(QUICK)
What is the percent yield if the actual yield is 1.5g and the theoretical yield is 4.5g?

Answer:

tiny crystals of the mineral quartz, which is made out of silica and oxygen

Well, much of the world's sand is made out of the same stuff, tiny crystals of the mineral quartz, which is made out of silica and oxygen, the two most common elements in Earth's crust.

Answer:

0.10 M NaHA

Explanation:

The substances created during chemical reactions, on the other hand, do not simply revert to their initial state. The most essential thing to remember is that the makeup of a material does not change when it undergoes a physical change, but it does change when it undergoes a chemical change.

Answer:

the most important thing for you to remember is that in a physical change composition of a substance does not change and in a chemical change the composition of a substance does change

Answer:

25%

Explanation:

Ammonium Chloride NH4CI Fertilizer-grade NH4Cl usually contains 25% N. About two-thirds of the world capacity for manufacture of this material is located in Japan, with the remaining one-third situated in India and China.

Answer:

A- Butyric acid and methylammonium chloride.

Explanation:

Answer:

B

Explanation:

We can see here that the functional group that the molecule have is: B. Carbonyl

A functional group is a specific group of atoms or bonds within a molecule that is responsible for the characteristic chemical reactions and properties of that molecule. Functional groups are the parts of organic molecules that determine their reactivity and the types of chemical reactions they can undergo.

In organic chemistry, functional groups play a crucial role in understanding the structure and behavior of molecules. Different functional groups confer distinct properties to molecules, influencing their physical properties, solubility, acidity or basicity, and interactions with other molecules.

Learn more about functional group on https://brainly.com/question/10058230

#SPJ2

Answer:

1. More data should be collected to get a more reliable average

2. A boiling point at 1.5 atmospheres could be predicted fairly well

3. The actual boiling point is probably between 34 C and 40 C

4. By taking 10 measurements of each of the five liquids and finding an average

5. The thermometer being used might need to be recalibrated

Explanation:

Took the quick check

Answer:

Yes Both A) KCL and D) HCL are correct...

Answer:

It's only A

Explanation:

Potassium (K) is a metal and Chlorine (Cl) is a nonmetal, and ionic compounds are formed between metals and nonmetals. So KCl forms ionic bonds.

Hydrogen (H) and Chlorine (Cl) are both nonmetals, and only covalent bonds form between nonmetals. (Only exception is when its an acid, then it's ionic)

Also, the question indicated which "pair" and not "pairs" meaning that there is only one answer, and I'm more likely to go with A rather than D.

The mole fraction of methanol in the mixture is 0.444

We'll begin by calculating the number of mole of water.

Mole = mass / molar mass

Mole of water = 45 / 18

Mole of water = 2.5 moles

Finally, we shall determine the mole fraction of methanol.

Mole fraction of methanol =?

Mole fraction = mole / total mole

Mole fraction of methanol = 2 / 4.5

Mole fraction of methanol = 0.444

Thus, the mole fraction of methanol is 0.444

Learn more about mole fraction:

https://brainly.com/question/15444997

Answer:

antarcita

Explanation:

Answer:

What is the continent bellow the world?

Answer:

Ball and stick model is 3D and has the atoms depicted as different Coloured balls Conected to each other by "sticks"

fischer projection has the atoms on the side coming out of the plane, the atoms at the ends going behind (going away from you)

bond line notation Is the most common it does not show the C or H bonds but instead carbons are represented by the bends

The three structures of glucose represent three different models, they are ball and stick model, Fischer projection and bond line notation, respectively.

Glucose is a type of simple sugar (carbohydrate) that does not further hydrolyze to give monosaccharides.

Therefore, the three glucose structures reflect three distinct models: the ball and stick model, the Fischer projection, and the bond line notation, respectively.

Learn more about Glucose here:

https://brainly.com/question/30548064

#SPJ5

Answer:

The correct answer is 6.265 M.

Explanation:

To find the molarity of the solution, we first must recall that molarity represents the number of moles of solute divided by the number of liters of solution. Thus, our first step should be to convert the solute amount in grams to moles, using the given molar mass.

266.07 g * (1 mol/169.88 g) = 1.5662 mol

Now, we can find the molarity using the following formula:

Molarity = moles solute/liters solution

M = 1.5662 mol/0.25 L

M = 6.265 M

Therefore, the molarity of the solution is 6.265 M.

Hope this helps!

Answer:

22 grams

Explanation:

Zn + 2HCl → ZnCl2 + H2

The first step to answering this question is to calculate the amount of moles of HCl needed. We do this by multiplying the coefficient of HCl in the equation over the coefficient of Zn.

0.30mol × [tex]\frac{2}{1}[/tex] = 0.60 mol HCl

Now, to figure out how many grams we must multiply the amount of moles of HCl by it's molar mass. This molar mass can be found by adding the molar masses of all the elements in HCl.

0.60mol × 36.46 g/mol = 21.87g

Using proper sig figs, 22 grams of HCl are required for this reaction.

Answer:

1. Rutherford performs the gold foil experiment while JJ Thompson performs cathode ray experiment. It was Rutherford's experiment that used positively charged alpha particles (He with a +2 charge) that were deflected by the dense inner mass of the nucleus (nucleus). The conclusion that could be drawn from this finding was that atoms were composed of an inner core that comprised the majority of the atom's mass and was positively charged in nature. The work of JJ Thompson using cathode ray tubes demonstrated that all atoms contain small negatively charged subatomic particles, also known as electrons. According to Thomson's conception of the atom, which had negatively-charged electrons buried inside a positively-charged "soup," the atom was made of plum pudding. Protons, electrons, and neutrons are the three fundamental particles that make up an atom. The protons (which are positively charged) and neutrons (which are neutrally charged) are found in the nucleus (center) of an atom (no charge). The electrons are contained inside the electron shells, which are the outermost parts of the atom (negatively charged).

2. Given that the frequency is 1/T, the equation linking wave speed, frequency, and wavelength is v=f t. The relationship between frequency and wavelength is inversely proportional. The wavelength of the wave with the highest frequency is also the shortest. When the frequency is doubled, the wavelength is cut in half. As a result, the wavelength to frequency ratio is the inverse of the frequency to wavelength ratio. When it comes to carrying energy, the frequency and amplitude of the waves are important factors to consider. The higher the frequency, the greater the amount of energy, and the larger the amplitude, the greater the amount of energy.

3. There are four shells that scientists used. First shell contains 2 electrons. Second shell consists of 8 electrons. Third shell has 18 electrons. Lastly, fourth shell has 32 electrons. 2 electrons can fit into each shell. If you want to compute an electron configuration, first split the periodic table into portions that represent the atomic orbitals, which are the locations where electrons are found. The s-block is represented by groups one and two, the d-block by groups three through twelve, the p-block by groups thirteen through eighteen, and the f-block by the two rows at the bottom.

Explanation:

That's the three questions I chose to answer. Hope it helps;)

S2Cl4 = Disulfur Tetrachloride

C5Br8 = N/A

Cl2O3 = Dichlorine trioxide

H2S3 = Trisulfane

Formula: N4S4 = Trisulfur Tetrafluoride

Formula: CBr4 = Hexanitrogen trisulfide

Formula: SiO2 = Heptasilicon

Carry learning!

Stay safe!

Study hard!

Explanation:

c-o number if electrons shared: 4. doubke bond. non polar

c-cl 2 electrons sharde single bond non polar

I know this cause one dash equals 2 electrons chemistry teachers use them when two compounds are sharing electrons rather then using two dots so people know the difference

Answer:

is easy to poiling

Explanation:

also is dificult to melting

The balanced dissociation equation for Cs₂CO₃ is:

Cs₂CO₃(aq) —> Cs⁺(aq) + CO₃²¯(aq)

A dissociation equation is an equation showing the available ions present in a solution.

To obtain the dissociation equation, the compound must be dissolved in water to produce an aqueous solution.

The dissociation equation for Cs₂CO₃ can be written as follow

Cs₂CO₃(aq) —> Cs⁺(aq) + CO₃²¯(aq)

Learn more about dissociation equation: https://brainly.com/question/1903354

Answer:: We're asked to find the molar concentration of the NaCl solution given some titration data.

Explanation:

Answer:

Milk is essentially a colloidal dispersion of fat in water. ... However, the fact remains that the fat and water components cannot be mixed together from a solution. There are therefore, two distinct immiscible liquid phase's present, which is why it is a heterogeneous mixture.

nothing will happen

if you calculate the water potiential for both solutions

you get 2(0.1)(R)(T) and 1(0.2)(R)(T)

which is the same thing, so its isotonic.

Answer:

6KCl(aq) +  Mg3(PO4)2(s)  ...  balanced equation

Explanation:

The mass of CO₂ gas produced during the combustion of one gallon of octane is 8.21 kg.

The given parameters:

The mass of the octane burnt is calculated as follows;

[tex]m = \rho V\\\\m = 0.703 \ \frac{g}{ml} \times 3.79 \ L \ \frac{1000 \ ml}{L} \\\\m = 2,664.37 \ g[/tex]

The combustion reaction of octane is given as;

[tex]2C_8H_{18} + \ 25O_2 \ --> \ 16CO_2 \ + \ 18H_2O[/tex]

From the reaction above:

228.46 g of octane -------------------> 704 g of  CO₂ gas

2,664.37 of octane --------------------> ? of CO₂ gas

[tex]= \frac{2,664.37 \times 704}{228.46} \\\\= 8,210.3 \ g\\\\= 8.21 \ kg[/tex]

Thus, the mass of CO₂ gas produced during the combustion of one gallon of octane is 8.21 kg.

Learn more about combustion of organic compounds here: https://brainly.com/question/13272422

Answer:

true

Explanation:

because they are balance

Answer:

1. How many moles of oxygen will occupy a volume of 2.5 liters at 1.2 atm and 25° C? PV = V (1.2 n. 0821) (298) = 123 mols 2.

2.0 moles of oxygen gas will occupy a volume of 6.67 L at the same temperature and pressure.

Moles is a unit of measurement used in chemistry to express the amount of a substance. It is a counting unit that represents the number of particles, such as atoms, molecules, or ions, in a given sample.

One mole of a substance is defined as the amount of that substance that contains Avogadro's number of particles, which is approximately 6.022 x 10²³. This number is based on the concept that atoms, molecules, and ions are extremely small and difficult to count individually, so using moles allows for a more practical and convenient representation of quantities.

Given:

Moles of oxygen gas (initial) = 0.45 mol

Volume of oxygen gas (initial) = 1.5 L

Moles of oxygen gas (final) = 2.0 mol

Volume of oxygen gas (final) = ?

Using the principle of molar volume, we can set up the following ratio:

(0.45 mol / 1.5 L) = (2.0 mol / V)

V = (1.5 L × 2.0 mol) / 0.45 mol

V = 6.67 L

Learn more about Moles, here:

https://brainly.com/question/26416088

#SPJ6

Answer:

f the vapor pressure of water at 20.0 o C is 17.535 torr, and the atmospheric pressure measured by a barometer was 757.3 torr, what is the partial pressure of H2 in the gas mixture

Partial pressure of H2 in gas mixture is :

739.765 torr .

Total  pressure of mixture =

Partial of hydrogen + Partial pressure of oxygen

Partial of Hydrogen = Total pressure - partial   pressure  of  oxygen

Here total pressure = 757.3 torr

Partial pressure of oxygen = 17 . 535 torr

Total pressure = 757 . 3 - 17 . 533

                        = 739.765 torr.

To learn more about total pressure refer to :

https://brainly.com/question/22264785

#SPJ2

Answer:

A

Explanation:

Alcohol is a type of molecule in propanol. Hence, option A is correct.

Propanol molecular formula is C₃H₇OH.

C₃H₇OH contains -OH functional group which belongs to alcohol.

Hence, option A is correct.

Learn more about propanol here:

https://brainly.com/question/9345701

#SPJ2