Answer:
wouldn't be 2x more powerful with another magnet
Before the international building code was published in 2000, how many model building codes were in use
Answer:
The answer is 3.
Explanation:
There were 3 building codes in the 2000's.
Before the international building code was published in 2000, 3 model building codes were in use.
What is international building code?It is a critical tool for protecting public health and safety by protecting against hazards associated with the built environment.
It focuses on the development and implementation of innovative materials that meet or exceed public health and safety objectives.
The following are some examples of model building codes that are commonly used in the United States: The International Code Council's International Building Code.
The National Fire Protection Association's NFPA 5000 standard. The National Fire Protection Association's National Electrical Code.
Council formed by the merger of three model code agencies (ICBO, SBCCI, and BOCA) in 1994; published the International Building Code (IBC) in 2000. Every three years, the IBC (International Building Code) is updated.
Thus, there were 3 models building code.
For more details regarding international building code, visit:
https://brainly.com/question/28526076
#SPJ2
Which of the following describes what all team members should be given?
respect and advancement
attention and accurate information
respect and support
attention and equal opportunity
what is
[tex]34 \div 34[/tex]
Answer
one because when you divide any number by the same number the answer is one
Answer:
1
Explanation:
because every time you dived a number by its own number it is 1
Answer:
1
Explanation:
34 divided by 34 is one.
Select three changes that should be included in design documentation.
time
cost analysis
team members
decisions
materials
past products
The three changes that should be included in design documentation are:
TimeTeam membersMaterialsWhat is design documentation?Design documentation can be defined as a strategic process that involves gathering all the written documents and resources pertaining to the design of a product or system are put together.
In this context, the three (3) changes that should be included in design documentation include the following:
TimeTeam membersMaterialsRead more on design documentation here: https://brainly.com/question/4360514
Airbags may deploy in the
of the passenger or
driver, or from the
of the vehicle.
Answer:
dashboard
Explanation:
in the dashboard of the passenger seat.
Curtain airbags are side-impact airbags that are designed to protect passengers and drivers from a side impact crash and even help prevent being thrown from the vehicle if the vehicle rolls over after being struck from the side.
What are curtain airbags?For many years, the side curtain airbag has received higher safety ratings in passenger cars and minivans. However, automakers have recently discovered new ways to adapt side curtain technology for niche applications, particularly in high-risk vehicles. Convertible and SUV drivers, for example, already benefit from side curtain protection and rollover-specific security.
Curtain airbags can also be extremely useful as subcompacts become more popular. Despite consumer and regulatory concerns about the structural integrity of small cars, a new microcar will use curtain airbags to protect its passengers' necks. If curtain airbags are proven to be effective in rear collisions, they could play a role in improving public perception of small and efficient vehicles.
Learn more about airbags on:
brainly.com/question/2607849
#SPJ2
Please help me on this it’s due now
Answer:
road closures on deliver routes.. i think..
help i need to find out how to replace a water hose in a truck
49. Your Field of Vision is?
Answer:
d. what you can see directly ahead of you
Explanation:
field of vision (definition) = what we see when we look directly ahead with our head straight
Hope this helps!
- profparis
Conclude from the scenario below which type of documentation Holly should use, and explain why this would be the best choice
Holly is going to use the reverse engineering process to deconstruct an Apple computer. She would like to see how the computer works, diagram its components, and document how the product functions.
The type of documentation that Holly should use is to generate a graphic representation of the Apple system.
What is Reverse Engineering?This refers to the methodical act of dismantling an object in order to learn how it works or was constructed.
Hence, the use of a graphic representation of the Apple system which Holly wants to reverse engineer is the best option because it uses a standard document UML notation.
Read more about reverse engineering here:
https://brainly.com/question/25682883
Answer:
?
Explanation:
Describe why the scenario below fails to meet the criteria for proper reverse engineering.
Meghan has been assigned to reverse engineer a skyscraper. She has created three different original skyscraper sketches. She has hired a team to assist her with a totally different building, and she has instructed them not to look at documents or information from existing structures.
The scenario does not meet the criteria for proper reverse engineering because reverse engineering is the reverse process of assembly.
What does reverse engineering do?Reverse Engineering is the name given to the process of exploring an object that consists of “deconstructing” it. In other words, dismantling an object to study it. For example, when a child takes the toy apart to understand how it works, he is practicing Reverse Engineering.
With this information, we can conclude that the scenario does not meet the criteria for proper reverse engineering because this type of engineering is the reverse process of assembly.
Learn more about reverse engineering in brainly.com/question/10175918
what is traffic flow in a floor plan?
Answer:
Traffic flow is how people would travel from one room to another
Explanation:
Which of the following is not a type of simple machine?
A. pair of pliers
B. ramp
C. wheel and axle
D pulley
Answer:
The correct Answer A.pair of pliers
What is the name of the device fitted underneath the rear bumper on some cars for either purposes of appearance or to increase aerodynamic performance
Answer:
Protruding feelers
Explanation:
In fuel oil piping systems, all exterior above-grade fill piping shall be __________ when tanks are abandoned or removed.
Answer:
Removed
Hope this Helps!
SUPER EASYY!!!!!
LIST 3 HAZARDS FOR SOLDERING AND HOW TO PREVENT THEM
Answer:
The best way to prevent soldering fume inhalation is to install and ensure the proper maintenance of a local exhaust ventilation (LEV) system at each soldering station. These vacuum-like ventilation units remove the bulk of these fumes right at their source, before you or nearby coworkers have the chance to inhale them.
Explanation:
to use your turn signals legally you should
Answer:
100ft before turning or changing lanes
What is the tolerance for number 4?
Answer: 0.02 units or 20±0.02 units or 19.98-20.02 units
(all are the same)
Explanation:
says on the sheet. Unless otherwise stated 0.XX = ±0.02 tolerance
What should you always do before making any alignment
adjustments?
A) Perform necessary repairs to worn or damaged suspension components.
B) Decide whether you should adjust the front or the rear first.
C) Road test the vehicle over a bumpy road.
D) Check for DTC's.
Back
Next
Answer:
A) Perform necessary repairs to worn or damaged suspension components
which type of irrigation fluid is typically used for endoscopic procedures using monopolar electrosurgery
An irrigation fluid that is used for endoscopic procedures using monopolar electrosurgery is Glycine 1.5% solution.
What is an irrigation fluid?This is a fluid that is used for dilation during the process of endoscopic surgery.
What the fluid does is that it helps to wash away dirt from the operating area after it has dilated the area.
Read more on irrigation fluid here: https://brainly.com/question/13246758
What is the tolerance of number 4?
Answer:
Answer: ±0.02 units or 20±0.02 units or 19.98-20.02 units depending on how they prefer its written (typically the first or second one)
Explanation:
says on the sheet. Unless otherwise stated 0.XX = ±0.02 tolerance
(based on image sent in other post)
Is it safe to keep a cylinder next to the actual wending or cutting operation. True or false
why are bananas engineering
