help pls will give brainiest :)

Answer:

the object melts so the size get smaller

Hi there!

We know that:

Force due to gravity = Mgsinθ

Force due to friction = μMgcosθ

Let the positive direction be directed in the direction of the block's acceleration, which is downward.

Thus:

ΣF = Mgsinθ - μMgcosθ

Solving for acceleration requires diving all terms by the mass, so:

a = gsinθ - μgcosθ

Substitute in given values. (g = 9.8 m/s²)

a = 9.8sin(30) - 0.3(9.8)cos(30) = 2.354 m/s²

F = GMm/r^2

So F is proportional to 1/r^2

F2 = 2700 x ( 1 / 3^2 ) = 300N

Answer: it’s 3 seconds

Explanation:

Answer:

B

Explanation:

3 seconds, hope it helps

Answer:

C: it became an eco-tourism destination

Explanation:

Answer: Its C

Explanation:

Answer:

Table C:

Fan Speed Observations of Position vs. Time Graphs

Low:

The slope is curved and it increases as you go up . The points start off close but they spread out as the time increases.

Medium:

The speed increases quicker than the graph for low speed. The graph is less curved than the one for low speed. Also, the points spread out faster than they did for low speed as the time increases.

High:

The Graph has a smaller curve then the low and medium speed. Also, the points are the furthest apart. The slope is not as spaced out as it was for the rest of the speed graphs.

Explanation:

hope it helps

Variations in the angle of inclination or the mass of the cart could be investigated further to investigate the impact on acceleration and further validate the principles of constant acceleration motion.

Objective: The goal of this lab experiment was to investigate the motion of an item with constant acceleration and to examine its velocity as a function of time.

Materials:

Smooth, inclined plane

Cart or tiny wheeled object

Stopwatches and timers

Measuring tape or meterstick

Procedure:

Set up the inclined plane at a 45-degree angle () to the horizontal surface. Check that the plane is smooth and clear of obstacles.

Place the cart or small wheeled object at the bottom of the inclined plane.

Using a meterstick or measuring tape, determine the height (h) and length (L) of the inclined plane.

Ascertain that the cart is at rest at the starting point, which is located at the bottom of the inclined plane.

As soon as the cart is freed and begins to move, start the stopwatch or timer.

Calculate the time (t) it takes the cart to reach each place along the inclined plane. To ensure reliable data gathering, repeat the experiment numerous times.

Determine the time intervals (Δt) between each position for velocity analysis

Data:

Position (m) Time (s) Time Interval (Δt) (s)

0.0                   0.00           -

0.5                   0.50        0.50

1.0                   0.75        0.25

1.5                    1.10              0.35

2.0                    1.50        0.40

Analysis:

Calculate the average velocity between each position by dividing the position change by the time interval (x/t).

Create a graph that plots average velocity (V_avg) versus time (t).

Results:

A straight line emerges from the graph of average velocity against time, demonstrating that the cart's motion was subject to continuous acceleration along the inclined plane. The slope of the graph reflects the acceleration (a) of the cart.

Conclusion:

The experiment successfully demonstrated motion along an inclined plane with constant acceleration. The graph of average velocity vs time revealed important information about the cart's speed, with a linear relationship suggesting steady acceleration. This experiment emphasizes kinematic principles and the significance of using velocity-time data to understand the motion of objects under constant acceleration.

Hence, variations in the angle of inclination or the mass of the cart could be investigated further to investigate the impact on acceleration and further validate the principles of constant acceleration motion.

To learn more about Acceleration, here:

brainly.com/question/2303856

#SPJ3

Answer:

c

Explanation:

amembers of the group protocista

Answer:

Explanation:

Your numbers seem wonky, so I'll just assume that the initial displacement is a distance A (Amplitude) from the equilibrium position. Spring constant = k

Initial potential energy is

PE = ½kA²

As potential energy and kinetic energy are constantly exchanging in SHM,

the position x where half of the original spring potential exists is found where

½kx² = ½(½kA²)

    x² = ½A²

    x = (√0.5)A

    x ≈ 0.707A

just plug in your actual starting position A

With A = 5.2 cm

x = 3.67695... 3.7 cm

Answer:

52 / 4 = 13 m/s

Explanation:

Answer:

B

Explanation:

B

Answer:

A.It’s not moving.

Explanation:

Position-Time graphs display the motion of a object by showing the changes of velocity with respect to time.

The motion of a car on a position-time graph that is represented with a horizontal line indicates that the car has stopped moving.

A straight line with a positive slope indicates that the car is moving at a constant velocity, and thus the slope is constant. On the other hand, a curve with a changing slope, shows that the velocity is changing.

Answer:

a Penicillin is produced by fungal fermentation.

Explanation:

The industrial production of penicillin (PEN) occurs via fermentation using the filamentous fungus Penicillium chrysogenum

Penicillin G (benzylpenicillin) was first produced from a penicillium fungus that occurs in nature. The strain of fungus used today for the manufacture of penicillin G was created by genetic engineering to improve the yield in the manufacturing process.

Answer:

a fireworks display, a rocket is launched from the ground with a speed of 18.0 m/s and a direction of 51.0∘ above the horizontal. During the flight, the rocket explodes into two pieces of equal mass (see Fig. 8.32). (a) What horizontal distance from the launch point will the center of mass of the two pieces be after both have landed on the ground? (b) If one piece lands a horizontal distance of 26.0 m from the launch point, where does the other piece land?

Answer: Liquid - Lotion

Suspension - Semisolid

Capsule - Solid

Explanation:

Give Brainliest if correct :)

Answer:

D.

For every action there is an equal and opposite reaction.

Explanation:

im doing the same one lol

For every action there is an equal and opposite reaction explains the rocket's motion.

A rocket is indeed a vehicle that accelerates by employing jet propulsion rather than the surrounding air. A rocket engine generates thrust by reacting to high-speed exhaust. Since rocket engines run solely on fuel carried within the vehicle, a rocket may travel in space.

A water rocket uses an amount of water and pressurized air to send a plastic rocket several feet into the air. As the water and air rush out the tail end of the rocket, the rocket shoots into the air. For every action there is an equal and opposite reaction explains the rocket's motion.

Therefore, for every action there is an equal and opposite reaction explains the rocket's motion.

To learn more about rocket, here:

https://brainly.com/question/29070000

#SPJ2

Answer:

mas lalo kang tinatamaran magaral

Answer:

the cardiovascular system

Answer:

c

Explanation:

Answer:

Explanation:

frequency f = 14 cycles/40 s

f = 0.35 cycles/s or

f = 0.35 Hz.

I suspect you are more concerned with the PERIOD of the swing rather than what is superior to it. (How would one even compare?)

T = 1/f = 1/0.35

T = 2.85714285...

T = 2.86 s

The force that will move the box at constant velocity must be a little more than 64 N.

The coefficient of sliding friction is obtained from the formula;

μ= F/R

Where;

F = frictional force

μ = coefficient of sliding friction

R = Normal reaction

It is necessary to note that the force that will move the body must be greater than the frictional force acting between the body and the surface in order to move the body. Hence, the force that will move the box at constant velocity must be a little more than 64 N.

Learn more: https://brainly.com/question/11969651

Answer:

D) 19.8 lbs

Explanation:

1kg in household measurement is equal to 35.274 ounces. 35.274*9=317.466 ounces.

1kg is also equal to 2.205 lbs. 9*2.205=19.8416

9 kg is also equal to 9000 grams, but grams are not a part of the household measurement system

a) 9000 grams. b) 9000 ounces. c) 19.8 ounces. d) 19.8 pounds.

This leaves us with 19.8 lbs

Answer:

sorry I don't know the answer

Answer:

reduce passive stiffness and increase range of movement during exercise.

Explanation:

stretching performed as part of a warm up prior to exercise is thought to reduce passive stiffness and increase range of movement during exercise. in general it appears that is static stretching is most beneficial for athletes requiring flexibility for their sports.

2.34 A

Explanation:

[tex]V = IR \Rightarrow I = \dfrac{V}{R} = \dfrac{117\:\text{V}}{50\:Ω} = 2.34\:\text{A}[/tex]

Answer:

True statements a, b, and c

Explanation:

Answer d is false because in any collision, each object receives the same impulse. Also the momentum of car 1 is mv, while the momentum of car 2 is 0.5m(1.5v) = 0.75mv

The impulse of collision of cars depends on the mass and velocity of the cars. The statements which are true about the car collisions are option a, b, c.

Impulse is a physical quantity expressed as the product of force and time. The change in momentum mΔV is numerically equals to the impulse F t.

If two identical cars with identical speeds collide head on, the magnitude of the impulse received by each car and each driver is the same as if one car at the same speed had collided head on with a concrete wall. Because they have equal mass and velocity.

The bigger acceleration is experienced by the one which have lighter mass thus car 1 with lower mass experience higher acceleration .

The essential safety benefit of crumple zones (parts of the front of a car designed to receive maximum deformation during a head-on collision) is due to their absorbing kinetic energy.

Converting this energy into deformation, and lengthening the effective collision time, thus reducing the average force experienced by the driver.

The momentum change is proportional to the velocity. The one which have higher velocity is having the higher momentum. Thus car 2 have higher velocity. Thus option d is false.

Therefore, the statements which are true are a, b and c.

To find more about impulse, refer the link below:

https://brainly.com/question/904448

#SPJ2

Answer:

Explanation:

trfbehherebgqerfherbfhyqerwbfvhrbhferhgvr

The velocity of the package  after it has fallen for 3.0 s is 29.4 m/s

From the question,

A small package is dropped from the Golden Gate Bridge.

This means the initial velocity of the package is 0 m/s.

We are to calculate the velocity of the package  after it has fallen for 3.0 s.

From one of the equations of kinematics for objects falling freely,

We have that,

v = u + gt

Where

v is the final velocity

u is the initial velocity

g is the acceleration due to gravity

and t is time

To calculate the velocity of the package  after it has fallen for 3.0 s

That means, we will determine the value of v, at time t = 3.0 s

The parameters are

u = 0 m/s

g = 9.8 m/s²

t = 3.0 s

Putting these values into the equation

v = u + gt

We get

v = 0 + (9.8×3.0)

v = 0 + 29.4

v = 29.4 m/s

Hence, the velocity of the package  after it has fallen for 3.0 s is 29.4 m/s

Learn more here: https://brainly.com/question/13327816

The definition of moment of inertia and kinetic energy we can find the results for the questions are:  

          a) The moment of inertia is: I = 32.49 kg m²

          b) The kinetic energy is: K = 509.4 J

a) The moment of inertia is a scalar quantity that has the same function as mass, it is given by

             I = m r²

They indicate that the length of the bar is y₁ = 5.70 m, if the two rigid bars form the square that supports the masses, the distance from the center to the end where each mass is:  

            r = y₁ / 2

             r = 5.70 / 2 = 2.85 m

The moment of inertia of the system is.

         I = 4 m r²

Let's calculate.

        I =4 m 2.85²

        I = 32.49m kg m²

If we assume that the mass of each point particle is:

        m = 1 kg

         I = 32.49 kg m²

b) They ask for the rotational kinetic energy, if the angular velocity is.

           w = 5.60 rad / s

The kinetic energy for rotational motion is.

         K = ½ I w²

Let's calculate.

          K = ½ 32.49 5.60²

          K = 509.4 J

In conclusion with the definition of moment of inertia and kinetic energy we can find the results for the questions are:

          a) The moment of inertia is: I = 32.49 kg m²

          b) The kinetic energy is: K = 509.4 J

Learn more here:  brainly.com/question/14838079

Answer:

60°

Explanation:

It will be equilateral triangle, you can prove with the cosine theorem.

1)P^2=P^2+P^2 - 2×P×P× cos A

2) cos A= P^2 / 2× P^2 = 1/2

cos A = 1/2

A = 60°

If you wrote this question right,it will be solved like this :)