g Light that is incident upon the eye is refracted several times before it reaches the retina. As light passes through the eye, at which boundary does most of the overall refraction occur?

Answer:

2164 Hz

Explanation:

Since point P is 4.70 m away from one speaker and 3.60 m away from the other speaker, the path length difference ΔL = 4.70 m - 3.60 m = 1.1 m.

The path length difference ΔL = nλ for a constructive interference where n is an integer and λ = wavelength of sound from oscillator = v/f where v = speed of sound in air = 340 m/s and f = frequency of sound from oscillator.

So, ΔL = nλ = nv/f

So, the frequency from the oscillator is f = nv/ΔL

Substituting the values of v and ΔL into the equation, we have

f = nv/ΔL

f = n340 m/s/1.1 m

f = n309.09 /s

f = 309.09n Hz

We now insert values of n that will gives us a frequency in the range 1908 Hz to 2471 Hz.

The value of n that will give us a frequency in the range is n = 7

So, when n = 7,

f = 309.09n Hz

f = 309.091 × 7 Hz

f = 2163.64 Hz

f ≅ 2164 Hz

So, the frequency of the oscillator that will produce a constructive interference at P is 2164 Hz.

Answer:

[tex]E=35921.96N/C[/tex]

Explanation:

From the question we are told that:

Radius [tex]r=0.321mm[/tex]

Charge Density [tex]\mu=0.100[/tex]

Distance [tex]d= 5.00 cm[/tex]

Generally the equation for electric field is mathematically given by

[tex]E=\frac{mu}{2\pi E_0r}[/tex]

[tex]E=\frac{0.100*10^{-6}}{2*3.142*8.86*10^{-12}*5*10^{-2}}[/tex]

[tex]E=35921.96N/C[/tex]

Answer:

a) Fnet = mg - Fb - Fr

b) 8.67 secs

Explanation:

mass of object = 80 kg

Buoyancy force = 1/50 * weight ( 80 * 9.81 ) = 15.696

Proportionality constant = 10 N-sec/m

a) Calculate  equation of motion of the object

Force of resistance on object  due to water = Fr ∝ V

                                                                         = Fr = Kv = 10 V

Given that : Fb( due to buoyancy ) , Fr ( Force of resistance ) acts in the positive y-direction on the object  while mg ( weight ) acts in the negative y - direction on the object.

Fnet = mg - Fb - Fr

∴ Equation of motion of the object ( Ma = mg - Fb - Fr )

b) Calculate how long before velocity of the object hits 40 m/s

Ma = mg - Fb - Fr

a = 9.81 - 0.1962 - 0.125 V = 9.6138 - 0.125 V

V = u + at ---- ( 1 )

u = 0

V = 40 m/s

a = 9.6138 - 0.125 V

back to equation 1

40 = 0 + ( 9.6138 - 0.125 (40) ) t

40 = 4.6138 t

∴ t = 40 / 4.6138 = 8.67 secs

Answer:

TRUE

Explanation:

Answer:

If decreased blood pressure is detected, the adrenal gland is stimulated by these stretch receptors to release aldosterone, which increases sodium reabsorption from the urine, sweat, and the gut. This causes increased osmolarity in the extracellular fluid, which will eventually return blood pressure toward normal.

Answer:

The initial velocity is 1.27 m/s.

Explanation:

distance, s = 1.8 m

acceleration, a = - 0.45 m/s^2

final velocity, v = 0

let the initial velocity is u.

Use third equation of motion

[tex]v^2 = u^2 + 2 a s \\\\0 = u^2 - 2 \times 0.45\times 1.8\\\\u = 1.27 m/s[/tex]

We have that the Initial velocity  is mathematically given as

u=1.27m/s

Question Parameters:

a slight push toward an end stop 1.80 meters away

he fan of the cart engages and slows the cart with an acceleration of -0.45 m/s2

Generally the equation for the  third equation of motion    is mathematically given as

Vf^2 = Vi^2 + 2ad

Therefore

0=u^2+0.45*1.8

u=1.27m/s

For more information on velocity visit

https://brainly.com/question/17617636

Answer:

φ = 13.43 x 10⁻¹⁹ J = 8.4 eV

Explanation:

Using the Einstein's Photoelectric equation:

Energy of Photon = Work Function + Kinetic Energy of Electron

[tex]\frac{hc}{\lambda} = \phi + K.E[/tex]

where,

h = Plank's Constant = 6.625 x 10⁻³⁴ J.s

c = speed of light = 3 x 10⁸ m/s

λ = wavelength = 124 nm = 1.24 x 10⁻⁷ m

φ = work function = ?

K.E = Kinetic Energy of Electrons = (4.16 eV)([tex]\frac{1.6\ x\ 10^{-19}\ J}{1\ eV}[/tex]) = 2.6 x 10⁻¹⁹ J

Therefore,

[tex]\frac{(6.625\ x\ 10^{-34}\ J.s)(3\ x\ 10^8\ m/s)}{1.24\ x\ 10^{-7}\ m} = \phi + 2.6\ x\ 10^{-19}\\\\\phi=16.03\ x\ 10^{-19}\ J - 2.6\ x\ 10^{-19}\ J[/tex]

φ = 13.43 x 10⁻¹⁹ J = 8.4 eV

Answer:

The launched angle θ = 30 degrees, the initial velocity Vo = 20 m/s, the initial horizontal velocity Vox= ?, the initial vertical velocity Voy = ?, the time of flight t = ? the maximum height h = ?

Vox = Vo * (cos of 30 degrees)

Voy = Vo * (sin of 30 degrees)

t = 2 * (Voy / g)

h = Voy * 0.5 t - 1/2 g * (0.5t)^2

I have given the equations for you to use, just plug – in the values and then solve in a step by step manner.

Answer:

approximately 15.68 meters.

Explanation:

Here is how;

First, let's calculate the time of flight for the t-shirt. We can use the vertical motion equation:

y = y0 + v0y * t - 0.5 * g * t^2

where:

y is the vertical displacement (27.7 m)

y0 is the initial vertical position (0 m)

v0y is the vertical component of the initial velocity (v0 * sin(theta))

g is the acceleration due to gravity (9.8 m/s^2)

t is the time of flight

Plugging in the values:

27.7 = 0 + (25.8 * sin(63.6°)) * t - 0.5 * 9.8 * t^2

Simplifying the equation, we get a quadratic equation:

4.9t^2 - (25.8 * sin(63.6°))t + 27.7 = 0

Solving this quadratic equation will give us the time of flight, t. Using the quadratic formula, we find that:

t ≈ 1.23 s

Now, let's find the horizontal displacement of the t-shirt using the horizontal motion equation:

x = x0 + v0x * t

where:

x is the horizontal displacement

x0 is the initial horizontal position (0 m)

v0x is the horizontal component of the initial velocity (v0 * cos(theta))

t is the time of flight

Plugging in the values:

x = 0 + (25.8 * cos(63.6°)) * 1.23

Calculating this:

x ≈ 14.92 m

The t-shirt falls short of reaching the person by the horizontal distance of:

Shortfall = 30.6 m - 14.92 m

Calculating this:

Shortfall ≈ 15.68 m

Therefore, the t-shirt will be approximately 15.68 meters short of reaching the person.

Answer: D. 0 m

Explanation:

Concept:

Here, we need to know the concept of displacement.

Displacement is defined to be the change in position of an object.

The difference between displacement and distance is the total movement of an object without any regard to direction, while displacement is the pure change of position.

If you are still confused, please refer to the attachment below for a graphical explanation.

Solve:

STEP ONE: the boy walks from point C to point D (a distance of 50 m)

C ⇒ ⇒ ⇒ ⇒ ⇒ ⇒ ⇒ ⇒ ⇒ ⇒ ⇒ ⇒ ⇒ ⇒ ⇒ ⇒ ⇒ ⇒ ⇒ ⇒ ⇒ ⇒ ⇒ ⇒ ⇒ D

                                              50 m

STEP TWO: the boy walks from point D to point C (a distance of 50 m)

D ⇒ ⇒ ⇒ ⇒ ⇒ ⇒ ⇒ ⇒ ⇒ ⇒ ⇒ ⇒ ⇒ ⇒ ⇒ ⇒ ⇒ ⇒ ⇒ ⇒ ⇒ ⇒ ⇒ ⇒ ⇒ C

                                               50 m

STEP THREE: find the displacement

The boy started with point C

The boy ended with point C

He did not change his position throughout the journey.

Therefore, his displacement is 0 m.

Hope this helps!! :)

Please let me know if you have any questions

Answer:

Explanation:

The formula for determining the Emf induced in a loop is:

[tex]\varepsilon = \dfrac{d \phi}{dt}[/tex]

[tex]\varepsilon = \dfrac{d (B*A)}{dt}[/tex]

[tex]\varepsilon = A \times \dfrac{dB}{dt}[/tex]

[tex]\varepsilon = (side (l))^2 \times \dfrac{dB}{dt}[/tex]

where;

square area A = ( l²)

l² = 6.0 cm = 6.0 × 10⁻²

∴

[tex]\varepsilon = ( 6.0 \times 10^{-2})^2 \times 5.0 \times 10^{-3} \ T/S[/tex]

[tex]\varepsilon =18 \times 10^{6} \ V[/tex]

Recall that:

The resistivity of copper = [tex]1.68 \times 10^{-8}[/tex] ohm m

We can as well say that the length of the copper wire = perimeter of the square loop;

The perimeter of the square loop = 4L

Thus, the length of the copper wire  = 4 (6.0 × 10⁻² )m

= 24× 10⁻² m

Finally, the current in the loop is determined from the formula:

V = IR

where,

V = voltage

I = current and R = resistance of the wire

Making "I" the subject:

I = V/R

where;

[tex]R = \dfrac{\rho \times l}{A}[/tex]

[tex]R = \dfrac{\rho \times l}{\pi * r^2}[/tex]

[tex]R = \dfrac{1.68 *10^{-8} \times 24*10^{-2}}{\pi * (1*10^{-3})^2}[/tex]

[tex]R = 0.001283 \ ohms[/tex]

∴

[tex]I = \dfrac{18*10^{-6}}{0.001283}[/tex]

I = 14.029 mA

Solution :

Whenever the lightbulbs are used as resistors, we throw the switch to the left. This allows the current to flow through the circuit which causes the bulb to glow and also the capacitor gets charged. When the capacitor gets fully charged, the electric field becomes constant between its two plates. Now there is no displacement current induced in the plates of the capacitor. The capacitor works as an open switch and the bulb gets switched off.

And thus the bulb flashes for the moment as opposed to continuous glow.

Answer:

15.88m/s

Explanation:

At the top of the roller coaster you will have three forces acting on the roller-coaster. See the image below. Fc is the centripetal force (for an object in circular motion), Fg is the gravitational force, and Fn is the normal force. To achieve the minimum speed we assume the roller-coaster is barely touching the vertical loop and so the normal force is zero. This leaves two acting forces.

[tex]F_g = F_c\\mg = \frac{m\times v^2}{r}\\v = \sqrt{gr} = \sqrt{9.81 \times 25.7} = 15.88 m/s[/tex]

Answer:

0

Explanation:

The speed of the ball when it reaches the floor is 0 because when an object is at rest or in uniform motion, it has no speed/velocity

The final speed of the ball when it reaches the floor is 7.10 m/s.

The conservation of energy is a fundamental principle in physics that states that energy cannot be created or destroyed, but only converted from one form to another or transferred from one system to another. In other words, the total amount of energy in a closed system remains constant over time, even though it may be converted from one form to another.

This principle is based on the first law of thermodynamics, which states that the total energy of a closed system is always conserved, and can only be changed by the transfer of heat, work, or matter into or out of the system. The conservation of energy has important applications in various fields of physics, including mechanics, thermodynamics, and electromagnetism, and is a fundamental principle in the understanding of the natural world.

Here in the Question,

We can use the conservation of energy to solve this problem. Initially, the ball has kinetic energy due to its motion on the tabletop, but no potential energy since it is at a constant height. When the ball rolls off the edge of the table, it loses some kinetic energy due to friction but gains potential energy as it moves upward. When it reaches the floor, it has gained potential energy but lost kinetic energy due to friction. We can assume that the energy lost due to friction is converted to thermal energy, so the total energy of the system is conserved.

Let's start by calculating the potential energy gained by the ball as it moves from the edge of the table to the floor:

ΔPE = mgh

where ΔPE is the change in potential energy, m is the mass of the ball, g is the acceleration due to gravity, and h is the vertical distance traveled by the ball.

ΔPE = (0.50 kg)(9.81 m/s^2)(1.0 m) = 4.905 J

Now we can use the conservation of energy to find the final kinetic energy of the ball, which will allow us to calculate its final speed:

KEi + ΔPEi = KEf + ΔPEf

where KEi and ΔPEi are the initial kinetic and potential energies of the ball, respectively, and KEf and ΔPEf are the final kinetic and potential energies of the ball, respectively.

Since the ball is not bouncing, we can assume that its initial and final potential energies are zero. Therefore:

KEi = KEf + ΔKE

where ΔKE is the change in kinetic energy due to friction.

We can assume that the coefficient of kinetic friction between the ball and the incline is constant, and use the work-energy principle to find ΔKE:

Wfric = ΔKE

where Wfric is the work done by friction.

The work done by friction can be expressed as:

Wfric = ffricd

where ffric is the force of friction and d is the distance traveled by the ball on the incline.

The force of friction can be expressed as:

ffric = μmg

where μ is the coefficient of kinetic friction, and m and g have their usual meanings.

Putting it all together, we get:

KEi = KEf + ffricd

KEi = KEf + μmgd

(1/2)mv^2 = (1/2)mu^2 + μmgd

v^2 = u^2 + 2gd

where u is the initial speed of the ball on the tabletop, and v is the final speed of the ball on the floor.

Plugging in the given values, we get:

v^2 = (5.0 m/s)^2 + 2(9.81 m/s^2)(1.0 m)

v^2 = 50.405

v = 7.10 m/s

Therefore, the final speed of the ball when it reaches the floor is 7.10 m/s.

To learn more about  the Law of Conservation of Momentum click:

https://brainly.com/question/30487676

#SPJ2

Answer:

Option D.

Explanation:

From the question given above, the following data were obtained:

Force applied (F) = 5 N

Extention (e) = 0.075 m

Spring constant (K) =?

The spring constant for the spring can be obtained as follow:

F = Ke

5 = K × 0.075

Divide both side by 0.075

K = 5 / 0.075

K = 67 N/m

Thus, the spring constant for the spring is 67 N/m

From the ideal gas law,

PV = nRT   ==>   P = nRT/V

where P is the pressure exerted by the gas on the container. The work W done by this pressure as the volume of the gas changes from V₁ to V₂ is given by the integral,

[tex]W = \displaystyle \int_{V_1}^{V_2}P\,\mathrm dV \implies W = nRT \ln\left(\dfrac{V_2}{V_1}\right)[/tex]

and solving for V₂ gives

[tex]V_2 = V_1\exp\left(\dfrac{W}{nRT}\right)[/tex]

If you add 1.7 kJ of heat to the system, which does the aforementioned work, the gas will expand to a volume of

[tex]V_2 = (23\,\mathrm L)\exp\left(\dfrac{1.7\,\mathrm{kJ}}{(3.1\,\mathrm{mol})\left(8.314\frac{\rm J}{\mathrm{mol}\cdot\mathrm K}\right)(320\,\mathrm K)}\right) \approx \boxed{28 \,\mathrm L}[/tex]

Answer:

Q at the center of the distribution.

Explanation:

Answer:

A green object will absorb all light except for green light and reflect blue and yellow light.

Answer:

to prevent friction on the surfaces

Answer:

Explanation:

Oiling reduces friction between parts with relative motion between them.

Repeated oiling is needed as the film of oil reducing the friction becomes thinner with time as some of the oil gets pushed off of the areas of motion where it can no longer be useful.

Oil also becomes oxidized which reduces the oil's ability to decrease friction.

Oil can also be fouled by dirt, lint or other material. This added material becomes coated in oil and typically gets sequestered away from the moving parts reducing the oil available for lubrication purposes.

Answer:

147 Newtons

Explanation:

To find tension, you can use the formula Tension = (mass)(gravity)

*Gravity's acceleration = 9.8 m/s^2 because of Newton's law of universal gravitation*

T = (15kg)(9.8m/s^2)

  = 147 Newtons

Hope this helps! Best of luck <3

Answer:

1. True

2. False

3. True

4. True

5. True

Answer:

that is pure falsereeeeeeeee

Explanation:

Answer:

The total surface area is "90 km²".

Explanation:

Given:

Power from solar installations,

= 27 GW

Other natural installations,

= 740 GW

Intensity,

[tex]\frac{F}{At}=\frac{P}{A}=1000 \ W/m^2[/tex]

%n,

= 30%

Now,

⇒ %n = [tex]\frac{out.}{Inp.}\times 100[/tex]

then,

⇒ [tex]Inp.=\frac{27}{30}\times 100[/tex]

           [tex]=90 \ GW[/tex]

As we know,

⇒ [tex]I=\frac{P}{A}[/tex]

by substituting the values, we get

[tex]1000=\frac{90\times 10^9}{A}[/tex]

    [tex]A = \frac{90\times 10^9}{10^3}[/tex]

        [tex]=90\times 10^6[/tex]

        [tex]=90 \ km^2[/tex]

Answer:

The total length of wire is 0.24 m.

Explanation:

Number of turns, N = 270

magnetic field, B = 0.48 T

frequency, f = 60 Hz

rms value of emf = 120 V

maximum value of emf, Vo = 1.414 x 120 = 169.68 V

let the area of square is A and the side is L.

The maximum emf is given by

Vo = N B A w

169.68 = 270 x 0.48 x A x 2 x 3.14 x 60

A = 3.5 x 10^-3 m^2

So,

L = 0.0589 m

Total length of wire, P = 4 L = 4 x 0.0589 = 0.24 m

Answer:

Types of tidal turbines

Axial turbines.

Crossflow turbines.

Flow augmented turbines.

Oscillating devices.

Venturi effect.

Tidal kite turbines.

Turbine power.

Resource assessment.

Answer:

Axial turbines

Crossflow turbines

flow augmented turbines

Answer:

download the pdf

Explanation:

Answer:

T1 = 736.6 N, T2 = 193.5 N

Explanation:

W = 76 N

The tension is T1 and T2.

By use of Lami's theorem

[tex]\frac{T_1}{Sin100}=\frac{T_2}{Sin165}=\frac{W}{Sin 95}\\\\So, \\\\T_1 = \frac{76\times 9.8\times Sin 100}{Sin 95} = 736.6 N \\And\\T_2 = \frac{76\times 9.8\times Sin 165}{Sin 95} = 193.5 N \\[/tex]

Answer:

0.023 Ohms

Explanation:

Given data

Length= 2.8m

radius= 1.03mm

current I= 1.35 A

voltage V= 0.032V

We know that from Ohm's law

V= IR

Now  R= V/I

Substitute

R= 0.032/1.35

R= 0.023 Ohms

Hence the resistance is 0.023 Ohms

Answer:

Explanation:

(a)Solving for the acceleration of the bullet

acceleration = (vf^2 – vi^2) / 2d

acceleration = ((280 m/s)^2 – (420 m/s)^2) / (2 * 0.12 m)

acceleration = (78400 - 176400) / 0.24 m

acceleration = -98000 / 0.24

acceleration = -408333 m/s^2

(a)Solving for contact time with board

t^2 = 2d/a

t^2 = 2 * 0.12 m / 408333 m/s^2

t^2 = 0.24 m / 408333 m/s^2

t^2 = 5.8775558 x 10^-7

t = 0.0007666 s or 767 microseconds

Answer:

Answer:

vdhdbdnnsnsbdhhshzbhshsbbsbd is not ask you to be able and r in the exam qq and

Answer:

Their main disadvantage is that they are fairly easy to break and if they do, it results in small splinters of glass and the release of mercury which is quite toxic if absorbed into the body.