In a building, air moves due to currents caused by temperature differences. Which

A. statement best describes these currents?

B. They transfer thermal energy due to radiation.

C. They transfer electrical energy due to convection.

D. They transfer thermal energy due to convection.

Answers

Answer 1

Answer:

D. they transfer thermal energy due to convection

Answer 2

In a building, air moves due to currents caused by temperature differences. They transfer thermal energy due to convection. this statement best describes these currents. Hence option D is correct.

What is Temperature ?

Temperature is a physical quantity which measures hotness and coldness of a body. Temperature measures the degree of vibration of molecule in a body. Temperature is measured in centigrade (°C), Fahrenheit (°F) and Kelvin (K) in which Kelvin (K) is a SI unit of temperature. Absolute scale of temperature means Kelvin scale of temperature. relation between Kelvin(K) and centigrade (°C), °C= K - 273.15 from equation, 273.15 K means 0 °C, which is freezing point of water (ice). when we give temperature to the body, its molecule or atom absorbs thermal energy and vibrate about their mean position. Amplitude of vibration get increases as we go on increasing temperature and for higher temperature force of attraction between molecules gets weaker. Hence for higher temperature, due to weaken the force of attraction between molecule, solid goes into liquid state. and further increase in temperature liquid goes into gaseous state.

Hence option D is correct.

To know more about Temperature :

https://brainly.com/question/11464844

#SPJ3.


Related Questions

What is the change in the internal energy of a system that does 600 joules of work and absorbs 800 joules of heat?
A. -200 J
B. -1,400 J
C. 1,400 J
D. 200 J​

Answers

[tex]\huge{\color{red}{\fbox{\textsf{\textbf{Answer}}}}} [/tex]

200J

Explanation:

Change in the internet energy = Heat aborsbed - work done

800 - 600

200 J

Answer:

D. 200J

Explanation:

A circular loop of wire is placed in a uniform magnetic field directed out of the page. Suddenly the magnetic field disappear . What is the direction of the induced current in the loop?

Answers

Hi there!

Counterclockwise.

If a loop of wire is placed in a magnetic field directed out of the page that disappears, that means that the magnetic flux out of the page through the loop has decreased.

The loop will try to oppose this change in the magnetic flux, so an induced current that produces an additional magnetic field out of the page will occur to make up for the decrease in the magnetic flux.

Using the magnetic right-hand rule, the current in the loop would need to be traveling in the counterclockwise direction in order for the produced magnetic field to be directed out of the page inside the loop.

The brightness of a star decreases by the square of the distance. This is known as:.

Answers

Answer:

inverse-square law.

Explanation:

Since the area increases as the square of the distance, the brightness of the light must decrease as the inverse square of the distance.

hope this helped you!

Can someone please answer this, ill give you brainliest Would be very appreciated.

Answers

Answer:

C. Surface tension

What property of water allowed the paperclip to stay on the top of the water?

Solution:

Surface Tension

Explanation:

The strong surface tension enables the paper clip float on the water, despite its much higher density which is caused by the cohesive forces between liquid molecules.

Question 7.
When can a mouse have the same momentum as an elephant?
د ن ه ه
A. when the mouse has a large velocity and the elephant has a small velocity
when the mouse has a small velocity and the elephant has a large velocity
a mouse cannot have the same momentum as an elephant
D. when they both have the same velocity

Answers

A mouse have the same momentum as an elephant when the mouse has a large velocity and the elephant has a small velocity. The correct option is A.

What is momentum?

The momentum is the product of the mass of the object and its velocity.

Mouse has mass very less than the elephant. In order to make their momentum same, the velocity of the mouse must be greater than the elephant.

Mm x Vm = Me x Ve

A mouse have the same momentum as an elephant when the mouse has a large velocity and the elephant has a small velocity.

Thus,  the correct option is A.

Learn more about momentum.

https://brainly.com/question/24030570

#SPJ1

I need help with my homework please? I will give a lot of points and a brainlist.

Answers

#1

True

All metals attract magnets

#2

Yes true

Away from magnetic field if you place something it won't attract that

#3

False

Its only possible in case of electromagnetic force fields .

#4

False

Electromagnetic force field

#5

True

an airplane carrying out a parcel drops releases a parcel while travelling at a steady speed of 90 m/s at an altitude of 200 m. caculate a)the time taken between the parcel leaving the airplane and it striking the ground b)the horizontal distance travelled by the parcel in this time. c)the speed at which the parcel strikes the ground

Answers

a)The time taken between the parcel leaving the airplane, and it's striking the ground will be 6.38 second

c)The speed at which the parcel strikes the ground will be 62.64 m/sec.

What is speed?

Speed is defined as the rate of change of the distance or the height attained. it is a time-based quantity. it is denoted by U for the initial speed while V for the final speed. its SI unit is m/sec.

The given data in the problem is;

Steady speed (V)= 90 m/s

Altitude (h) = 200 m

Time taken (t)=?

horizontal distance travelled(d)=?

Striking speed(V)=?

The striking speed is;

[tex]\rm V^2=U^2+2gh \\\\ V=\sqrt{2gh} \\\\V=\sqrt{2\times 9.81 \times 200} \\\\ V= \sqrt{3924} \\\\ V=62.64 \ m/sec[/tex]

The time taken is found as;

[tex]\rm H = ut + \frac{1}{2} gt^2 \\\\ 200=0+ \frac{1}{2} \times 9.81 \times t^2 \\\\ t=6.38 \ sec[/tex]

Hence, the time taken between the parcel leaving the airplane, and it's striking the ground will be 6.38 second

To learn more about the sped, refer to the link;

https://brainly.com/question/7359669

#SPJ1

What is the water division of earth

Answers:
Ocean water 1% freshwater frozen as ice 90% and freshwater9%
Ocean water 47% freshwater 50% and freshwater frozen as ice 3%
Ocean water 97.5% Freshwater frozen as ice 1.5% and freshwater 1%
Ocean water 33.33% freshwater frozen as ice 33.33% and Ocean water 33.33%

Answers

Answer:

the third option

Explanation:

Answer:

Ocean water 97.5% Freshwater frozen as ice 1.5% and freshwater 1%

Explanation:

what is the wavelength of a 28Hz periodic wave at 10 meters per second?

Answers

AnswerAnswerAnswerAnswerAnswer:0.3571m

Explanation:

While doing the dishes, you drop an iron skillet that’s very hot (200° C or more) into a sink containing a few inches of water at room temperature. Assume the volume of water has about the same mass as the skillet. It’s found that the increase in temperature of the water is much less than the loss in temperature experienced by the skillet. As a matter of fact, after a minute or two, the water feels only slightly warmer than before the skillet was added. Use the space to write a brief explanation of why this is true.

Answers

Remember the fact that every object has a specific amount of latent heat of vaporization

The specific heat capacity of iron and water are different

They may have same mass but not same specific heat capacitySo same amount of temperature can't create same amount of heat .Also water is liquid so heat get transmitted through out the solution.

find the resistance of a multiplier connected with milliammeter of resistance 10 ohms with a deflection of 10 milliamperes and the voltage of the circuit is 15 volts​

Answers

the answer is 26 because you add

In a billiards game, one player hits the cue ball towards another ball. The cue ball has a mass of 0.1kg and hits the other ball with a velocity of 2m/s. If the collision is completely elastic and the cue ball travels with a velocity of 0.8m/s after the collision, what is the mass and velocity of the other ball?​

Answers

Answer:

  3/70 kg ≈ 0.04286 kg

  2.8 m/s

Explanation:

In a perfectly elastic collision, the total momentum of the system is constant, and the difference in velocities changes sign.

We assume the other ball is at rest initially, and that the collision is "head-on." That is, final velocities are in the same direction as the initial velocity of the cue ball. We further assume no energy loss, and that the balls do not rotate.

__

initial momentum

Assuming the ball being hit is initially at rest, it contributes no momentum to the system. The total momentum is ...

  (0.1 kg)(2 m/s) = 0.2 kg·m/s

__

initial velocity difference

If the cue ball has velocity v1 and the hit ball has velocity v2, the initial difference of velocities is ...

  v1 -v2 = 2 m/s -0 m/s = 2 m/s

__

final velocity difference

After the collision, we must have ...

  v1 -v2 = -2 m/s . . . . the velocity difference changes sign

  v2 = v1 +2 m/s = 0.8 m/s +2 m/s

  v2 = 2.8 m/s

The velocity of the other ball is 2.8 m/s after the collision.

__

mass of the other ball

The total momentum after the collision is the same as before, so we must have ...

  m1·v1 +m2·v2 = initial momentum

  (0.1 kg)(0.8 m/s) +(m2)(2.8 m/s) = 0.2 kg·m/s

  m2 = (0.2 kg·m/s -0.08 kg·m/s)/(2.8 m/s) = (0.12/2.8) kg = 3/70 kg

The mass of the other ball is 3/70 ≈ 0.04286 kg.

Unit Test Review
Active
1
2
3
Which statement best describes heat and thermal energy?
O They are different words for the same thing.
O They represent different concepts.
O Heat is what happens when thermal energy stops moving between substances.
O Thermal energy is what happens when heat moves between substances.

Answers

Answer:

option B...

they represent different concept...

i hope this will answer your question

If you want to minimize the amount of current drawn from the solar panel supply, what resistor value should you use for the line resistor (Rline) from your inventory of resistors and why

Answers

To minimize the energy loss due to over heating of the solar panel use resistors in parallel arrangement.

Energy loss in a circuit

The amount of energy dissipated in a circuit is determined using the following formulas;

P = I²Rt

where;

I is the currentR is resistancet is time

Thus, to minimize the energy loss due to over heating of the solar panel use resistors in parallel arrangement.

Learn more about resistors here: https://brainly.com/question/24858512

#SPJ1

When charging a fully depleted battery with a 220/240-volt charging dock, 2023 leaf s can be fully charged in about ________.

Answers

When charging a fully depleted battery with a 220/240-volt charging dock, Nissan LEAF can be fully charged in about 7.5h.

What is battery?

It converts the electro chemical energy to the electrical energy when connected across the two ends of the conductor.

The Nissan LEAF comprises of a standard 120-V charging cable.  In order to charge it fully, we need a 220/240Volts battery. The time take take n to fully charge is 7.5 hours.

Thus, when charging a fully depleted battery with a 220/240-volt charging dock, Nissan LEAF can be fully charged in about 7.5 h.

Learn more about battery.

https://brainly.com/question/21567100

#SPJ1

A boat moves 3.0 km due north and then moves 1.0 km due south. The time for this trip is half an hour. What is the average velocity of the boat

Answers

The average velocity of the boat given the data from the question is 6.32 Km/h

What is velocity?

Velocity is defined as the rate of change of displacement with time. Mathematically, it is expressed as

Velocity = displacement / time

How to determine the resultant displacementDisplacement 1 (d₁) = 3 KmDisplacement 2 (d₂) = 1 KmResultant displacement (D) =?

D² = d₁² + d₂²

D² = 3² + 1²

D² = 9 + 1

D² = 10

Take the square root of both sides

D = √10

D = 3.16 Km

How to determine the average velocityResultant displacement = 3.16 KmTime = 1/2 hour = 0.5 hourAverage velocity =?

Average velocity = resultant displacement / time

Average velocity = 3.16 / 0.5

Average velocity = 6.32 Km/h

Learn more about velocity:

https://brainly.com/question/3411682

#SPJ1

What are the basic ingredients needed to form a hurricane? (Select all that apply.)

Question 1 options:

warm water


moist air


high pressure


strong winds that come together from different directions

Answers

strong winds that come together from different directions

Which pair of atoms will form a covalent bond? a. One atom of Fluorine and two atoms of Oxygen
b. two atoms of lithium and one atom of chlorine
c. one atom of magnesium and two atoms of sulfur
d. three atoms of potassium and one atom of phosphorus

Answers

Answer:

a.one atom of fluorine and two atoms of oxygen

Explanation:

hope it help

What's the potential energy for
m= 0.5kg
g=98.1
h=1.5​

Answers

Answer:

7.36 j

Explanation:

PE = m g  h    so just mutiply the given values   .5 * 9.81 *1.5 = 7.36 j

  (assuming 1.5 is in meters)

What type of monomers make up liquids

Answers

Answer:

Carbohydrates - monosaccharides.

Lipids - glycerol and fatty acids.

Nucleic acids - nucleotides.

Proteins - amino acids.

Explanation:

where are most of the comets in our solar system found?

Answers

Answer:

some far beyond the edge of the solar system called the Oort Cloud, and some beyond Neptune in a region called the Kuiper Belt.

Explanation:

Hopefully this helps

What happens to the light when it passes through a converging lens?
a) the light spreads apart
b) the light meets at a point
c) the light is reflected backwards

Answers

Answer:

B

Explanation:

the lines WILL meet at a point after crossing focal point

. A 6 ohm resistor is connected to a 15 volt battery.
a. What is the current in the circuit?
b. How much heat is produced in 10 minutes?

Answers

Answer:

2.5A , 22500 JOULE

Explanation:

Resistance (R)= 6 ohm

Voltage (V) = 15 volt

a)

Current (I) = ?

From ohm's law,

V=IR

15 = 6*I

I = 2.5 A

b)

time(t) = 10min = 600 second

heat energy (Q) = ?

from Joule's law of heating,

Q = I²*R*t

Q = 2.5² *6*600

Q = 22500 Joule

hence, heat energy produced is 22500 joule.

Why is nuclear energy able to be used for practical purposes? the reactions are controlled to regulate energy output. the reactions are uncontrolled for maximum energy output. all of the products are fed back into the reaction to keep it going. all of the products are immediately removed to inhibit more reactions.

Answers

Nuclear energy is is used practically for many energy requirements because the reactions are controlled to regulate energy output

What is nuclear energy?

Nuclear energy is the energy reaelesed during nuclear relations.

Nuclear energy is a clean form of energy which is available in enormous amounts.

Nuclear energy is is used practically for many energy requirements because the reactions are controlled to regulate energy output.

Therefore, the control of nuclear reactions make the use if nuclear energy possible.

Learn more about nuclear reactions at: https://brainly.com/question/25387647

#SPJ4

Answer: A or the reactions are controlled to regulate energy output.

Explanation: did it on edge!

Transverse waves travel at in a string that is subjected to a tension of if the string is long, what is its mass?

Answers

The mass of the string is 0.515 kg.

Calculations and Parameters:

Given that:

Tension= 60.5NLength of string= 15.9mv= 43.2 m/sm=?

To solve for the mass of the string,

v=√(T/ρ) ,(v=43.2m/s , T=60.5N , L=15.9m )43.2= √(60.5/ρ)60.5/ρ= 1866.24ρ= 0.032418

Therefore, the mass would be[tex]15.9*0.03242= 0.515448= 0.515[kg][/tex]

Read more about transverse waves here:

https://brainly.com/question/15531840

#SPJ4

What does a capacitor do in a circuit?

Answers

Capacitors are widely used in electronic circuits for blocking direct current while allowing alternating current to pass. In analog filter networks, they smooth the output of power supplies. In resonant circuits they tune radios to particular frequencies.

grrr i don't have much time, help please T^T
will give brainlist and points! I'LL OWE YOU FOREVER​

Answers

Answer:

2. ( b ) zero

3. ( c ) 10 s

4. Uniform then decreasing

Explanation:

2.

Since the motion is uniform, initial and final velocity will be 0, hence acceleration will be zero.

3.

Initial velocity ( u ) = 5 m/s

Final velocity ( v ) = 35 m/s

Acceleration ( a ) 3 m/s^2

To find : Time ( t )

Formula : -

t = v - u / a

 = 35 - 5 / 3

 = 30 / 3

t = 10 s

Answer:

See below ~

Explanation:

Q2

The uniform circular motion in the movement of object in a circular path with fixed and perpendicular on the direction of the motion acceleration.

d

Q3

Substitute the values in : v = u + at35 = 5 + 3t3t = 30t = 10s (c)

Q4

The vertical component for a projectile by acute angle on the horizontal axis changes from decreasing then increasing velocity.

d

Can someone please answer this, ill give you brainliest Would be very appreciated.

Answers

Answer:

See below ~

Explanation:

What is happening to each event as the climate changes? Temperatures are increasing, carbon dioxide levels are increasing, the pH of the ocean is decreasing, sea levels are increasing, and the amount of sea ice is decreasing.

Here are orders of answers from start

IncreasingIncreasingDecreasingincreasingdecreasing

The main reason behind these situations is global warming

The emmison of carbon dioxide has increased a lot which is getting harmful day by day

i. Calculate the average velocity of a motor cycle that travels 72km/hr 20 seconds.​

Answers

The motorcycle's average velocity will be 20 m/sec. The ratio of the overall distance traveled to the total time taken by the body is the average velocity.

What is average velocity?

The average velocity is the ratio of the total distance traveled to the total time taken by the body. Its unit is m/sec.

V= 72km/hr =20 m/sec

Total distance travelled by the  motorcycle;

D= v ×t

D=(20 m/sec)×20 sec

D=400 m

The average velocity is:

[tex]\rm v_{avg}=\frac{d_{total}}{t_{total}} \\\\ \rm v_{avg}=\frac{400}{20} \\\\ v_{avg}=20 m/sec[/tex]

Hence,the motorcycle’s average velocity will be 20 m/sec.

To learn more about the average velocity, refer to the link;

brainly.com/question/862972

#SPJ1

Throughout this lesson, you learned about the lives and contributions of key scientists in this area of physics. Create a timeline that ties them all together. The timeline does not need to be highly detailed, but it should do the following:

Include at least the four major scientists covered in this unit: Oersted, Ampère, Faraday, and Tesla.
Include key contributions of each scientist and provide a year, if possible, for those contributions.
Note any relationships among these and other scientists, especially if one developed something based on the work of another.
Arrange the scientists chronologically by their first key contribution, not by their birth date.

Answers

Oersted -Electromagnetic theory in 1820(July).

Ampere - Static needle -a component of galvanometer in 1820 (September).

Faraday - Electromagnetic induction in 1831.

Tesla - First Alternating current motor and transmission system in 1882.

What is magnetic field?

The region of space where a charged object moves in the direction of magnetic force and induces current.

Thus, the scientist are arranged chronologically with their key inventions.

Learn more about magnetic field.

https://brainly.com/question/14848188

#SPJ1

Other Questions
What is the length of line segment b c? round to the nearest tenth. 14.3 in. 20.5 in. 21.3 in. 22.6 in. In the dictator film What did Chaplin want to tell us by having the "double cross" as the symbol of hynkel's political party? Which of the following correctly relates the porosity, permeability and production of a well in an aquifer?Decreasing porosity and increasing permeability lead to increased production in an aquifer.Decreasing porosity and decreasing permeability lead to increased production in an aquifer.Increasing porosity and increasing permeability lead to increased production in an aquifer.Increasing porosity and decreasing permeability lead to increased production in an aquifer.100 points A sample of argon (Ar) gas has a volume of 7.31 L at a pressure of735 mm Hg and a temperature of 45 C. Determine the volume inliters when the temperature changes to 55 C and the pressurechanges to 325 mm Hg. What is n=15[5(2)n1] equal to? What is the slant height, s, of the triangular prism?Round your answer to the nearest tenth.Image below How did America become independent from the Britain? . If you sampled 2000 people, how many would you expect to have BP> 160? Give your answer to the nearest person. Note: I had a bit of an issue encoding rounded answers, so try rounding both up and down if there's an issue! fine the value please, giving BRAINLIEST 170 over 360 simplify -3/5, 6/5, -12/5 whats the next term of the geometric sequence? Meaning of bullion in I SELL A DOG? At the beginning of the story, how does Framton Nuttelfeel about being at the Sappleton home? riddle- What can you catch, but not throw? George Vaillant concludes that _____ is a time for detecting parental flaws and discovering the truth about childhood. adolescence middle adulthood old age late adulthood The price of a notebook is 20% less than the price of a book. Bywhat percent is the price of the book higher than the price of thenotebook?HELP PLEAAAAAAAAAAAASEEEEEEEEEEEEE HELP!!!!!!!!! | In your own words, describe when you should use area, and when you should use volume in calculating the amount of space an object occupies. I need help, question is in image. Troy Engines, Limited, manufactures a variety of engines for use in heavy equipment. The company has always produced all of the necessary parts for its engines, including all of the carburetors. An outside supplier has offered to sell one type of carburetor to Troy Engines, Limited, for a cost of $35 per unit. To evaluate this offer, Troy Engines, Limited, has gathered the following information relating to its own cost of producing the carburetor internally: Per Unit 16,000 Units per Year Direct materials $ 16 $ 256,000 Direct labor 12 192,000 Variable manufacturing overhead 3 48,000 Fixed manufacturing overhead, traceable 3* 48,000 Fixed manufacturing overhead, allocated 6 96,000 Total cost $ 40 $ 640,000 *One-third supervisory salaries; two-thirds depreciation of special equipment (no resale value).Required:1. Assuming the company has no alternative use for the facilities that are now being used to produce the carburetors, what would be the financial advantage (disadvantage) of buying 20,000 carburetors from the outside supplier?2. Should the outside suppliers offer be accepted?3. Suppose that if the carburetors were purchased, Troy Engines, Ltd., could use the freed capacity to launch a new product. The segment margin of the new product would be $200,000 per year. Given this new assumption, what would be financial advantage (disadvantage) of buying 20,000 carburetors from the outside supplier?4. Given the new assumption in requirement 3, should the outside suppliers offer be accepted? . Find the area of a circle with acircumferenceof 11( 3.14 )feel?