pls help me with this

Answer:

Lim reag = NO        .07 mole of O2 left over

Explanation:

From the equation, you need twice as many moles of NO as O2

  2 x moles O2 =     2 * .503 moles = 1.06 moles of NO needed....you do not have enough so this is the limiting reagent    O2 will be left over

    1/2 * .866 = .433  moles of O2 used    .503 - .433 = .07  mole O2 leftover

Based on the milligram per Kg of soil sample of each analyte, calcium ion, Ca2+ and magnesium ion, Mg2+ are both classified as macronutrients.

Soil nutrients are minerals which are found present in the soil and which are required by plants for their growth and development.

Soil nutrients can be classified based on amount needed by plants as well as the amount present in the soil into:

The mg/Kg of each analyte in the soil sample is as follows:

mass of soil sample = 2.65 g = 0.00265 kg

Calcium ion:

amount per mg/Kg of soil sample = 0.625mg/0.00265 kg

amount per mg/Kg of soil sample = 236 mg/kg

Magnesium ion:

0.00245 g = 2.45 g

amount per mg/Kg of soil sample = 2.45 mg/0.00265

amount per mg/Kg of soil sample = 924 mg/Kg

Therefore, calcium ion, Ca2+ and magnesium ion, Mg2+ are both classified as macronutrients.

Learn more about soil nutrients at: https://brainly.com/question/8901446

Answer: Smelling salts and oxygen are introduced into a metal catalyst-containing tube (platinum). Typically warmed to get the reaction started. The alkali is then oxidized to produce nitric oxide.

Answer:

The Ostwald process is a chemical process used for making nitric acid. Wilhelm Ostwald developed the process, and he patented it in 1902. The Ostwald process is a mainstay of the modern chemical industry, and it provides the main raw material for the most common type of fertilizer production

Explanation:

The first stage of the Ostwald process involves the catalytic oxidation of ammonia into nitric oxide, using platinum as the catalyst. The nitric oxide is then transferred to a different oxidizing tower, where it is oxidized into nitrogen dioxide

[tex]\large\red{\underline{\textbf{Given:-}}}[/tex]

Answer:

WHR Boilers

Explanation:

I hope this helps.

Answer:

D

Explanation:

weathering is the breaking down of physical components through unfavorable weather conditions which can likely cause a change in physical properties

Answer:

the answer has been given below have a good day

Explanation:

mark as brainiest

The species are present at 10-6 mole/L or greater when dissolved in water is when in solutions, weak acids and bases partially ionize.

Ionization is defined as anything that causes electrically neutral atoms or molecules to gain or lose electrons in order to become electrically charged atoms or molecules (ions).  One of the main mechanisms by which radiation, including charged particles and X-rays, transmits their energy to matter is ionization. An anion is created when an atom or molecule picks up an electron; a cation is created when they lose an electron.

Weak Acids and Weak Bases Ionizing. Numerous acids and bases are weak, meaning they do not completely ionize in aqueous solution. The nonionized acid, hydronium ion, and conjugate base of a weak acid are all mixed together to form a solution in water, with the nonionized acid being present in the highest concentration.

Thus, the species are present at 10-6 mole/L or greater when dissolved in water is when in solutions, weak acids and bases partially ionize.

To learn more about ionization, refer to the link below:

https://brainly.com/question/28385102

#SPJ2

Answer:

See below

Explanation:

From periodic chart

Mg = 24.305 gm per mole

24.305 * 3 = 72.915 gm

Na = 22.989

Cl = 35.45            summed = 58.439 gm per mole

   58.439 * 4.2 = 245.4438 gm

Answer:

The Relationship between Pressure and Volume: Boyle's Law

As the pressure on a gas increases, the volume of the gas decreases because the gas particles are forced closer together. Conversely, as the pressure on a gas decreases, the gas volume increases because the gas particles can now move farther apart

Answer:

Aerosol cans are pressurized, High temperatures increase the pressure in an aerosol can, potentially to the point of explosion.

The reaction mechanims shows the sequence of steps through which a reaction occurs. The reaction mechanism for this reaction is;

step 1: NO2 + NO2 → NO + NO3 (slow)

step 2: NO3 + CO → NO2 + CO2 (fast)

We have to note that not all reactions occur in a single reactive encounter. If a reaction occurs in a single reactive encounter then it is called an elementary reaction.

The reaction mechanim shows the reaction sequence of a non elementary reaction. The correct mechanims of this reaction is shown as;

step 1: NO2 + NO2 → NO + NO3 (slow)

step 2: NO3 + CO → NO2 + CO2 (fast)

Learn more about a reaction mechanism: https://brainly.com/question/26690612

Answer:

0.109

Explanation:

0.4-0.291=0.109

Explanation:

nose amigo, la verdad yo también tengo dificultades escolares muchísimas gracias, Dios te bendiga en otro idioma por cierto mi anime favorito es cowboy beboop

Answer:

2g is the answer

Explanation:

based on google

Answer:

True

Explanation:

Answer:

true

Explanation:

Explanation:

N2 (g) + H2 (g) gives out NH3 (g)

Now balance it. You have two reactants with compositions involving a single element, which makes it very easy to keep track of how much is on each side. I would balance the nitrogens, and then the hydrogens.

Now balance it. You have two reactants with compositions involving a single element, which makes it very easy to keep track of how much is on each side. I would balance the nitrogens, and then the hydrogens.(If you balance the hydrogen reactant with a whole number first, I can guarantee you that you will have to give NH3 a new stoichiometric coefficient.)

N2 (g) + 3H2 (g) gives out 2NH3 (g)

The stoichiometric coefficients tell you that if we can somehow treat every component in the reaction as the same (like on a per-mol basis, hinthint), then one "[molar] equivalent" of nitrogen yields two [molar] equivalents of ammonia.

Luckily, one mol of anything is equal in quantity to one mol of anything else because the comparison is made in the units of mols.

So what do we do? Convert to

mols (remember the hint?).

28g N2 × 1 mol N2/ 2 × 14.007) g N2

= 0.9995 mol N2

At this point you don't even need to calculate the number of mols of H2 . Why? Because H2 is about 2 g/mol, which means we have over 10 mols of H2. We have 1 mol N2, and we need three times as many mols of H2 as we have

N2.

After doing the actual calculation you should realize that we have about 4 times as much H2 as we need. Therefore the limiting reagent is clearly N2.

Thus, we should yield 2×0.9995=1.9990 mols of NH3 (refer back to the reaction). So this is the second and last calculation we need to do:

1.9990 mol NH3 × 17.0307 g NH3/ 1 mol NH3

= 34.0444 g NH3

Hope it helpz~

34grams of NH₃ can be produced from the reaction of 28g of N₂ and 25g of H₂ and 19g of the excess reagent is left over.

The mole is an amount unit similar to familiar units like pair, dozen, gross, etc. It provides a specific measure of the number of atoms or molecules in a bulk sample of matter.

A mole is defined as the amount of substance containing the same number of atoms, molecules, ions, etc. as the number of atoms in a sample of pure 12C weighing exactly 12 g.

Given,

Mass of N₂ = 28g

Mass of H₂ = 25g

Moles of N₂ = mass / molar mass

                    = 28 / 28

                   = 1 mole

Moles of H₂ = 25 / 2

                     = 12.5 moles

Since the number of moles of N₂ is lesser, the amount of products formed depends on the moles of N₂.

From the reaction,

1 mole of N₂ gives 2 moles of NH₃

So, Mass of NH₃ in 2 moles = 2 × 17

                                              = 34g

B) From the reaction,

1 mole of N₂ reacts with 3 moles of H₂.

The number of Moles of H₂ left = 12.5 - 3

                                                    = 9.5 moles

Mass of excess reagent left = moles left × molar mass of H₂

                                             = 9.5 × 2

                                             = 19g

Therefore, 34grams of NH₃ can be produced from the reaction of 28g of N₂ and 25g of H₂ and 19g of the excess reagent is left over.

Learn more about Moles, here:

https://brainly.com/question/20486415

#SPJ7

Answer:

Explanation:

General Remarks

The balance numbers are the same. (The balance numbers are 2 and 2)

The balance number in front of the O2 is 1.

So for every mole of O2 needed 2 moles of NO2 should be produced.

If 10.0 moles of oxygen is used, then you should get 20 mols of NO2 should be produced.

Formula

% yield = (what was produced / what should have been produced) *100

Givens

What was produced = 7 moles

What should have been produced = 20 moles

Solution

Substitute the givens into the equation

% yield = 8/20 * 100

% yield = 0.40 * 100

Answer: 40%

Answer:

Socratic app

Explanation:

it will help you

Explanation:

Zn + Sn3(PO4)4 = Zn3(PO4)2 + Sn - Balanced Chemical Equation

4.3 is limiting

is the answer

if you like my answer please like comment and mark me as brilliant

The calculated percentage purity of the original sample of calcium carbonate is 44%.

In the back titration of the excess acid, we neutralize the excess titrand left in a system.

We have the reaction equation;

CaCO3 + 2HCl ----> CaCl2 + H2O + CO2

To get the moles of HCl = 0.2254 M * 20/1000 L = 0.0045 moles

The reaction involving the excess acid occurs thus;

HCl + NaOH ----> NaCl + H2O

Number of moles of NaOH = 0.1041 M * 20/1000 = 0.0021 moles

We have a  1:1 hence 0.0021 moles of HCl reacted also

Number of moles of HCl that reacted with CaCO3 initially = 0.0045 moles - 0.0021 moles = 0.0024 moles

Given the stoichiometry of the reaction,  0.0012 moles of CaCO3 reacted.

Hence;

Mass of pure CaCO3 in the sample= 0.0012 moles * 100 g/mol = 0.12g

Percent purity of the sample = 0.12g/0.2719 g * 100/1

= 44%

Learn more about percent purity: https://brainly.com/question/10962305?

For the excited state of Ca at the absorption of 422.7 nm light,the energy difference  is mathematically given as

E= 4.70x10-22 kJ/mol

Generally, the equation for the Energy  is mathematically given as

E = nhc / λ

Where

h= plank's constant

h= 6.625x 10-34 Js

c = speed of light

c= 3x 108 m/s

Therefore

E = 1*(6.625x 10-34 Js)( 3x 10^8 m/s) / ( 422.7x10^-9)

E= 4.70x10-22 kJ/mol

In conclusion, Energy  

E= 4.70x10-22 kJ/mol

Read more about Energy

https://brainly.com/question/13439286

Answer:

I think the answer is going to be d A single atom cannot be isolated, so only the average size of a group of atoms can be measured. :)

Have an amazing day!!

Please rate and mark brainliest!!

Answer: A. The r.a.m. value is used to determine how many isotopes an element has.

Explanation: Founders Educere Answer

I love you fellow summer school students, good luck.

Please rate and mark brainliest!!

Answer:

They contain and control nuclear chain reactions that produce heat through a physical process called fission. That heat is used to make steam that spins a turbine to create electricity

Explanation:

Answer:

2H+(aq) + 2Br-(aq) + Mg2+(aq) + S2–(aq) = Mg2+(aq) + 2Br-(aq) + H+(aq) + HS-(aq)

Decay of Uranium-238 produces gamma radiaton whereas decay of thorium-234 releases beta radiation.

In the decay of U-238, two gamma rays of different energies are emitted in addition to the alpha particle while on the other hand, in the decay of thorium-234 , beta rays are emitted.

So we can conclude that decay of Uranium-238 produces gamma radiaton whereas decay of thorium-234 releases beta radiation.

Learn more about decay here: https://brainly.com/question/25537936

Answer:

H30,+ion is known as Hydroniom Ion

Explanation:

brain ly ----

everyday

brainless this answer is correct

If 4.0 L of a 4.6M SrCl2 solution is diluted to 45L, the molarity of the diluted solution is 0.41M.

The molarity of a diluted solution can be calculated using the following formula:

M1V1 = M2V2

Where;

According to this question, 4.0 L of a 4.6M SrCl2 solution is diluted to 45L, the molarity of the diluted solution is calculated as follows:

4.6 × 4 = 45 × M2

18.4 = 45M2

M2 = 18.4/45

M2 = 0.41M

Therefore, if 4.0 L of a 4.6M SrCl2 solution is diluted to 45L, the molarity of the diluted solution is 0.41M.

Learn more about molarity at: https://brainly.com/question/2817451

Answer:

Ok giv me a min

Explanation:

A) wave speed = frequency x wave length

B) Time period = 1/frequency

C) Power = work done/ time taken

D) Kinetic energy = 0.5 x mass x velocity^2

E) Ep = mass x gravitational field x height

F) Ee = 0.5 x spring constant x extension^2

Hope this helps!

Answer:

d) I, III, and IV

Explanation:

rust, copper oxidation, and percipitate from a chemical reaction are all, well, chemical reactions.