The designation "4" before Na2SO3 simply means that there are four molecules of sodium sulfite.
A molecule is formed when two or more atoms of the same or different elements come together. The formula of the molecule must reflect the number of atoms from which it is formed. The designation "4" before Na2SO3 simply means that there are four molecules of sodium sulfite.
The "The World on Turtle's Back" is a legend creation story. According to this story, the world was created on a giant turtle back. The folktale is common among the Iroquois Native Americans.
Learn more: https://brainly.com/question/19922822
What are electron Subshells?
Answer:
a subshell is a subdivision of electron shells that are separated by electron orbitals.
Explanation:
(subshells are labeled s,p,d, and f in an electron configuration)
please help me on this question plizzźzz
what is the green colouring matter found in plants called
Answer:
the answer is chlorophyll....
Explanation:
if u need it's purpose just let me know
Explanation:
the green colouring matter found in plants is called chlorophyll.
At room temperature Bromine is a liquid and lodine is a solid, what can be inferred
about the intermolecular forces of these two elements?
Answer:
Explanation:
The intermolecular forces are stronger in Iodine, meaning that its molecules are stronger and can hold that solid structure at room temperature, where Bromine cannot due to its IMF's being weaker.
what is the relationship between plants soil and nutrients?
Answer:
Soil helps anchor plants and provides them essential elements of water and nutrients. Plants prevent soil erosion and provide organic matter.
Explanation:
Why does liquid move like it does when heated on the right side?
Answer:Liquids expand for the same reason, but because the bonds between separate molecules are usually less tight they expand more than solids.
Explanation:Heat causes the molecules to move faster, (heat energy is converted to kinetic energy ) which means that the volume of a gas increases more than the volume of a solid or liquid.
How does VSEPR theory describe the double bonds between the central carbon atom and each oxygen atom of Co2?
The double bonds in CO2 are counted as single regions of electron density.
The valence shell electron pair repulsion theory VSEPR is a description of the shape of molecules based on the number of electron pairs that surround the central atom in the molecule. Double bonds are counted as a single region of electron density.
Hence, the two double bonds in CO2 are counted as two regions of electron density around the central carbon atom. Hence, the molecule is liner at a bond angle of 180 degrees.
Learn more about VSEPR theory: https://brainly.com/question/14225705
Which of the following is a correctly balanced equation? A. NaClO3 → NaCl 3O2 B. 2HgO → 2Hg O2 C. 2ZnS O2 → 2ZnO 2SO2 D. 4CO Fe3O4 → 4CO2 Fe E. 2Fe 2Cl2 → 2FeCl3.
Answer:
yes is the anser
Explanation:
i donyt know how to be wrong
The correctly balanced equation among the options is 2HgO → 2Hg + O2.
BALANCING CHEMICAL EQUATION:Balancing a chemical equation means ensuring that the number of atoms of each element on both sides of the equation are the same in accordance to the law of conservation of mass.
To balance a chemical equation, we make use of coefficients, which are numbers placed in front of the element or compound in the reaction.
According to this question, the following equation: 2HgO → 2Hg + O2, is correctly balanced because the number of atoms of Hg (2) and O (2) are the same on both sides.
Learn more about balancing chemical equations at: https://brainly.com/question/8062886
What would happen if you broke a magnet in half?
Answer:
Option DExplanation:
Since the whole magnet is magnetized, when you break a magnet in two parts, you will receive 2 mini magnets which will work just like a magnet.
Hoped this helped.
[tex]BrainiacUser1357[/tex]
Answer:
4
The two pieces would each have a north and south end
True/False: For the same system, heterogeneous nucleation will occur at less undercooling than homogeneous nucleation.
Answer:
True.Explanation:
same system, heterogeneous nucleation will occur at less undercooling than homogeneous nucleation.
Zn-71 has a half life of 2.4 minutes. If one had 100g at the beginning, how many grams would be left after 12 minutes?
3.125g
Explanation
2.4 minutes = 1 half life
so 12 minutes = 5 half lives (12/2.4)
100g/2 = 50g (1 half life)
50g/2 = 25g (2 half lives)
25g/2 = 12.5g (3 half lives)
12.5g/2 = 6.25g (4 half lives)
6.25g/2 = 3.125g (5 half lives)
One of the main properties used to describe a population
Answer:
Birth rate, death rate, emigration, immigration, or a census.
Explanation:
How many total atoms does 3Na2S2O3 have
Answer:
21
Explanation:
Let us count the number of individual atoms for Na2S2O3 (the compound name):
Na: 2
S: 2
O: 3
This brings us to a total of 7 atoms for one molecule of sodium thiosulfate. For three of these compounds, we get 3*7=21
The chemical equation below shows the burning of magnesium (Mg) with oxygen (O2) to form magnesium oxide (MgO). 2Mg O2 Right arrow. 2MgO The molar mass of O2 is 32. 0 g/mol. What mass, in grams, of O2 is required to react completely with 4. 00 mol of Mg? 2. 00 64. 0 128 256.
Answer:
is the hoodie oh ok with that being a good day to be a good time with my friends and I have exam next to me that I am a very happy to be the best of the day
and
he is the best way possible for me
The mass of oxygen required for complete utilization of 4 mol of Mg has been 64 g. Thus, option B is correct.
The balanced equation for the reaction has been:
[tex]\rm 2\;Mg\;+\;O_2\;\rightarrow\;2\;MgO[/tex]
From the balanced chemical equation, for complete utilization of 2 moles of Mg, 1 moles of oxygen has been used.
The given moles of Mg has been 4 mol. The moles of oxygen required can be given as:
[tex]\rm 2\;mol\;Mg=1\;mol\;O_2\\4\;mol\;Mg=2\;mol\;O_2[/tex]
Thus, the moles of oxygen required has been 2 mol for complete utilization of 4 mol Mg.
The mass from moles can be calculated as:
[tex]\rm Mass=Moles\;\times\;molecular\;mass[/tex]
The molecular mass of oxygen has been 32 g/mol.
The mass of oxygen has been:
[tex]\rm Mass=2\;\times\;32\;g\\Mass=64\;g[/tex]
The mass of oxygen required for complete utilization of 4 mol of Mg has been 64 g. Thus, option B is correct.
For more information about the chemical equation,refer to the link:
https://brainly.com/question/20492533
2) Nitrogen gas will react with hydrogen gas to produce ammonia, NH3, How many
moles of hydrogen gas are required to produce 0,86 moles of NH3?
Answer:
12 grams of hydrogen gas
and 56 grams of nitrogen gas
The molar mass of ammonia is 17 g/mol.
68 grams of ammonia corresponds to
17g/mol
68g
=4moles
4 moles of ammonia will be obtained from
2
4×1
=2 moles of nitrogen and
2
4×3
=6 moles of hydrogen.
The molar masses of nitrogen and hydrogen are 28 g/mol and 2 g/mol respectively.
2 moles of nitrogen corresponds to 2×28=56 grams.
6 moles of hydrogen corresponds to 6×2=12 grams.
what are three different facts about mass
plz tel will give brainlyest
Answer: all mass takes up space. everything has mass. Theres a unit of mass called a slug thats not the bug!
Explanation:
Why is eating animals to obtain energy considered exothermic
Which of the following is the correct chemical symbol for Aluminium?
A: AL
B: Al
C: aL
D: al
Which statement describes why sodium reacts more vigorously than magnesium to hydrochloric acid? Refer to the periodic table. Circle the letter of the correct answer.
1) Sodium has a smaller atomic radius than magnesium.
2)Sodium has a lower ionization energy than magnesium.
3)Magnesium has a lower ionization energy than sodium.
Answer:
Its B all the others arent true and also dont make any sense
Explanation:
Sodium has a lower ionization energy than magnesium describes why sodium reacts vigorously than magnesium chloride.
Why is sodium more reactive than magnesium?Sodium is more reactive than magnesium because it has the ability to easily lose electron, hence have lower ionization energy.Sodium belong to group one on the periodic table and they are called akali metal while magnesium belong to group two on the periodic table and they are called alkali Earth metal.Sodium and magnesium belong to the in the 3rd period. Iin the outermost energy level sodium has one electron but magnesium has 2 electrons. Therefore, there is more attraction abetween the nucleus and electrons in magnesium than that of sodium.Therefore, sodium is more reactive than magnesium chloride because of lower ionization energy.
For more details on sodium reactivity, check the link below.
https://brainly.com/question/6837593
A diprotic acid (H2X) titrated with a solution of NaOH for 25 ml of the acid 87.42 ml of a 1.95 M solution of NaOH was required to reach the equivalent point, the concentration of the diprotic acid equals
0.14
6.8
3.4
0.29
The concentration of the diprotic acid equals 3.4 M
We'll begin by writing the balanced equation for the reaction.
H₂X + 2NaOH —> Na₂X + 2H₂O
From the balanced equation above,
The mole ratio of the acid, H₂X (nA) = 1The mole ratio of the base, NaOH (nB) = 2From the question given above, the following data were obtained:
Volume of acid, H₂X (Va) = 25 mLVolume of base, NaOH (Vb) = 87.42 mLMolarity of base, Ca(OH)₂ (Mb) = 1.95 MMolarity of acid, H₂X (Ma) =?MaVa / MbVb = nA/nB
(Ma × 25) / (1.95 × 87.42) = 1/2
(Ma × 25) / 170.469 = 1/2
Cross multiply
Ma × 25 × 2 = 170.469
Ma × 50 = 170.469
Divide both side by 50
Ma = 170.469 / 50
Ma = 3.4 M
Therefore, the concentration of the acid, H₂X is 3.4 M
Learn more about titration:
https://brainly.com/question/25624144
If substances B and C are both in the gas phase and are at the same energy level, which of the two substances will need to have more energy transferred out in order to change to the liquid phase? Substance B or Substance C? Explain your answer below.
For Science
Answer:
Substances can change phase—often because of a temperature change. At low temperatures, most substances are solid; as the temperature increases, they become liquid; at higher temperatures still, they become gaseous.
The process of a solid becoming a liquid is called melting. (an older term that you may see sometimes is fusion). The opposite process, a liquid becoming a solid, is called solidification. For any pure substance, the temperature at which melting occurs—known as the melting point—is a characteristic of that substance. It requires energy for a solid to melt into a liquid. Every pure substance has a certain amount of energy it needs to change from a solid to a liquid. This amount is called the enthalpy of fusion (or heat of fusion) of the substance, represented as ΔHfus. Some ΔHfus values are listed in Table 10.2 “Enthalpies of Fusion for Various Substances”; it is assumed that these values are for the melting point of the substance. Note that the unit of ΔHfus is kilojoules per mole, so we need to know the quantity of material to know how much energy is involved. The ΔHfus is always tabulated as a positive number. However, it can be used for both the melting and the solidification processes as long as you keep in mind that melting is always endothermic (so ΔH will be positive), while solidification is always exothermic (so ΔH will be negative).
Which of the following is the strongest covalent bond?
Single bond
Double bond
Triple bond
Hydrogen bond
Answer:
Triple bond is the strongest bond
Triple bonds are stronger than the equivalent single bonds or double bonds, with a bond order of three.
Answer:
single bond.In a single covalent bond, when the electrons are shared between two s orbitals, the resulting bond is a sigma (σ) bond . Sigma bonds are the strongest covalent chemical bonds....!!
how do i set up an electron configuration
Answer:
Electron configuration can be carried out in two steps which can be:
Sublevel notation
Shell notations.
In the sublevel notation, the sequence of filling electrons into the orbitals of the sublevels are guided by some principles:
the maximum number of electrons in the orbital of sublevels are two for s-sublevel, six for p-sublevel, ten for d-sublevel and fourteen for f-sublevel. This indicates that the maximum number of electrons in an orbital is two.
Aufbau's prinicple states that sublevel with lower energies are filled up before those with higher energies.
Pauli exclusion principle states that no two electrons in an atom can have the same set of the four quantum numbers.
Hund's rule states that electrons go into degenerate orbitals singly first before pairing occurs.
Using the shell notation, numbers are used to denote the sum of electrons in all orbitals each energy level.
For an atom of Be:
Sublevel notation for the 4 electrons 1s²2s²
Shell notation 2,2
Other representation is using the electron dot structure.
A compound has a molar mass of 163.59 g/mol. If you have 736.155 grams of this compound, how many moles do you have?
Answer:
4.50000 moles
Explanation:
This is dimensional analysis. If there is 163.59 grams in 1 mole of this compound then the converse is true: in 1 mole of this compound there is 163.59 grams --> 1 mol/163.59 grams.
Now that you have your conversion factor:
736.155 grams * (1 mol/163.59 grams) is your equation.
When you multiply these together, grams cancel and you end up with the desired mole-based answer:
4.50000 moles (The extra zeros are to make up for the 6 significant figures in 736.155, feel free to omit them if necessary.)
(pls give brainliest if this helped)
when an acid and alkali react to form water and salt
Answer:
Neutralisation involves an acid reacting with a base or an alkali, forming a salt and water.
Which statement correctly defines dynamic equilibrium?
At dynamic equilibrium, the rates of forward and reverse reactions are equal.
At dynamic equilibrium, the rate of the forward reaction is higher than the rate of the reverse reaction.
At dynamic equilibrium, the forward and reverse reactions stop.
At dynamic equilibrium, the concentrations of reactants and products are equal.
Answer: at dynamic equilibrium, the rates of forward and reverse reactions are equal.
Explanation:
The correct statement defines dynamic equilibrium "at dynamic equilibrium, the rates of forward and reverse reactions are equal."
What is dynamic equilibrium?The state of a particular system wherein the reversible reaction takes place ceases modifying the ratio of reactants as well as products, but there is still a transfer of substances among the reactants and products is known as dynamic equilibrium.
What is reactions?Chemical reaction can be defined as the a method for creating novel chemicals with unique features.
The correct statement defines dynamic equilibrium "at dynamic equilibrium, the rates of forward and reverse reactions are equal."
Therefore, the correct answer will be option (a).
To know more about reaction and dynamic equilibrium
https://brainly.com/question/2363073
#SPJ2
When Brian first sorted out his thoughts, he figured this was the first day after the crash and what did he think would happen next?
It should be noted that when Brian first sorted out his thoughts, the first thing that he thought would happen next is that he would probably be rescued that day.
It should be noted that in Chapter 5 of Hatchet, Brian wakes up in the forest and then, he realized that he was desperately thirsty.
When Brian first sorted out his thoughts, he figured this was the first day after the crash and that he would probably be rescued that day. He believed that he was going to wither up and die if he doesn't get anything that he'll drink.
Learn more about excerpts on:
https://brainly.com/question/21400963
which properties are affected by temperature?
Answer:
Please give Brainliest!
Explanation:
Material properties are dependent on the temperature. The tensile strength, yield strength and modules of elasticity decrease with increasing temperature. It should be expected that fatigue properties are also affected by the temperature.
How do I convert the ones circled in red? Please explain how you did it don’t just do it for me.
Answer:
25 centigrams is equal to 2.5 grams.
150 hectometers are 10,000 centimeters.
Explanation:
10 centigrams is equal to 0.1 gram.
25 / 10 = 2.5
1 hectometer is equal to 10,000 centimeters.
150 x 10,0000 = 1500000
NEED HELP ASAP PLZZZ
Answer:
Im pretty sure the answer is A. An electron moves from the FIFTH energy level down to the SECOND energy level.
Explanation:
when an atom in an excited state returns to its ground state it
Answer:
Inside the Atom
Just like bricks are the building blocks of a home, atoms are the building blocks of matter. Matter is anything that has mass and takes up space (volume). All matter is made up of atoms. The atom has a nucleus, which contains particles of positive charge (protons) and particles of neutral charge (neutrons). Surrounding the nucleus of an atom are shells of electrons - small negatively charged particles. These shells are actually different energy levels and within the energy levels, the electrons orbit the nucleus of the atom.
