How many grams of copper(II) phthalocyanine would be produced by the complete cyclotetramerization of 0.125 moles of phthalonitrile in the presence of excess copper(II) chloride?

Answer: The layers are ordered by density, with the least dense layer on top, and the densest layer on the bottom.

Explanation:

Plato

Explanation:

here's the answer to your question

Answer:

1.HNO₃

Nitric acid is a nitrogen oxoacid of formula HNO3 in which the nitrogen atom is bonded to a hydroxy group and by equivalent bonds to the remaining two oxygen atoms.

2.H₂SO₄

3.CH₄

Methane (US: , UK: ) is a chemical compound with the chemical formula CH4 (one atom of carbon and four atoms of hydrogen). It is a group-14 hydride and the simplest alkane and is the main constituent of natural gas.

4.K₂O

5.AgCl

6.CaCO3

Limestone consists of calcium carbonate, which has the chemical formula CaCO3. Limestone exists in sedimentary and crystalline form.

Explanation:

hello .

Don't Forget To Follow, Brainliest, And Give Me Heart :)

Solution :

A substrate is defined as the chemical species that are being observed in the chemical reaction where the substrate reacts with a reagent and forms a product. It can also be referred to the surface where some other chemical reactions are performed.

Stereochemistry is defined as the study of relative spatial arrangement of the atoms which forms the structure of the molecules and their respective manipulations.

In the context, the products including the stereochemical designations for any chirality centers starting from the  (R)-3-methylhex-1-yne as the substrate are attached below.  

Answer:

Production of some products is highly concentrated in a few countries, China, the leading producer of wheat and ramie in 2013, produces 6% of the world's ramie fiber but only 17% of the world's wheat.

Answer:

Following are the response to the given question:

Explanation:

In the given scenario, When the balance has never been tainted before the KHP is weighted, which can affect the molar concentration of NaOH because its molarity is directly proportional to the weight including its substance. In this question it is the mistake is systemic because it may be corrected by modifying balancing parameters.

Answer:

lower the activation energy needed to start the reaction.

Explanation:

The activation energy is defined as the energy barrier that stands between reactants and products.

An enzyme is a biological catalyst. Catalysts are known to lower the activation energy of a reaction.

Hence, a catalyst lowers the activation energy of the reaction. The lower the activation energy of a reaction, the faster the reaction is expected to be.

Answer:

1.1 × 10²¹ NH₃ molecules

Explanation:

From the given information:

We were being told that the number of the hydrogen (H) atoms present in the sample of NH3 = 3.3 × 10²¹ hydrogen.

However, it signifies that each molecule of ammonia harbors 3hydrogen (H) atoms.

Hence,  the number of  molecules of NH₃ present;

[tex]\mathsf{=\dfrac{3.3\times 10^{21}}{3} \ molecules \ of \ {NH_3}}[/tex]

= 1.1 × 10²¹ NH₃ molecules

Answer:

See explanation and image attached

Explanation:

The reaction of HBr with 1-butene is an addition reaction. The HBr adds across the double bond to yield a saturated halogenoalkane.

In the absence of peroxides, the reaction proceeds in accordance with Markovnikov rule which states that;''the negative part of the addendum, is attached to the carbon atom with the least number of hydrogen atoms attached.'' This occurs in the first reaction shown in the image.

In the presence of peroxides, the reaction proceeds in an anti-Markovnikov manner to yield the product shown in the second reaction.

Answer:

See explanation and image attached

Explanation:

The reaction of (R)-2-chloro-3-methylbutane with potassium tert-butoxide yields a monosubstituted alkene .

Since the base is bulky, the Hoffman product predominates because attack occurs at the less hindered carbon atom to yield the major product as shown.

The alkene reacts with HBr at the secondary carbon atom to yield a carbocation intermediate which is flat and planar. Attack on either face of the carbocation yields a racemic mixture of the (2R) and (2S) products.

Rearrangement of the carbocation to yield a tertiary carbocation gives the 2-bromo-2-methyl butane product as shown in the image attached.

Answer:

2Li(s) + F2(g)→2LiF(s)

Explanation:

Answer:

4 boiling point elevation

Answer:

V₂ = 0.154 Liters

Explanation:

Pressure => P

Volume   => V

Temperature => T

mass (moles) => n

This problem...

P₁ = 1.00 ATM     P₂ = 3.25 ATM

V₁ = 0.500L       V₂ = ?

T₁ =  constant    T₂ = T₁ = constant

n₁ =  constant     n₂= n₁ = constant

P₁V₁/n₁T₁ = P₂V₂/n₂T₂  => V₂ = V₁(P₁/P₂) = 0.500L (1.00ATM/3.25ATM) = 0.154 Liters

The formula of manganese (IV) oxide is MNO2

The formula for manganese (IV) oxide is [tex]MnO_4[/tex]. Therefore, the correct option is A.

A manganese atom is bonded to four oxygen atoms to produce an inorganic compound known as manganese(IV) oxide with the chemical formula [tex]MnO_4[/tex]. It is often referred to as manganese dioxide. The +4 oxidation state of a manganese compound is indicated by the Roman numeral "IV" in the name.

Pyrolusite, a naturally occurring mineral, is a dark brown or black solid consisting of manganese(IV) oxide. Due to its favorable properties, it is often employed in a wide variety of applications. It acts as a catalyst, especially when breaking down hydrogen peroxide. Additionally, it is used to make batteries, ceramics, glass and pigments.

Therefore, the correct option is A.

Learn more about chemical formula, here:

https://brainly.com/question/32018188

#SPJ6

The rate of reaction increases when the temperature increases because the reactant particles collide more often and the correct option is option C.

The rate of reaction refers to the speed at which the products are formed from the reactants in a chemical reaction. It gives some insight into the time frame under which a reaction can be completed.

The rate or speed of reaction can be defined as the change in the concentration of any one of the reactants or products per unit time.

The rate is higher at higher temperatures because colliding particles will have the required activation energy at high temperature and more successful collisions will take place.

Therefore, The rate of reaction increases when the temperature increases because the reactant particles collide more often and the correct option is option C.

Learn more about Rate of reaction, here:

https://brainly.com/question/30546888

#SPJ7

Answer:

The hydrogen sample has a pressure of 0.957 atmospheres.

Explanation:

Let consider that the hydrogen sample behaves ideally, the equation of state for ideal gases is:

[tex]P\cdot V = n\cdot R_{u}\cdot T[/tex] (1)

Where:

[tex]P[/tex] - Pressure, in atmospheres.

[tex]V[/tex] - Volume, in liters.

[tex]n[/tex] - Molar quantity, in moles.

[tex]T[/tex] - Temperature, in Kelvin.

[tex]R_{u}[/tex] - Ideal gas constant, in atmosphere-liters per mole-Kelvin.

If we know that [tex]V = 19.1\,L[/tex], [tex]n = 0.684\,mol[/tex], [tex]T = 326\,K[/tex] and [tex]R_{u} = 0.082\,\frac{atm\cdot L}{mol\cdot K}[/tex], then the pressure of the hydrogen sample is:

[tex]P = \frac{n\cdot R_{u}\cdot T}{V}[/tex]

[tex]P = \frac{(0.684\,mol)\cdot \left(0.082\,\frac{atm\cdot L}{mol\cdot K} \right)\cdot (326\,K)}{19.1\,L}[/tex]

[tex]P = 0.957\,atm[/tex]

The hydrogen sample has a pressure of 0.957 atmospheres.

Answer:

reactivaty

Explanation:

here you go for the answer

Question Completion with Options:

O coarse...few...rapid

O fine...few...slow

O fine...multiple...rapid

O coarse...few...slow

O fine...multiple...slow

Answer:

The choice that best completes the sentence is:

O coarse...few...slow

Explanation:

Transformations near the melting temperature develop coarse grains because few nucleation sites are formed and the rate of the grain growth is usually slow.  This is because of the process that starts with  recrystallization, recovery, and nucleation before growth can occur.  While recrystallization enables the grain to increase in size at high temperature, nucleation gives the grain the energy to irreversibly grow into larger-sized nucleus.

Answer:

CaCl2(aq) + Na2CO3(aq) → CaCO3(s) + 2NaCl(aq)

Reference:

H.W. Hanna and A. Dittmar; Laboratory Manual for General Chemistry, 4th ed.; Morton Publishing Company, Denver, Colorado

Explanation:

The given data is:

The mass of hydrogen is 6.54 kg.

The actual yield is 30.4 kg.

The balanced chemical equation of the reaction is:

[tex]N_2(g)+3H_2(g)<=>2NH_3(g)[/tex]

At first the theoretical yield should be calculated by using the balanced chemical equation:

3 mol. of hydrogen forms ---- 2 mol. of ammonia.

The molar mass of hydrogen is 2.0 g/mol.

The molar mass of ammonia is 17.0 g/mol.

Hence, the above statement can be rewritten as:

6g of hydrogen forms --- 34g of ammonia.

Then,

6.54g of hydrogen forms :

[tex]6.54 kg x 34 g / 6 g\\=37.1 kg[/tex]

% yield = (actual yield /theoretical yield )x 100

=(30.4 kg /37.1 kg )x100

=81.9

Hence, % yield is 81.9.

Answer:

yes

Explanation:

the components of solutions fixed

Answer:

C) 5

Step-by-step explaination:

Benzene has 5 resonance structures.

Answer:

Radical chain initiator

Explanation:

The peroxide here serves as a radical chain initiator. In the field of chemistry the radical initiatives are those substances that are used in industrial processes like polymer synthesis. These initiatives have weak bonds generally and they're mostly used to create free radicals. These radicals are atoms that have odd numbers of electrons. Peroxide is an example of such.

Answer:

A white gelatinous precipitate is observed in each case.

Explanation:

Qualitative analysis in chemistry is mostly used to identify the ions present in a sample by adding certain reagents. The observation after adding the reagent often leads to an inference.

When NaOH is added to a solution containing Zn^2+ in drops, a white gelatinous precipitate is observed.

When NH3(aq) is added in drops to a solution containing Zn^2+, a white gelatinous precipitate is also observed.

Answer:

[tex]\%diff=24.0\%[/tex]

Explanation:

Hello there!

In this case, according to the given information, it turns out firstly necessary for us to set up the van der Waals' equation as shown below:

[tex]p=\frac{RT}{v-b}-\frac{a}{v^2}[/tex]

Thus, we secondly calculate the molar volume as:

[tex]v=\frac{0.8311L}{9.998mol} =0.083L/mol[/tex]

Then, we plug in the entire variables in the vdW equation to get such pressure:

[tex]p=\frac{0.08206\frac{atm*L}{mol*K}*502.7K}{0.08313L/mol-0.03219L/mol}-\frac{1.345L*atm/mol}{(0.08313L/mol)^2}\\\\p=615.2atm[/tex]

And the ideal gas pressure:

[tex]p=\frac{0.08206\frac{atm*L}{mol*K}*502.7K}{0.08313L/mol}\\\\p=496.2atm[/tex]

Finally, the percent difference:

[tex]\%diff=\frac{|496.2atm-615.2atm|}{496.2atm} *100\%\\\\\%diff=24.0\%[/tex]

Regards!

i don't know if this is for school or what. but I believe that your destiny is set out but you do have the power to change it. you decide what path you want to go down with your actions

Answer:

Because it is dissolving and has pigment.  

Explanation:

Answer:

The solvated electron is responsible for a great deal of radiation chemistry. Alkali metals dissolve in liquid ammonia giving deep blue solutions which conduct electricity . The blue colour of the solution is due to ammoniated electrons which absorb energy in the visible region of light.

Answer:

6.4×10¯³ g of O₂.

Explanation:

We'll begin by writing the balanced equation for the reaction. This is given below:

CH₄ + 2O₂ —> CO₂ + 2H₂O

Next, we shall determine the masses of CH₄ and O₂ that reacted from the balanced equation. This can be obtained as follow:

Molar mass of CH₄ = 12 + (4×1)

= 12 + 4

= 16 g/mol

Mass of CH₄ from the balanced equation = 1 × 16 = 16 g

Molar mass of O₂ = 2 × 16 = 32 g/mol

Mass of O₂ from the balanced equation = 2 × 32 = 64 g

SUMMARY:

From the balanced equation above,

16 g of CH₄ reacted with 64 g of O₂.

Finally, we shall determine the mass of O₂ needed to react with 1.6×10¯³ g of CH₄. This can be obtained as illustrated below:

From the balanced equation above,

16 g of CH₄ reacted with 64 g of O₂.

Therefore, 1.6×10¯³ g of CH₄ will react with = (1.6×10¯³ × 64) / 16 = 6.4×10¯³ g of O₂

Thus, 6.4×10¯³ g of O₂ is needed for the reaction.

Answer:

[tex]{ \sf{A. \: 2OH {}^{ - } _{(aq)} +Ca {}^{2 + } _{(aq)} −>Ca(OH) _{2(s)} }}[/tex]

The chemical equations depict a balanced ionic equation is  2OH−+Ca2+−>Ca(OH)2. option A is correct.

An ionic equation is a chemical equation in which the electrolytes in an aqueous solution are expressed as dissociated ions. The ions in aqueous solutions are stabilized by ion-dipole interactions with water molecules

Strong acids, strong bases, and soluble ionic compounds (usual salts) exist as dissociated ions in an aqueous solution, and Weak acids and bases and insoluble salts are usually written using their molecular formulas because only a small amount of them dissociates into ions.

Ag+(aq) + NO3-(aq) + Na+(aq) + Cl-(aq) → AgCl(s) + Na+(aq) + NO3-(aq) is an ionic equation example.

Therefore, the balanced ionic reaction will be  2OH−+Ca2+−>Ca(OH)2. option A is correct.

Learn more about ionic reactions, here:

https://brainly.com/question/13887096

#SPJ5

Answer:

a. 1s2 2s2 2p6 3s2 3p6 4s2 3d 9 - the element is zinc and this is an excited state configuration

b. 1s2 2s2 2p6 3s2 3p6 4s2 3d10 4p6 5s2 4d10 5p6 6s2 4f 14 5d7 -the element is iridium and this is a ground state configuration

Explanation:

The ground state is the lowest energy state of an atom while excite states of Zn atom are higher energy states.

The configuration, 1s2 2s2 2p6 3s2 3p6 4s2 3d 9 applies to zinc atom in excited state while the configuration 1s2 2s2 2p6 3s2 3p6 4s2 3d10 4p6 5s2 4d10 5p6 6s2 4f 14 5d7 applies to iridium atom in ground state.