Guys please help this is very important it would be greatly appreciated if you would add the work. Thank you !!

Answer:

C. Momentum is conserved but not kinetic energy.

Explanation:

This case represents an entirely inelastic collision, that is, a collision between the car and the truck that reduces total kinetic energy of the entire system, whereas linear momentum is conserved. Hence, correct answer is C.

Answer:

electric current=ampere(A)

force=Newton (N)

area=metres square(m^2)

power=watt(w)

density=kg/m3 

amount of substance =mole per cubic meter (mol/m3).

volume=cubic meter (m3),

Answer:

thanks for brainlist brother.........

Answer:

Explanation:

By the time the hot water gets to the place where it can be used for heating, it will have lost a great deal of energy to the surroundings.

The way to prevent that from happening is to insulate the pipeline with fiber glass like house insulation. Of course since this is a physics question and not an engineering problem, you could move the power station closer to the houses to be heated.

The use of Insulating Layers with low Conduction Coefficients and radii greater than Critical Radius diminish Losses and gives important Savings in terms of Energy Efficiency.

The main problem of Transportation of Waste Energy through Long Distances is the heat transfer between the Fluid flowing through the Tube and Surroundings. Heat Losses are directly proportional to the Distance travelled by the Fluid.

A possible way to minimize this Problem is to isolate outer surface of Tubes with materials with low Conduction Coefficients. at Critical Radius, in which Heat Losses reach its theoretical Maximum, from which Heat Transfer tends to diminish at greater radii.

According to the Theory of Heat Transfer, the Critical Radius of the Insulating Layer is equal to:

[tex]r_{c} = \frac{k}{h}[/tex] (1)

Where:

Using materials with low Conduction Coefficient minimize Thickness requirements and, therefore, overall costs tends to sink when [tex]r > r_{c}[/tex].

Hence, the use of Insulating Layers with low Conduction Coefficients and Radii greater than Critical Radius diminish Losses and gives important Savings in terms of Energy Efficiency.

Answer:

(a)  333.77 J

(b) 237.85 J

(c) 4763.77 J

(d) 4667.85 J

Explanation:

Temperature of source, TH = 314 K

Temperature of A, Tc = 292 K

Temperature of B, Tc' = 298 K

heat taken out, Qc = 4430 J

Let the heat deposited outside is QH and QH' by A and B respectively.

[tex]\frac{Q_H}{Q_c}=\frac{T_H}{T_c}\\\\Q_H = \frac{4430\times314}{292}=4763.77 J[/tex]

Now

[tex]\frac{Q_H'}{Q_c}=\frac{T_H}{T_c'}\\\\Q_H' = \frac{4430\times314}{298}=4667.85 J[/tex]

(a) Work done for A

W = QH - QC = 4763.77 - 4430 = 333.77 J

(b) Work done for B

W' = QH' - Qc = 4667.85 - 4430 = 237.85 J

(c) QH = 4763.77 J

(d) QH' = 4667.85 J

Answer:

as it hits the ground it's dispersed and this causes it to move in different directions

Answer:

what do u need help with

Explanation:

Calculate the escape velocity for the spacecraft. [G= 6.67×10^-11Nm^2kg^-2, mass of the Earth= 5.97×10^24kg, radius of the Earth= ...

Answer:

The acceleration due to gravity at Pluto is 0.0597 m/s^2.

Explanation:

Length, L = 1 m

10 oscillations in 257 seconds

Time period, T = 257/10 = 25.7 s

Let the acceleration due to gravity is g.

Use the formula of time period of simple pendulum

[tex]T = 2\pi\sqrt{\frac{L}{g}}\\\\25.7 = 2 \times 31.4\sqrt{\frac{1}{g}}\\\\g = 0.0597 m/s^2[/tex]

Answer:

SI unit is an internationally accepted system and have the same value all over the world .

I don't know the importance sotry

Answer:

SI unit is an internationally accepted system that have same value all over the world.

Answer:

is 10³

Explanation:

cuz the formula of KE is 1/2mv²

covert 50g to kg first then plug in the formula

1/2 × 0.05 × 200 = 10³ J

Answer:

Explanation:

in your textbook, they have a formula like this:

g=mass of earth*G/R^2

G=6.67*10^-11

apply to this

we have g=6*10^2*4*6.67*10^-11/(6.4*10^3*1000)^2=9.78

The term that best describes the landform "dip in a mountain range" is C. Syncline.

Syncline is a term to refer to a fold of the Earth's crust caused by the tectonic effects of the earth's dynamics. A synclinal fold is characterized by being a concave fold, that is, in the shape of a U.

According to the above, answers A, B and D are not correct options because they refer to different shapes of the Earth. Therefore, the landform shown is syncline.

Learn more at: https://brainly.com/question/17137827

Answer: C

Explanation: E2022

Answer:

i) The period of the particle is 0.3 seconds

ii) The angular velocity is approximately 20.94 rad/s

iii) The linear velocity is approximately 1.047 m/s

iv) The centripetal acceleration is approximately 6.98 m/s²

Explanation:

The given parameters are;

The number of revolution of the particle, n = 800 revolution

The time it takes the particle to make 800 revolutions = 4 minutes

The dimension of the circle = 5 cm = 0.05 m

Given that the dimension of the circle is the radius of the circle, we have;

i) The period of the particle, T = The time to complete one revolution

T = 1/(The number of revolutions per second)

∴ T = 1/(800 rev/(4 min × 60 s/min)) = 3/10 s

The period, T = 3/10 seconds = 0.3 seconds

ii) The angular velocity, ω = Angle covered/(Time)

800 revolutions in 4 minutes = Angle of (800 × 2·π) in 4 minutes

∴ ω = (800 × 2·π)/(4 × 60) = 20·π/3

The angular velocity, ω = 20·π/3 rad/s ≈ 20.94 rad/s

iii) The linear velocity, v = r × ω

∴ The linear velocity, v = 0.05 m × 20·π/3 rad/s = π/3 m/s ≈ 1.047 m/s

iv) The centripetal acceleration, [tex]a_c[/tex] = v²/r

∴ The centripetal acceleration, [tex]a_c[/tex] = (π/3)²/(0.05) = 20·π/9

The centripetal acceleration, [tex]a_c[/tex] = 20·π/9 m/s² ≈ 6.98 m/s²

Answer

I am not sure but it is may be 50J

I hope that's, this answer is fine.

A forest ecosystem describes the community of plants, animals, microbes and all other organisms in interaction with the chemical and physical features of their environment: Specifically, a terrestrial environment dominated by trees growing in a closed canopy — a forest, in other words.

Hope this helps you buddy! :)

We know

[tex]\boxed{\sf Relative\:velocity(V_{AB})=V_A-V_B}[/tex]

[tex]\\ \sf\longmapsto V_{AB}=2-2[/tex]

[tex]\\ \sf\longmapsto V_{AB}=0m/s[/tex]

The vector difference between the velocities of two bodies : the velocity of a body with respect to another regarded as being at rest  compare relative motion

[tex]Relative velocity $\left(\mathrm{V}_{\mathrm{AB}}\right)=\mathrm{V}_{\mathrm{A}}-\mathrm{V}_{\mathrm{B}}$$$\begin{aligned}&\longmapsto \mathrm{V}_{\mathrm{AB}}=2-2 \\&\longmapsto \mathrm{V}_{\mathrm{AB}}=0 \mathrm{~m} / \mathrm{s}\end{aligned}$$[/tex]

The relative velocity of an object with respect to another is the velocity with which one object moves with respect to another object. The unit of velocity can be referred to as the ratio of unit of distance and that of time. The SI unit of Relative velocity is meter per second.

The concept of absolute velocity is mainly used in turbomachinery design and defines the velocity of a fluid particle in relation to the surrounding, stationary environment. Together with the relative velocity (w) and the circumferential speed (u), it forms the velocity triangle.

To learn more about relative velocity, refer

https://brainly.com/question/24430414

#SPJ2

Answer:

a. 0

b. 1.103625 MJ

c. Conserved

d. 1.103625/n MJ where n = The number of forces

Explanation:

The mass of the drone, m = 750 kg

The upward lift force = 125% of the weight of the drone

The time it takes the drone to reach a height of 250 m = 25 seconds

a. The mechanical energy = The kinetic energy + Potential energy

Therefore, given that the drone stars motion from the surface and was initially at rest, the mechanical energy at the surface = 0

b. The mechanical energy at height, h = 150 m, ME₁₅₀ = The potential energy gained = m·g·h

Where;

g = The acceleration due to gravity = 9.81 m/s²

∴ ME₁₅₀ = 750 kg × 9.81 m/s² × 150 m = 1103625 J = 1.103625 MJ

c. The mechanical energy is equivalent to the potential energy of the drone at the 150 m height, therefore, it is conserved

d. The work done by the force = The energy gained

Therefore, where there are n number of forces, the work done by each force = 1.103625/n MJ

Answer:

1. a. 3,000 N

b. Repulsión

2. 46.875 × 10⁶ N/C

3. a. 81,000 J

b. 6.75 × 10⁹ V

Explanation:

1. Los parámetros dados son;

Q₁ = +12 μC, Q₂ = +16 μC

La distancia entre las cargas, r = 0.024

La magnitud de la fuerza electrostática, F, entre cargas se da como sigue;

[tex]F = k \times \dfrac{Q_1 \cdot Q_2}{r^2}[/tex]

Donde, k = constante de Coulomb = 9.0 × 10⁹ N · m² / C²

Por lo tanto, obtenemos;

F = 9.0 × 10⁹ × 12 × 10⁻⁶ × 16 × 10⁻⁶ / 0.024² = 3.000

La magnitud de la fuerza electrostática, entre las cargas, F = 3000 N

(b) Dado que tanto Q₁ como Q₂ son cargas positivas, y las cargas iguales se repelen entre sí, la fuerza es la repulsión.

2) La intensidad de un campo eléctrico, E, se da como sigue;

[tex]E = \dfrac{k \cdot Q}{r^2}[/tex]

La magnitud de la carga, Q = 24 μC

La distancia donde se mide el campo, r = 48 mm = 0.048 m

Por lo tanto, E = 9.0 × 10⁹ × 12 × 10⁻⁶ / 0.048² = 46,875,000 N / C

La intensidad de un campo eléctrico, E = 46,875,000 N / C = 46.875 × 10⁶ N / C

3. La magnitud de las cargas son;

Q₁ = 24 mC

Q₂ = -12 μC

La distancia entre las cargas, r = 0.032 m

un. El potencial eléctrico de una carga, [tex]U_E[/tex] , se da de la siguiente manera;

[tex]U_E = k \times \dfrac{Q_1 \cdot Q_2}{r}[/tex]

Por lo tanto;

[tex]U_E[/tex] = 9.0×10⁹ × 24 × 10⁻³ × (-12) × 10⁻⁶ /0.032 = -81,000

La energía potencial eléctrica entre la carga, Q₁ y Q₂= -81,000 J

b. El potencial eléctrico de Q₁ en Q₂, V₁ = [tex]k \times \dfrac{Q_1 }{r}[/tex]

Por lo tanto, V₁ = 9.0×10⁹ × 24 × 10⁻³/0.032 = 6.75 × 10⁹

El potencial eléctrico de Q₁ en Q₂, V₁ = 6.75 × 10⁹ V

These two forces are called action and reaction forces and are the subject of Newton's third law of motion. Formally stated, Newton's third law is: For every action, there is an equal and opposite reaction. The statement means that in every interaction, there is a pair of forces acting on the two interacting objects.

Answer:

The motion of the moon around the earth is circular motion

Explanation:

Answer:

Reduction in recoverable amount

Explanation:

Impairment of an asset happens when there is drastic reduction in recoverable amount of the asset. Long term assets are at risk of impairment because their carrying values may exceed the fair value. The business record it as a loss in assets value.

Answer:

The speed of water is 32.2 m/s .

Explanation:

Mass of squid, M = 1.5 kg

mass of water, m = 0.12 kg

velocity of squid, V = - 2.8 m/s

Let the speed of water is v.

Use the conservation of momentum,

Momentum before expelling the water  momentum after expelling water

M x 0 = (M - m) x V + m x v

0 = - (1.5 - 0.12) x 2.8 + 0.12 v

3.864 = 0.12 v

v = 32.2 m/s

here's the answer to your question

Answer:

wah wats this again

Explanation:

Bhai mujhe samaj nahi ah Raha

Kya Bolne Chahtaa hu tum

Answer:

bạn vẽ ra rồi làm

Explanation:

Answer:

Cause of Inertia of Motion

Explanation:

It can be explained as follows...when the moving bus suddenly stops, the lower part of the body of the passenger contact with the bus suddenly comes to rest while the upper part of the body tends to retain its state of motion due to inertia. As a result, the passenger is thrown forward.

Answer:

D. 25 / π Spiral / m

Explanation:

Given;

current, I = 5 A

magnetic field strength, B = 50 μT = 50 x 10⁻⁶ T

The magnetic field strength is given as;

[tex]B = \mu_0 nI\\\\where;\\\\\mu_0 \ is \ permeability \ of \ free \ space = 4\pi \times 10^{-7} T/A.m\\\\n \ is \ the \ number \ of \ spirals \ per \ length\\\\n = \frac{B}{\mu_0 I} = \frac{50 \times 10^{-6}}{5\times 4\pi \times 10^{-7}} = \frac{25}{\pi } \ spirals /m \\\\[/tex]

Therefore, the correct option is D. 25 / π Spiral / m

Answer:

nods 40th anniversary rid off e 49en9 snns

Answer:

A. 1.66 N/Kg or m/s²

B. 99.6 N

Explanation:

A. Determination of the acceleration due to gravity of the moon.

Mass of the moon (Mₘ) = 7.2×10²² Kg

Radius of the moon (rₘ) = 1.7×10⁶ m

Gravitational constant (G) = 6.67×10¯¹¹ Nm²/Kg²

Acceleration due to gravity of the moon (gₘ)

gₘ = GMₘ / rₘ²

gₘ = (6.67×10¯¹¹ × 7.2×10²²) / (1.7×10⁶)²

gₘ = 1.66 N/Kg

Acceleration due to gravity on the moon is 1.66 N/Kg or m/s²

B. Determination of the weight of a 60 kg person on the moon.

Acceleration due to gravity of the moon (gₘ) = 1.66 N/Kg

Mass of person (m) = 60 Kg

Weight on the moon (Wₘ) =?

Wₘ = m × gₘ

Wₘ = 60 × 1.66

Wₘ = 99.6 N

Thus, the weight of a 60 kg person on the moon is 99.6 N

Answer:

Momentum of system = 37.2 Kgm/s.

Explanation:

Given the following data;

To find the momentum of the system;

Momentum can be defined as the multiplication (product) of the mass possessed by an object and its velocity. Momentum is considered to be a vector quantity because it has both magnitude and direction.

Mathematically, momentum is given by the formula;

Momentum = mass * velocity

For object A;

Momentum A = 5 * 6

Momentum A = 30 Kgm/s

For object B;

Momentum B = 12 * 0.6

Momentum B = 7.2 Kgm/s

Next, we would determine the momentum of this system using the formula;

Momentum of system = Momentum A + Momentum B

Substituting the values into the formula, we have;

Momentum of system = 30 + 7.2

Momentum of system = 37.2 Kgm/s.