Answer:
98.367 atm
Explanation:
For this, you must use the equation PV=nRT. Since you are looking for P, rearrange the equation so that P= nRT/V.
Now collect the information you have:
n (mol) = 84.5
R (ideal gas constant to find atm not every case) = .08206
T (temperature) = 305 K (always convert to kelvin)
V (volume in liters) = 21.5
Now Use P= (85.5 mol)×(.08206)×(305 K)/(21.5) to get your answer in atm
What type of intermolecular bond may form between na and br
Answer:
Ionic
Explanation:
Na is a metal and Br is a non-metal. Makes an ionic bond. Hope that helps
This atom tends to gain an electron in its outer shell so that there are a total of 8 electrons.
oh its a Chlorine isn't it....
it's electronic configuration is
2,8,7
so to make it 8 in its outermost shell it should gain 1 electron...
2.What two factors must be held constant for density to be a constant ratio?
Answer:
Temperature and Pressure
Explanation:
Temperature and pressure cause change in volume.
So any change in volume will alter the ratio of density as given by equation of density.
Density = mass/ volume
Change in volume will alter the ratio.
Kindly mark it branliest if the answer is little bit satisfying.
The two (2) factors which must be held constant for density to be a constant ratio are:
I. The temperature of a sample or physical substance.
II. The pressure around the sample or physical substance.
Density can be defined as mass all over the volume of of a sample or physical substance.
Basically, density is mass per unit volume of of a sample or physical substance.
Mathematically, the density of a of a sample or physical substance is given by the formula;
[tex]Density = \frac{Mass}{Volume}[/tex]
The density of a sample or physical substance is directly proportional to pressure and inversely proportional to temperature.
This ultimately implies that, an increase in pressure with temperature being constant would cause an increase in density and vice-versa.
Conversely, a decrease in temperature with pressure being constant would cause an increase in density and vice-versa.
In conclusion, a change in volume of a substance is caused by both temperature and pressure.
Read more: https://brainly.com/question/18320053
During recrystallization, why is it necessary to cool the solution slowly?
answer:
the reason is to ensure more solute is dissolving as it cools down. it is important to do it slowly because water will be sucked into buchner flask by a partial vaccum through the rubber tubing and be able to arrange molecules.
Cual es el número maximo de electrones en el subnivel 4s
Answer:
Translated < what is the maximum number of electrons in the sublevel 4s?
answer 32 electrons
the following reaction gives a product with the molecular formula c4h8o2. draw the structure of the product.
The following reaction gives a product with the molecular formula C₄H₈O₂. The diagram of the structure of the product can be seen in the image attached below.
The reaction between C₂H₂(ONa)₂ and C₂H₄Br results in the formation of the product C₄H₈O₂ and 2NaBr.
This reaction undergoes an SN₂ mechanism since there is no stable carbocation formed. In the reaction -O⁻Na⁺ attacks the ortho position in C₂H₄Br to form C₄H₈O₂.
In SN₂ mechanism is a nucleophilic substitution reaction where one bond is formed while another one is broken simultaneously.
The mechanism for the reaction can be seen in the image attached below.
Learn more about nucleophilic substitution reaction here:
https://brainly.com/question/4699407?referrer=searchResults
Investigation of ions and Separation of Mixtures 1- Propose systematic schemes for the identification of the following salts with respect to their anions and cations: NaCl, KNO3, and CuSO4?
The cations and anions can be identified using cataloged reactions schemes. For instance, the copper II ion can be identified by reaction with sodium hydroxide.
The sodium cation is easily identified by flame test. sodium imparts a yellow color to a flame. The chloride ion is identified by the use of a mixture of HNO3/AgNO3 solution. The color of the precipitate shows which halide ion is present. A white precipitate indicates the presence of the chloride ion.
The potassium cation is also identified by flame test. The ion imparts a lilac color to flame. Addition of acidified FeSO4 solution is used to confirm the presence of the nitrate ion. Formation of a brown ring is a positive test for the nitrate ion.
For CuSO4, the presence of copper II ion can be confirmed using dilute NaOH. If a light blue precipitate is formed which dissolves in excess NaOH then the copper II ion is confirmed. The presence of the sulfate ion is confirmed using a solution of barium nitrate and dilute nitric acid. Formation of a white precipitate is a positive test for the sulfate ion.
Learn more: https://brainly.com/question/5624100
A test tube is filled with water and a green plant called elodea.
Answer: The bubbles produced are most likely due to oxygen.
Explanation:
Photosynthesis is a phenomenon in which green plants containing chlorophyll use sunlight as a source of energy to convert carbon dioxide and water to form glucose and oxygen.
The balanced chemical reaction for photosynthesis is:
Someone pls help me I will make you brain
Answer:
I believe your answer is B.) I hope this helps.
Help! Will go be brianleist
Answer:
d
Explanation:
Answer: c
Explanation:
Someone pls help me I will make you brain
Answer:
A
Explanation:
Is this statement true or false?
A chemical reaction is balanced when the number of atoms of each element is the same for both the reactants and the products.
true
false
Answer:
truetysm
tysm
tysm dear
calculate the mass required to prepare 2.5 L of 1.0 M NaOH solution. Given that the molar mass for NaOH is 40 g/mol.
Answer:
The required mass to prepare 2.5 L of 1.0 M NaOH solution is 100 g
Explanation:
We do this by preparing the equation:
Mass = concentration (mol/L) x volume (L) x Molar mass
Mass = 1.0 M x 2.5 L x 40 g/mol
Mass = 100 g
Answer:
[tex]100\; \rm g[/tex] of [tex]{\rm NaOH}\; (s)[/tex] would be required.
Explanation:
The quantity of solute in a solution of concentration [tex]c[/tex] and volume [tex]V[/tex] would be [tex]n = c \cdot V[/tex].
It is given that volume [tex]V = 2.5\; \rm L[/tex] for the solution in this question. It is also given that the concentration of the [tex]\rm NaOH[/tex] solute in this solution is [tex]c = 1.0\; \rm M[/tex], which is the equivalent to [tex]c = 1.0\; \rm mol \cdot L^{-1}[/tex].
Apply the equation [tex]n = c \cdot V[/tex] to find the quantity of [tex]\rm NaOH[/tex] in this solution:
[tex]\begin{aligned}n &= c \cdot V \\ &= 1.0\; \rm mol \cdot L^{-1} \times 2.5\; \rm L \\ &= 2.5\; \rm mol\end{aligned}[/tex].
Multiply the quantity [tex]n[/tex] of [tex]\rm NaOH[/tex] in this solution with the formula mass [tex]M[/tex] of [tex]{\rm NaOH}\![/tex] to find the corresponding mass:
[tex]\begin{aligned}m &= n \cdot M \\ &= 2.5\; \rm mol \times 40\; \rm g \cdot mol^{-1} \\ &= 100\; \rm g\end{aligned}[/tex].
Thus, this solution would contain [tex]100\; \rm g[/tex] of [tex]{\rm NaOH}[/tex].
It would thus take [tex]100\; \rm g[/tex] of [tex]{\rm NaOH}[/tex] to prepare this solution.
does the character of a bond become more covalent or ionic when the difference in electronegativity of the bonded atoms increases?
Answer:
The grater the difference in electronegativity, the more ionic the bond
Which term describes the total internal energy of a material due to the motion
of its particles?
A. Nuclear energy
B. Thermal energy
Ο Ο Ο
C. Electrical energy
D. Chemical energy
Answer:
Thermal Energy
Explanation:
Thermal energy is the total internal kinetic energy of an object due to the random motion of its atoms and molecules They consist of the sum of the internal kinetic energy (thermal energy) and the potential energy of an object.
Answer:
B. thermal energy.
Thermal energy or heat is due to the movement or vibrations of tiny particles such as atoms and molecules.
Explination:
Einstein proved the existense of atoms through his observation of Brownian Motion (the random movement of a dust particle, caused by it bumping into atoms).
draw the product of the sn2 reaction and indicate stereochemistry. write the inorganic product in the answer palette.
SN2 reaction proceeds with inversion of configuration at the reacting carbon atom. The product has a different configuration at this carbon atom from the product.
SN2 reaction is a short form for substitution nucleophilic bimolecular reaction. It is a synchronous reaction in which the leaving group departs at the same time as the nucleophile attacks in a single transition state.
Recall that SN2 reaction proceeds with inversion of configuration hence the product has a different configuration at the reacting carbon atom from the product. The inorganic product in this reaction is HI. The organic product is shown in the image attached to this answer.
Learn more: https://brainly.com/question/10079361
Element X has two isotopes. One has a mass of 45.0 amu and is 45.0% abundant. The other has a mass of 47.0 amu and is 55.0% abundant. What is the average atomic mass of element X?*
0 46.1 amu
O 36.5 amu
0 43.8 amu
0 48.9 amu
The average atomic mass of element X that has two isotopes (one of 45.0 amu mass and 45% abundance and the other of 47.0 amu mass and 55.0% abundance) is 46.1 amu (option 1).
The average atomic mass (A) of element X can be calculated as follows:
[tex] A = m_{1}\%_{1} + m_{1}\%_{1} [/tex] (1)
Where:
m₁: is the mass of isotope 1 = 45.0 amu
m₂: is the mass of isotope 2 = 47.0 amu
%₁: is the abundance percent of isotope 1 = 45.0 %
%₂: is the abundance percent of isotope 1 = 55.0 %
Hence, the average atomic mass is (eq 1):
[tex] A = m_{1}\%_{1} + m_{1}\%_{1} = 45.0 amu*45.0\% + 47.0 amu*55.0\% = 45.0 amu*0.45 + 47.0 amu*0.55 = 46.1 amu [/tex]
Therefore, the average atomic mass of element X is 46.1 amu (option 1).
Find more about atomic mass here:
https://brainly.com/question/3187640?referrer=searchResultshttps://brainly.com/question/17338557?referrer=searchResultsI hope it helps you!
how can you tell whether a substance is a binary compound
Given what we know, we can confirm that a compound will be a binary compound if it contains both a metal and a non-metal element.
Why does this combination form binary compounds?The reason for this is that metals will be able to donate electrons thanks to their chemical properties. Meanwhile, non-metal elements will seek to receive electrons to become more stable.For these reasons, metals and non-metals will come together to create covalent bonds, and thus, binary compounds.Therefore we can confirm that since a metal will donate its electron to a non-metal element to form covalent bonds, we will know if the compound is binary or not based on the presence of a metal and a non-metal.
To learn more about metals visit:
https://brainly.com/question/948126?referrer=searchResults
eview
In a population, exponential growth
can lead to a lack of resources,
which causes the population
numbers to decline. This is an
example of:
A. a positive feedback loop
B. a negative feedback loop
C. the first law of thermodynamics
D. the second law of thermodynamics
о
Exponential growth can lead to decreasing the population size, which represents an example of a NEGATIVE feedback loop. This control mechanism (negative feedback) is common in nature.
Negative feedback is a homeostatic self-regulatory process by which the output of a given system is fed back in order to reduce its internal fluctuations.
In a negative feedback, an amplified output from the system (e.g., in this case, a sudden increased population size) leads to its self-inhibition.
This control mechanism (negative feedback loop) helps to maintain the homeostatic balance of the entire system in order to reach a set point.
Learn more in:
https://brainly.com/question/11312580
PLEASE HELP I BEG
Q2 answer in one word
1.two important properties of any sound
2.time taken by a vibrating body to complete one vibration
3. vibration of frequency higher than 20000 Hz
Answer:
1.Velocity and pitch
2.The unit of vibration is hertz. The number of oscillations of an oscillating body per second is known as frequency. Complete step by step answer: The time taken by a vibrating body to complete one vibration is time period.
3.Frequencies above 20,000 Hz are known as ultrasound.
Because only certain size electron orbits are allowable, the frequency and energy of the electron is ___ .
Because only certain size electron orbits are allowable, the frequency and energy of the electron is quantized
According to the Bohr model of the atom, an electron moves from a lower to a higher energy level when it absorbs energy. This energy is released when the electron returns to ground state.
According to the Bohr model, only certain size electron orbits are allowable hence the frequency and energy of the electron is quantized.
Learn more: https://brainly.com/question/25150590
what is the chemical formula for the most common fragment of acetic acid?
Answer:
the scientific formula is C2H4O2
Explanation:
The cleavage of the compounds resulted in the fragments with varying stability. The most common fragment of acetic acid is [tex]\rm C_2H_4O_2^+[/tex].
What are the most common fragments?The common fragments in the molecular compound are the species that result in the neutral ions adn electrons with the cleavage of the bonds.
Acetic acid is a weak acid in nature, and is composed of the carbon, hydrogen and oxygen elements.
The cleavage of the species in the acetic acid spectrum resulted are, [tex]\rm [COOH^+],\;[CH_3CO^+],\;[CH_2CO^+],\;[HCO^+],\;[CO^+],\;[CH^3^+][/tex].
The species, with the highest m/z ration, has been the most common fragment of the acetic acid. The m/z ratio of the following species is given in the table attached.
From the table, the highest ratio for the stability has been found with [tex]\rm C_2H_4O_2^+[/tex]. Thus, the most common fragment of acetic acid is [tex]\rm C_2H_4O_2^+[/tex].
Learn more about the most common fragment, here:
https://brainly.com/question/2863516
write name of the functional group
Answer:40=6*6(6+5)8x42
Explanation: so yea
viết pthh xảy ra khi oxi phản ứng với kim loại K, Mg, Al
Answer:
nnnnnnnnnnnnnnnnnnnnnn
Explanation:
jhhhhhhhhhhhhhhhhbhhhh
Examine the models shown above.where is potential energy the greatest
Answer:
A
Explanation:
Because it is the greatest
for the sn1 reaction, draw the major organic product, identify the nucleophile, substrate, and leaving group, and determine the rate limiting step.
C4H9OH is the substrate, Br- is the nucleophile and H2O is the leaving group.
In an SN1 reaction, the rate limiting step is the formation of the carbocation. The carbocation is formed as water which is the leaving group departs. After the leaving group departs, the nucleophile (Br-) attacks to yield the major organic product. The protonation of the -OH group is the first step in the reaction.
It then follows that, C4H9OH is the substrate, Br- is the nucleophile and H2O is the leaving group.
Learn more: https://brainly.com/question/22824409
The speed of light is 300,000,000 m/s. What is the frequency of a wave with a wavelength of 6 meters?
Answer:
50,000,000 Hz
Explanation:
Rearrange the formula:
wave speed = frequency × wavelength → frequency = wave speed ÷ wavelength
wave speed = 300,000,000m/s
wavelength = 6m
Substitute in the values:
frequency = 300,000,000 ÷ 6
frequency = 50,000,000 Hz
Hope this helps!
how many electrons can occupy a filled 3rd energy level
Answer:
The third energy level can actually hold up to 18 electronswhich particles are in the nucleus of an atom of neon-20?
where on the periodic table are noble gases found?
Answer:
The farthest to the right of the Periodic Table. They have 8 valence electrons. Some Noble gases are Helium, Neon, and Argon.
