Jack was playing with a toy car and a track that records velocity over time using sensors and it generated the graph below:
At which points on the graph is the car showing acceleration?
Group of answer choices
Sections a, c, and d
Sections a, b, c, and d
Sections a and d
Section a only
Answers
Answer:
a,c, and d
Explanation:
if velocity is not a flat line, that means there is acceleration, whether it is positive or negative acceleration.
Related Questions
A purified protein has a molecular mass of 360 kDa when measured by size exclusion chromatography. When analyzed by gel electrophoresis in the presence of SDS, three bands are observed, with molecular masses of 160, 140, and 60 kDa. When gel electrophoresis is carried out in the presence of SDS and dithiothreitol, three bands are once again observed, with molecular masses of 140, 80, and 60 kDa. What is the subunit composition of the protein?
Answers
Answer:
A protein has four subunits whose molecular masses are 140, 80, and 60 kDa.
A disulfide bond links the two 80 kDa subunits (possibly identical).
Explanation:
Given that:
A protein has four subunits whose molecular masses are 140, 80, and 60 kDa.
A disulfide bond links the two 80 kDa subunits (possibly identical).
As a result of SDS and dithiothreitol analysis treatment, the molecular masses can not be 360 in total. They are 280, which implies that they are in short of 80 kDa. This means that there are possibilities that two groups with a molecular mass of 80 kDa which are joined by a disulfide bond.
The presence of SDS and dithiothreitol acts as a reducing agent, and they can break disulfide bonds whose pH is greater than 7, i.e. those in basic condition.
A ______________________ is required to cause atoms to bond together or be separated from one another. *
a physical change
b phase change
c radioactive decay
d chemical reaction
Answers
Answer:
d chemical reaction..
Help me out i don’t not understand this
Answers
Explanation:
hope this helps!!! happy learning!!!!
The density of aluminum is 2.7 g/cm3. A metal sample has a mass of 52.0 grams and a volume of 17.1 cubic centimeters. Could the sample be aluminum? EXPLAIN your answer.
Answers
Answer:
The given metal sample is not aluminum because its density is 3.0 g/cm³ while density of aluminum is 2.7 g/cm³.
Explanation:
Given data:
Density of aluminum = 2.7 g/cm³
Mass of metal sample = 52.0 g
Volume of metal sample = 17.1 cm³
which sample is that = ?
Solution:
The given problem will be solve through density formula.
d = m/v
d = density
m = mass
v= volume
Now we will put the values in formula.
d = 52.0 g/ 17.1 cm³
d = 3.0 g/cm³
It is given in question the density of aluminum is 2.7 g/cm³. The given metal sample is not aluminum because its density is 3.0 g/cm³.
What is the molar mass of Mg(ClO4)2?
Answers
Answer:
223.21 g /mol
Explanation:
To find the molar mass (g/mol) of a substance, you have to add the amu's of all the elements together. First you have to determine how of element there are:
Mg=1, Cl=2, O=8. Now you multiply the amu of each element by the number of elements in the compound. Then add them together. The amu of an element and its molar mass are the same.
1(24.31 g/mol) + 2(35.45 g/mol) + 8(16.00 g/mol) = 223.31 g/mol
223.31 g/mol is the molar mass of the given compound. The molar mass of a material is a bulk attribute rather than a molecular one.
The ratio among the mass with the quantity of a substance (measured in mole) of any sample of a chemical compound is known as the molar mass (M) in chemistry. The compound's molar mass represents an average over numerous samples, which frequently have different masses because of isotopes. A terrestrial average as well as a function of the relative distribution of the isotopes of the component atoms on Earth, the molar mass is most frequently calculated using the standard atomic weights.
Molar mass=1(24.31 g/mol) + 2(35.45 g/mol) + 8(16.00 g/mol)
= 223.31 g/mol
To know more about molar mass, here:
brainly.com/question/12127540
#SPJ6
Help pls 100 points and brainiest
Answers
Answer:
See below
Explanation:
INdependent = amount of med given
Dependent = recovery time <==== this 'depends' on the amount of medicine given
what does the o in chemistry mean?
Answers
look at the periodic table and it says it
Answer:
oxygen
Explanation:
periodic table
One isotope of Carbon(C) has exactly the same mass number and atomic mass since it was used as the definition of the atomic mass unit. Which isotope is it and what is it’s atomic mass?
Answers
hope this helps have a great day !
what are the two components present in the colloid
Answers
Answer:
the two components in colloid are dispersed phase and dispersing medium
I hope this helps
How many days are in 5.75 weeks?
Answers
Answer:
There are 40.25 days in 5.75 weeks
Answer: 40.25
Hope this helped! :)
The gas cyclobutane, C4H8(g), can be used in welding. When cyclobutane is burned in oxygen, the reaction is: C4H8(g) + 6 O2(g)4 CO2(g) + 4 H2O(g) (a) Using the following data, calculate ΔH° for this reaction. ΔH°f kJ mol-1: C4H8(g) = 27.7 ; CO2(g) = -393.5 ; H2O(g) = -241.8 ΔH° = kJ (b) Calculate the total heat capacity of 4 mol of CO2(g) and 4 mol of H2O(g), using CCO2(g) = 37.1 J K-1 mol-1 and CH2O(g) = 33.6 J K-1 mol-1. C = J K-1 (c) When this reaction is carried out in an open flame, almost all the heat produced in part (a) goes to raise the temperature of the products. Assuming that the reactants are at 25°C, calculate the maximum flame temperature that is attainable in an open flame burning cyclobutane in oxygen. The actual flame temperature would be lower than this because heat is lost to the surroundings. Maximum temperature = °C
Answers
Answer:
a
[tex]\Delta H^o _{rxn} = -2568.9 \ kJ [/tex]
b
[tex]H = 350 JK^{-1}[/tex]
c
[tex]T_{max} = 32.4 ^o C[/tex]
Explanation:
From the question we are told that
The reaction of cyclobutane and oxygen is
[tex]C_4H_8_{(g)} + 6 O_2_{(g)} \to 4 CO_2_{(g)} + 4 H_2O_{(g)}[/tex]
ΔH°f (kJ mol-1) : C4H8(g) = 27.7 ; CO2(g) = -393.5 ; H2O(g) = -241.8 ΔH° = kJ
Generally ΔH° for this reaction is mathematically represented as
[tex]\Delta H^o _{rxn} = [[4 * \Delta H^o_f (CO_2_{(g)} ) + 4 * \Delta H^o_f(H_2O_{(g)} ] -[\Delta H^o_f (C_2H_6_{(g)} + 6 * \Delta H^o_f (O_2_{(g)}) ] ][/tex]
=> [tex]\Delta H^o _{rxn} = [[4 * (-393.5) + 4 * (-241.8) ] -[ 27.7 + 6 * 0][/tex]
=> [tex]\Delta H^o _{rxn} = -2568.9 \ kJ [/tex]
Generally the total heat capacity of 4 mol of CO2(g) and 4 mol of H2O(g), using CCO2(g) = 37.1 J K-1 mol-1 and CH2O(g) = 33.6 J K-1 mol-1. C = J K-1 is mathematically represented as
[tex]H = [ 4 * C_{CO_2_{(g)}} + 6* C_{CH_2O_{(g)}}][/tex]
=> [tex]H = [ 4 * 37.1 + 6* 33.6 ][/tex]
=> [tex]H = 350 JK^{-1}[/tex]
From the question the initial temperature of reactant is [tex]T_i = 25^oC[/tex]
Generally the enthalpy change([tex]\Delta H^o _{rxn}[/tex]) of the reaction is mathematically represented as
[tex]|\Delta H^o _{rxn} |= H * (T_{max} -T_i)[/tex]
[tex] 2568.9 = 350 * (T_{max} -25)[/tex]
=> [tex]\frac{2568.9 }{350} = T_{max} - 25[/tex]
=> [tex]T_{max} = 32.4 ^o C[/tex]
Test (Speed, Velocity and Acceleration)
A dog can run as fast as 15 miles per hour for a short distance. If a dog ran at this speed 0.10 of an hour, how far would it run?
Answers
Answer:
1.5 miles
Explanation:
Given that,
Speed of dog, v = 15 mph
Time taken by the dog, t = 0.1 h
We need to find the distance travelled by the dog. We know that, distance is the product of speed and time. So,
d=vt
[tex]d=15\times 0.1\\\\d=1.5\ \text{miles}[/tex]
Hence, the dog will cover a distance of 1.5 miles.
Which factor is most important to consider when evaluating a journal article about global warming? Is the article long enough? Does the article contain facts or only opinions? Did the author of the article use complex, scientific words? Does the author of the article have a doctorate degree?
Answers
Answer:
Does the article contain facts or only opinions
Got it right on edg.
Answer:
B) Does the article contain facts or only opinions?
Explanation:
Draw the Lewis structure for CF3PCF2 where all fluorines are bonded to a C atom
Answers
Answer:
See attached picture.
Explanation:
Hello.
As you can see on the attached picture, this Lewis structure requires all the elements to attain eight electrons after bonding, that is why the phosphorous is bonded with the two carbon atoms via a single bond with the carbon having the three fluorine atoms and a double bond with the carbon having the two carbon atoms.
Such arrangement is due to the fact that:
- P gets eight electrons by obtaining three from the two sided carbon atoms.
- The first carbon gets eight electrons from its initial four, three provided by each surrounding fluorine and one from the central phosphorous.
- Each fluorine gets eight valence electrons from their initial seven and one from the available carbon atoms.
Best regards.
Question 3 (12 points)
The core becomes a
a hot, dense, slowly cooling sphere of carbon.
Оа
red dwarf
Answers
Answer:
c
Explanation:
Help me please answer this with solution....A piece of granite weighing 250g is heated in a boiling water to 100°C. When a granite is place in a calorimeter containing 400g water, the temperature of the water increases from 20°C to 28.5°C. What is the specific heat of the granite, assuming all the heat is transferred to the water?
Answers
heat lost by granite + heat gained by H2O = 0
[mass granite x specific heat granit x (Tfinal-Tinitial)] + [mass H2O x specific heat H2O x (Tfinal-Tinitial)] = 0
Substitute and solve for specific heat granite, the only unknown.
The specific heat capacity of the granite is 0.796 J/gºC
We'll begin by calculating the heat absorbed by the water. This can be obtained as follow:
Mass of water (M) = 400 g
Initial temperature of water (T₁) = 20 °C
Final temperature (T₂) = 28.5 °C
Change in temperature (ΔT) = T₂ – T₁ = 28.5 – 20 = 8.5 °C
Specific heat capacity of water (C) = 4.184 J/gºC
Heat absorbed (Q) =?Q = MCΔT
Q = 400 × 4.184 × 8.5
Q = 14225.6 JThus, the heat absorbed by the water is 14225.6 J
Finally, we shall determine the specific heat capacity of the graniteHeat absorbed = Heat released
Heat absorbed = 14225.6 J
Heat released = –14225.6 JMass of granite (M) = 250 g
Initial temperature of granite (T₁) = 100 °C
Final temperature (T₂) = 28.5 °C
Change in temperature (ΔT) = T₂ – T₁ = 28.5 – 100 = –71.5 °C
Specific heat capacity of granite (C) =?Q = MCΔT
–14225.6 = 250 × C × –71.5
–14225.6 = –17875 × C
Divide both side by –17875
C = –14225.6 / –17875
C = 0.796 J/gºCTherefore, the specific heat capacity of the granite is 0.796 J/gºC
Learn more: https://brainly.com/question/21218237
Which of these is the smallest?
cells
atoms
molecules
cell membranes
Science 7th grade
Answers
Answer: atoms
Explanation: cell membrane is in a cell
What is the concentration of a dextrose solution prepared by diluting 15 mL of a 1.0 M dextrose solution to 25 mL using a 25 mL volumetric flask
Answers
Answer:
C₂ = 0.60 M
Explanation:
Step 1: Given data
Concentration of the concentrated solution (C₁): 1.0 MVolume of the concentrated solution (V₁): 15 mLConcentration of the diluted solution (C₂): ?Volume of the diluted solution (V₂): 25 mLStep 2: Calculate the concentration of the diluted dextrose solution
We will use the dilution rule.
C₁ × V₁ = C₂ × V₂
C₂ = C₁ × V₁ / V₂
C₂ = 1.0 M × 15 mL / 25 mL
C₂ = 0.60 M
A 10.0-g sheet of gold with a temperature of 18.0°C is laid flat on a sheet of iron that weighs 20.0 g and has a temperature of 55.6°C. Given that the specific heats of Au and Fe are 0.129 J g-1 0 c-1 and 0.444 J g-1 0 c-1, respectively, what is the final temperature of the combined metals? Assume that no heat is lost to the surroundings. (Hint: The heat gained by the gold must be equal to the heat lost by the iron.)
Answers
Answer:
T = 50.83°C
Explanation:
Let the final temperature be T .
heat lost = mass x specific heat x fall in temperature
heat lost by iron = 20 x .444 x ( 55.6 - T )
heat gained by gold = 10 x .129 x ( T- 18 )
heat lost = heat gained
20 x .444 x ( 55.6 - T ) = 10 x .129 x ( T- 18 )
493.73 - 8.88 T = 1.29 T - 23.22
10.17 T = 516.95
T = 50.83°C
The final temperature of the combined metals (gold and iron) is 50.83°C.
Given the following data:
Initial temperature of gold = 18.0°CFinal temperature of iron = 55.6°CMass of gold = 10.0 gMass of iron = 20.0 gSpecific heat capacity of iron = 0.444 J/g°C.Specific heat capacity of gold = 0.129 J/g°C.To find the final temperature of the combined metals (gold and iron):
Heat lost by the iron = Heat gained by the gold.
[tex]Q_{lost} = Q_{gained}\\\\mc\theta = mc\theta\\\\20(0.444)(55.6 - T_f) = 10(0.129)(T_f - 18)\\\\8.88(55.6 - T_f) = 1.29(T_f - 18)\\\\493.728 - 8.88T_f = 1.29T_f - 23.22\\\\8.88T_f + 1.29T_f = 493.728 + 23.22\\\\10.17T_f = 516.948\\\\T_f = \frac{516.948}{10.17}[/tex]
Final temperature = 50.83°C
Read more: https://brainly.com/question/188778
A student needs 1.52 moles of sodium hydroxide (NaOH). How many grams of sodium hydroxide are required? (1 mole NaOH = 40.00 grams NaOH) *
60.8 grams NaOH
1.00 grams NaOH
62.7 grams NaOH
0.038 grams NaOH
Answers
Answer:
1 molecule = 40.00 grams
1.52 molecules = 1.52*40.00
= 60.8 grams
Why does water vapor
condense at higher
elevations?
A. cooling causes condensation
B. faster particle activity
C. due to a chemical change
D. due to a chemical reaction
Answers
Answer:
A. cooling causes condensation
Explanation:
air is cooler at higher altitude in the troposphere.
why is earth often referd as a blue planet ?
A-When viewed from space, the biosphere always looks blue.
B-Most people like blue.
C-The sky is blue.
D-The hydrosphere looks blue and covers three-fourths of the Earth’s surface.
NEED ANSWER ASAP
Answers
Answer:
D-The hydrosphere looks blue and covers three-fourths of the Earth’s surface.
Explanation:
Q1. Why is Cl2 a nonpolar molecule, but HCl is a polar molecule? Explain your reasoning.
Answers
Answer:
\/\/
Explanation:
in CI2 the electron charge is identical on both atoms but on HCI electrons are shared unequally between the chlorine atoms and hydrogen atoms
Which of the four models represents a solid
Answers
Answer:
is there an image
Explanation:
what are the two main phases of cell division
Answers
Answer:
Mitosis meiosis
Explain:
Mitosis is where the cell splits into 2 more cells (diploid)
Meiosis is where the cell splits into 2, and then split again, making 4 (haploid)
three students measured the volume of water with three different devices they report the volumes
large cylinder 164 ml
small cylinder 39.7 ml
calibrated buret 18.16 ml
if they pour it into a single container what is the volume
Answers
Answer:
The total volume of water is 222 ml.
Explanation:
Given that,
Volume of water by different devices are,
First large cylinder =164 ml
Second small cylinder = 39.7 ml
Third calibrated burette = 18.16 ml
We need to calculate the total volume of water
Using given data
volume of total water=volume by large cylinder+volume by small cylinder+volume by calibrated burette
Put the value into the formula
[tex]V_{w}=164+39.7+18.16[/tex]
[tex]V_{w}=221.8\approx 222\ ml[/tex]
Hence, The total volume of water is 222 ml.
The world map below shows the locations of San Francisco and Dublin which of these statements best explains why Dublin is not cooler than San Francisco although it is over 1600 km further north?
Answers
Answer:
Dublin is warmed by ocean currents.
Explanation:
Got it right on test
Answer:
B. Dublin is warmed by ocean currents.
Explanation:
PLEASE HELP ME
For which of the following reactions is ΔH∘rxn equal to ΔH∘f of the product(s)? You do not need to look up any values to answer this question.
Check all that apply.
H2(g)+12O2(g)→H2O(g)
Li(s)+12F2(g)→LiF(s)
2Li(s)+F2(g)→2LiF(s)
Li(s)+12F2(l)→LiF(s)
2H2(g)+O2(g)→2H2O(g)
H2O2(g)→12O2(g)+H2O(g)
Answers
Answer:
Explanation:
Li(s)+1/2 F₂(g)→LiF(s)
In this reaction one mole of product is formed from gaseous state of reactants . So this reaction will represent the reaction for which ΔH∘rxn equals to ΔH∘f .
In other reaction one mole is not produced if we balance the reaction. The reactant must be in gaseous state . ΔH∘f . represents heat of formation . ΔH∘rxn represents heat of reaction .
What is a faze of matter
Answers
Answer:
solider liquid and gas plasma
Explanation:
in physical a state of matter is one of the distant form in which matter can exist four states of matter are observable in everyday life solid liquid and gas and plasma. hope it helps
In physics, a state of matter is one of the distinct forms in which matter can exist. Four states of matter are observable in everyday life: solid, liquid, gas, and plasma.
What do you notice about the relationship between the force strength and the size of the velocity change?
Answers
Answer:
fkv SFHHHHHHHHHCB FSSSSZCHJjjjb .SFFHHHHHHHHC
Explanation:
What do you notice about the relationship between the force strength and the size of the velocity change?
Uuuuuuu
