In these images taken a few days apart, the light part of the Moon appeared to get smaller
over time. Why did this happen? (1)

a) The Moon moved farther away from the sun so less sunlight reached the Moon's
surface.

b) Earth moved so its shadow was blocking more of the Moon so the student astronomer
was able to see less of it.

c) The Moon rotated so that less of the light-colored rock on the Moon's surface faced
Earth

d) The Moon moved so that the student astronomer was able to see less of the half that
facer the sun

Answer:

D

Explanation:

Sum of the concentrations of each of reactant species is equal to the sum of the concentrations of each of the product species

Answer:

Explanation:

85 = ½(0.43)t²

t = √(2(85)/0.43)

t = 19.883380...

t = 20 s

v→ 8.55 m/s initial, 0 m/s final

a← 0.43 m/s²

Answer:

40s

Explanation:

The distance through which the rider at the end of the beam moves is;

L = 15.5 m

We are told that the beam on which the carnival ride is fixed is 12.6m in length.

Since the seat is at the end of the beam with the other end pivoted and the beam sweeps through an angle of 141°, then we can say that the radius of this arc formed by the swing is;

Radius; r = 12.6 m

Also, θ = 141°

The distance through which the driver moves will be the length of the arc formed by the beam at angle of 141°.

Formula for length of arc is given as;

L = 2πr(θ/360)

Plugging in the relevant values gives;

L = 2π × 12.6 × 141/360

L = 15.5 m

Read more at; https://brainly.com/question/22561081

The definition of moment of inertia and kinetic energy we can find the results for the questions are:  

          a) The moment of inertia is: I = 32.49 kg m²

          b) The kinetic energy is: K = 509.4 J

a) The moment of inertia is a scalar quantity that has the same function as mass, it is given by

             I = m r²

They indicate that the length of the bar is y₁ = 5.70 m, if the two rigid bars form the square that supports the masses, the distance from the center to the end where each mass is:  

            r = y₁ / 2

             r = 5.70 / 2 = 2.85 m

The moment of inertia of the system is.

         I = 4 m r²

Let's calculate.

        I =4 m 2.85²

        I = 32.49m kg m²

If we assume that the mass of each point particle is:

        m = 1 kg

         I = 32.49 kg m²

b) They ask for the rotational kinetic energy, if the angular velocity is.

           w = 5.60 rad / s

The kinetic energy for rotational motion is.

         K = ½ I w²

Let's calculate.

          K = ½ 32.49 5.60²

          K = 509.4 J

In conclusion with the definition of moment of inertia and kinetic energy we can find the results for the questions are:

          a) The moment of inertia is: I = 32.49 kg m²

          b) The kinetic energy is: K = 509.4 J

Learn more here:  brainly.com/question/14838079

Answer:

B

Explanation:

B

Answer:

sorry I don't know the answer

Answer:

Thermogenesis:Your body's muscles, organs, and brain produce heat in a variety of ways

Explanation:

For example, muscles can produce heat by shivering. Hormonal thermogenesis: Your thyroid gland releases hormones to increase your metabolism. This increases the energy your body creates and the amount of heat it produces

The expression for the centripetal acceleration allows to find the results for the questions are:

A) The acceleration varies INVERSELY with the radius of curvature.

B) The acceleration varies DIRECTLY with the speed.

C) The acceleration becomes four times greater.

D) The acceleration becomes nine times greater.

E) The acceleration is reduced to half.

F) The acceleration is reduced to a third.

In circular motion there must be an acceleration towards the center of the circle, it is called cenripetal acceleration, in this case all the energy supplied to the system is used to change the direction of the speed even when its magnitude remains constant.

        [tex]a_c = \frac{v^2}{r}[/tex]  

Where [tex]a_c[/tex] the centripetal acceleration, v is the speed and r the radius of curvature of the circle.

Now we can answer the questions about centripetal acceleration.

A) For the same speed, the acceleration varies INVERSELY with the radius of curvature.

B) For the same radius of curvature the acceleration varies DIRECTLY with the speed.

C) The speed is doubled

         v = 2 v₀

         [tex]a_c = \frac{(2v_o)^2 }{r}[/tex]  

         [tex]a_c = 4 \ \frac{v_o^2 }{r}[/tex]  

The acceleration becomes four times greater than the original value

D) The speed is tripled

         v = 3 v₀

         [tex]a_c = 9 \frac{ v_o^2}{r}[/tex]  

Acceleration becomes nine times greater than the original

E) the radius of curvature is doubled

        r = 2 r₀  

        [tex]a_c = \frac{v_o^2}{2 r_o }[/tex]  

        [tex]a_c = \frac{1}{2} a_o[/tex]  

Acceleration is reduced to half the original value

F) The radius of curvature is tripled

       r = 3 r₀

       [tex]a_c = \frac{v_o^2 }{3 r_o} \\ \\a_c = \frac{1}{3} a_o[/tex]  

The acceleration is reduced to a third of the initial one.

In conclusion using the expression for the centripetal acceleration we can find the answers for the questions are:

A) The acceleration varies INVERSELY with the radius of curvature.

B) The acceleration varies DIRECTLY with the speed.

C) The acceleration becomes four times greater.

D) The acceleration becomes nine times greater.

E) The acceleration is reduced to half.

F) The acceleration is reduced to a third.

Learn more here: brainly.com/question/6082363

Answer:

Explanation:

F = ma

Assuming the 20° is angle θ measured to the horizontal

mgsinθ - μmgcosθ = ma

g(sinθ - μcosθ) = a

at constant velocity, a = 0

g(sinθ - μcosθ) = 0

   sinθ - μcosθ = 0

                 sinθ = μcosθ

μ = sinθ/cosθ

μ = tanθ

μ = tan20

μ = 0.3639702342...

μ = 0.36

Answer:

D) 19.8 lbs

Explanation:

1kg in household measurement is equal to 35.274 ounces. 35.274*9=317.466 ounces.

1kg is also equal to 2.205 lbs. 9*2.205=19.8416

9 kg is also equal to 9000 grams, but grams are not a part of the household measurement system

a) 9000 grams. b) 9000 ounces. c) 19.8 ounces. d) 19.8 pounds.

This leaves us with 19.8 lbs

Answer: it’s 3 seconds

Explanation:

Answer:

B

Explanation:

3 seconds, hope it helps

Answer:

reinforcing stimulus

Explanation:

Think its correct

Answer:

reinforcing stimulus

Explanation:

because it increases the occurence of a response

Answer: Liquid - Lotion

Suspension - Semisolid

Capsule - Solid

Explanation:

Give Brainliest if correct :)

Hi there!

We know that:

Force due to gravity = Mgsinθ

Force due to friction = μMgcosθ

Let the positive direction be directed in the direction of the block's acceleration, which is downward.

Thus:

ΣF = Mgsinθ - μMgcosθ

Solving for acceleration requires diving all terms by the mass, so:

a = gsinθ - μgcosθ

Substitute in given values. (g = 9.8 m/s²)

a = 9.8sin(30) - 0.3(9.8)cos(30) = 2.354 m/s²

Answer:

First, find the maximum height, which according to the values given, can be stated as:

H=(u²sin²theta)/2g

u=15m/s, theta=25 degrees, g=9.8m/s²

H= (15² * (sin 25)²))/2*9.8

H= (225*0.179)/19.6

H= 40.275/19.6

=2.06m

To find the velocity at maximum height:

Use the formula

v²=u²-2gH

It's minus because the brick was thrown upwards

So plugging everything into the above formula:

v²=15²-2*9.8*2.06

v²=225–40.376

v²=184.624

v=√184.624

v=13.59m/s

Answer:

No because you don't have to be black or white you don't have to be a pacific race to just get it like lets say for example a asian person come in and they want to get a abortion but the doctor say no then that person can end up killing her self or when the baby is born she could end you know doing something bad. But no you do not have to be a pacific person to just get it

Explanation:

Explanation:

this is actually not as simple as it sounds here.

quite some energy is lost in the deformation of the bodies of car and truck, and it also needs more energy to get a standing object going than to accelerate an already moving object.

but assuming the simple described circumstances, then the energy and impulse of the moving truck of 5000 kg is transferred to a new combined system of car and truck of now 5000 + 3000 = 8000 kg.

so, the 20m/s inertia energy of the truck is now distributed to the truck/car combination.

since the same energy has to move now more mass, it is clear that the combined speed will be lower.

20×5000 = x×8000

20×5 = x×8

x = 100/8 = 12.5 m/s

that is the resulting speed of the combined truck/car object.

Answer:

A and D

b and C are false

Answer:

D. Animals migrate for various reasons.

Explanation:

Got it right on Edge 2023. : )

Answer:

Explanation:

Answer in the pic.. hope it helps

F = GMm/r^2

So F is proportional to 1/r^2

F2 = 2700 x ( 1 / 3^2 ) = 300N

A simple device used for spinning is a hand spindle also known as takli.

hope it helps

Answer:

the cardiovascular system

Answer:

Explanation:

Your numbers seem wonky, so I'll just assume that the initial displacement is a distance A (Amplitude) from the equilibrium position. Spring constant = k

Initial potential energy is

PE = ½kA²

As potential energy and kinetic energy are constantly exchanging in SHM,

the position x where half of the original spring potential exists is found where

½kx² = ½(½kA²)

    x² = ½A²

    x = (√0.5)A

    x ≈ 0.707A

just plug in your actual starting position A

With A = 5.2 cm

x = 3.67695... 3.7 cm

Answer:

Study hard , focus on your studies and alyways ask questions .

Study, revise, write notes, listen in class, don't let yourself be distracted by others, and do the work in class...maybe join stem or science club if you wanna

Hope this helped you- have a good day bro cya)

Answer:

Table C:

Fan Speed Observations of Position vs. Time Graphs

Low:

The slope is curved and it increases as you go up . The points start off close but they spread out as the time increases.

Medium:

The speed increases quicker than the graph for low speed. The graph is less curved than the one for low speed. Also, the points spread out faster than they did for low speed as the time increases.

High:

The Graph has a smaller curve then the low and medium speed. Also, the points are the furthest apart. The slope is not as spaced out as it was for the rest of the speed graphs.

Explanation:

hope it helps

Variations in the angle of inclination or the mass of the cart could be investigated further to investigate the impact on acceleration and further validate the principles of constant acceleration motion.

Objective: The goal of this lab experiment was to investigate the motion of an item with constant acceleration and to examine its velocity as a function of time.

Materials:

Smooth, inclined plane

Cart or tiny wheeled object

Stopwatches and timers

Measuring tape or meterstick

Procedure:

Set up the inclined plane at a 45-degree angle () to the horizontal surface. Check that the plane is smooth and clear of obstacles.

Place the cart or small wheeled object at the bottom of the inclined plane.

Using a meterstick or measuring tape, determine the height (h) and length (L) of the inclined plane.

Ascertain that the cart is at rest at the starting point, which is located at the bottom of the inclined plane.

As soon as the cart is freed and begins to move, start the stopwatch or timer.

Calculate the time (t) it takes the cart to reach each place along the inclined plane. To ensure reliable data gathering, repeat the experiment numerous times.

Determine the time intervals (Δt) between each position for velocity analysis

Data:

Position (m) Time (s) Time Interval (Δt) (s)

0.0                   0.00           -

0.5                   0.50        0.50

1.0                   0.75        0.25

1.5                    1.10              0.35

2.0                    1.50        0.40

Analysis:

Calculate the average velocity between each position by dividing the position change by the time interval (x/t).

Create a graph that plots average velocity (V_avg) versus time (t).

Results:

A straight line emerges from the graph of average velocity against time, demonstrating that the cart's motion was subject to continuous acceleration along the inclined plane. The slope of the graph reflects the acceleration (a) of the cart.

Conclusion:

The experiment successfully demonstrated motion along an inclined plane with constant acceleration. The graph of average velocity vs time revealed important information about the cart's speed, with a linear relationship suggesting steady acceleration. This experiment emphasizes kinematic principles and the significance of using velocity-time data to understand the motion of objects under constant acceleration.

Hence, variations in the angle of inclination or the mass of the cart could be investigated further to investigate the impact on acceleration and further validate the principles of constant acceleration motion.

To learn more about Acceleration, here:

brainly.com/question/2303856

#SPJ3

Answer:

Ac = v²/r

where, Ac is centripetal acceleration

v is velocity

r is radius

5 = (20)²/r

r = 400/5

r = 80m

from,

w = 2πf

where, w = angular velocity and f frequency

w = v/r

f = n/T

then,

v = 2πrn ,n = 1 to complete 1 cycle

T

T = 2πr/v

T = 2π*80/20

T = 25.14seconds.

The car would take 25.14s to complete 1 cycle of the roundabout.

Answer:

B. Chemical energy

Explanation:

chemical energy is the energy stored in the bonds between atoms

Answer:

c

Explanation: