Answer:
Explanation:
One day I was sitting on a leaf, in the early morning if a Tuesday, and I was just relaxing there. I then heard Bob( the water molecule next to me) say that he heard it was going to get pretty hot today. As the day went on I started to get pretty warm and I starting to evaporate and fly into the sky! It was really weird to see the world from up high. I stayed up there bouncing between clouds with Bob for a few hours, until the wind started to pick up and it got colder. I then started to shiver and began condensing with the other water molecules (and Bob). As it got colder we began to plummet to the earth really fast in the precipitate form of a water droplet. We hit the ground with a big ker-plop! I looked around me and we weren't the only ones. A bunch of other droplets had started to collect and form a puddle.
Hope this helps!
If 12.7 grams of hydrogen reacted with an unknown amount of oxygen, how many grams of water would be produced? (Write a balanced equation and show your work under the equation)
Answer:
2H2 + 1 O2 ------> 2H2O
m = 12.7g m = ?
Get the number of moles for Hydrogen gas (H2) by dividing the mass by the molar mass (1.01g/mol as listed in the periodic table for its atomic mass)
12.7/1.01 = 12.57 mol of H2
Now use the mole to mole ratio of Hydrogen gas (H2) and water (H2O).
From the balanced equation, we can see that 2 mol of H2 gives us 2 mol of H2O. Since both of the ratios are equal (2:2), the moles we have for hydrogen gas is the same as the moles we get for water.
12.57 mol of H2O
Now that we have the amount of mol for H2O produced in this reaction, we can convert it to grams by multiplying the moles by the molar mass.
Molar mass of H2O = (1.01 x 2) + (16) = 18.02g/mol
12.57 x 18.02 = 226.5g (rounded)
Therefore 226.5g of water will be produced in this reaction
According to law of conservation of mass and stoichiometry, 114.3 g of water are produced if 12.7 grams of hydrogen reacted with an unknown amount of oxygen.
What is law of conservation of mass?According to law of conservation of mass, it is evident that mass is neither created nor destroyed rather it is restored at the end of a chemical reaction .
Law of conservation of mass and energy are related as mass and energy are directly proportional which is indicated by the equation E=mc².Concept of conservation of mass is widely used in field of chemistry, fluid dynamics.
2 H₂ + O₂[tex]\rightarrow[/tex] 2 H₂O,according to this equation,4 g hydrogen reacts with 32 g oxygen to give 36 g water, thus 12.7 g of hydrogen will produce 12.7×36/4=114.3 g water and hence for this amount of water to be formed 12.7 g of hydrogen reacts with 101.6 g of oxygen which is obtained as 114.3-12.7=101.6 g
Thus, 114.3 g of water is produced.
Learn more about law of conservation of mass,here:
https://brainly.com/question/28711001
#SPJ2
the boiling point of water at standard pressure is
Answer:
100 Celsius mostly because water boils at sea level
How is a chemical equation different from mathematical equation?
Only chemical equation uses + sign
Only chemical equation uses arrow instead of = sign
Only chemical equation has numbers
Only chemical equation has minuses
Answer:
Only chemical equation uses arrow instead of = sign
Answer:
Only chemical equation uses an arrow instead of a = sign.
A chemical equation depicts a chemical reaction by utilising chemical formulae and symbols to depict the reactants, products, and chemical changes that take place. In a chemical equation, the arrow indicates the direction of the reaction and is commonly depicted as a single arrow pointing from the reactants to the products. In contrast, the equals sign (=) is commonly used in mathematical equations to indicate that two expressions have the same value.
While numbers are used to indicate the relative proportions of reactants and products and minus signs are used to indicate reactants or products in the form of ions, the arrow is the most distinguishing feature that distinguishes chemical equations from mathematical equations.
Do solar panels use electrical energy or produce electrical?
Answer:
How Does a Solar Panel Generate Power? Solar panels use the photons produced by sunlight to generate direct current (DC) electricity. When the photons hit the panel they are absorbed by the panel's semiconducting silicon material.
Explanation:
Answer:
Solar panels produce electrical energy by absorbing the solar energy from the sun and converting it into electrical energy.
Explanation:
I’m in science class right now and I need help on these questions
Answer:
hello
Explanation:
2. Which substance will form a solution with water? (Select all that app
string
sand
sugar
salt
Answer:
sugar and salt, as they can dissolve in water. Sugar and salt have a high solubility in water. So, sugar and salt can form a solution with water.
Explanation:
PC13 ionic or covalent
Answer:
The bond between Phosphorus and Chlorine in PCl3 is covalent as chlorine needs one electron and phosphorus has metallic character and easily donate electron
What is Jupiter’s strength of gravity?
Which of the following is the correct way to do it for 3753 Scientific notation
Answer:
b
Explanation:
it is b because it has 4 spots and that would be 3 zeros so it is to the 3rd power
Why does a light bulb turn in When you flip the switch to on?
Explanation:
Flipping a light switch to turn on a light means that the circuit with the light is being closed. When the switch is flipped the opposite way, to turn the light off, the circuit is being opened.
Answer:
You now have an open circuit
Explanation:
The circuit is closed when the switch is flipped the other way to turn off the light.
pls some one help
1 mark question
Answer:
The atomic number of Chlorine(Cl) is 17 and the electronic configuration is 2,8,7 with seven electrons in the valence shell.
Hope that helps. x
Answer:
See below
Explanation:
Chlorine has 17 electrons in it's shell.
(See the attached file to get the idea of what subshell would be filled first).
The accommodations:
s = 2 electrons
p = 6 electrons
d = 10 electrons
f = 14 electrons
Now, the electronic configuration of chlorine:
1s²2s²2p⁶3s²3p⁵
(2+2+6+2+5 = 17 electrons)
[tex]\rule[225]{225}{2}[/tex]
Hope this helped!
~AH1807Please Help Will Mark Brainliest!!!
Liquid water can be separated into hydrogen gas and oxygen gas through electrolysis. 1 mole of hydrogen gas and 0.5 moles of oxygen gas is produced from 1 mole of liquid water collected in separate 10 L containers at 1 atm. Will the temperatures of the gases be equal? In one to two sentences, use the ideal gas law to explain your answer. (20 points)
Answer:
The ideal gas law specifies the mechanical behavior of ideal gases. It is capable of calculating the volume of gases produced or consumed.
In chemical equations, these equations are widely used to convert between volumes and molar quantities.
Use ideal gas law
Therefore
is the same for both So, = same for both.
When n increases, T decreases, so, n is 1 for and 0.5 for , implying that is hotter.
The temperatures of the gases will not be equal.
The ideal gas law specifies the mechanical behavior of ideal gases. It is capable of calculating the volume of gases produced or consumed. In chemical equations, this equation is widely used to convert between volumes and molar quantities. The ideal gas law states that the pressure, temperature, and volume of gas are related to each other[tex]PV=nRT[/tex]
∵V is the same for both
∴T= same for both.
When n increases, T decreases, so, n is 1 for hydrogen gas and 0.5 for oxygen gas ,implying that oxygen gas will have more temperature than hydrogen gas since its number of moles are lower than hydrogen gas.
Learn more:
brainly.com/question/1063475
please help quickly
Rubia was given a type of inclined plane called a ramp in her science class. Her teacher told her that the ramp should have a mechanical advantage of 3.
Rubia pulled a block up the ramp, but afterward she calculated that the mechanical advantage of the ramp was 2.8 instead of 3. Her teacher said she did not make a mistake. What did Rubia calculate?
A.
the actual operating power of the ramp
B.
the actual mechanical advantage of the ramp
C.
the ideal mechanical advantage of the ramp
D.
the ideal operating power of the ramp
Answer: B. The actual mechanical advantage of the ramp.
Explanation:
The professor saying that the ramp SHOULD have a mechanical advantage of 3 indicates that that would be the ideal mechanical advantage. Since Rubia calculated it to be 2.8, that means that it is the acutal mechanical advantage. The actual advantage will be reduced from the ieal due to things like friction.
What is the volume, in liters, of 1.4 moles of CO2 gas at STP?
Answer:
22.4 L.
Explanation:
the bradford assay only works at low protein concentrations
Answer:
Dilute the sample
Explanation:
The statement is not entirely accurate. The Bradford assay is commonly used to determine protein concentrations in a sample.
However, it is true that the Bradford assay is more accurate and reliable for measuring protein concentrations at low to moderate levels rather than at very high concentrations.
The Bradford assay is based on the binding of Coomassie Brilliant Blue dye to proteins. The dye undergoes a color change from brown to blue when bound to proteins, allowing for the measurement of protein concentrations. At low protein concentrations, the binding of the dye to proteins is well-calibrated and results in a linear relationship between protein concentration and color intensity, making it suitable for accurate quantification.
At high protein concentrations, the binding capacity of the dye may become saturated, leading to non-linear and less accurate measurements. The excess protein can also cause interference and affect color development. In such cases, dilution or alternative protein quantification methods may be more suitable, such as the BCA assay or the Lowry assay.
Therefore, while the Bradford assay can be used to measure protein concentrations across a range of concentrations, it is generally more reliable for low to moderate protein concentrations.
Learn more about proteins here:
https://brainly.com/question/30986280
#SPJ 6
the valence electrons of metals jump easily to a higher energy orbital when light shines on them then they all fall emiting the excess energy as light which property of metals is explained by this?
Answer:
Lustrous
Explanation:
Metals are lustrous which gives them a property of having Shiny surfaces
The valence electrons of metals jump easily to a higher energy orbital when light shines on them then they all fall emitting the excess energy as light show lustrous property of metals.
What are valence electrons?Valence electrons are defined as a negatively charged particle that can be shared or transmitted between atoms that is found in the outermost shell of an atom. Valence electrons have a crucial role in determining how an atom will behave. The electrical configurations of elements can be used to find valence electrons. The total number of valence electrons in that element is then determined by counting the number of electrons in the outermost shell.
When newly treated, polished, or broken, a material takes on a bright look and conducts electricity and heat reasonably well. Metals are typically ductile and malleable. These traits are the result of the metallic bond that connects the atoms or molecules of the metal.
Thus, the valence electrons of metals jump easily to a higher energy orbital when light shines on them then they all fall emitting the excess energy as light show lustrous property of metals.
To learn more about valence electrons, refer to the link below:
https://brainly.com/question/13993867
#SPJ2
Please Help! (Will mark brainliest)
How many chlorine atoms are in 4 moles of chlorine?
A sample of acetaminophen has 100,000 molecules in it.
Answer:
2.409*10^24
Explanation:
If I am not mistaken you are supposed to do 4*6.022*10^23. This will allow for it to be converted.
I hope this helped
OSSIBLES2
Mulchem with what would happen we have
Langs
Besi
III
Sko
Het
* Vedhere very little proteson against uyiri, Senal amage, ara pathogens the viruses are busers
35 Wd be able to be one to our body and remove carbon diote on our biker
45 Wd be able to gicky react to save ourselves from daneous stations
3 Wed he wable to crostate and deliver orygen ad carbon dioxide throughout our body
1
2
2
4
5
Next >
How many grams of potassium sulphate are formed when 49g of sulphuric acid in solution are neutralised by potassium hydroxide?
NO LINKS!!!
Static electricity is a ____ charge.
A. permanent
B. missing
C. flowing
D. temporary
Which molecule has ionic bond?
Mg
C0
NaCl
N0
NaCl - Chlorine has an outer shell with 7 electrons it wants to gain from the Sodium to become stable, whereas the Sodium wants to lose an electron to become stable.
explain the concept of thekinetic molecular theory
Answer:
Kinetic Molecular Theory states that gas particles are in constant motion and exhibit perfectly elastic collisions. Kinetic Molecular Theory can be used to explain both Charles' and Boyle's Laws. The average kinetic energy of a collection of gas particles is directly proportional to absolute temperature only.
Explanation:
hope this helps! goodluck & enjoy the rest of ur day or night.
which of the following pairs of molecules can form hydrogen bonds between them? group of answer choices ch3oh and nh3 hcl and hi ch4 and h2o fo2 and ch2o h2 and o2
Answer:
Hydrogen Bond is the force that exists when H is directly connected to F, O, or N. HCl and HI cannot form hydrogen bonds between them. CH3OH and NH3 can form hydrogen bonds between them. CH4 and H2O cannot form hydrogen bonds between them.
Explanation:
the sun`s blank is the layer that emits visible light
Answer: photosphere.
Explanation:
The part of the Sun commonly called its surface is the photosphere. The word photosphere means "light sphere" – which is apt because this is the layer that emits the most visible light. It’s what we see from Earth with our eyes.
A student makes an aqueous solution of sodium hydroxide. Which statement correctly identifies the two ions present in the solute of this mixture?
The sodium ion is negative, and the hydroxide ion is positive.
The sodium ion is positive, and the hydroxide ion is positive.
The sodium ion is positive, and the hydroxide ion is negative.
The sodium ion is neutral, and the hydroxide ion is neutral
The two ions present in the solution are:
1. Sodium ion, Na⁺
2. Hydroxide ion, OH¯
The correct answer to the question is the 3rd option. The sodium ion is positive, and the hydroxide ion is negative.
Ions are atoms or group of atoms which possess an electric charge.
Aqueous Sodium hydroxide, NaOH contains sodium ion and hydroxide ion.
The sodium ion is positive while the hydroxide ion is negative as illustrated below:
NaOH(aq) —> Na⁺(aq) + OH¯(aq)
From the illustration above, we can conclude that the correct answer to the question is the 3rd option. The sodium ion is positive, and the hydroxide ion is negative.
Please see attached photo for further details
Learn more: https://brainly.com/question/4414335
I need help with stoichiometry
In the following experiment, a coffee-cup calorimeter containing 100mL OF H2O is used.
Please provide more of the question so I am able to answer, but I do know that H20 has 0 calories.
Two samples of carbon come into contact. A heat transfer will occur between sample A and sample B. What must be true for heat to transfer from sample A to sample B
Polyester is a synthetic material used for many different purposes. It is produced from petroleum and natural gas. Producing polyester from these natural resources requires many steps and uses other chemicals that are potentially harmful. Polyester production also requires a lot of energy. Although polyester is not biodegradable, it is easily recyclable.
Which statement about synthetic materials is best supported by the example of polyester?
A.
Using synthetic materials has a negative impact on the environment, but using natural materials does not.
B.
Synthetic materials created from petroleum and natural gas are difficult to produce and to recycle.
C.
Materials that are created from natural resources affect the environment more than those that are not.
D.
Producing certain synthetic materials could have a greater environmental impact than disposing of them.
Answer:
A. Producing certain synthetic materials could have a greater environmental impact than disposing of them.
Explanation
I just did this question and got it right.
give free 18 points again just answer yes or no
is einstein a scientist? yes or no
Answer:
yes
Explanation:
Answer:
Yes
Explanation:
Albert Einstein is often cited as one of the most influential scientists of the 20th century. His work continues to help astronomers study everything from gravitational waves to Mercury's orbit
