science
Answer:
Most light sources can be classified into three main types: continuous, absorption, and emission. A hot, opaque object, like the filament in an incandescent light bulb, emits a continuous spectrum, having light of all wavelengths. A hot, dense gas is another example of an object that emits a continuous spectrum.
Explanation:
The SI unit for pressure is pascal (Pa). One hectopascal would equal how many pascals? 0. 1 Pa 10 Pa 100 Pa 1000 Pa.
Answer:
100 Pa
Explanation:
"Hecto" prefix is given when a physical quantity generally 100 times the amount of the unit.
1 Pa x 100100 PaWhat is the acceleration along the ground of a 10 kg wagon when it is pulled with a force of 44 n at an angle of 35° above the horizontal? 0.23 m/s2 0.28 m/s2 2.52 m/s2 3.60 m/s2
Based on the calculations, the acceleration of this wagon along the ground is equal to: D. 3.60 m/s².
Given the following data:
Mass = 10 kg.
Angle = 35°
Force = 44 Newton.
How to calculate the acceleration along the ground?In accordance with Newton's Second Law of Motion, the net force acting on this wagon is equal to the horizontal component of the force that is parallel to the slope:
F = macosθ
Substituting the given parameters into the formula, we have;
44 = 10 × a × cos35
44 = 10a × 0.8192
44 = 8.192a
a = 44/8.192
a = 3.60 m/s²
Read more on acceleration here: https://brainly.com/question/25961211
#SPJ4
Which of the following summarizes cellular respiration?
Oxygen reacts with glucose to produce carbon dioxide and water, and release energy.
Light energy is changed into chemical energy.
Light energy is used to join water and carbon dioxide to make oxygen and glucose.
Chemical energy is changed into light energy.
The statement which summarizes cellular respiration is Oxygen reacts with glucose to produce carbon dioxide and water, and release energy.
What is cellular respiration?Cellular respiration is the process by which food, in the form of glucose is transformed into energy within cells.
The food is prepared by the plants by the process of photosynthesis in presence of sunlight. This food is in the form of glucose.
The respiration of plants is done by breaking of glucose by absorbing oxygen. This produces carbon- di- oxide and water along with the release of energy.
Thus, the cellular respiration is oxygen reacts with glucose to produce carbon dioxide and water, and release energy.
Learn more about cellular respiration.
https://brainly.com/question/13721588
#SPJ1
what do you mean by impulse ratio?
derive a relation between critical angle and refractive index of a substance
Answer:
Explanation:
Refractive index of denser medium w.r.t rarer medium
[tex]r[/tex]ч[tex]d[/tex][tex]=\frac{1}{sini_{c} }[/tex]
where, [tex]i_{c}[/tex] = critical angle
What is physics and how does it affect every day life
Explanation:
Physics, or the study of matter, energy, and the interactions between them, helps us to understand the laws and rules that govern the physical world.
how much work is done on a small car if a 3000 N force is exerted to move it 75 m to the side of the road ?
Answer:
Soln,
force=3000 N
distance=75 m
we know that,
work done= force × distance
= 3000× 75
= 225000 joule
A car is accelerated from rest to a speed of 20km/hr to 40 km/hr. Compared to the energy required to go from rest to 20km/hr, the energy required to go from 20km/hr to 40 km/hr is...
Answer:
678908765456789
Explanation:
Marjorie drops an object from a height of h meters, and it hits the ground with a velocity of v m/s, as given by the function v equals the square root of 19.6 h. If the velocity of the object is 68.6 m/s, what was the height of the object before it was dropped? Round your answer to the nearest tenth.
Answer:
240.1 m
Explanation:
Potential energy ( mgh) is fully converted to Kintetic energy ( 1/2 mv^2)
equate them
mgh = 1/2 mv^2 divide by 'm'
gh = 1/2 v^2
9.8 h = 1/2 v^2
19.6 h = v^2 v = sqrt ( 19.6h) (as given)
68.6 = sqrt (19.6 h) solve for h = 240.1 m
Why is it important to assess flexibility both before and during a workout regimen? a. to assess flexibility progress b. to keep muscles warm c. to establish flexibility baselines d. none of the above please select the best answer from the choices provided. a b c d
It important to assess flexibility both before and during a workout regimen because to assess flexibility progress.
What is a flexibility exercise?Flexibility exercises, as the name implies, help to increase the stretch of the muscles, improving the range of motion. More flexibility is also important to help prevent possible post-workout soreness.
In this case we have that the reason to continue doing stretching before and during the exercises is about to assess flexibility progress.
See more about flexibility at brainly.com/question/15395713
#SPJ4
Answer:
A
Explanation:
The speed of sound in water is 1,492 m/s. A sonar signal is sent straight down from a ship at a point just below the water's surface and 7.5 s later the reflected signal is detected. How deep is the ocean beneath the ship?
Answer:
5595 m
Explanation:
The wave travels down (the depth) and the back up (the depth again)
this distance is 2 d
2 d = 1492 m/s * 7.5 s
2d = 11190 m
d = 5595 m
The brakes on a 17,600 N car exert a stopping force of 650. N. The car’s velocity changes from 25.0 m/s to 0 m/s.
a) What is the car’s mass?
b) What was its initial momentum?
c) What was the change in momentum for the car? d) How long does it take the braking force to bring the car to rest?
(a) The mass of the car is 1,795.92 kg
(b) The initial momentum of the car is 44,897.96 kgm/s.
(c) the change in momentum for the car is 44,897.96 kgm/s..
(d) The time it takes the braking force to bring the car to rest is 69.4 s.
Mass of the carThe mass of the car is calculated as follows;
W = mg
m = W/g
m = (17,600)/9.8
m = 1,795.92 kg
Initial momentum of the carPi = mvi
Pi = 1,795.92 x 25
Pi = 44,897.96 kgm/s
Change in momentum of the carΔP = Pf - Pi
ΔP = 0(1,795.92) - 44,897.96 kgm/s
ΔP = - 44,897.96 kgm/s
Time taken for the car to come to restF = ma
-650 = 1,795.92(a)
a = -650/1,795.92
a = -0.36 m/s²
v = u + at
0 = 25 - 0.36t
0.36t = 25
t = 69.4 s
Learn more about momentum here: https://brainly.com/question/7538238
#SPJ1
Show that the square of the period of revolution of a satellite is directly proportional to the cube of the orbital radius
Answer:
Explanation:
HELP PLEASE
Which is true about the price of sustainable buildings?
It is generally less expensive over the lifetime of the building, due to lower energy costs in production of the materials and lower energy bills,
It is almost always less expensive upfront because insulation is so inexpensive.
It is almost always more expensive, but businesses choose to construct them anyway because climate change is a priority for them.
It is generally more expensive over the lifetime of the building, which is an issue that should be weighed in a cost-benefit analysis.
Sustainable buildings are generally less expensive over the lifetime of the building, due to lower energy costs in production of the materials and lower energy bills. Option A is correct.
What is sustainable buildings?Sustainable buildings refer to both a structure and the implementation of environmentally responsible and resource-efficient methods.
Sustainable buildings are generally less expensive over the lifetime of the building, due to lower energy costs in production of the materials and lower energy bills,
Hence,option A is correct.
To learn more about the sustainable buildings, refer;
https://brainly.com/question/8434592
#SPJ1
Calculate the molar mass of sucrose:
Answer:
342 g/mole
Explanation:
Mass of the carbon = 12 g
Mass of the hydrogen = 1 g
Mass of the oxygen = 16 g
Given: Chemical Formula of the Sucrose = C12H22O11
Molar mass = 12 x 12 + 1 x 22 + 16 x 11
= 144 + 22 + 176
= 320 + 22
= 342 g/mole ➪ molar mass of the sucrose
342 g.
Explanation:
C12H22O11 ------> SugarCarbon has mass -> 12
Hydrogen has mass -> 1
Oxygen has mass -> 16
=> (12× 12 ) + (1 ×22 ) + ( 16 × 11 )
=> 144 + 22 + 176
=> 342 gram
__________________Molecular mass : The Molecular mass of a substance is the sum of the atomic masses of all atoms in a molecule of a substance, e.g ., Molecular mass of water is 18u.H2O = 2 × H + 1 × O=> 2 × 1 + 1 ×16 = 2+16= 18 u. Mass of one mole of a substance is called its molar mass. ___________________what is a Molecule?
A Molecule is the smallest Particle of an element or a compound capable of independent existence under ordinary conditions. It shows all the properties of tge substance.Please answer these! Will mark brainiest if correct!
Answer:
11 is d. 12 is c. 13 is b. 14 is b. 15 is b.
Explanation:
The products of nuclear fission have slightly less mass than the original atom that undergoes fission. During the process, a very large amount of energy is produced. What do you think happens to the "missing" mass in a fission reaction?
Answer:
missing mass has been converted to energy according to Einstein mass energy equation
1.
List the kinds of objects that exist outside our solar system, but are still in our galaxy.
2.
List the kinds of objects that exist in deep space beyond our galaxy.
Answer:
1. Stars, Nebula, Exo Planets, Star Clusters
2. Galaxies, Magelnic Clouds, Voids
Explanation:
Studying Astronomy for Years hope this helps and if you need more than this basic run down let me know have a great night!
how can we change the frequency of the wave
Answer:
.Also we can change the frequency by decreasing wavelength , or increasing velocity
Explanation:
12. What are the components of the vector with a magnitude of 65.0 and a direction of 101.7°?
O (13.2, -63.6)
O (63.6, -13.2)
O (-63.6, 13.2)
O (-13.2, 63.6)
Answer:
V = 65 at 101.7 deg
Vx = V cos θ = 65 cos 101.7 = -13.2
Vy = V sin θ = 65 sin 101.7 = 63.6
The last option is correct
On the Earth, these convection cells form because of the __________ heating of the Earth and changes in pressure.
Group of answer choices:
even
equal
unequal
consistent
On the Earth, these convection cells form because of the unequal heating of the Earth and changes in pressure. Option C is correct.
What is a convection cell?A convection cell is a phenomenon that happens when there are density changes inside a liquid or gaseous medium.
The essential characteristics of a convection cell are rising and/or falling currents, which are caused by density variations.
These convection cells arise on Earth as a result of the Earth's uneven heating and pressure variations.
On the Earth, these convection cells form because of the unequal heating of the Earth and changes in pressure.
Hence,option C is correct.
To learn more convection cell refer:
https://brainly.com/question/17149610
#SPJ1
A wave is sent down a tunnel where it travels and bounces of the far wall, returning to the sender. The wave travels at 4m/s and it takes 120 seconds to travel there and back. How deep is the cave?
Answer:
100ft
Explanation:
Two electrons (-1.6 x 10-19 C) are separated by an insulator at a distance of 0.10 mm. Which of the following is the electrostatic force between these electrons?
The electrostatic force between these electrons will be 2.3×10⁻²⁰ N.
What is Columb's law?The force of attraction between two charges, according to Coulomb's law, is directly proportional to the product of the charges and inversely proportional to the square of the distance between them.
Charges that are similar repel each other, whereas charges that are diametrically opposed attract each other.
They will repel, moving in opposite directions at the same speed. Because the magnitude and nature of the charge are same.
The electrostatic force between these electrons is;
[tex]\rm F= \frac{Kq_1q_2}{r^2} \\\\ F=\frac{9 \times 10^9 \times -1.6 \times 10^{-19} \times- 1.6 \times 10^{-19} }{(0.10 \times 10^-3)^2} \\\\F= 2.3 \times 10^{-20} \ N[/tex]
Hence, the electrostatic force between these electrons will be. 2.3×10⁻²⁰ N.
To learn more about Columb's law refer to the link;
brainly.com/question/1616890
#SPJ1
In classical physics, relative motion is absolute. For example, consider an object moving in a straight line with speed v0 on a platform. If the platform is moving with speed vp in the same direction relative to the ground, the object will be moving with speed v0 + vp relative to the ground. However, it is known that the speed of light is the same for all observers regardless of reference frame, which contradicts the classical model of relative motion. Which of the following statements is a conclusion that could be drawn from this contradiction?А. There are no absoluta celerence frames.B. All physical quantities are the same in al reference frames.C. Light can be described by a wave model and a particle model.D. Observers in different reference frames will measure time and distance differently.
Answer:
d) observers in different reference frames will measure time and distance differently