please help n let me know thank u

Please Help N Let Me Know Thank U

Answers

Answer 1
I can’t see the question clearly can you type it

Related Questions

How many molecules of carbon dioxide and how many molecules of water would be produced from 4 molecules of methane (CH4) reacting with 8 molecules of oxygen (O2)

Answers

Answer:

4

Explanation:

water would be produced from 4 molecules of methane (CH4) reacting with 8 molecules of oxygen (O2)

The products of the combustion of hydrocarbon are 4 molecules of carbon dioxide and 8 molecules of water.

What is the combustion reaction?

A combustion reaction can be described as a reaction that produces fire and takes place at a high temperature. It is an exothermic reaction as well as a redox reaction that usually takes place between a fuel and mostly oxygen gas.

Examples of Combustion Reactions such as during the combustion of 4 molecules of methane reacting with 8 molecules of oxygen gas to give carbon dioxide and two molecules of water.

[tex]4CH_4 + 8O_2\longrightarrow 8H_2O + 4CO_2[/tex]

Oxygen is the essential reactant for combustion because the combustion is not possible in the absence of oxygen. Complete combustion takes place when a fuel burns completely to produce heat with oxygen and carbon dioxide.

The burning of wood fuels in the presence of air is an example of combustion. The carbon present in wood reacts with oxygen gas in the air to liberate heat and form gaseous products.

Learn more about combustion reaction, here:

brainly.com/question/12172040

#SPJ2

helpppppppppppppppppppppppppppp

Answers

Answer:

1)

Explanation:

ok this is a write answer

4) Water warms up and becomes vapor

If a aluminum cube had a mass of 20g and the length of each side was 2cm between what to liquids would it float?

Answers

Answer:

density=20/8 g/cc=2.5 g/cc

Mercury is more dense, so aluminum will float on it. Water is less dense, so the aluminum will be below water.

Aluminum will float atop mercury because it is more dense than it. Due to water's lower density, the metal will lie below the surface.

What is density?

Density is defined as the measure of how densely a material is packed together.

It can also be defined as the mass of a solid substance per unit volume.

Density is important because it enables us to predict which compounds will float and which will sink in a liquid, density is a crucial notion. As long as an object's density is lower than the liquid's density, it will often float.

The term "density" refers to the relationship between a substance's mass and the volume it takes up in space. The mass, size, and arrangement of an object's atoms influence its density.

Density can be expressed as

Density = mass / volume

There are two types of density.

Absolute densityRelative density

Thus, aluminum will float atop mercury because it is more dense than it. Due to water's lower density, the metal will lie below the surface.

To learn more about density, refer to the link below:

https://brainly.com/question/15164682

#SPJ2

What would you name this molecule?

Answers

Answer:

H2O is the name of this molecule and it is water

find the major product​

Answers

The answer is B.

Back-side attack by water at the more substituted carbon.

You can follow the steps.

Step1: Electrophilic attack forms a bromonium ion intermediates.

Step2: Back-side attack by water at the more substituted carbon opens the bromonium ion intermediates.

Step3: H2O removes a proton from the intermediates.

in which process water partially breaks down into charged particles?

Answers

Answer:

presipitayion

okkkkkkkkkkkkkkkkkkkkkkkkkkk

Which atom would you expect to have a larger atomic
radius—francium or tennessine?

Answers

Answer:

Francium bc it has the largest atomic radius

Francium has the greatest atomic radius. Despite being a highly radioactive metal with a short half-life, francium has little environmental impact.

What is francium?Francium is a chemical element with the atomic number 87 and the symbol Fr. Francium-223, its most stable isotope, has a half-life of only 22 minutes, making it extremely radioactive. It is the second-most electropositive element and the second-rarest naturally occurring element, trailing only caesium.Francium has been used to study atomic structure in addition to being used in chemistry and research. It is used in the diagnosis and treatment of cancer. It is also used in a number of spectroscopic experiments. Despite being a highly radioactive metal with a short half-life, francium has little environmental impact. Francium is created by bombarding radium with neutrons in a nuclear reactor. It is also possible to create it by bombarding thorium with protons.

To learn more about francium refer to:

https://brainly.com/question/9050178

#SPJ2

what happens when co2 dissolves in water​

Answers

CO2 is in acidic gas so when it’s mixed with water it forms a weak acid called carbonic acid , It’s a really common acid and it only comes in solution form and it is found in aerated drinks like carbonated sodas and soft drinks.

What indicates that two objects are in thermal equilibrium?
A The Objects Are the same size
B The objects Have the same temperature
C The objects are touching each other.
D The objects' temperatures are changing.

Answers

Answer:

B

Explanation:

equilibrium happens when two things are in complete balance and thermal is in reference to heat so two things are in thermal equilibrium once they have the same temperature.

The option which indicates that two objects are in thermal equilibrium is the objects that have the same temperature. Thus, the correct option for this question is B.

What is Thermal equilibrium?

Thermal equilibrium may be defined as a state of a system in which all the parts of the system occupy the same temperature. Two or more objects are in thermal equilibrium if there is no net flow of thermal energy or heat between them when they are considerably connected by a path permeable to heat.

The mechanism of thermal equilibrium occurs when a cup of hot coffee is put on the table and after a short period of time, the temperature of the coffee is the same as the surrounding temperature. So, this represents an example of thermal equilibrium.

Therefore, the correct option for this question is B.

To learn more about Thermal equilibrium, refer to the link:

https://brainly.com/question/9459470

#SPJ2

How did max planck contribute to the modern atomic theory?

Answers

Answer:

Planck made many contributions to theoretical physics, but his fame rests primarily on his role as originator of the quantum theory. This theory revolutionized our understanding of atomic and subatomic processes, just as Albert Einstein's theory of relativity revolutionized our understanding of space and time

Answer:

revolutionized our understanding of atomic and subatomic processed

Element is in group 15. Element Y is in group 17. Both of these elements are
In the compound XY3, there are
shared electron pairs.

Answers

Answer:

join id(8606512121) pas(12345)

1.) non metals.
2.) three.

what is the total amount of energy absorbed by the substance as it completely changes from a solid at 40 degrees to a gas at 200 degrees

Answers

Answer:

I don't know the answer sorry man

What is volume?

A. The amount of space an object takes up
B. The amount of matter in an object or substance
C. The length of an object
D. The number of particles in an object or substance

Answers

B is correct answer

Answer:

Volume is the amount of space an object takes up. I hope this helps you! :D

Complete the table below by deciding whether a precipitate forms when aqueous solutions A and B are mixed. If a precipitate will form, enter its empirical
formula in the last column.
solution A
solution B
Does a
precipitate form
when A and B
are mixed?
Oyes no
empirical
formula of
precipitate
х
X
x
5
?
copper(II) chloride
sodium sulfide
potassium sulfate
O yes no
lead(II) nitrate
ammonium bromide
sodium hydroxide
O yes no
Que

Answers

The reaction between copper II chloride and sodium sulfide as well as lead II nitrate and potassium sulfate both produce precipitates.

The solubility of a substance in water is in accordance with the solubility rules.  It is possible that a solid product may be formed when two aqueous solutions are mixed together. That solid product is referred to as a precipitate.

Now, we will consider each reaction individually to decode whether or not a precipitate is possible.

In the first reaction, we have; CuCl2(aq) + Na2S(aq) ---->CuS(s) + 2NaCl(aq). A precipitate (CuS) is formed.In the second reaction, Pb(NO3)2(aq) + 2KNO3(aq) ----> PbSO4(s) + KNO3(aq), a precipitate PbSO4 is formedIn the third reaction, NH4Br(aq) + NaOH(aq) ----->NH3(g)  + NaBr(aq) + H2O(l), a precipitate is not formed here.

Learn more: https://brainly.com/question/11969651



A 623 ml sample of gas at STP is allowed to expand (like the universe) until it

occupies a volume of 1200 ml, What temperature would be needed to return the

gas to standard pressure? (all trying to find some equilibrium)

P

T

V

Initial latm

623

Final

loton

Effect



212

Yoo

&

a. What variables are constant? (NOT CHANGING!)

Answers

12000 ml would be d to my calculations but then u can 12

Pls help I don’t understand: Which of these is a balanced chemical reaction?

A) CO + O2–>CO2

B) CO + 2O2–> 2CO2

C) 2CO + O2—> 2CO2

D) 2CO + 2O*small 2 not 202*—> 2CO2

Answers

Answer:

C) 2CO + O₂ →   2CO₂

Explanation:

The equation C is correct.

2CO + O₂ →   2CO₂

This equation have four oxygen atom and two carbon atoms on both side of equation. So it is correctly balanced.

All others are incorrect:

A) CO + O₂ →   CO₂

this is incorrect because there are three oxygen atoms on left while two atoms on right.

B) CO + 2O₂ →   2CO₂

this is incorrect because there are five oxygen atoms on left while four atoms on right.

D)  2CO + 2O₂ →   2CO₂

this is incorrect because there are six oxygen atoms on left while four atoms on right.

How do Hydrogen-1, Hydrogen-2, and Hydrogen-3 differ from each other?

Answers

Answer:

different from the number of their neutrons

Explanation:

They each have one single proton (Z = 1), but differ in the number of their neutrons. Hydrogen has no neutron, deuterium has one, and tritium has two neutrons. ... Their nuclear symbols are therefore 1H, 2H, and 3H. The atoms of these isotopes have one electron to balance the charge of the one proton.

What is a small description of a atom

Answers

An atom is the smallest component of an element and the smallest unit of matter.


Where is groundwater stored?


Answers

Answer:

Answer Below! : )

Explanation:

Groundwater is stored in the tiny open spaces between rock and sand, soil, and gravel. How well loosely arranged rock (such as sand and gravel) holds water depends on the size of the rock particles.

Hope this helps! : )

Answer:

Underground  brainliest plz

Explanation:

highlight main approaches that could be used to investigate the waterer Quality.​

Answers

Answer:

Seven methods were used to assess water quality in the river system. These methods included single-factor assessment, water quality grading, comprehensive pollution index, the Nemerow pollution index, principle component analysis, fuzzy comprehensive evaluation, and comprehensive water quality identification index.

Muối sunfua với hidro sunfua có giống nhau về tính chất vật lý không ạ. Ứng dụng và điều chế muối sufua như thế nào ạ

Answers

the answer is is is is is is is is is is is is is is

what classifies materials as a pure substance or a mixture

Answers

Answer:

A pure substance is a form of matter that has a constant composition and properties that are constant throughout the sample. Mixtures are physical combinations of two or more elements and/or compounds.

A total solar eclipse occurs because the moon can totally block the sun. If the moon was smaller or farther from earth, a total eclipse

Could occur

Could not occur

Answers

Answer:

both

Explanation:

id say that it could occur but also not as much. the moon would be smaller and further from the earth to where we would barely be able to see it. if the full moon is barely visible then im sure the total solar eclipse wouldn't be as noticeable as it is now. but thats just my opinion

A car slows to a velocity of 20 m/s and weighs 20 kg. Does the car have momentum? If so, what is the momentum of the car?

Answers

Answer:400

Explanation:

20x20

P(momentum)= mxv

Mass times velocity = momentum

Acetone [(CH3)2C=O], a simple ketone is commonly used to make products like nail polish remover and paint remover. Draw a picture showing the orbitals involved in the and bonds including its lone pairs.​

Answers

Carbon and oxygen atoms in (CH3)2C=O form sigma and pi bonds. The pi bonds are formed using unhybridized p orbitals.

Acetone (CH3)2C=O contains the carbonyl group (C=O). Carbon is bonded to oxygen via a double bond as shown in the orbital structure. The carbon atom is also bonded to two methyl groups.

The central carbon  atom is sp2 hybridized as well as the oxygen atom in acetone. The pi bond is formed by the overlap of unhybridized p orbitals on both carbon and oxygen atoms. The sigma bonds are formed using the sp2 hybridized carbon atoms on carbon and oxygen.

Learn more: https://brainly.com/question/14569599

Magnesium reacts with a certain element to form a compound with the general formula MgX. What would the most likely formula be for the compound formed between Lithium and element X?

Answers

Answer:K2X

Explanation: Valency can be defined as the combining power of an element. It is the valency that dictates the value an element will have when writing a chemical formula for its compound.

MgX is a compound of magnesium and an element X. The valency of magnesium in most of its compound is +2. Now for the 2 to have been absent in the chemical formula, this shows that the element X itself have a valency if -2 for the valencies of both to have canceled out.

Now considering the element potassium, it is an alkaline metal belonging to group 1 of the periodic table. Hence, it is expected that it has a valency of +1

Forming a compound with element X means there would be an exchange of valencies between the two. We have established that x has a valency of -2. The formula of the compound thus formed by exchanging the valencies of both element would be K2X

The chemical formula for the compound formed between Lithium and element X is Li₂X.

What is valency?

Valency can be described as the combining power of a chemical element. It is the valency that describes the value an element will have in the chemical formula for that compound.

MgX compound is a compound of magnesium and an element X. The valency of magnesium is +2.  The chemical formula shows that the element X itself has a valency of -2 which gave a neutral compound.

Now given element is Lithium, it is an alkali metal of group 1 of the periodic table. It has a valency of +1 as it has one electron in its valence shell.

Forming a compound with element X, there will be an exchange of valencies between the two. As element X has a valency of -2. The formula of the formed compound by exchanging the valencies of Lithium and element X would be Li₂X

Learn more about Valency, here:

https://brainly.com/question/12744547

#SPJ6

The change in internal energy for the combustion of cyclohexanol (C6H12O) is -890.7 Kcal per mole. A .708 g sample of cyclohexanol undergoes complete combustion in a bomb calorimeter that has a heat capacity of 2.70 Kcal per degree C. What is the final temperature of the water in the calorimeter if the initial water temperature is 27C?

Answers

The final temperature in the calorimeter, with a heat capacity of 2.70 kcal/°C, internal energy for the combustion of cyclohexanol (C₆H₁₂O) of -890.7 kcal/mol and initial temperature of 27°C, is 29.33 °C.

We can find the final temperature of the water in the calorimeter with the following equation:

[tex]\Delta E = -C\Delta T = -C(T_{f} - T_{i})[/tex]    (1)

Where:

ΔE: is the change in internal energy for the combustion of C₆H₁₂O = -890.7 Kcal/mol

C: is the heat capacity of the calorimeter = 2.70 Kcal/°C

[tex]T_{f}[/tex]: is the final temperature =?

[tex]T_{i}[/tex]: is the initial temperature = 27 °C

By solving equation (1) for [tex]T_{f}[/tex], we have:

[tex] T_{f} = -\frac{\Delta E}{C} + T_{i} [/tex]

[tex]T_{f} = -\frac{-890.7 \frac{kcal}{mol\: C_{6}H_{12}O}*\frac{1 mol \: C_{6}H_{12}O}{100.158 g \: C_{6}H_{12}O}*0.708 g \: C_{6}H_{12}O}{2.70 kcal/^{\circ}C} + 27 ^{\circ}C = 29.33 ^{\circ}C[/tex]  

Therefore, the final temperature of the water is 29.33 °C.

Learn more here:

https://brainly.com/question/15776016?referrer=searchResults  

I hope it helps you!

helppppppppppppppppppp

Answers

Answer:B

Explanation:As the water heats up the particles will speed up hitting and colliding with each other which makes the water hot

Answer:

A.

B. the speed of the particles will increase because the thermal energy of the water in the beaker increases

B.

B. the water particles got smaller and now take up less space

On the 14 point pH scale, soaps and cleaning solutions are typically -

Question 7 options:

0-6


8-14


7

Answers

Answer:The answer is 8-14

Explanation:It can range from 9-10 or

or above to 14 depending on the amount of leached wood ash(lye) a.k.a potassium carbonate which is an alkalline compound

Answer:

8-14

Explanation:

Multiple choice (ASAP!)

Answers

Answer:

c

Explanation:

oxygen is lost electrons are added in oxidation state is decreased

Answer:

the correct answer is C

hope this helps <3

Other Questions
1.Which term describes the sum of the number of protons and neutrons in an atom? Why do we use the mole concept ?? what is the maximum cold holding temperature allowed for sliced watermelon? Which Statement about North America is True?O The seasons are the opposite of South AmericasO It's highest mountains are on the east coast.O Much of it is rainforestO It has no major urban centers HEELP ME THIS DUE NOWSorry I couldn't find science how long does it take for a body to start decomposing What can you multiply 2 to 10 by to get the ratio of 4 to 20 A dump truck can hold 2 tons of gravel. The pay loader loading the truck puts 750 pounds of gravel in the truck at one time. How many loads does the pay loader need to dump in the truck before it is full? Mr. Chen hires an electrician to install the light fixtures for an addition to his house. The electrician charges an initial fee plus an hourly rate for the number of hours it will take to complete the installation. The function y=120+55x can be used to model the total cost of the job, in dollars. What is the independent variable in this situation, and what does it represent? Heredity is the transmission of genetic traits from parents to their offspring. Please select the best answer from the choices provided T F LCM. Problem about how lcm works. picture in comments. And for a little while they halted in sorrowful silence at the place where the windmill had once stood.The phrase sorrowful silence is an example of _______________.AlliterationPersonificationA metaphorPersonification and alliteration 1._______ is what farmer should do in order that plant will grow fast and productive?2._______a practice to help promote the growt of root's and improve aeration for fast absorption by the soil.4._______is also called rows cultivation and is done only by cultivating the soil in rows or between the two plants are being cultivated.5._______is cultivating the soil towards the base of the plant or cultivation around the plant. what is the approximate length of segment PR?251112518 what classifies materials as a pure substance or a mixture If 1=32=33=54=45=4Then, 6=? Find the length of the shorter leg of a right triangle if the longer leg is 11 feet more than the shorter leg and the hypotenuse is 11 feet less than twice the shorter leg. Pa help po plis papasa na daw po bukas I NEED HELP REALLY BADLYHow could you use geographic tools and ideas to understand your community?3 minute speech.100 points, 5 star, and brainliestPLEASE define a function calc_pyramid_volume() with parameters base_length, base_width, and pyramid_height, that returns the volume of a pyramid with a rectangular base. calc_pyramid_volume() calls the given calc_base_area() function in the calculation. relevant geometry equations: volume = base area x height x 1/3 (watch out for integer division). sample output with inputs: 4.5 2.1 3.0 volume for 4.5, 2.1, 3.0 is: 9.45