Answer:
Vanlency of hydrogen - 11
Electrons of hydrogen - 1
Answer:
The answer is: 1
Hope this helps :) <3
Explanation:
PLEASE I WILL GIVE BRAINLISET PLS HELPPPP
Answer:
the answer is A because the rest wouldnt go good with the work
Explanation:
In a Lewis Diagram for fluorine, are the two electrons given to the other fluorine atom, taken by the other fluorine atom, or shared between the fluorine atoms?
what takes place when the pollen of the one plants move and fertilize the ovum of another plant
2. A compound with an empirical formula of C2H3Br2 has a molar mass of 373.69 g/mol. What is
the molecular formula?
(The molar mass of C2H3Br2 = 186.85 g/mol)
E) C4H6Br4
А) C2H3Br2
B) CHBr
C) C6H9Br6 D) C4H6Br2
(0.5 Points)
A
Empirical is the simplest whole number ratio of elements in a compound. Molecular formula is n times the empirical formula, where n is integers 1,2,... The molecular formula is C[tex]_4[/tex]H[tex]_6[/tex]Br[tex]_4[/tex]. The correct option is option E.
What is empirical formula?Empirical formula gives the proportion of the element that is present in a compound. It does not give information about the actual number or the arrangements of the atoms.
n=empirical formula mass÷ molecular formula mass
n=1,2,3....
empirical formula mass = 373.69 g/mol
molecular formula mass= 186.85 g/mol
substituting all the given values in the above formula, we get
n= 186.85 g/mol÷ 373.69 g/mol
= 2
Multiply C[tex]_2[/tex]H[tex]_3[/tex]Br[tex]_2[/tex] by 2, which comes out to be C[tex]_4[/tex]H[tex]_6[/tex]Br[tex]_4[/tex].
Therefore, the molecular formula is C[tex]_4[/tex]H[tex]_6[/tex]Br[tex]_4[/tex]. The correct option is option E.
To know more about empirical formula, here:
https://brainly.com/question/14044066
#SPJ2
A team of scientists is conducting tests to measure the boiling point of a liquid using a thermometer in the liquid. The team is
then recording the temperature where the liquid changes from a liquid to a gas rapidly. After 100 trials, the results are 5 degrees
below the expected results. Which next step is most reasonable? (1 point)
O checking the calibration of the thermometer to ensure that it is giving accurate readings
O assuming that the new results are incorrect
O assuming that the previous measurements are incorrect
O checking the insulation of the apparatus to find out if heat is escaping
The most reasonable step to take will be to check the calibration of the
thermometer to ensure that it is giving accurate readings.
Experiments which are done to be give the same results under standard
conditions. Common causes of incorrect results during the analysis of
boiling point of substances include heating the substance too rapidly or
the thermometer not being properly calibrated.
The thermometer is used to measure the temperature and so must be
properly calibrated to give accurate readings.
Read more on https://brainly.com/question/24657998
As an electron in an atom moves from a higher energy state to a lower energy state, the atom
A
becomes a negative ion
В.
becomes a positive ion
С.
releases energy
D.
absorbs energy
Answer:B
Explanation:
What is the volume of HCl (r= 1.17 g / cm ^ 3, omega = 36 \%) required to precipitate silver in the form of AgCl from 2, 000 g of an alloy containing 22% by weight of Ag, if used 1.5 times the amount of precipitating reagent?
The volume of precipitating reagent, HCl required to precipitate silver in the form of AgCl from 2,000 g of an alloy containing 22% by weight of Ag is 0.530 L
In order to determine the volume of precipitating reagent, HCl required to precipitate silver in the form of AgCl from 2,000 g of an alloy containing 22% by weight of Ag, the following steps are followed:
Step 1.
The concentration of the HCl solution is calculated using the formula:
Molarity = percentage * specific gravity * 1000 cm³ / molar mass * 1 LPercentage purity of HCl = 36% = 0.36
specific gravity, r = 1.17 g/cm³
molar mass of HCl = 36.5 g/mol
Concentration of HCl = 0.36 * 1.17 * 1000 / 36.5 * 1
Concentration of HCl = 11.53 mol/L
Therefore, 1 L of HCl solution contains 11.53 moles of HCl
Step 2:
The equation of the dissociation of HCl solution is given below:
HCl (aq) ------> H⁺ (aq) + Cl⁻ (aq)1 mole of HCl produces 1 mole of Chloride ions, Cl⁻
Equation of reaction between Silver in the alloy and HCl is given as follows:
Ag (s) + H⁺Cl⁺ (aq) -----> AgCl (s)A white precipitate of AgCl is formed but hydrogen gas is not formed as Silver is a less reactive metal.
1 mole of HCl produces 1 mole of Cl⁻ which reacts with 1 mole of Ag to produce 1 mole of AgCl precipitate.
Step 3: Determine the mass and number of moles of silver in the alloy
Percentage of silver in the alloy = 22% = 0.22Mass of silver in 2000 g alloy = 0.22 * 2000 g
Mass of silver in 2000 g alloy = 440 g
Number of moles of silver in 440 g of silver is determined using the formula below:
number of moles = mass / molar massmolar mass of silver = 108 g/mol
number of moles of silver = 440 /108
number of moles of silver in the alloy = 4.074 moles
Step 4: Calculate the volume of HCl required
Since 1 mole of Cl⁻ ions react with 1 mole of Ag; 4.074 moles of Cl⁻ ions will be required to react with 4.074 moles of Ag.
1 L of HCl solution contains 11.53 moles of Cl⁻
Volume of HCl solution that contains 4.074 moles of Cl⁻ = 4.074 * 1L/11.53
Volume of HCl that contains 4.074 moles of Cl⁻ = 0.353 L
Since 1.5 times the amount of precipitating reagent HCl is required, volume of HCl required = 1.5 * 0.353 L
Volume of precipitating reagent HCl required = 0.530 L
Therefore, the volume of precipitating reagent, HCl required to precipitate silver in the form of AgCl from 2,000 g of an alloy containing 22% by weight of Ag is 0.530 L
Learn more about precipitation reactions at: https://brainly.com/question/24944690
How many decigrams of chromium are in 3.19 x 10^23 atoms of chromium? show work
mol = 3.19 × 10^23/6.02^23
= 0.529 mol
mass = 0.529 × 52
= 27.508 g
g to decigram
= 27.508 × 10
= 275.08 decigram
During the formation of an ionic compound
1) One atom losses electrons and the second gains electrons
2) Two atoms lose electrons
3) Two atoms gain electrons
1. Newton's First Law is also called the
Law of
Answer: law of inertia
Explanation:
Answer:
The Law of Inertia
Explanation:
Another name for Newton's first law is The Law of Intertia, which states that "if a body is at rest or moving at a constant speed in a straight line, it will remain at rest or keep moving in a straight line at constant speed unless it is acted upon by a force" (“Newton’s laws of motion | Definition, Examples, & History | Britannica, n.d.).
Why do thermistors increase in conductivity when heated? What happens in normal metals? Explain on the atomic level.
Metal conductivity generally goes down or resistivity goes up with temperature goes up.
A student is studying the boiling points of six different liquids and finds results with consistently higher boiling points than what research would suggest. Which option describes a likely cause?
Answer:
Large molecules tend to have greater boiling points because the London dispersion forces are stronger within.
Explanation:
What is the molecular geometry if you have a double bond, a single bond and 1 lone pair around the central atom?
Answer:
4 pairs are needed for the bonds, leaving 1 lone pair. Each double bond uses 2 bond pairs and can be thought of as a single unit. There are 2 double bond units and 1 lone pair, which will try to get as far apart as possible - taking up a trigonal planar arrangement.
Why are naphthalene ball used to protect clothes from insects? How does it gradually decrease and ultimately disappear?
how many grams are in 1.35 moles of NH3
How many liters of 0.200 M sodium hydroxide do you need to titrate 0.300 L of a 0.100 M diprotic acid to the equivalence point?
The volume of the sodium hydroxide solution needed for the reaction is 0.3 L
We'll begin by writing the balanced equation for the reaction.
H₂X + 2NaOH → 2H₂O + Na₂X
From the balanced equation above, the following data were obtained:
The mole ratio of the acid, H₂X (nA) = 1The mole ratio of base, NaOH (nB) = 2From the question given above, the following data were obtained:
Molarity of base, NaOH (Mb) = 0.2 M. Volume of acid, H₂X (Va) = 0.3 L. Molarity of acid, H₂X (Ma) = 0.1 M. Volume of base, NaOH (Vb) =?MaVa / MbVb = nA / nB
(0.1 × 0.3) / (0.2 × Vb) = 1/2
0.03 / (0.2 × Vb) = 1/2
Cross multiply
0.03 × 2 = 0.2 × Vb
0.06 = 0.2 × Vb
Divide both side by 0.2
Vb = 0.06 / 0.2
Vb = 0.3 LTherefore, the volume of NaOH needed for the reaction is 0.3 L
Learn more on titration: https://brainly.com/question/23298305
Which model represents a compound with a 1:2 ratio?
Please explain your answer.
Answer:
D
Explanation:
D is the correct answer due to the fact that they way they are connected has 2 purple atoms and 1 orange one. thus would create a 1:2 ratio with 1 orange atom and 2 purple atoms.
A would create a 2:3 ratio, B wouldn't create a ratio comparable to the others, and C creates a 1:1 ratio with a few purple atoms floating around them, making all of the answers except D invalid.
In the given figures, the name of the model representing a compound with a 1:2 is figure D.
What is molar ratio?Molar ration of any compound gives idea about the ratio of the concentration of given constituents present in that compound.
In the figure A molar ratio is 2:3, in figure B molar ratio of given constituents is not given because each molecule is composed of same types of atoms, in figure C molar ratio of given constitutes particles is 1:1 and in the figure D molar ratio of constituents is 1:2. Because in figure D, two atoms of one element and 1 atom of another element is present.
Hence, figure D is correct option.
To know more about molar ratio, visit the below link:
https://brainly.com/question/4408248
the sequence of stages an organisms go through from one generation to the next lace where an organism lives is called in
Answer:
A life cycle is the sequence of stages an organisms goes through from one generation to the next. Organisms that reproduce sexually can have different types of life cycles, such as haploid or diploid life cycles.
Which of the following is an example of a scientific model?
The total inches of rainfall during a thunderstorm
A telescope used to study the stars
A computer program that simulates atmospheric conditions
A song about the Grand Canyon
50 PTS!!!!! Please answer without links!
What type of chemical reaction happens with Aerobic Cellular Respiration?
Synthesis, decomposition, single displacement, double displacement, or combustion.
Gold has a specific heat of 0.126 J/g.C. Copper has a specific heat of 0.386 J/g C. Which of the two metals would require more
heat energy to raise the temperature of the same weight of metal by 10.5C?
Answer:
The copper, because its specific heat is higher, meaning it takes more heat (Joules) per gram to raise the temperature 1 degree Celsius.
Explanation:
Hi what is kinematic??
Answer:
Kinematics is a branch of physics concerned with the geometrically possible motion of a body or system of bodies without considering the forces which are involved
Hope it helpsssss.!!!!
Which of the following expresses the value 300,000,000 in correct scientific notation?
Group of answer choices
3 x 108
0.3 x 10-9
3 x 10-8
0.3 x 109
Answer:
3 x 10^8
Explanation:
how many sightings of fish in spongebob were there, person who gets it right will get brainliest on god on everything
NEED ASAP WILL GIVE BRAINLIST
Answer:
It have 31 electrons
It have 31 electrons
Determine the volume (L) of nitrogen monoxide gas that is created at STP when 32.2 g
of solid copper reacts with excess nitric acid.
3Cu(s) + 8HNO3(aq) — 3Cu(NO3)2 (aq) + 4H2O(1) + 2NO(g)
Taking into account the reaction stoichiometry and STP conditions, the volume of nitrogen monoxide gas that is created at STP when 32.2 g of solid copper reacts with excess nitric acid is 7.5677 L.
Reaction stoichiometryThe balanced reaction is:
3 Cu(s) + 8 HNO₃(aq) → 3 Cu(NO₃)₂ (aq) + 4 H₂O(l) + 2 NO(g)
By reaction stoichiometry, the following amounts of moles of each compound participate in the reaction:
Cu: 3 molesHNO₃: 8 molesCu(NO₃)₂: 3 molesH₂O: 4 moles NO: 2 molesThe molar mass of the compounds is:
Cu: 63.54 g/moleHNO₃: 63 g/moleCu(NO₃)₂: 187.54 g/moleH₂O: 18 g/moleNO: 30 g/moleBy reaction stoichiometry, the following mass quantities of each compound participate in the reaction:
Cu: 3 moles× 63.54 g/mole= 190.62 gramsHNO₃: 8 moles× 63 g/mole= 504 gramsCu(NO₃)₂: 3 moles ×187.54 g/mole= 562.62 gramsH₂O: 4 moles ×18 g/mole= 72 gramsNO: 2 moles ×30 g/mole= 60 gramsSTP conditionsThe STP conditions refer to the standard temperature and pressure, which values are 0 °C and 1 atmosphere and are reference values for gases. In these conditions 1 mole of any gas occupies an approximate volume of 22.4 liters.
Moles of NO formedThe following rule of three can be applied: if by reaction stoichiometry 190.62 grams of Cu form 2 moles of NO, 32.2 grams of Cu form how many moles of NO?
moles of NO= (32.2 grams of Cu× 2 moles of NO)÷ 190.62 grams of Cu
moles of NO= 0.3378 moles
Then, 0.3378 moles of NO are formed.
Volume of NO createdNow, you can apply the following rule of three: if by definition of STP conditions 1 mole of NO occupies a volume of 22.4 liters, 0.3378 moles occupies how much volume?
volume= (0.3378 moles× 22.4 L)÷ 1 mole
volume= 7.5677 L
Finally, the volume of NO created is 7.5677 L.
Learn more about the reaction stoichiometry:
brainly.com/question/24741074
#SPJ1
8. Which property is used to determine the degree of polarity between two bonded atoms? A) density B) electronegativity C) pressure D) temperature
Answer:
I think B) electronegativity is the correct answer.
Electronegativity is the property which is used to determine the degree of polarity between two bonded atoms. Therefore, the correct option is option B.
What is polarity?Polarity is the dispersion of electrical charge over the atoms linked by a chemical bond. Bonds between identical atoms, such as H2, are electrically homogeneous in the sense that both hydrogen atoms are electrically neutral, but bonds between different atoms are electrically inequivalent.
Electronegativity is the property which is used to determine the degree of polarity between two bonded atoms. The relative electronegativities of the elements determine the polarity of a bond. Electronegativity is the ability of an element's atom to attract electrons to itself when it is part of a compound.
Therefore, the correct option is option B.
To know more about polarity, here:
https://brainly.com/question/3248676
#SPJ2
supose 10 atoms of carbon (c) recat with 20 atoms of oxegen (o) to from 10 molecules of carbon dioxide (co2). According to the law of conservation of matter, how many atoms are presented in this reaction?
Answer:
30
Explanation:
CO2 means that there is 1 carbon and 2 oxygens in each CO2 molecule.
If there are 10 atoms of Carbon that requires 20 atoms of oxygen.
The number of atoms present is 10 + 20 = 30 atoms of any kind present. You just need to add.
What is the process of solar nuclear fusion?
Answer:
base sa research po
Explanation:
In the core of the Sun hydrogen is being converted into helium. This is called nuclear fusion. It takes four hydrogen atoms to fuse into each helium atom. During the process some of the mass is converted into energy.
Answer:
Hydrogen atoms are fused into deuterium, then helium-3, then helium-4, each step giving off large amounts of energy.
Explanation:
Because that's how it works :D
In lab a student is asked to mix solutions of copper (II) sulfate and potassium phosphate. The
student wants to produce exactly 3.75 grams of precipitate. Based on the desired outcome
determine the volume of 1.25M copper (Il) sulfate and 0.75 M potassium phosphate required.
I believe the volume would turn out to be 2.35M but i could be wrong
