Answer:
1 Conditions that result in the emission of electrons from a conductor:
Heating the conductor to a suitable temperature
Exposing the conductor to a strong light
Subjecting the conductor to a very high applied voltage
Subjecting the conductor to high-speed electrons from another source
2 Both diodes and triodes influence current flow and contain electrodes. Diodes involve only two active pieces; triodes contain three electrodes within a tube. Current can flow through a diode in only one direction. Diodes tend to act as rectifiers. In a triode, the third electrode is a grid located between the cathode and the anode. A small difference of potential between the grid and the cathode controls the number of electrons that reach the anode. Adjusting the charge on the grid affects the number of electrons that can reach the anode. Triodes tend to act as amplifiers.
3 a Transmitting antenna
b Modulator
c Oscillator
d Microphone
4 a RF amplifier
b Receiving antenna
c Loudspeaker
d Demodulator
e Tuner
5 hue, saturation, intensity/brightness
6 red, blue, green
Explanation
PF right from PF all 6 answers
There are four main ways in which electrons are emitted from the conductor including Thermionic emission, Electric field electron emission, Photoelectric emission, and Secondary emission.
What is a conductor?A conductor is a substance or material which allows electricity to flow through it. In a conductor, the electrical charge carriers, usually electrons or ions or charged particles, move easily from one atom to another atom when the voltage is applied.
Thermionic emission involves large amount of external energy in the form of heat is supplied to release free electrons from the metal.
In the electric field electron emission, electrons are emitted from the metal surface when the metals are placed in a very strong electric field.
During photoelectric emission, light is absorbed by the metals and this provides energy to the valence electrons in the conductor which break their bond with the parent atom and which are then released from the atom.
Valence electrons have kinetic energy, however they don't have enough energy to escape from the atom. During secondary emission, a high-speed electron from the conductor is bombarded with an atom, which provides energy for the valence electrons to break their bonds with their parent atom which are then released from the atom.
Learn more about Conductors here:
https://brainly.com/question/18084972
#SPJ2
___ radars show everything in fhe sky from servere weather to birds and mosquitoes to tornado debris
Answers:
Polar
Dopper
Geostationary
Orbiting
Answer:
doppler
Explanation:
Can someone please answer this, ill give you brainliest Would be very appreciated.
Water cycle basically involves the change of water into liquid to vapour and again to liquid states through a cyclic manner .
The answers are
EvaporationTranspirationCondensationprecipitationrunoffseapageground waterWhat are challenges faced by both modern and ancient engineers?
Answer:
Climate Chrises
Explanation:
I need help with this ASAP!!
Answer:
C
Explanation:
High pitch due to high frequency b/c of doppler effect. The sound waves in front of the vehicle are being squashed together by the moving ambulance. This causes more vibrations to reach your ear per second.
Compare solar heating panels and solar electric panels.
pls I really need help
Answer:
We know that a solar electrical panel converts sunlight to electricity by means of solar cells and then, the electricity can be used as any electrical current.
I am not familiar with solar heating panels but assume that a liquid is heated by sunlight and then circulated thru the area that needs heating - it converts heat from sunlight to usable heat. The heat energy could also be stored and delivered at a different time (accumulated during the day and delivered at night). This is somewhat similar to a company freezing water at night when electricity is cheaper and then using the cooled water during the day for cooling.
Can someone please answer this, ill give you brainliest Would be very appreciated.
Answer:
True
Explanation:
The spheres of the Earth are : Biosphere, Hydrosphere, Geosphere, and AtmosphereWater travels through liquid form only (known as water itself) through 3 spheresIt travels through the atmosphere in gas form (vapor) or liquid form itself as rainAnswer:
True
Explanation:
The four spheres of atmosphere are
Hydrosphere BiosphereGeosphereAtmosphereWater begins its journey from hydrosphere then goes through atmosphere, biosphere and geosphere respectively
Please help me with those multiple choice
Answer:
11. Light waves are electromagnetic (created by electromagnetic impulse)
12. Light waves in a medium are slower V = C / Nm where Nm is the index of refraction of the medium
13. The frequency of the vibration remains the same
14. The wavelength of light in the medium is less
λ = V / f and it was determined in 12 that the velocity is less in the medium
200 N of force is applied to an object causing it to accelerate at 10 m/s^2. What is the mass of the object?
[tex]~~~~F=ma\\\\\implies m = \dfrac{F}a = \dfrac{200~ N}{10~ ms^{-2}} = 20~ \text{kg}\\\\\text{The mass of the object is 20 kg.}[/tex]
What is the acceleration of a 100 kg object pushed by Beau with a force of 500 N? Write out your equation.
Answer:
ProvideD :
Mass ( m ) = 100 kg , Force ( F ) = 500 NTo FinD :
Acceleration ( a )SolutioN :
We know , F = ma so put up the values and then solve for a[tex] \longrightarrow \tt \: 500 = 100a[/tex]
[tex] \longrightarrow \tt \: \frac{500}{100} = a[/tex]
[tex] \longrightarrow \tt \: a = \: \boxed { \tt{5 \: ms ^{ - 2} }}[/tex]
The acceleration produced is 5 ms ^ -2 .--------------- HappY LearninG <3 --------------
Calculate the frequency of a wave which goes through 10 cycles in 5 s
What is the ratio between the initial and final kinetic energies of a car, if its velocity is increased by four times?
1:8
1:7
1:16
Let initial velocity be v
So
initial kinetic energy
KE=1/2mv²Final velocity is four times v i.e 4v
Final kinetic energy
KE=1/2m(4v)²KE=1/2m(16v²)Find ratio
1/2m(16v²):1/2mv²16v²:v²16:1Or
1:16Option C
#BBH
12. A child touches the metal leg of a chair. She says "The
cold is moving to my hand!" How would you (gently) correct
the child in physics terms
A child touches the metal leg of a chair. The temperature of metal leg is moving to her hand.
What is temperature?The temperature is the degree of hotness or coldness when an object is touched.
The metals are generally have less temperature compared to the surrounding temperature. When a child touches the leg of a metal chair, she feel cold, but the physical term is temperature which is moved to her hand.
Thus, temperature of metal leg is moving to her hand.
Learn more about temperature.
https://brainly.com/question/11464844
#SPJ1
How long does it take to travel?
120 miles at 40mph
Answer:
it takes 3 hours to travel
Explanation:
120 ÷ 40 = 3
Step 1. distance = speed * time or time = distance/speed.
Step 2. time = 120 miles/(40 miles/hour) = 3 hours.
Step 3. ANSWER: It would take 3 hours to travel 120 miles at 40 mph.
All electromagnetic radiation in the optical portion of the em spectrum have what characteristics?
Can someone please answer this, ill give you brainliest Would be very appreciated.
The order is followed as
photosynthesisDecompositionCombustionRespirationDiffusionAnswer:
See below ~
Explanation:
Done from left to right :
Box 1 : Photosynthesis
Box 2 : Respiration
Box 3 : Combustion
Box 4 : Decomposition
Box 5 : Diffusion
How much force is required to accelerate a 12kg mass at 10m/s/s
Answer:
100N
Explanation:
The shortest distance between the initial position and the final position of moving body is called .............
The Answer Is Displacement
Find the magnitude of the induced current that flows through the resistor shown in the figure at t=3 s, if the magnetic field through the wire loop of 3.0 cm radius changing with time according to this equation B=2t^2−3.
The magnitude of the induced current is, (I=9 /R). The principal of ohm's law is employed in the given problem.
What is induced emf?Emf is the production of a potential difference in a coil as a result of changes in the magnetic flux passing through it.
When the flux coupling with a conductor or coil changes, electromotive force, or EMF, is said to be induced.
The given data in the problem is;
B is the magnetic field,= 2t^2−3.
t(time)=3 sec
The induced EMF is found as;
[tex]\rm E= \frac{d \phi}{dt} \\\\\ \rm E= \frac{d(2t^2-3)}{dt} \\\\\ E=4t-3\\\\\ t= 3 sec \\\\ E=12-3 \\\\\ E= 9 \ V[/tex]
From ohm's law;
E=IR
I=E/R
I=9 /R
Hence,the magnitude of the induced current is, (I=9 /R).
To learn more about the induced emf, refer to the link;
https://brainly.com/question/16764848
#SPJ1
Determine the work done to raise a mass of 8.0 kg through a height of 2.5 m on this planet.
Answer:
196 J
Explanation:
Formula
Work done(W) = Mass (m) x gravity (g) x height (h)Here, we are given :
m = 8.0 kgg = 9.8 m/s² (on Earth)h = 2.5 mSolving
W = 8 × 9.8 x 2.5W = 20 × 9.8W = 196 JWhich type of radiation is associated with high frequency waves?
Answer:
Gamma rays
Explanation:
have the highest energies, the shortest wavelengths, and the highest frequencies. Radio waves, on the other hand, have the lowest energies, longest wavelengths, and lowest frequencies of any type of EM radiation.
lookup the composition for air. what is the percentage of nitrogen and oxygen present in the air we breathe
78 percent nitrogen and 21 percent oxygen
The following diagram shows two meteors with masses of 1,000 kilograms and 3,000 kilograms spaced 10 meters apart. What is the magnitude of the gravitational force exerted by the 1,000 kg meteor on the 3,000 kg meteor? 2 × 10-9 N, 2 × 10-6 N, 7 × 10-10 N, 2 × 10-2 N
The attraction between masses as small as our bodies, or even objects the size of skyscrapers, is incredibly small. For example, two 1.0-kg masses located 1.0 meter apart exert a force of 6.7×10−11N 6.7 × 10 − 11 N on each other.Answer:
Explanation:
Even between objects the size of skyscrapers or masses as small as our bodies, there is incredibly little attraction. For instance, a force of 6.71011N is generated when two 1.0-kg masses are placed 1.0 meters apart. 6.7 10 11 N on top of one another.
What magnitude of gravitational force by the meteor?M/s2 is its SI unit. Its vector nature—which includes both magnitude and direction—makes it a quantity. The unit g stands for gravitational acceleration. At sea level, the standard value of g on earth's surface is 9.8 m/s2.
The magnitude of PQ is represented symbolically as | PQ |. The Distance Formula can be used to determine a vector's magnitude if its start and end points' coordinates are known.
Therefore, The distance between a vector's starting point P and ending point Q is its magnitude.
Learn more about gravitational force here:
https://brainly.com/question/12528243
#SPJ2
On an ice skating rink, a girl of mass 50 kg stands stationary, face to face with a boy of mass 80 kg. the children push off of one another, and the boy moves away with a velocity of 3 m/s. what is the final velocity of the girl? –1.9 m/s 1.9 m/s –4.8 m/s 4.8 m/s
The final velocity of the girl after the collision is determined as -4.8 m/s.
Final velocity of the girl
The final velocity of the girl is determined from the principle of conservation of linear momentum.
m1u1 + m2u2 = m1v1 + m2v2
50(0) + 80(0) = 50(v1) + 80(3)
0 = 50v1 + 240
50v1 = -240
v1 = -240/50
v1 = -4.8 m/s
Thus, the final velocity of the girl after the collision is determined as -4.8 m/s.
Learn more about conservation of linear momentum here: https://brainly.com/question/7538238
#SPJ4
A 5-kg ball rolling at a speed of 3 m/s strikes a 2-kg ball at rest. The 5-kg ball then comes to a stop and the 2-kg ball begins to roll forward. Determine how fast the 2-kg ball is moving.
Velocity: _ m/s
Answer:
7.5m/s
Explanation:
Law of conservation of momentum: momentum in a system before collision equals to that after collision/
5kg*3m/s=2kg*v
15kgm/s=2kg*v
v=7.5m/s
What happens in the gray zone between solid and liquid?
Answer:
Hence, the transition has to cross the grey zone from liquid to solid or solid to liquid. This grey zone transition is crucial, including the intermolecular forces acting on the molecules and each atom, making the change in state from hot to cold and cold to hot.
Explanation:
Answer:
Hence from liquid to solid or solid to liquid the transition has to cross the grey zone. This grey zone transition is is very crucial which includes the inter molecular forces acting on the molecules and each atoms which makes the change in state from hot to cold and cold to hot.
Explanation:
this is based on ideal gas law PV=nRT.
Where P is pressure, V is volume, R is gas constant and T is temperature. Hence from liquid to solid or solid to liquid the transition has to cross the grey zone.
This grey zone transition is is very crucial which includes the inter molecular forces acting on the molecules and each atoms which makes the change in state from hot to cold and cold to hot.
The best example is ice crystal formation and water formation from ice crystal .
Hence the inter molecular force of attraction happens to be involved with changes in grey zone
50 points physics question (multiple choice) Will give brainliest!
There are two systems that contain only the fundamental frequency and they are the systems C and D.
What is fundamental frequency?The term fundamental frequency refers to the lowest frequency of a vibrating body. It does not include the overtones or the harmonics.
From the image shown in the question, there are two systems that contain only the fundamental frequency and they are the systems C and D.
Learn more about fundamental frequency:https://brainly.com/question/9424813
#SPJ1
Mr b Kayla and gabby are working out to get fit fr the summer Mr b is using a barbell that weighs 50kg and lifts it a distance of 4 meters. Kayla is using a barbell that weighs 45kg and lifts it a distance of 7 meters and gaby is using a barbell that weighs 47kg and lifts it a distance of 8m who is working the hardest
This question involves the concepts of potential energy and work.
"Mr. Gabby" is working the hardest.
Who is working the hardest?In this case, the work done by each person is equal to the potential energy produced by raising the barbell.
[tex]W = P.E=mgh[/tex]
where,
W = work done m = mass of barbellg = acceleration due to gravity = 9.81 m/s²h = height raisedFor Mr. bm = 50 kgh = 4 mTherefore,
[tex]W=(50\ kg)(9.81\ m/s^2)(4\ m)\\W=1962\ J[/tex]
For Mr. Kaylam = 45 kgh = 7 m
Therefore,
[tex]W=(45\ kg)(9.81\ m/s^2)(7\ m)\\W=3090.15\ J[/tex]
For Mr. Gabbym = 47 kgh = 8 mTherefore,
[tex]W=(47\ kg)(9.81\ m/s^2)(8\ m)\\W=3688.56\ J[/tex]
It is clear that most work is done by Mr. Gabby.
Learn more about potential energy here:
https://brainly.com/question/24284560
#SPJ1
Match each type of heat transfer method with its description.
Match each type of heat transfer method with its description.
Conduction | Convection | Radiation
relates to density differences within fluidsdoes not require a medium or physical contact to transfer heat. occurs during physical contact between solid objects not in thermal equilibriumAnswer↷Conduction ↪ occurs during physical contact between solid objects not in thermal equilibrium.
________________________________
Convection↪ relates to density differences within fluids.
________________________________
Radiation ↪does not require a medium or physical contact to transfer heat.
________________________________
ㅤㅤㅤㅤㅤㅤ
ㅤㅤㅤㅤㅤㅤ
⋆-HOZI3RSMUS3-⋆
A force of 800 n is used to stop an object with a mass of 50 kg moving with a velocity of 35 m/s. how long will it take to stop this object?
variables:
equations:
answers
Answer:
KE = F * S initial kinetic energy will expended in stopping object
1/2 M V^2 = F * S
S = 1/2 * 50 * 35^2 / 800 = 38.3 m stopping distance
If you need to know the stopping time involved -
(V2 - V1) = a t where the change in velocity is 35 m/s
a = F / M = 800 / 50 = 16 m/s^2 deceleration of mass
t = 35 / 16 = 2.2 sec
In a nuclear reactor a moderator is used to
Answer: A material called moderator is used to slow down the neutrons released during nuclear fission. The source's neutrons have a high speed and energy. The neutrons' speed is slowed by heavy water or graphite moderators.
Explanation:
