Listed below are the overhead widths​ (in cm) of seals measured from photographs and the weights​ (in kg) of the seals. Construct a​ scatterplot, find the value of the linear correlation coefficient​ r, and find the critical values of r using α=0.01. Is there sufficient evidence to conclude that there is a linear correlation between overhead widths of seals from photographs and the weights of the​ seals?

Answers:

===========================================

Explanation:

Side MO is twice as long as the midsegment XY. Note how XY and MO are parallel.

This makes

MO = 2*XY = 2*10 = 20

Side MO breaks into two equal halves MZ and ZO

Each of MZ and ZO are 20/2 = 10 units long.

Put another way: XY, MZ and ZO are all the same length (all 10 units long).

---------------

The diagram shows that segment NO is 18 units long, which cuts in half to 18/2 = 9. This is the length of NY, YO and XZ

Also, MN = 14 which cuts in half to 7. This means MX, XN and YZ are all 7 units each.

Answer:

Step-by-step explanation:

8/5 = 16/10 = 24/15

8:5 = 16:10 = 24:15

Answer:

a) 22.4 pounds.

b) 0.17 pounds.

c) 0.0127 = 1.27% approximate probability the sample mean weight will be less than 22.02.

d) c = 22.62

Step-by-step explanation:

To solve this question, we need to understand the normal probability distribution and the central limit theorem.

Normal Probability Distribution

Problems of normal distributions can be solved using the z-score formula.

In a set with mean [tex]\mu[/tex] and standard deviation [tex]\sigma[/tex], the z-score of a measure X is given by:

[tex]Z = \frac{X - \mu}{\sigma}[/tex]

The Z-score measures how many standard deviations the measure is from the mean. After finding the Z-score, we look at the z-score table and find the p-value associated with this z-score. This p-value is the probability that the value of the measure is smaller than X, that is, the percentile of X. Subtracting 1 by the p-value, we get the probability that the value of the measure is greater than X.

Central Limit Theorem

The Central Limit Theorem establishes that, for a normally distributed random variable X, with mean [tex]\mu[/tex] and standard deviation [tex]\sigma[/tex], the sampling distribution of the sample means with size n can be approximated to a normal distribution with mean [tex]\mu[/tex] and standard deviation [tex]s = \frac{\sigma}{\sqrt{n}}[/tex].

For a skewed variable, the Central Limit Theorem can also be applied, as long as n is at least 30.

Average 22.4 pounds with a standard deviation of 1.36 pounds.

This means that [tex]\mu = 22.4, \sigma = 1.36[/tex]

Consider the sample mean weight of 64 watermelons of this variety.

This means that [tex]n = 64, s = \frac{1.36}{\sqrt{64}} = 0.17[/tex]

a. What is the expected value of the sample mean weight?

By the Central Limit Theorem, 22.4 pounds.

b. What is the standard deviation of the sample mean weight?

By the Central Limit Theorem, 0.17 pounds.

c. What is the approximate probability the sample mean weight will be less than 22.02?

This is the p-value of Z when X = 22.02. So

[tex]Z = \frac{X - \mu}{\sigma}[/tex]

By the Central Limit Theorem

[tex]Z = \frac{X - \mu}{s}[/tex]

[tex]Z = \frac{22.02 - 22.4}{0.17}[/tex]

[tex]Z = -2.235[/tex]

[tex]Z = -2.235[/tex] has a p-value of 0.0127.

0.0127 = 1.27% approximate probability the sample mean weight will be less than 22.02.

d. What is the value c such that the approximate probability the sample mean will be less than c is 0.9?

This is the 90th percentile, that is, [tex]X = c[/tex] when z has a p-value of 0.9, so X when Z = 1.28.

[tex]Z = \frac{X - \mu}{s}[/tex]

[tex]1.28 = \frac{c - 22.4}{0.17}[/tex]

[tex]c - 22.4 = 1.28*0.17[/tex]

[tex]c = 22.62[/tex]

Answer:

A, B, and E.

Step-by-step explanation:

A. 5^x * 5^x

= 5^x+x

=5^(2)(x)

=25^x

B. 5^2x

=5^(2)(x)

=25^x

C. 5*5^2x

=5^1+2x

D. 5*5^x

=5^1+x

E. (5*5)^x

=5^x*5^x

=5^(2)(x)

=25^x

F. 5^2*5^x

=5^2+x

Answer:

D

Step-by-step explanation:

I explained why 5 minutes ago on a different question

Explanation:

The first figure has 2 blocks.

The second figure has 4 blocks.

The third figure has 8 blocks

The pattern 2,4,8,... follows the rule "double the current value to get the next one". Because we have this going on, we have an exponential pattern here.

A linear pattern would be something like 2,4,6,8,10,... showing that we add on 2 each time, rather than multiply by 2 each time. So as you can guess, or already know, exponential patterns grow much quicker compared to linear ones.

Step-by-step explanation:

here is the answer to your question

Answer:

Step-by-step explanation:

Is the function f(x) = 3x+1, f(x) = 3ˣ⁺¹, or f(x) = 3ˣ+1 ?

f(x) = 3x+1 is not an exponential function. It is a straight line.

f(x) = 3ˣ⁺¹ Is an exponential function. The base is 3.

f(x) = 3ˣ+1 is an exponential function. The base is 3.

The actual labor cost is $600 over the targeted labor cost.

Given that,

Work done by each person per week = 40 hours

Required labor hours per week = 600 hours

No. of workers in the team = 13

To find,

Actual weekly labor cost = ?

Procedure:

Actual weekly labor cost = No. of workers * no. of hours performed by them

[tex]= 13 * 40[/tex]

[tex]= 520 hours[/tex]

Given that,

[tex]Regular rate = $ 15.00 per hour[/tex]

[tex]Overtime rate = $ 22.50 per hour[/tex]

Thus,

Actual labor cost = (regular hours worked * regular rate) + (overtime * overtime rate)

[tex]= (520 * 15) + ([600 - 520] * 22.50)[/tex]

[tex]= $ 7,800 + $ 1,800[/tex]

[tex]= $ 9600[/tex]

Targeted Labor cost = $ 9,000 per week

Thus, option C i.e. the actual labor cost is $ 600 over the targeted labor cost.

Learn more about 'Labor Cost' here:

brainly.com/question/5427701

GIVEN -> Triangles r similar

so sides r in ratio

[tex] \frac{2.4}{3} = \frac{2.8}{x} \\ 0.8 = \frac{2.8}{x} \\ x = \frac{2.8}{0.8} \\ x = \frac{28}{8} \\ x = 3.5 \: \: ans[/tex]

Answer:

3.5

Step-by-step explanation:

We can write a ratio to solve

2.4      2.8

----- = --------

3         x

Using cross products

2.4x = 3(2.8)

2.4x =8.4

Divide each side by 2.4

2.4x /2.4 = 8.4/2.4

x = 3.5

Note: you may need to delete the comma

============================================================

Explanation:

The info "5 months" is never used to compute the mean. We could easily replace it with "6 months" or "7 months" or any stretch of time, and still get the same answer. So we'll ignore this value.

What we'll do is add up the 21 items given to us, and then divide by 21.

Because there are so many values, and it's easy to get lost, I'm going to add up across the rows

Those subtotals then add up to this

1,499,116+1,586,126+1,591,076+842,147 = 5,518,465

This is the same as adding up all 21 values.

Finally, we divide that sum over 21 as there are 21 values in this list

(5,518,465)/21 = 262,784.047619048

That value then rounds up to 262,785

If your teacher just wanted things to the nearest whole number (without rounding up), then the answer would be 262,784

Side note: using a spreadsheet program would probably be the most efficient/fastest method for this type of problem.

Answer:

a) The 95% confidence interval for the mean mpg, for the certain model of car is (23.3, 30.1). This means that we are 95% sure that the true mean mpg of the model of the car is between 23.3 mpg and 30.1 mpg.

b) Increasing the confidence level, the value of T would increase, thus increasing the margin of error and making the interval wider.

c) 37 cars would have to be sampled.

Step-by-step explanation:

Question a:

We have the sample standard deviation, and thus, the t-distribution is used to solve this question.

The first step to solve this problem is finding how many degrees of freedom, we have. This is the sample size subtracted by 1. So

df = 15 - 1 = 14

95% confidence interval

Now, we have to find a value of T, which is found looking at the t table, with 14 degrees of freedom(y-axis) and a confidence level of [tex]1 - \frac{1 - 0.95}{2} = 0.975[/tex]. So we have T = 2.1448

The margin of error is:

[tex]M = T\frac{s}{\sqrt{n}} = 2.1448\frac{6.2}{\sqrt{15}} = 3.4[/tex]

In which s is the standard deviation of the sample and n is the size of the sample.

The lower end of the interval is the sample mean subtracted by M. So it is 26.7 - 3.4 = 23.3 mpg.

The upper end of the interval is the sample mean added to M. So it is 26.7 + 3.4 = 30.1 mpg.

The 95% confidence interval for the mean mpg, for the certain model of car is (23.3, 30.1). This means that we are 95% sure that the true mean mpg of the model of the car is between 23.3 mpg and 30.1 mpg.

b. What would happen to the interval if you increased the confidence level from 95% to 99%? Explain

Increasing the confidence level, the value of T would increase, thus increasing the margin of error and making the interval wider.

c. The lead engineer is not happy with the interval you constructed and would like to keep the width of the whole interval to be less than 4 mpg wide. How many cars would you have to sample to create the interval the engineer is requesting?

Width is twice the margin of error, so a margin of error of 2 would be need. To solve this, we have to consider the population standard deviation as [tex]\sigma = 6.2[/tex], and then use the z-distribution.

We have that to find our [tex]\alpha[/tex] level, that is the subtraction of 1 by the confidence interval divided by 2. So:

[tex]\alpha = \frac{1 - 0.95}{2} = 0.025[/tex]

Now, we have to find z in the Z-table as such z has a p-value of [tex]1 - \alpha[/tex].

That is z with a pvalue of [tex]1 - 0.025 = 0.975[/tex], so Z = 1.96.

Now, find the margin of error M as such

[tex]M = z\frac{\sigma}{\sqrt{n}}[/tex]

In which [tex]\sigma[/tex] is the standard deviation of the population and n is the size of the sample.

How many cars would you have to sample to create the interval the engineer is requesting?

This is n for which M = 2. So

[tex]M = z\frac{\sigma}{\sqrt{n}}[/tex]

[tex]2 = 1.96\frac{6.2}{\sqrt{n}}[/tex]

[tex]2\sqrt{n} = 1.96*6.2[/tex]

[tex]\sqrt{n} = \frac{1.96*6.2}{2}[/tex]

[tex](\sqrt{n})^2 = (\frac{1.96*6.2}{2})^2[/tex]

[tex]n = 36.9[/tex]

Rounding up:

37 cars would have to be sampled.

Answer:

The minimum number of drivers you would need to survey is 601.

Step-by-step explanation:

In a sample with a number n of people surveyed with a probability of a success of [tex]\pi[/tex], and a confidence level of [tex]1-\alpha[/tex], we have the following confidence interval of proportions.

[tex]\pi \pm z\sqrt{\frac{\pi(1-\pi)}{n}}[/tex]

In which

z is the z-score that has a p-value of [tex]1 - \frac{\alpha}{2}[/tex].

The margin of error is:

[tex]M = z\sqrt{\frac{\pi(1-\pi)}{n}}[/tex]

95% confidence level

So [tex]\alpha = 0.05[/tex], z is the value of Z that has a p-value of [tex]1 - \frac{0.05}{2} = 0.975[/tex], so [tex]Z = 1.96[/tex].  

What is the minimum number of drivers you would need to survey to be 95% confident that the population proportion is estimated to within 0.04?

The number is n for which M = 0.04.

We don't have an estimate for the proportion, so we use [tex]\pi = 0.5[/tex]. Then

[tex]M = z\sqrt{\frac{\pi(1-\pi)}{n}}[/tex]

[tex]0.04 = 1.96\sqrt{\frac{0.5*0.5}{n}}[/tex]

[tex]0.04\sqrt{n} = 1.96*0.5[/tex]

[tex]\sqrt{n} = \frac{1.96*0.5}{0.04}[/tex]

[tex](\sqrt{n})^2 = (\frac{1.96*0.5}{0.04})^2[/tex]

[tex]n = 600.25[/tex]

Rounding up:

The minimum number of drivers you would need to survey is 601.

Answer:

29.1 Is the answer for 2009

Step-by-step explanation:

Answer:

Answer:

x = 6

z = 60

Step-by-step explanation:

Solve for x

(6x + 84) = 120

     -  84     -84

6x = 36

6x/6 = 36/6

x = 6

Then solve for z

120 + z = 180

-120        -120

z = 60

Answer:

[tex]55385[/tex]

words

Step-by-step explanation:

because

I) we have given 55 words

ii) we have given a time 20 seconds

iii) then we multiple 55 ×1007

iv) the answer will be 55385

36 different value meal packages are possible

Step-by-step explanation:

To answer this question, multiply all given numbers together.

4*3*3

12*3

36

Subtract the difference form the total:

717 - 67 = 650

Divide the remaining amount by 2:

650/2 = 375

The bench cost$375

Answer:

I can say for sure that the answer is not segment GH ≅ segment FH because the tangents that create the segment FG share a common endpoint.  I believe the answer is segment GH ≅ segment FH because arc EF ≅ arc GF.

Step-by-step explanation:

Again, I'm not sure about the correct answer but I know for sure it isn't segment GH ≅ segment FH because the tangents that create the segment FG share a common endpoint.  

The segment GH and the segment FH are equal to each other because the line AH is coming from the center of the circle and is bisecting the line GF.

The circumcenter of a triangle can be constructed by drawing any two of the three perpendicular bisectors. For three non-collinear points, these two lines cannot be parallel, and the circumcenter is the point where they cross.

Any point on the bisector is equidistant from the two points that it bisects, from which it follows that this point, on both bisectors, is equidistant from all three triangle vertices

Hence the segment GH and the segment FH are equal to each other because the line AH is coming from the center of the circle and is bisecting the line GF.

To know more about a Circumscibed circle follow

https://brainly.com/question/2699432

Answer:

a)

[tex]|z| < 2.054[/tex]: Do not reject the null hypothesis.

[tex]|z| > 2.054[/tex]: Reject the null hypothesis.

b) [tex]z = 2.81[/tex]

c) Reject.

d) The p-value is 0.005.

Step-by-step explanation:

Before testing the hypothesis, we need to understand the central limit theorem and the subtraction of normal variables.

Central Limit Theorem

The Central Limit Theorem establishes that, for a normally distributed random variable X, with mean [tex]\mu[/tex] and standard deviation [tex]\sigma[/tex], the sampling distribution of the sample means with size n can be approximated to a normal distribution with mean [tex]\mu[/tex] and standard deviation [tex]s = \frac{\sigma}{\sqrt{n}}[/tex].

For a skewed variable, the Central Limit Theorem can also be applied, as long as n is at least 30.

Subtraction between normal variables:

When two normal variables are subtracted, the mean is the difference of the means, while the standard deviation is the square root of the sum of the variances.

Population 1:

Sample of 42, standard deviation of 3.3, mean of 101, so:

[tex]\mu_1 = 101[/tex]

[tex]s_1 = \frac{3.3}{\sqrt{42}} = 0.51[/tex]

Population 2:

Sample of 53, standard deviation of 3.6, mean of 99, so:

[tex]\mu_2 = 99[/tex]

[tex]s_2 = \frac{3.6}{\sqrt{53}} = 0.495[/tex]

H0 : μ1 = μ2

Can also be written as:

[tex]H_0: \mu_1 - \mu_2 = 0[/tex]

H1 : μ1 ≠ μ2

Can also be written as:

[tex]H_1: \mu_1 - \mu_2 \neq 0[/tex]

The test statistic is:

[tex]z = \frac{X - \mu}{s}[/tex]

In which X is the sample mean, [tex]\mu[/tex] is the value tested at the null hypothesis, and s is the standard error .

a. State the decision rule.

0.04 significance level.

Two-tailed test(test if the means are different), so between the 0 + (4/2) = 2nd and the 100 - (4/2) = 98th percentile of the z-distribution, and looking at the z-table, we get that:

[tex]|z| < 2.054[/tex]: Do not reject the null hypothesis.

[tex]|z| > 2.054[/tex]: Reject the null hypothesis.

b. Compute the value of the test statistic.

0 is tested at the null hypothesis:

This means that [tex]\mu = 0[/tex]

From the samples:

[tex]X = \mu_1 - \mu_2 = 101 - 99 = 2[/tex]

[tex]s = \sqrt{s_1^2 + s_2^2} = \sqrt{0.51^2 + 0.495^2} = 0.71[/tex]

Value of the test statistic:

[tex]z = \frac{X - \mu}{s}[/tex]

[tex]z = \frac{2 - 0}{0.71}[/tex]

[tex]z = 2.81[/tex]

c. What is your decision regarding H0?

[tex]|z| = 2.81 > 2.054[/tex], which means that the decision is to reject the null hypothesis.

d. What is the p-value?

Probability that the means differ by at least 2, either plus or minus, which is P(|z| > 2.81), which is 2 multiplied by the p-value of z = -2.81.

Looking at the z-table, z = -2.81 has a p-value of 0.0025.

2*0.0025 = 0.005

The p-value is 0.005.

Answer:

a) The sample mean is 1260 and the standard deviation is 48.

b) The 90% confidence interval for the mean of all tree-ring dates from this archaeological site is (1230, 1290).

Step-by-step explanation:

Question a:

Mean is the sum of all values divided by the number of values. So

[tex]\overline{x} = \frac{1285 + 1187 + 1222 + 1194 + 1268 + 1316 + 1275 + 1317 + 1275}{9} = 1260[/tex]

Standard deviation is the square root of the sum of the differences squared between each value and the mean, divided by the one less than the sample size. So

[tex]s = \sqrt{\frac{(1285-1260)^2 + (1187-1260)^2 + (1222-1260)^2 + (1194-1260)^2 + (1268-1260)^2 + ...}{8}} = 48[/tex]

The sample mean is 1260 and the standard deviation is 48.

Question b:

We have the standard deviation for the sample, which means that the t-distribution is used to solve this question.

The first step to solve this problem is finding how many degrees of freedom,which is the sample size subtracted by 1. So

df = 9 - 1 = 8

90% confidence interval

Now, we have to find a value of T, which is found looking at the t table, with 8 degrees of freedom(y-axis) and a confidence level of [tex]1 - \frac{1 - 0.9}{2} = 0.95[/tex]. So we have T = 1.8595

The margin of error is:

[tex]M = T\frac{s}{\sqrt{n}} = 1.8595\frac{48}{\sqrt{9}} = 30[/tex]

In which s is the standard deviation of the sample and n is the size of the sample.

The lower end of the interval is the sample mean subtracted by M. So it is 1260 - 30 = 1230

The upper end of the interval is the sample mean added to M. So it is 1260 + 30 = 1290

The 90% confidence interval for the mean of all tree-ring dates from this archaeological site is (1230, 1290).

Given:

d = 2

f = 4

To find:

Value of  [tex]\frac{14(7)-d}{2f}[/tex]

Steps:

we need to substitute and then find the value,

[tex]= \frac{14(7)-2}{2(4)}\\ \\=\frac{98-2}{8} \\\\=\frac{96}{8}\\\\=12[/tex]

Therefore, the answer is option C) 12

Happy to help :)

If you need help, feel free to ask

Answer:

5π/4 radians or 225°

Step-by-step explanation:

Answer:

y = 2x - 4

Step-by-step explanation:

The equations are put in slope intercept form

Slope intercept form: y = mx + b

Where m = slope and b = y intersect

So in order to find the equation of the data represented by the table we will have to find the slope and y intercept

Let's begin!

First let's find the slope

We can find the slope by using the slope formula

m = (y2 - y1) / (x2 - x1) where the x and y values are derived from coordinates from the table

The points chosen may vary but I have chosen the points (0,-4) and (1,-2)

Now that we have chosen the points we will use to find the slope let's define the variables

remember coordinates are written like this: (x,y)

The x value of the second coordinate is 1 so x2 = 1

The x value of the first coordinate is 0

So x1 = 0

The y value of the second coordinate is -2 so y2 = -2

The y value of the first coordinate is -4

So y1 = -4

Now that we have defined each variable let's plug in the values into the formula

Formula: m = (y2 - y1) / (x2 - x1)

Variables: x2 = 1, x1 = 0, y2 = -2, y1 = -4

Substitute values

m = (-2 - (-4) / ( 1 - 0 )

Evaluate

The negative signs cancel out on top and it changes to +4

m = (-2 + 4)/(1-0)

Add top values

m = 2/(1-0)

Subtract bottom numbers

m = 2/1

Simplify fraction

m = 2

So we can conclude that the slope (m) = 2

Now let's find the y intercept or "b"

The y intercept is the value of y when x = 0

If you look at the table when x = 0 y = -4 meaning that the y intercept or "b" is -4

Now that we have found everything let's find the equation of the data represented by the table

The equation is in slope intercept form

y = mx + b

Define variables

m = 2 and b = -4

Substitute values

y = 2x - 4

The equation is y = 2x - 4

Answer:

the scale factor is 3/4

x = 16×3/4 = 12

Step-by-step explanation:

the only side length we have for both triangles is the short left side.

we see that we get ED from SR and need to transform 4 into 3. how do we do that ?

well,

4×f = 3

f = 3/4

that is the scaling factor, as all side lengths in EDF are created by multiplying the corresponding side in SRT by the same scaling factor (3/4).

therefore,

x = EF = ST×f = 16×3/4 = 4×3 = 12

Answer:

The scale factor is 4/3 and x is 12

Step-by-step explanation:

→ Divide RS by DE

4 ÷ 3 = 4/3

→ Divide the answer by 16

16 ÷ 4/3 = 12

Answer:

25/26 or 26/27 depending on free hands.

The first is if you don't use jokers/free cards

There is 13 cards in a single set, and a single 10 card.

Two sets are black and two sets a red.

Hearts, Spades, Clubs, and Diamonds

There is only 2 black tens out of 52 or 54 cards, so we can set it up as

50/52 or 52/54 which is simplified to

25/26 or 26/27 depending on free hands.

Step-by-step explanation:

Answer:

0

Step-by-step explanation: